Metallurgy Commons^™

Electrogalvanizing And Drawing Of Steel Wires, Thomas Joseph O'Keefe Jr.

Masters Theses

"The effects of varying current density, temperature, Zn⁺² and licorice concentrations on the morphology of the zinc deposited on steel wire have been studied and compared. The plated wires were then drawn and evaluated in terms of required drawing energy and zinc loss during processing of up to 40% reduction in area. Scanning electron microscope and X-ray diffraction were used to evaluate the electrodeposits"--Abstract, page ii.

The Role Of Boron In So32 And So43 Steels, Sunil S. Moghe

Masters Theses

"In this project study was conducted with the goal of understanding the role of boron involved in structure-toughness property relationship for SO32 and SO43 steels. For a standard heat-treatment of austenitizing (1 hr.) at 1700°F, water quenching and 1 hr. tempering at 1150°F SO32 steel (with 37 ppm B) lacked in toughness, while SO43 steel (with 2 ppm B) showed good toughness. In both steels all the boron was present in the form of "soluble boron" i.e., Fe₂₃ (B,C)₆ borocarbide. Experiments were carried out to study the effect of various heat treatment parameters on the precipitation behavior of …

Solid Solubility Of Sulfur In Transition Metal Oxides And Stability Of Sulfates Relevant To Roasting Processes, Zeynal Karakus

Masters Theses

"Two types of sulfur equilibration experiments were carried out in this study using either a conventional thermal gravimetric analysis (TGA) technique or a horizontal tube furnace apparatus. Samples were equilibrated with flowing SO₂-O₂ gas mixtures of either 58% SO₂ or 10% SO₂.

The types of experiments were:
1. Investigation of the extent of solid solution of sulfur in ZnO, NiO, CuO, and Fe₂O₃ over a wide range of temperature.
2. Studies of compound or solid solution formation between binary sulfate mixtures of Fe-Zn, Cu-Zn, Ni-Zn, Fe-Cr, and Cd-Zn by TGA.

The …

Ion Implantation For Improvement Of Wear Properties Of Steels, Kenneth W. Burris

Masters Theses

"Previous research on ion implantation at U.M.R. has dealt with the development of a modified Falex Lubricant Tester as a valid wear test and its use in dose curve determination. Our recent work uses Auger surface analysis and scanning electron microscopy to gather support for a model that will tie together some of the many theories proposed as to why ion-implantation improves the surface related mechanical properties of steels"--Abstract, page ii.

Dynamics Of Twinning In Natural Α-Quartz, Alexander Aning, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

Finite amplitude internal friction experiments in α-quartz are described and interpreted in terms of the theory of nonlinear anelasticity. The theory predicts a linear relationship between the driving force of the excitation and the period of the auto modulation at its onset. This relation is substantiated by experiments performed with a natural α-quartz reed vibrating in flexure at resonance frequencies between 65 and 170 Hz in the temperature range of 162° and 224°C. The data suggests that Dauphiné twinning in α-quartz causes the auto modulation governed by an activation energy of 92 kJ mole. This activation energy characterizes short distance …

Dynamics Of Stress Induced Hydride Formation In Vanadium, Alex Aning, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Non-Linear Oscillation, Automodulation And Anelasticity, Tetsuro Suzuki, Manfred Wuttig

Physics Faculty Research & Creative Works

The auto modulation observed in the course of internal friction is discussed as a special example of the universal nature of non-linear oscillations. Universal features of non-linear oscillations are the requirement of energy supply or negative damping and the period doubling route to chaos. The negative damping responsible for the auto modulation is described in terms of the soliton model for twinning deformation. © 1984 The Japan Society of Applied Physics.

The Effects Of Certain Impurities And Their Interactions On Zinc Electrowinning, Donald R. Fosnacht, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

The effects of germanium, antimony, arsenic, cobalt, glue, and free acid concentration were studied on both commercial and synthetic electrolytes. The effects of a single factor and the combined effects of multiple factors were elucidated. The temperature, zinc concentration, and current density were varied for some of the tests. It was found that the acid content was the most critical factor when impurity levels were at normal plant solution concentrations. The ranges where the effect of the impurity became apparent were: greater than 20 ppb (parts per billion) for antimony; 40 ppb for germanium; 120 ppb for arsenic; and 7 …

Screening Design Test For Cobalt Cementation From Zinc Electrolyte, Mark S. Blaser, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

The Effect Of Selected Alloying Elements On The Hardness And Microstructure Of Ductile Cast Iron, Chi-Hua Edward Tseng

Masters Theses

The effects of cooling rate and alloying element on the matrix structure, nodule count and hardness have been studied in this investigation.

Recommendations for producing ferritic ductile iron have been made and the relationship between hardness and pearlite percentage has been obtained in this study.

Separation Of Mineral Particles In Cyclones Under The Influence Of A Magnetic Field, Kwasi Amoako-Gyampah

Masters Theses

"The separation of mineral particles in a cyclone under the influence of a magnetic field was investigated using an electromagnetic - cyclone arrangement. Feed pulps of dolomite and magnetite were used in the study. Two different cyclone types were investigated: An air-type cyclone arrangement and a conventional cyclone arrangement. Magnetic field strengths of 0 to 3000 gauss (0 - 0.3 Tesla) were used in the study by varying the current through the coils of the electromagnet .

The parameters evaluated in the study were the grades and recoveries of the magnetic concentrates produced, the enrichment ratios, the improvement in recoveries …

Comments On A Paper By Baik And Raj, Hollis P. Leighly

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Twinning Pseudoelasticity In Intl, Manfred Wuttig, Lin Chun-Hung

Materials Science and Engineering Faculty Research & Creative Works

Twin boundaries generally contribute significantly to the damping of a twinned crystal. In an In-19.1 at.% Tl single crystal the damping gives rise to auto modulation if the internal friction studies are performed in the 10 Hz frequency range, with a strain amplitude larger than 0.05 and at temperatures lower than 10°C. The frequency of the auto modulation is about 60 times slower than the frequency with which the reed type sample is driven. The auto modulation frequency has a maximum at -6 C and is characterized by an activation energy of 29 kJ/mol (7 kcal/mol). This maximum can be …

The Influence Of Additives And Their Interactions On Copper Electrorefining, Chwan-Tsann Wang

Doctoral Dissertations

"Protein colloid (glue), thiourea, Avitone and chloride ion are the most common additives used electrorefining copper. The polarization behavior of these additives, single and combined, was studied by cyclic voltammetry techniques in conjunction with stationary and rotating disc electrodes. In the stationary electrode work, different protein colloids give substantially different results in polarization or interaction with other additives. The role played by Avitone is not clear, but it does somewhat modify other additives in the electrolyte. Thiourea can cause a depolarized peak and a polarized plateau depending on the concentration, the other additives present and the potential selected. Chloride ion …

Nonlinear Anelasticity Of Magnesium, Alexander Aning, Tetsuro Suzuki, Manfred Wuttig

Physics Faculty Research & Creative Works

An approximate solution of the equation of motion of a nonlinear anelastic reed at or near resonance is presented. The steady state solution reproduces the well-known nonlinear resonances. The solution also predicts the existence of auto modulations, i.e., self-excited modulations of the amplitude and phase at constant power of excitation of the reed. Numerical examples of such auto modulations are presented for an antisymmetric deformation potential. Experimental studies of finite amplitude oscillations of a magnesium reed vibrating at 72 and 431 Hz at room temperature confirm the existence of auto modulations. The experimental results can be semi quantitatively described in …

Phaseautomodulation In Magnesium, Alexander Aning, Tetsuro Suzuki, Manfred Wuttig

Physics Faculty Research & Creative Works

No abstract provided.

Drawing Characteristics Of Electrogalvanized Steel Wires., Chi-Yuan Tsao

Masters Theses

"As a means of investigating the often adverse drawing behavior of electrogalvanized steel wire, drawing experiments were conducted on a variety of industrially-supplied and laboratory-prepared electroplated steel wires. Back-flow and shaving appeared to be the mechanisms by which sizeable zinc losses occurred. Performance during drawing and the quality of the product depended upon both the characteristics of the plating and the drawing process variables. Grain size, grain texture, and surface 'flatness' can affect the required drawing force, surface finish and level of zinc retention. Low die angles and large reductions offered greatest efficiencies with minimum zinc loss"--Abstract p. ii

Anomalous Diffusion Of Carbon In A 70/30 Iron-Nickel Alloy, L. R. Chapman, D. A. Powers, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Model For Evaporation Of A Grain‐Boundary Phase, Manfred Wuttig, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

The surface profile which develops in the vicinity of a grain boundary precipitate in the course of evaporation is calculated. It is shown that the presence of the grain boundary precipitate affects the profile significantly if the product of the width of the grain boundary precipitate and the ratio of the evaporation rates of the unperturbed surface and the grain boundary precipitate is larger than one. Copyright © 1981, Wiley Blackwell. All rights reserved

Autooscillations In Zinc, Manfred Wuttig, Alex Aning, Tetsuro Suzuki

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

The Inert Gas Effect On The Rate Of Evaporation Of Zinc And Cadmium, P. C.S. Wu, Thomas J. O'Keefe, Fred Kisslinger

Materials Science and Engineering Faculty Research & Creative Works

An experimental study has been made to investigate the effect of argon and helium on the rate of evaporation of zinc and cadmium under one atmosphere pressure at temperatures ranging from 500 to 850°C. The experimental results were compared with the maximum rates calculated using the effusion formula as well as with values obtained using two different types of equations based on kinetic theory, diffusion theory, and empirical data. Equations have been derived for expressing the rate of evaporation of zinc and cadmium in both argon and helium as functions of temperature of the liquid zinc and cadmium. It was …

Evaluation Of Zinc Sulphate Electrolytes Containing Certain Impurities And Additives By Cyclic Voltammetry, D. R. Fosnacht, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

The polarization characteristics of acid zinc sulphate electrolytes containing various amounts of germanium and cobalt were examined by cyclic voltammetry. The effects of zinc and acid concentration, temperature, and surface preparation were also investigated. Small concentrations of impurities are shown to cause measurable changes in polarization behavior. Levels as low as 0.02 mgl-1 Ge and 0.1 mgl-1 Co can be detected using this technique. The actual mechanism of impurity behavior is more clearly delineated using this technique and evaluation of the data from these tests indicate that germanium and cobalt form local galvanic cells. The results of these short-term tests …

Autooscillations And Nonlinear Anelasticity, Manfred Wuttig, Tetsuro Suzuki

Materials Science and Engineering Faculty Research & Creative Works

In conclusion it can be stated that a novel phenomenon, a mechanical auto oscillation, has been described theoretically and shown to exist experimentally. These auto oscillations occur when a nonlinear anelastic solid is forced into large amplitude oscillations in the vicinity of a martensitic transformation. They manifest themselves as a low frequency auto modulation of the a martensitic transformation. They manifest themselves as low frequency auto modulation of the forced vibration of such a solid. © 1980.

Phase Equilibria For Iron-Rich Fe-Cu-C Alloys: 1500 To 950°C, Krishna Parameswaran, Kenneth Metz, Arthur E. Morris

Materials Science and Engineering Faculty Research & Creative Works

Isothermal sections for the iron rich corner of the Fe-Cu-C system have been constructed at 1500, 1450, 1200, 1172, 1150, 1000, and 950°C. A ternary invariant point exists at 1172°C where an iron rich liquid, a copper rich liquid, austenite, and graphite coexist. The iron rich liquid contains 3.7 wt pct Cu and 4.0 wt pct C. The austenite contains 7.3 pct Cu and 1.6 pct C. The copper rich liquid contains 2.4 pct Fe, and apparently very little carbon. The diagrams are used to explain the phenomena of "inverse segregation" that occurs during the solidification of iron rich Fe-Cu-C …

An Experimental Study Of The Reactions Of Excited Neon Atoms In Pure Afterglow Plasmas Using Resonance Absorption Spectrometry, R. A. Sierra, J. Beverley Clark, A. J. Cunningham

Materials Science and Engineering Faculty Research & Creative Works

Resonance absorption spectrometry has been applied in a room temperature study of the reactions of excited neon atoms in pure afterglow plasmas. The pressure range 10-500 Torr was investigated. Lorentz broadened linewidths calculated using a simple classical interruption theory allowed fractional absorption signals as large as 98% to be analyzed and absolute excited-state concentrations to be determined. The first absorption studies of the decay of 1P1 excited atoms in neon afterglows are reported. Analysis of the decay profiles of the 3P2, 3P0 and 1P1 excited states allowed quenching rate coefficients for each state to be determined and the role of …

A Metallurgical Evaluation Of The Mi Vida Prospect: A Mixed Copper Sulfide-Carbonate Ore Body, Sells, Pima County, Arizona, Kevin Michael Kenney

Masters Theses

"A copper-prospect in south-central Arizona has been evaluated on a metallurgical basis. Primary chalcocite and secondary covellite, plus the copper oxides malachite and brochantite, constitute the economic mineralization. The deposit outcrops as a steeply dipping (70°SW), intensely brecciated, copper-bearing quartz vein with discontinuous lenticular ore shoots.

Acid leaching techniques alone and in conjunction with froth flotation utilizing four copper oxide specific collectors were used to evaluate the amenability of this ore to processing. Direct acid leaching was examined and found to be ineffective. Removal of the chalcocite by froth flotation with xanthate was easy and gave better results to subsequent …

Nonlinear Anelasticity And The Martensitic Transformation, Manfred Wuttig, Tetsuro Suzuki

Materials Science and Engineering Faculty Research & Creative Works

Zener's model of a standard linear solid is extended to include nonlinearities characteristic of metals and alloys in the vicinity of a martensitic transformation. The equation of motion of a nonlinear anelastic solid is derived and solved using van der Pol's method. The characteristics of the solutions indicate that auto-oscillations of finite amplitude can be excited externally. It is proposed that the streaming oscillations represent the beat between the external excitation and the auto-oscillation. © 1979.

Recovery Of Lead From Lead Smelter Mattes, Cheng-Ping Chang

Masters Theses

"A by-product of lead smelting is a matte which consists mostly of lead and copper sulfides. Experiments were conducted to determine the feasibility of removing lead from molten matte by adding iron as a reducing agent. The effectiveness of iron at 1000 and 1100°C was a function of matte composition, but not of temperature except near iron saturation. The lead content of matte could be decreased to as low as 9.0 to 11.6 wt pct (2.3 to 3.0 at. pct) at 1000°C, depending on composition. The effect of oxygen in the matte on lead recovery from iron-saturated mattes was also …

Pelletizing Of A Lead Sinter Machine Feed, Hung-Yang Tsai

Masters Theses

"A typical lead sinter machine feed can be pelletized in a drum pelletizer using tap water as a binding liquid. The green pellets produced have return sinter as cores, and an outer layer of new material and fluxes. The moisture content of the pellets produced is about 5%. The pelletizing procedure developed used raw materials from the Amax Lead Smelter, with only a minor amount of feed preparation. The importance of proper moisture control, use of binders, method of adding moisture, speed of pelletizing drum, etc. were investigated. The stability of pellets under extreme storage conditions was also determined"--page ii.

Molybdenum Stability In Coal Slags At 1400⁰C: Corrosion Properties For Mhd Electrode Applications., Kenton Brian Wright

Masters Theses

"Molten coal slag corrosion studies conducted on molybdenum at 1400°C used static and stirred slag experiments and electrical current experiments to parallel electrode conditions of slagging duct MHD generators. Crucibles containing molybdenum and slag were exposed to combustion-type gases in a tube furnace. Carbon monoxide-carbon dioxide gas mixtures controlled oxygen partial pressures at selected values between 10^-11 and 10^-3 atm. Metallograph and microprobe examination of polished sample sections defined corrosion characteristics.

At 1400°C, molybdenum metal is stable below 10^-9 atm oxygen pressure. Molybdenum dioxide is stable at higher pressure, but volatile molybdenum trioxides prevent formation of stable …