Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Mechanical Engineering (34)
- Chemical Engineering (25)
- Electrical and Computer Engineering (25)
- Civil and Environmental Engineering (24)
- Computer Engineering (24)
-
- Civil Engineering (23)
- Electrical and Electronics (23)
- Ocean Engineering (23)
- Structural Engineering (23)
- Manufacturing (11)
- Structural Materials (9)
- Other Materials Science and Engineering (5)
- Engineering Science and Materials (4)
- Mechanics of Materials (3)
- Applied Mechanics (2)
- Heat Transfer, Combustion (2)
- Other Engineering Science and Materials (2)
- Physical Sciences and Mathematics (2)
- Advertising and Promotion Management (1)
- Architecture (1)
- Biomedical Devices and Instrumentation (1)
- Biomedical Engineering and Bioengineering (1)
- Business (1)
- Ceramic Materials (1)
- Chemistry (1)
- Computer-Aided Engineering and Design (1)
- Construction Engineering (1)
- Institution
-
- Universitas Indonesia (23)
- Missouri University of Science and Technology (13)
- California Polytechnic State University, San Luis Obispo (8)
- Chulalongkorn University (7)
- The University of Akron (5)
-
- Michigan Technological University (3)
- University of Louisville (3)
- Montana Tech Library (2)
- University of Malaya (2)
- Boise State University (1)
- Georgia Southern University (1)
- Kettering University (1)
- LSU New Orleans (1)
- Louisiana State University (1)
- Old Dominion University (1)
- Portland State University (1)
- San Jose State University (1)
- University of Central Florida (1)
- University of Denver (1)
- University of North Florida (1)
- Western Michigan University (1)
- Wright State University (1)
- Keyword
-
- Fatigue (3)
- Additive manufacturing (2)
- Bandpass filter (2)
- Distributed Sensing (2)
- Golf (2)
-
- Inconel 718 (2)
- Ionic conductivity (2)
- Manufacturing (2)
- Materials Engineering (2)
- Mechanical properties (2)
- Microstrip (2)
- Optical Fiber (2)
- Optical Frequency Domain Reflectometry (2)
- Optimization (2)
- Resonator (2)
- Stainless steel (2)
- Temperature Sensor (2)
- Titanium (2)
- Ultra wideband (2)
- Welding (2)
- 304 Stainless Steel (1)
- AISC 360-16 (1)
- AISI 304L stainless steel corrosion (1)
- Academic -- UNF -- Engineering; Very high cycle fatigue; Nickel-based superalloy; surface effects; Anisotropy; Additive manufacturing (1)
- Academic -- UNF -- Master of Science in Mechanical Engineering; Dissertations (1)
- Additive manufacturing of titanium alloy (1)
- Affective redesign (1)
- Age Hardening (1)
- Al alloy (1)
- Alginate (1)
- Publication
-
- Makara Journal of Technology (23)
- Materials Science and Engineering Faculty Research & Creative Works (13)
- Materials Engineering (8)
- Chulalongkorn University Theses and Dissertations (Chula ETD) (7)
- Williams Honors College, Honors Research Projects (5)
-
- Electronic Theses and Dissertations (4)
- Dissertations, Master's Theses and Master's Reports (3)
- Graduate Theses & Non-Theses (2)
- Student Works (2020-2029) (2)
- Boise State University Theses and Dissertations (1)
- Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Materials (1)
- Electronic Theses and Dissertations, 2020-2023 (1)
- Engineering Technology Faculty Publications (1)
- Faculty Publications (1)
- Honors College Theses (1)
- LSU New Orleans Theses and Dissertations (1)
- Library Philosophy and Practice (e-journal) (1)
- Masters Theses (1)
- Mechanical Engineering Publications (1)
- Mechanical and Materials Engineering Faculty Publications and Presentations (1)
- UNF Graduate Theses and Dissertations (1)
- Publication Type
Articles 61 - 79 of 79
Full-Text Articles in Metallurgy
Modeling Of Scrap Dissolution In Molten Iron For The Case Of Heat Transfer-Controlled Process By Different Approaches And Comparison Of Their Accuracies, Ajay Kumar Shukla, Brahma Deo, D. G.C. Robertson
Modeling Of Scrap Dissolution In Molten Iron For The Case Of Heat Transfer-Controlled Process By Different Approaches And Comparison Of Their Accuracies, Ajay Kumar Shukla, Brahma Deo, D. G.C. Robertson
Materials Science and Engineering Faculty Research & Creative Works
Dissolution of steel scrap in molten iron is studied by using analytical as well as numerical approaches for the case of a heat transfer-controlled process. The approaches used are Green's function approach, quasi-static approach, integral profile method (IPM) (with parabolic profile), and finite difference methods (FDM). Application of FDM explicit and FDM implicit with fixed grid and variable grid is described. Accuracy of all the approaches is compared in terms of total dissolution time evaluated from overall heat balance criterion. The selection rule of time step and deciding the suitable approach for achieving minimum error for different operating conditions, represented …
Aging Response On The Stress Corrosion Cracking Behavior Of Wrought Precipitation-Hardened Magnesium Alloy, G. R. Argade, S. K. Panigrahi, R. S. Mishra
Aging Response On The Stress Corrosion Cracking Behavior Of Wrought Precipitation-Hardened Magnesium Alloy, G. R. Argade, S. K. Panigrahi, R. S. Mishra
Materials Science and Engineering Faculty Research & Creative Works
Constant immersion testing and slow strain rate testing (SSRT) are conducted on wrought magnesium alloy in a 3.5 wt.% NaCl solution. After solution annealing (SA) at 525 °C for 8 h, the alloy was isothermally aged at 210 °C for 15 h, 48 h, and 144 h to obtain underaged (UA), peak-aged (PA), and overaged (OA) microstructures, respectively. After 32 days of constant exposure in chloride solution, the SA and UA samples showed the lowest (~ 0.10 mg cm−2 day−1) and the highest (~ 0.20 mg cm−2 day−1) weight loss, respectively. SSRT was carried out at an initial strain rate …
Jominy Hardenability Tester With In-Situ Heating, Luke Allen
Jominy Hardenability Tester With In-Situ Heating, Luke Allen
Williams Honors College, Honors Research Projects
This project centers on building a Jominy Hardenability tester with In-Situ heating for the manufacturing lab at the University of Akron. A new process and setup will be designed using engineering concepts in order to make the testing more efficient and safer for the teaching and testing of metal hardness. The current Jominy testing setup has efficiency issues within the transfer of specimen from induction heater to testing rig. Our design will simplify the design by creating a test rig that removes the traveling aspect of the specimen which will limit the amount of premature cooling done and will be …
The Corrosion Behavior Of Aisi 304l Stainless Steel In Simulated Concrete Pore Solution. And A New Marketing Plan For Stainless Steel Rebars., Kenny Aronson
Williams Honors College, Honors Research Projects
The purpose of this project is to study the corrosion behavior of AISI 304L stainless steel, and to present the results for a new marketing strategy for a steel rebar manufacturer. This experiment involved the usage of cyclic potentiodynamic polarization tests to investigate the effect of chlorides on the pitting corrosion behavior of AISI 304L stainless steel in a simulated concrete pore solution with 3.5 wt.% chlorides. The results of this experiment showed that the chlorides caused a large increase in the corrosion current density of AISI 304L stainless steel indicating increased susceptibility to general corrosion and pitting corrosion. The …
Table Top Dome Tester, Travis Bernard, Sarah Kassinger, Amanda O'Reilly, Scott Salerno
Table Top Dome Tester, Travis Bernard, Sarah Kassinger, Amanda O'Reilly, Scott Salerno
Williams Honors College, Honors Research Projects
The Erichsen Cupping Test was used as a basis to design a dome tester. The intention of a dome tester is to test sheet metal material properties in all directions. This was done by clamping a piece of sheet metal and using a piston and hydraulic press to punch through the material. The force used to punch the material and the height of the deforming material can be gathered and the sheet metal properties can then be calculated. At the end of the project the team was able to successfully design and manufacture a hydraulic dome tester. However, due to …
Galvanic Corrosion In Aluminum/Steel Joints, Maegan Saul
Galvanic Corrosion In Aluminum/Steel Joints, Maegan Saul
Williams Honors College, Honors Research Projects
As car manufacturers seek to use lighter weight materials, aluminum is being more commonly used in the construction of vehicles. However, the strength of steel cannot be matched and both metals are necessary, leading to the joining of dissimilar metals. This connection of different metals leads to a galvanic coupling and subsequent corrosion of the less noble metal. This project aims to observe the corrosion and galvanic coupling behavior of aluminum alloys and carbon steel so that a model may be produced which can accurately predict the expected responses of the metals in various environments. Better, more accurate modeling of …
Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk
Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk
Williams Honors College, Honors Research Projects
The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …
The Effects Of Carbon Equivalent, Return Ratios, Mold Preparation, Riser Feed And Casting Temperature On The Microstructural And Mechanical Properties Of 100-70-03 Pearlitic Ductile Iron, Erin Vandusen
Dissertations, Master's Theses and Master's Reports
The most common and costly detriments to ductile iron foundries are casting defects, particularly in new and complex components. The ability to understand the factors and processes that create microstructures and the associated properties would allow accurate virtual predictions of casting outcomes. An experimental study of standard foundry variables, carbon equivalent, return ratio, mold preparation, riser feed, and casting temperature on a target of 100-70-03 pearlitic, hypereutectic ductile iron provided the groundwork for an ICME database. Density decreased when the fraction of graphite nodules was greater due to the low density of graphite. A greater percentage of return scrap and …
Influence Of Rapid Solidification And Wrought Processing On Precipitation Strengthening And Deformation Mechanisms In Al-Sc-Zr Alloys, Yang Yang
Dissertations, Master's Theses and Master's Reports
Al-Sc-Zr alloys have drawn increasing attention in the last several decades due to their strengthening and coarsening resistance. In this study, solute concentrations of Sc and Zr were increased beyond their equilibrium solubilities without primary precipitate formation using melt-spinning. The melt-spun ribbon was metallurgically bonded into bulk shape using extrusion. With the proper aging treatment, the mechanical properties of the supersaturated melt-spun ribbon and extruded rod were found to be significantly higher than a baseline dilute alloy. Increased mechanical properties include microhardness, tensile strength at ambient-temperature, and compressive strength and threshold stress at and elevated-temperature. These increases were related to …
Artificial Intelligence In Plasma Electrolytic Micro-Oxidation For Surface Hardening - Insights From Scholarly Citation Networks And Patents., Priya Jadhav, Dr.Arun Bongale, Dr.Satish Kumar, Dr.Amit Kumar Tiwari
Artificial Intelligence In Plasma Electrolytic Micro-Oxidation For Surface Hardening - Insights From Scholarly Citation Networks And Patents., Priya Jadhav, Dr.Arun Bongale, Dr.Satish Kumar, Dr.Amit Kumar Tiwari
Library Philosophy and Practice (e-journal)
Objective - The purpose of this article is to analyze the top work areas and patent domains in the field of surface hardening by micro-arc oxidation. Also, it is directed on the opportunities of data analysis by different machine learning tools. Material and methods - The www.lens.org database is used to collect articles from Elsevier, Trans tech publications, Springer New York, MDPI, etc. to review the relevant articles as well as patents related to the topic. The result - A total of 1057 articles were published in 60 different journals and 756 patents in the area of research under various …
ผลของชั้นเคลือบ Tin ที่เตรียมจากวิธีการเคลือบไอทางกายภาพแบบ Dcms และ Hipims ต่อความต้านทานการกัดกร่อนของ Ti-6al-4v ที่ขึ้นรูปด้วยวิธีการพิมพ์สามมิติ, สุรดา นิสัยมั่น
ผลของชั้นเคลือบ Tin ที่เตรียมจากวิธีการเคลือบไอทางกายภาพแบบ Dcms และ Hipims ต่อความต้านทานการกัดกร่อนของ Ti-6al-4v ที่ขึ้นรูปด้วยวิธีการพิมพ์สามมิติ, สุรดา นิสัยมั่น
Chulalongkorn University Theses and Dissertations (Chula ETD)
ไทเทเนียมผสม Ti-6Al-4V เป็นวัสดุทางชีวภาพที่นิยมใช้งานทางการแพทย์ที่ขึ้นรูปโดยการพิมพ์สามมิติถูกเคลือบฟิล์มบาง TiN ด้วยเทคนิค DC magnetron sputtering (DCMS) และ High power impulse magnetron sputtering (HiPIMS หรือ HPPMS) ซึ่งเป็นหนึ่งในเทคนิคการเคลือบไอทางกายภาพ (PVD) โดยเวลาในกระบวนการเคลือบผิวแตกต่างกันคือ 5, 10 และ 25 นาที เทคนิค HiPIMS เป็นเทคนิคการเคลือบผิวที่ได้รับการพัฒนามาจากเทคนิค DCMS แต่เนื่องจาก HiPIMS เกิดการไอออนไนเซชันจากพัลส์พลังงานสูง ความหนาแน่นพลังงานสูงที่ส่งไปยังวัสดุเป้าหมายนั้นอยู่ในระดับ kW/cm2 ในขณะที่เทคนิค DCMS มีความหนาแน่นพลังงานในระดับ W/cm2 สมบัติทางกายภาพและสมบัติทางกลของชั้นเคลือบ TiN ถูกตรวจสอบด้วยกล้องจุลทรรศน์อิเล็กตรอนแบบสแกนภาคสนาม (FE-SEM), X-ray diffractrometer (XRD), กล้องจุลทรรศน์แรงอะตอม (AFM) และทดสอบสมบัติการยึดติด (Scratch test) พฤติกรรมการกัดกร่อนตรวจสอบด้วย electrochemical impedance spectroscopy (EIS), potentiodynamic polarization และ Accelerated cyclic electrochemical technique (ACET) ทดสอบภายใต้สารละลายโซเดียมคลอไรด์ ความเข้มข้น 1 โมลาร์ การเคลือบผิวด้วยเทคนิค HiPIMS นำไปสู้โครงสร้างชั้นเคลือบลักษณะอิควิแอกซ์ที่หนาแน่นมากกว่าโครงสร้างคอลัมนาร์จากเทคนิค DCMS และเทคนิค HiPIMS ยังนำไปสู่การเพิ่มสมบัติทางกลและสมบัติความต้านทานการกัดกร่อนที่ดียิ่งขึ้น นอกจากนี้เวลาที่ใช้ในกระบวนการเคลือบที่นานมากขึ้น นำไปสู่ความต้านทานการกัดกร่อนที่มีประสิทธิภาพมากขึ้น
ผลของซิลิกาจากเถ้าแกลบต่อสมบัติทางกลของมอร์ต้าเมื่อสัมผัสอุณหภูมิสูง, กันตพงศ์ บุญทวี
ผลของซิลิกาจากเถ้าแกลบต่อสมบัติทางกลของมอร์ต้าเมื่อสัมผัสอุณหภูมิสูง, กันตพงศ์ บุญทวี
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้เป็นการนำเถ้าแกลบ ซึ่งเป็นผลพลอยได้จากการนำแกลบข้าวเผาเป็นเชื้อเพลิงในโรงสีข้าว โดยนำมาประยุกต์ใช้ในการเป็นวัตถุดิบสำหรับทดแทนการใช้ปูนซีเมนต์ เพื่อผลิตเป็น มอร์ต้า สำหรับทดสอบความสามารถในการรับแรงอัดเมื่อได้ความร้อนที่อุณหภูมิสูง ซึ่งงานวิจัยนี้แบ่งออกเป็น สอง ส่วน ส่วนที่หนึ่ง เป็นการศึกษาคุณลักษณะและเตรียมเถ้าแกลบที่ได้จากโรงสีข้าวสำหรับในการนำไปผสมปูนซีเมนต์ โดยจะตรวจสอบสารปะกอบทางเคมีของเถ้าแกลบ ด้วย เครื่องวิเคาะห์การเลี้ยวเบนของรังสีเอกซ์ (XRF) ผลที่ได้เถ้าแกลบมีปริมาณ ซิลิกาสูงถึง 93.5 เปอร์เซ็นต์ของน้ำหนัก ซึ่งจะเตรียมเถ้าแกลบผ่านตระแกรงร่อนทั้งหมด 3 เบอร์ โดยจะผสมกับปูนซีเมนต์ที่ปริมาณ 5% 10% และ 15% ของน้ำหนักปูนซีเมนต์ ส่วนที่สอง เป็นการศึกษาสมบัติทางกลและคุณลักษณะของปูนซีเมนต์ผสมเถ้าแกลบก่อนและหลังผ่านอุณหภูมิสูง ที่อายุบ่ม 28 วัน ด้วย กล้องจุลทรรศน์อิเล็กตรอนแบบส่องกวาด (SEM) และเครื่องวิเคาะห์การเลี้ยวเบนของรังสีเอกซ์ (XRD) โดยจะให้ความร้อนชิ้นงาน ที่ 400๐C และ 800๐C เป็นเวลา 1 ชั่วโมง และ ตรวจสอบกำลังอัด กับคุณลักษณะของมอร์ต้า ผลที่ได้มอร์ต้าผสมเถ้าแกลบกำลังอัดมีค่ามากกว่ามอร์ต้าแบบไม่ผสมเถ้าแกลบ ที่อุณหภูมิ 400๐C แต่ที่อุณหภูมิ 800๐C จะมีกำลังอัดใกล้เคียงกัน แต่กำลังอัดโดยรวมที่สูญเสียไปจากการได้รับความร้อน มอร์ต้าที่ผสมเถ้าแกลบมีการสูญเสียกำลังอัดน้อยกว่ามอร์ต้าแบบไม่ผสมเถ้าแกลบ และ จากผลการทดสอบกำลังอัดของมอร์ต้าผสมเถ้าแกลบที่อายุบ่ม 200 วัน พบว่ามีกำลังอัดเพิ่มขึ้นจากการบ่ม 28 วัน ส่วนแนวโน้มของความสามารถในการทนความร้อนเป็นลักษณะเดียวกันกับมอร์ต้าที่บ่ม 28 วัน
Investigation On The Mechanical Properties And Microstructure Analysis Of Micro-Resistance Spot Welding Between Stainless Steel 316l And Tl-6al-4v, Mohd Mansor Muhammad Safwan
Investigation On The Mechanical Properties And Microstructure Analysis Of Micro-Resistance Spot Welding Between Stainless Steel 316l And Tl-6al-4v, Mohd Mansor Muhammad Safwan
Student Works (2020-2029)
In this study, ASS 316L and Ti-6Al-4V were welded together by micro-resistance spot welding (μRSW) at different combinations of welding parameters using specifically design electrode geometry in order to acquire the optimal combination of welding parameters. The welded joint were subjected to tensile shear strength test to determine the influence of welding current, welding time, welding force and different design of elctrode tip on the mechanical properties and the strength of the welded joint. The experiment was conducted by using full factorial design of experiment (DoE) with L27 orthogonal array and utilizing the analysis of variance (ANOVA) to obtain the …
การยับยั้งการก่อตัวของเดนไดรต์ของขั้วสังกะสีแอโนดโดยการเติมกราฟีนออกไซด์ในอิเล็กโทรไลต์สำหรับแบตเตอร์รี่ที่ชาร์จไฟได้ชนิดซิงค์ไอออน, จัฟนี อับดุลลา
การยับยั้งการก่อตัวของเดนไดรต์ของขั้วสังกะสีแอโนดโดยการเติมกราฟีนออกไซด์ในอิเล็กโทรไลต์สำหรับแบตเตอร์รี่ที่ชาร์จไฟได้ชนิดซิงค์ไอออน, จัฟนี อับดุลลา
Chulalongkorn University Theses and Dissertations (Chula ETD)
แบตเตอรี่ซิงค์-ไอออนแบบชาร์จไฟได้ (ZIBs) กำลังได้รับความสนใจมากขึ้นเรื่อยๆ เนื่องจากสังกะสีเป็นธาตุที่อุดมสมบูรณ์มาก ซึ่งกระจายไปทั่วโลกและมีราคาถูกกว่าธาตุอื่นๆ ที่ใช้เป็นอิเล็กโทรดในแบตเตอรี่ ทำให้ ZIB มีต้นทุนต่ำและเป็นมิตรกับสิ่งแวดล้อม ปัญหาประการหนึ่งคือการก่อตัวของเดนไดรต์สังกะสี (Zinc dendrites) บนแอโนดของสังกะสีในระหว่างกระบวนการประจุ/การคายประจุ (Charge/discharge process) ด้วยเหตุนี้ ประสิทธิภาพของแบตเตอรี่จึงลดลง นำไปสู่ปัญหาด้านความปลอดภัยที่ร้ายแรงเนื่องจากเกิดไฟฟ้าลัดวงจร วิทยานิพนธ์นี้อธิบายการเพิ่มอนุภาคกราฟีนออกไซด์ที่เป็นของแข็ง (GO) ลงในอิเล็กโทรไลต์ใน ZIB ทำหน้าที่เป็นสารเติมแต่งของแข็ง (Solid additive) เพื่อเพิ่มอายุการใช้งานอันเป็นผลมาจากการยับยั้งการโตของเดนไดรต์สังกะสีบนพื้นผิวแอโนดสังกะสี เมื่อทดสอบโปรไฟล์แรงดันไฟฟ้า (Voltage profiles) พบว่าความต่างศักย์เกิน (Overpotential) ของแบตเตอรี่ที่ไม่มีสารเติมแต่งของแข็ง GO นั้นสูงกว่าแบตเตอรี่ที่มีสารเติมแต่งของแข็ง GO และแบตเตอรี่ที่มีสารเติมแต่งของแข็ง GO ให้อายุการใช้งานที่เพิ่มขึ้นห้าเท่าภายใต้ความหนาแน่นกระแส 1 mA cm- 2 หลังจากการใช้งานสามารถพบเดนไดรต์สังกะสีในแบตเตอรี่ที่ไม่มีสารเติมแต่ง GO เนื่องจากสนามไฟฟ้าในพื้นที่บนผิวแอโนดสังกะสี GO สามารถปรับปรุงประสิทธิภาพของแบตเตอรี่คูลอมบิก (99.16%) ได้อย่างน่าทึ่ง ผ่านการทำให้ลักษณะการชุบ/ปอกสังกะสีมีเสถียรภาพ (Zn plating/stripping process) และส่งเสริมในการเกิดนิวเคลียสของ Zn2+ ดังนั้น แบตเตอรี่ที่มี GO แสดงการเพิ่มประสิทธิภาพที่โดดเด่นในด้านอัตราและความสามารถในการใช้งานเมื่อเทียบกับอิเล็กโทรไลต์ที่ปราศจากสารเติมแต่ง GO อิเล็กโทรไลต์ไฮบริดที่มีอนุภาคของแข็งจึงเป็นจุดเริ่มต้นของการออกแบบแบตเตอรี่ซิงค์ไอออนขั้นสูงต่อไปในอนาคต
การศึกษาเชิงเปรียบเทียบของกระบวนการเตรียมผิวและการชุบโลหะด้วยไฟฟ้าบนอะคริโลไนไตรล์-บิวทาไดอีน-สไตรีนและพอลิแลคติคแอซิด, วริณธร ศรีสุพรวิชัย
การศึกษาเชิงเปรียบเทียบของกระบวนการเตรียมผิวและการชุบโลหะด้วยไฟฟ้าบนอะคริโลไนไตรล์-บิวทาไดอีน-สไตรีนและพอลิแลคติคแอซิด, วริณธร ศรีสุพรวิชัย
Chulalongkorn University Theses and Dissertations (Chula ETD)
เนื่องด้วยอุตสาหกรรมต่าง ๆ มีความต้องการผลิตภัณฑ์จากการชุบโลหะด้วยไฟฟ้าลงบนพลาสติกที่สูงขึ้น ด้วยเหตุที่สามารถลดน้ำหนักและต้นทุนของผลิตภัณฑ์ได้ แต่การศึกษาและพัฒนาวิธีการเตรียมผิวเพื่อชุบโลหะด้วยไฟฟ้าอย่างมีประสิทธิภาพยังคงมีข้อจำกัดและสามารถใช้ได้กับพอลิเมอร์ชนิด ABS (อะคริโลไนไตรล์-บิวทาไดอีน-สไตรีน) เท่านั้น ซึ่ง ABS เป็นพอลิเมอร์ชนิดที่ไม่สามารถย่อยสลายได้เองตามธรรมชาติ ในขณะที่สังคมต่าง ๆ มีความตระหนักต่อสิ่งแวดล้อมมากยิ่งขึ้น จึงทำให้มีแนวโน้มการใช้งานพอลิเมอร์ชีวภาพที่สามารถย่อยสลายได้เองตามธรรมชาติสูงขึ้น โดย PLA (พอลิแลคติคแอซิด) เป็นพอลิเมอร์ชนิดที่มีการใช้งานกันอย่างแพร่หลาย เนื่องจากสามารถขึ้นรูปได้ง่ายและมีความแข็งแรงสูง แต่ PLA มีโครงสร้างที่แตกต่างกับ ABS จึงทำให้กระบวนการเตรียมผิวเพื่อชุบโลหะด้วยไฟฟ้าที่ใช้ในปัจจุบันไม่สามารถปรับใช้กับ PLA ได้ ในงานวิจัยนี้จึงได้ทำการขึ้นรูปชิ้นงาน ABS และ PLA ด้วยวิธีการพิมพ์ 3 มิติ ระบบ FDM และเตรียมผิวโดย (1) วิธีการกัดผิวและแอคติเวทด้วยแพลเลเดียม, (2) วิธีการเคลือบฟิล์มบางหลายชั้นของพอลิอิเล็กโทรไลต์และแอคติเวทด้วยอนุภาคนาโนของเงิน และ (3) วิธีการทาสีเงินนำไฟฟ้า เพื่อทำการชุบโลหะทองแดงด้วยไฟฟ้าและศึกษาเชิงเปรียบเทียบกับชิ้นงาน ABS ที่เตรียมผิวด้วยวิธีการตามอุตสาหกรรม ซึ่งได้ทำการศึกษาโครงสร้างจุลภาค, องค์ประกอบทางเคมีและประสิทธิภาพในการชุบไฟฟ้าด้วยกล้องจุลทรรศน์แบบใช้แสงและกล้องจุลทรรศน์อิเล็กตรอนแบบส่องกราด และศึกษาความสามารถในการยึดติดของชั้นเคลือบด้วยเทปกาวและการทดสอบรอยขีดข่วน ผลการทดลองแสดงให้เห็นว่าสามารถทำการชุบโลหะด้วยไฟฟ้าลงบนชิ้นงาน ABS และ PLA ที่เตรียมผิวด้วยวิธีต่าง ๆ ได้ โดยอัตราเร็วในการชุบไฟฟ้าของชิ้นงานมีค่าแตกต่างกันในช่วง 1.2-1.9 ไมโครเมตร/นาที ภายหลังการชุบโลหะทองแดงด้วยไฟฟ้าพบว่าชิ้นงานตัวอย่างทั้งหมดมีความสามารถในการนำไฟฟ้าที่ดี โดยพบว่าการเตรียมผิวด้วยวิธีการทาสีเงินนำไฟฟ้าทำให้ชั้นเคลือบมีความสามารถในการยึดตึดสูงกว่าวิธีการเตรียมผิวในปัจจุบัน 1-2 เท่า อย่างไรก็ตามพบว่าวิธีการเตรียมผิวแต่ละวิธีมีข้อได้เปรียบ-เสียเปรียบที่แตกต่างกัน ซึ่งสามารถนำมาใช้ในการศึกษาและพัฒนากระบวนการชุบโลหะด้วยไฟฟ้าลงบนพลาสติกได้ในอนาคต
ผลของการอบคืนตัวต่อสมบัติความแข็งและความแกร่งของเหล็กกล้าไร้สนิมมาร์เทนไซต์เกรด 410, กิตติภัฎ สุวรรณพัชรกุล
ผลของการอบคืนตัวต่อสมบัติความแข็งและความแกร่งของเหล็กกล้าไร้สนิมมาร์เทนไซต์เกรด 410, กิตติภัฎ สุวรรณพัชรกุล
Chulalongkorn University Theses and Dissertations (Chula ETD)
ชิ้นงานเหล็กกล้าไร้สนิมมาร์เทนไซต์เกรด 410 ถูกอบให้โครงสร้างจุลภาคเป็นออสเทไนต์ที่อุณหภูมิ 980 °C จากนั้นเย็นตัวในน้ำมันและอบคืนตัวที่อุณหภูมิ 300, 400, 500 และ 650 °C เป็นเวลา 1 ชั่วโมง ทดสอบค่าความแกร่งแบบชาร์ปีของชิ้นงานที่อุณหภูมิ 25, -20, -50, -60 °C ตามมาตราฐาน ASTM E23 หลังการอบชิ้นงานให้โครงสร้างจุลภาคเป็นออสเทไนต์และการอบคืนตัว พบตะกอนของคาร์ไบด์ในโครงสร้างจุลภาค การอบคืนตัวที่อุณหภูมิ 500 °C ให้ค่าความแข็งสูงที่สุดเนื่องจากมีการตกตะกอนคาร์ไบด์ทุติยภูมิ การอบคืนตัวที่อุณหภูมิ 650 °C ให้ค่าความแข็งต่ำสุด เนื่องจากมีการตกตะกอนของคาร์ไบด์ซึ่งมีสมบัติเปราะที่บริเวณขอบเกรน ทำให้ความแข็งของเนื้อพื้นลดลงเนื่องจากการลดปริมาณคาร์บอนที่ละลายอยู่ในเนื้อพื้น ค่าความแกร่งจะแปรผกผันกับค่าความแข็ง ลักษณะรอยแตกที่ผิวของชิ้นงานที่ผ่านการอบคืนตัวที่อุณหภูมิ 300, 400 และ 500 °C เป็นการแตกผ่ากลางเกรน ในทางกลับกันลักษณะรอยแตกที่ผิวของชิ้นงานหลังการอบคืนตัวที่อุณหภูมิ 650 °C เป็นการแตกตามขอบเกรน จากผลการทดลองสามารถเลือกขั้นตอนการชุบแข็งและการอบคืนตัวที่เหมาะสมของเหล็กกล้าไร้สนิมมาร์เทนไซต์เกรด 410 สำหรับการใช้งานที่อุณหภูมิต่ำเพื่อให้ค่าความแกร่งได้ตามมาตรฐาน ASTM E23
อิทธิพลของเวลาในการแอโนไดเซซันต่อพฤติกรรมการปลดปล่อยยาของท่อนาโนไททาเนียบนชิ้นส่วนโลหะผสมไทเทเนียมที่สร้างด้วยกระบวนการพิมพ์สามมิติ, หทัยชนก ชูเนตร์
อิทธิพลของเวลาในการแอโนไดเซซันต่อพฤติกรรมการปลดปล่อยยาของท่อนาโนไททาเนียบนชิ้นส่วนโลหะผสมไทเทเนียมที่สร้างด้วยกระบวนการพิมพ์สามมิติ, หทัยชนก ชูเนตร์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีวัตถุประสงค์สังเคราะห์ท่อนาโนไททาเนีย บนชิ้นส่วนโลหะผสมไทเทเทียมผสมที่สร้างด้วยกระบวนการพิมพ์สามมิติ และวิเคราะห์พฤติกรรมอัตราการปลดปล่อยยาแวนโคมัยซิน ความเข้มข้น 200 พีพีเอ็ม ภายในเวลา 24 ชั่วโมง โดยประสิทธิภาพกลไกการปลดปล่อยยาจากโครงสร้าง ในระดับนาโน ตรวจสอบโดย การตรวจคุณสมบัติทางเคมีบนพื้นผิว และ การวิเคราะห์ทางแบบจำลองทางจลนศาสตร์ Korsmeyer-Peppas ศึกษาสัณฐานวิทยาของท่อนาโนไททาเนีย ด้วยกล้องจุลทรรศน์อิเล็กตรอนแบบส่องกราดที่มีสมรรถนะสูง และลักษณะทางเคมีบนพื้นผิวของชิ้นส่วนโลหะผสมไทเทเทียมผสมและท่อนาโนไททาเนีย ด้วยเครื่องวัดมุมสัมผัส เครื่องฟูเรียร์ทรานฟอร์มอินฟราเรดสเปกโตรมิเตอร์ และเทคนิคสเปกโตรสโกปีโฟโตอิเล็กตรอน ด้วยรังสีเอ๊กซ์ โดยที่พฤติกรรมการปล่อยยาแวนโคมัยซิน ความเข้มข้น 200 พีพีเอ็ม จากท่อนาโนไททาเนีย ภายใต้สภาวะการควบคุม ในระยะเวลา 24 ชั่วโมง ตรวจวัดโดยใช้เครื่องโครมาโทกราฟีของเหลวสมรรถนะสูง แสดงตำแหน่งรีเทนไทม์อยู่ที่ 2.5 นาที จากการตรวจสอบสัณฐานวิทยาลักษณะพื้นผิว ในระดับนาโน พบว่า ท่อนาโนไททาเนียมีลักษณะคล้ายรังผึ้ง เรียงตัวกันอย่างหนาแน่น และมีการปลดปล่อยสะสมสูงสุด ภายใน 24 ชั่วโมงของยาแวนโคมัยซินอยู่ที่ 34.7% (69.5 พีพีเอ็ม) ตลอดจนคุณสมบัติทางเคมีบนพื้นผิวของชิ้นส่วนไทเทเนียมผสมจากการพิมพ์สามมิติ (68 ± 1 องศา) และท่อนาโนไททาเนีย (0 องศา) แสดงค่ามุมการสัมผัสต่ำกว่า 90 องศา ซึ่งบ่งบอกถึงพื้นผิว มีสมบัติการเปียกผิวที่ดี จากการศึกษาความเข้ากันได้ทางชีวภาพ ด้วยการทดสอบความเป็นพิษต่อเซลล์กระดูกหนู สายพันธ์ุ C57BL/6 ชนิด MC3T3-E1 พบว่า บนพื้นผิวท่อนาโนไททาเนียที่ผ่านกระบวนการแอโนไดเซซัน เป็นเวลา 1 และ 4 ชั่วโมง และ ผ่านการบรรจุยาแวนโคมัยซิน แสดงค่าเปอร์เซ็นต์ความมีชีวิตของเซลล์ที่น้อย อาจเนื่องมาจากวาเนเดียมออกไซด์ฟิล์มชนิด V2O4 และ V2O5 บนพื้นผิวของท่อนาโนไททาเนีย
Effects Of Thiosulfate In Artificial Seawater On Corrosion Behaviour Of 25cr-3ni-7mn-0.66n New Duplex Stainless Steel, Songkran Vongsilathai
Effects Of Thiosulfate In Artificial Seawater On Corrosion Behaviour Of 25cr-3ni-7mn-0.66n New Duplex Stainless Steel, Songkran Vongsilathai
Chulalongkorn University Theses and Dissertations (Chula ETD)
In this research, the 25Cr-3Ni-7Mn-0.66N new duplex stainless steel (DSS) was fabricated by the vacuum arc re-melting (VAR) process, then deformed by hot-forging process, and subsequently heat-treated at 1250°C for 1 hr + water quenched + 1050°C for 1.5 hr + water quenched., based on the calculation of the phase diagram by Thermo-Calc software. The material characterisations and chemical compositions were examined by various methods. The corrosion behaviours of the new duplex in artificial seawater (ASW) after ASTM D1141 and in artificial seawater mixing with thiosulfate was studied at 25°C and compared with that of the 2205 standard DSS by …
Very High Cycle Fatigue Behavior Of Laser Beam-Powder Bed Fused Inconel 718 Considering The Layer Orientation And Surface Finish Effects, Palmer Frye
UNF Graduate Theses and Dissertations
Additive Manufacturing (AM) techniques have recently gained popularity for fabrication of parts used in aerospace applications. Some of these parts may be subjected to cyclic loading at very high frequencies, leading to service life requirements exceeding ten-million cycles (>107 cycles). Therefore, understanding the very high-cycle fatigue (VHCF) behavior of these AM parts is an important step in their design and qualification processes. In this thesis, both high-cycle fatigue (HCF) and VHCF behaviors of Inconel 718, a Ni-base superalloy, manufactured via a Laser Beam-Powder Bed Fusion (LB-PBF) process, are investigated. Uniaxial, fully reversed force-controlled fatigue tests were conducted utilizing …