Metallurgy Commons^™

Shape Memory Behavior In Medium To High Entropy Shape Memory Alloys: Design, Prediction, And Experimental Analysis, Hatim Raji

Theses and Dissertations

This dissertation provides a data-driven system integrating synthetic data generation and machine learning (ML) techniques to create multicomponent SMA compositions with specific transformation temperatures (TTs). Models were trained to represent the nonlinear dependencies influencing martensitic transformation behavior by using elemental, thermodynamic, and process-related aspects. The capacity of the ML models on medium entropy NiTiHfPd and high entropy NiTiHfZrCu systems accuracy was confirmed by experimental validation showing TTs closely matched with model outputs.

Material Extrusion 3d Printing Of Metal Alloy: Material, Methods And Application., Sihan Zhang

Electronic Theses and Dissertations

Material extrusion (MEX) additive manufacturing presents a promising pathway for producing metal components with complex geometries while avoiding the safety hazards associated with loose powder handling in conventional metal additive manufacturing processes. This dissertation investigates the development and optimization of MEX processes for aluminum alloys, addressing critical challenges in feedstock formulation, printing parameter optimization, and post-processing strategies. Three distinct approaches were explored to advance the capabilities of aluminum MEX: filament-based processing of 6061 aluminum, paste-based extrusion of 6061 aluminum, and development of a novel aluminum-magnesium-tin alloy system for space manufacturing applications. The filament-based approach successfully demonstrated the production of 6061 …

Exploring Metal Additive Manufacturing In Martian Atmospheric Environments, Zane Mebruer

Mechanical Engineering Undergraduate Honors Theses

On-surface manufacturing is key to the success of a planetary colonization, especially that of Mars. However, traditional subtractive manufacturing processes are equipment, energy, and material intensive, meaning novel additive manufacturing (AM) processes must be pursued for this end. Selective laser melting, one of the most effective and versatile AM methods, would be incredibly beneficial to a Martian mission but requires an artificial argon atmosphere to create effective parts. The purpose of this study was to examine if carbon dioxide, the gas that makes up over 95% of Mars’ surface atmosphere, would be a sufficient substitute for argon in SLM fabrication. …

Developing Reduced Order Models For Gas Bubble Formation In Irradiated Metals Using Integrated Phase Field Modeling And Koopman Operator Theory, John M. Eggemeyer V

All Theses

Irradiation damage in materials is prevalent in nuclear components, posing significant risks in the safety and reliability of nuclear reactors. Phase field models offer a versatile framework for modeling irradiation damage in materials at mesoscales. Such high fidelity method has been used to model the formation of fission gas bubbles superlattice, a microstructure array occurs at certain irradiation conditions (dose, dose-rate, and temperature). To overcome the high computational cost of phase field modeling, Koopman operator theory is applied to create reduced order models, allowing for instantaneous simulations of fission gas bubble behaviors. These low fidelity models are integrated into machine …

Manipulating Martensitic Transformation And Residual Stress Development In Stress Superposed Incremental Forming Of Ss304, Elizabeth M. Mamros, Fabian Maaß, Thomas Gnaupel-Herold, A. Erman Tekkaya, Brad L. Kinsey, Jinjin Ha

Faculty Journal Articles

Stress superposition is one of the strategies used in metal deformation processes to increase the material formability, decrease the required forming forces, and create highly customized components. To investigate the effects of tensile and compressive stresses superposed to the single point incremental forming (SPIF) process, experiments and numerical simulations were conducted for a stainless steel 304 (SS304) truncated square pyramid geometry. Tensile stresses were superposed in-plane on the specimen blank by a custom hydraulic frame, and compressive stresses were incorporated via a polyurethane die. Identified parameters for a martensitic transformation kinetics model for SS304 were used in a two-step finite …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Intelligent Turning Cyber-Physical Systems Modeling Using Sysml, Prithbey Raj Dey, David Lee Enke, Mario F. Buchely

Engineering Management and Systems Engineering Faculty Research & Creative Works

Cyber-Physical Systems (CPS) support industrial automation that incorporates people, hardware, signal, computation, and control using networking to achieve desired results. The complex automated CPS design demands a standard and comprehensive approach to appropriately identify the system requirements, define the architecture, and model the relationships among the software and hardware components. Systems Modeling Language (SysML) provides the capability for a comprehensive modeling to capture the desired design requirements in the systems architecture. SysML enables performance estimation of the model by analyzing constraints while identifying interactions among the components through various behavioral diagrams. In this paper, SysML is applied to the design …

Improvement Of Microcracking And Mechanical Properties Of Tungsten Fabricated Via Laser Powder Bed Fusion Through Alloying With Reactive Secondary Constituents, William S. Mockel

Theses and Dissertations

Tungsten (W), a Group VI transition metal, possesses a number of advantageous properties, most notably its impressive mechanical performance at extreme temperatures. While tungsten's nature render traditional manufacturing methods difficult, additive manufacturing through laser powder bed fusion (LPBF) presents a promising avenue for fabricating tungsten components. However, the material’s high ductile-to-brittle transition temperature combined with the embrittling effect of impurities mean that the residual stresses imparted by LPBF result in microcracking in tungsten, degrading its usefulness. This study sought to improve the characteristics of LPBF-W through the removal of embrittling oxygen content via alloying with low concentrations of reactive elements, …

Effect Of Alloying Additions On Austenite Refinement In Nickel-Alloyed Ductile Cast Irons, Adnan Adib Aahamed

College of Graduate Studies: Theses & Dissertations

The benefits associated with the application of ductile irons are significantly attributed to the control of microstructures, with refinement of austenitic matrix during solidification playing a significant role. Nickel alloyed ductile irons are attractive due to their potential for high ductility and suitability for potential high-temperature applications with stable austenitic microstructure. Refinement of austenite grain structure is thus important to enhance the mechanical properties of the alloyed ductile iron. This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic …

Optimizing Material Selection And Operational Conditions For Xhv Systems: Lessons From Aisi 1020 And 316l Comparative Studies, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

In this study, AISI 1020 low-carbon steel was investigated as a cost-effective alternative to SS316L stainless steel for reaching extreme high vacuum (XHV) conditions. After being baked at 400°C, a vacuum chamber made of low-carbon steel material exhibited an outgassing rate approximately 2000 times smaller than a similar chamber made of stainless steel. Its activation energy for hydrogen diffusion (27 kJ/mol) is less than half that of stainless steel (60.3 kJ/mol), indicating more efficient hydrogen removal during bakeout. MolFlow+ simulations supported the experimental data and demonstrated the importance of system geometry optimization and minimizing stainless steel content for achieving optimal …

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

Controlling Nitrogen Pickup During Induction Melting Of Ultrahigh-Strength Cr-Ni-Mo-V Steels, Kingsley T. Amatanweze, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field

Materials Science and Engineering Faculty Research & Creative Works

Nitrogen pickup during air induction melting can result in porosity and a loss of fracture toughness in ultrahigh-strength quenched and tempered steel castings. Nitrogen atoms are easily adsorbed into liquid steel upon exposure to the air, and argon shrouding alone has limited effectiveness. Previous studies have shown that proper charge sequencing and maintaining a high amount of dissolved oxygen in the melt prior to tapping and deoxidation can limit nitrogen pickup in the melt. In the current study, the effect of melt practice and charging procedure on nitrogen pickup was studied as a function of hold time in a series …

Parametric Analysis Of Water Jet Descaling Efficiency Of Reheated Continuously Cast Thin Slab, Tochukwu P. Ojiako, Mario F. Buchely, Simon Lekakh, Ronald J. O'Malley, Richard Osei, Taha Tayebali

Materials Science and Engineering Faculty Research & Creative Works

Efficient oxide scale removal is critical for maintaining surface quality and process efficiency in steel manufacturing. This study optimizes water jet descaling by evaluating the performance of flat and rotary jet nozzles under varying process parameters. Using a combined approach of experimental analysis and computational fluid dynamics, it investigates the influence of pressure (138–275 bar), lead angle (0°, 15°, 25°), working distance (50–100 mm), and spray angle (15°–25°) on descaling efficiency. Findings indicate that flat jet nozzles achieve superior performance at short working distances due to concentrated impact forces, while rotary jet nozzles sustain efficiency over extended distances through dynamic …

Effect Of Gating Design On Filling And Inclusion Control In An Al-Killed Cr-Mo-Ni Steel, Kingsley T. Amatanweze, Koushik Balasubramanian, Soumava Chakraborty, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field, Krista R. Limmer, Katherine M. Sebeck

Materials Science and Engineering Faculty Research & Creative Works

The effect of gating system design on the inclusion population and size distribution in an aluminum-killed low-alloy advanced high strength steel casting was studied. A mold with four different gating systems: pressurized and non-pressurized with side risers, naturally pressurized with a side riser, and naturally pressurized with a top riser, was designed using computational fluid dynamics and solidification software. The design allowed inclusion populations in castings produced with each gating system to be compared during the same pouring event. Samples taken from different positions just below the top surface of each casting were analyzed using an SEM/EDS system with automated …

Investigation Using Single Point Incremental Forming (Spif) To Fabricate Patient-Specific, Titanium Orbital Floor Implants, Elizabeth M. Mamros, Lauren E. Blaha Md, Christian A. Kauffman Md

Faculty Conference Papers and Presentations

The floor of the human orbit is composed of thin bone that is prone to traumatic fracture. This leads to a loss of support for the eye, which can cause vision changes. Therefore, fractures may need surgical reconstruction using a thin, sheet-like implant. Titanium implants are available off-the-shelf in standard sizes, but fitting to each patient’s unique anatomy requires surgeons to cut, file, and bend these plates. This can be time-consuming and imprecise. To both save time and ensure a perfect fit for the patient, a custom plate can be created prior to surgery. This investigation focuses on single-point incremental …

Evaluating The Effectiveness Of Stay-In-Place Forms To Improve The Tosional Stability Of Box Beam Bridges During Erection, Karl E. Barth, Michael W. Seek, Gregory K. Michaelson, Dimitra Pyrialakou, Brook T. Woldegabriel

Engineering Technology Faculty Publications

Cold-formed tub girders provide an effective steel solution for short-span bridges. The girders are often delivered with an open top with stay-in-place forms installed on site. Walkways may be installed to the side of the girder that can induce significant torsion rotations in the open cross section. Full scale tests on girder specimens have shown that installing one or two panels of stay in place forms at the ends of the girder can significantly reduce the torsion rotation of the girder by providing warping resistance. Cantilever tests on the stay in place forms are performed to investigate the influence of …

Characterization Of The Solid-State Bonding For Simulated Charge And Seam Welds In The Porthole Die Extrusion Process, Randall L. Bowers

Theses and Dissertations--Chemical and Materials Engineering

The isothermal (ISO-T) compression configuration is ideal for utilizing as a material input of flow stress at temperature and strain rate in models of the porthole die extrusion process due to the isothermal nature of the test. Micro-tensile testing was conducted to validate the solid-state welding integrity of the ISO-T samples at various temperatures and strain rates. Results of the mechanical testing were correlated with fractography and microstructural evaluations of the welds to confirm bonding behavior. Both clean interface conditions and oxidation and lubrication layers were evaluated to simulate the difference of seam and charge welds in the process. Results …

Advanced Air Preheater Sealing Systems For Enhanced Efficiency And Reliability In Thermal Power Plants, Pavan Kumar Ravulaparthy

Theses and Dissertations

Global electricity generation still relies heavily on thermal power plants, which consume vast amounts of fuel and emit significant amounts of carbon dioxide. A major but often overlooked source of inefficiency in these plants lies within the rotary regenerative air preheater (RAPH), a critical heat-exchange component where air leakage can exceed 20% in aging units. This leakage increases fuel consumption, parasitic fan power, and CO₂ emissions, while degrading boiler reliability.

This research introduces advanced adaptive sealing systems designed to mitigate these losses by dynamically compensating for rotor eccentricity, thermal distortion, and wear under harsh operating conditions. Brush seals, composed of …

Pulsed Arc Additive Manufacturing Of A Functionally Graded Er2209 Duplex Stainless Steel And Hsla-100 Structure: Morphology, Characterization, And Mechanical Performance, Stevens G. Hill Jr

College of Graduate Studies: Theses & Dissertations

Wire arc additive manufacturing is a process well suited to the efficient production of large structures. Duplex stainless steel exhibits high corrosion resistance and good strength which can be highly beneficial for industrial use. However, its use is limited due to its cost and complexity in controlling microstructure to achieve desired properties. In many cases, it can be highly beneficial to manufacture a component which uses specialty steel grades such as duplex stainless steel only where necessary, and utilizes more affordable, commonly available steels for reinforcement or bulk structural support. A functionally graded material satisfies these requirements by providing a …

Fabrication And Characterization Of Cast Copper Heatsinks For Computer Chip Cooling, John James Recktenwald

Graduate Theses, Dissertations, and Problem Reports (ETD)

Humanity has worked copper for millennia, from primitive tools in prehistory to the wires and cooling solutions facilitating the modern digital age. While high performance fin style heatsinks are commonplace, more complex heatsink geometries in high performance applications are rare due to manufacturing challenges. In this study a casting process was developed to fabricate copper pin fin heatsinks. To assess the performance of heatsinks fabricated using the process three pin fin heatsinks were fabricated, one machined from a commercially manufactured billet, one machined from a cast block, and one cast directly to final shape. Each of the three heatsinks were …

Multiphysics Modeling And Experimental Validation Of High-Strength Steel In Laser Powder Bed Fusion Process, M. Rangapuram, S. Babalola, J. W. Newkirk, L. N. Bartlett, F. W. Liou, K. Chandrashekhara, Stephen R. Cluff

Materials Science and Engineering Faculty Research & Creative Works

Laser powder bed fusion (LPBF) is a subset of the additive manufacturing process in which a laser beam selectively joins the metal powder into a desired part in a sequential layer process. Owing to its complex nature of rapid heating and cooling of the melt pool, there is a need to understand the melt pool behavior and its effects on the final manufactured part. a densely packed powder bed is highly desirable for fabricating a superior part using the LPBF process. in this work, discrete element model was used to generate powder beds with realistic powder properties and various factors …

Atmosphere Effects In Laser Powder Bed Fusion: A Review, Ben Brown, Cody Lough, Davis Wilson, Joseph Newkirk, Frank Liou

Materials Science and Engineering Faculty Research & Creative Works

The use of components fabricated by laser powder bed fusion (LPBF) requires the development of processing parameters that can produce high-quality material. Manipulating the most commonly identified critical build parameters (e.g., laser power, laser scan speed, and layer thickness) on LPBF equipment can generate acceptable parts for established materials and moderately intricate part geometries. The need to fabricate increasingly complex parts from unique materials drives the limited research into LPBF process control using underutilized parameters, such as atmosphere composition and pressure. As presented in this review, manipulating atmosphere composition and pressure in laser beam welding has been shown to expand …

Development Of Robust Steel Alloys For Laser-Directed Energy Deposition Via Analysis Of Mechanical Property Sensitivities †, Jonathan Kelley, Joseph W. Newkirk, Laura N. Bartlett, Sriram Praneeth Isanaka, Todd Sparks, Saeid Alipour, Frank Liou

Materials Science and Engineering Faculty Research & Creative Works

To ensure consistent performance of additively manufactured metal parts, it is advantageous to identify alloys that are robust to process variations. This paper investigates the effect of steel alloy composition on mechanical property robustness in laser-directed energy deposition (L-DED). In situ blending of ultra-high-strength low-alloy steel (UHSLA) and pure iron powders produced 10 compositions containing 10–100 wt.% UHSLA. Samples were deposited using a novel configuration that enabled rapid collection of hardness data. The Vickers hardness sensitivity of each alloy was evaluated with respect to laser power and interlayer delay time. Yield strength (YS) and ultimate tensile strength (UTS) sensitivities of …

Utilization Of Sodium Flame Synthesis For The Formation And Deposition Of Pure Metal Materials For Applications In Additive Manufacturing, Zachariah Wargel

McKelvey School of Engineering Graduate Student Theses & Dissertations

Advanced material classes, such as high temperature alloys, ceramics, and refractory materials have become a key area of focus for expansion in the realm of additive manufacturing. Factors such as high melting points, material homogeneity, and physical properties such as ductility limit the application of popular additive manufacturing methods to these material classes. By utilizing sodium flame synthesis and deposition (SFD) technology, nanoparticle materials can be synthesized via combustion in a laminar co-flow diffusion burner and impacted such that the deposits can be used to manufacture designed components. By using the applicable precursor materials of metal chlorides and elemental sodium …

Analysis Risk Based Inspection Api 581 On Lpg Spherical Tank At Pt. Xyz, Sigit Trahmawan, Eddy Sumarno Siradj, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Liquified petroleum gas (LPG) spherical tanks are pressure vessel equipment for storing fuel gas products. The high pressure along with the fuel gas inside as flammable and combustible substance means that this equipment might result major accident hazard such as explosion, fires and environmental pollution. This study is aimed calculated and mitigate risk on 500 metric ton capacity LPG spherical tank using Risk-based inspection (RBI) analysis method that makes risk as its foundation. This RBI method uses quantitative analysis referring to API 581 to determine the risk of LPG Spherical Tank by determining the probability of failure (PoF) and the …

Modeling Powder Spreadability In Powder-Based Processes Using The Discrete Element Method, Austin T. Sutton, M. Hossein Sehhat, Ming C. Leu, Joseph W. Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Powder-bed fusion (PBF) processes refer to a subset of Additive Manufacturing (AM) techniques where powder is spread on the build-plate before melting (by a laser or electron beam). While PBF processes are attractive due to their ability for realizing complex structures that are either difficult or impossible to create through conventional means, the parts fabricated with these techniques can exhibit defects such as pores, inclusions, and excessive surface roughness. To minimize these defects, much research has been dedicated towards process maturation by optimizing laser or electron beam parameters. However, these developmental efforts typically do not address the recoating process where …

Mechanical Characterization And Evaluation Of Additively Manufactured Titanium 5v-5mo-5al-3cr Alloy, Zachary Casias

Mechanical Engineering ETDs

Ti-5V-5Mo-5Al-3Cr (Ti-5553) is a near beta titanium alloy commonly used in aerospace applications. It is currently being explored for additive manufacturing (AM), but the fatigue behavior of this AM alloy needs to be well-understood for adoption in aerospace applications. The present work examines the tensile and fatigue behavior of LPBF manufactured Ti-5553. The effect of post-print heat treatments, effects of surface roughness, and print defects on the mechanical properties of AM Ti-5553 were also evaluated. Fatigue lives of as-LPBF and BAA material are nearly identical, and both are far below the fatigue lives of conventionally manufactured Ti-5553 of 350 MPa. …

Segregation And Heat Treatment Response Of Cast Quench And Partition Steels, Mujeeb Hussain Shaik

Masters Theses

Quench and partition (Q&P) steels have emerged as promising alternatives to traditional quenching and tempering methods, offering a superior balance of strength and ductility due to their unique microstructure of martensite, and retained austenite. This literature review examines the development and optimization of Q&P steels, focusing on their mechanical properties, heat treatment processes, and applications in various industries. This study explores the application and effectiveness of the Quench and Partition (Q&P) heat treatment process on cast steels and examines segregation phenomena in cast medium Mn steels. Medium Mn steels were employed for various Q&P cycles on cast specimens to investigate …

Synthesis Of Ni-Based Intermetallics By Electrolytic Plasma Processing Of Ti And Ti-Based Alloys, Chuzhong Zhang

Material Science and Engineering Dissertations - Archive

EPP is an innovative surface modification technique that enables the deposition of metal ions from the electrolyte and their integration with substrate atoms to form intermetallic compound surface layers. EPP offers advantages such as high deposition rates, environmental cleanliness, and operational simplicity. In this study, Ni-Ti intermetallic layers were successfully synthesized on a Ti-6Al-4V substrate using EPP. The properties of the resulting Ni-Ti intermetallic layers were characterized using SEM, EDS, XRD, TEM, nanoindentation, and tribology tests.

This work aims to understand the fabrication mechanism and investigate the effects of various processing parameters on the EPP process. Key factors such as …

Damage Initiation Of 15v38 Steel Bar During Square-To-Round Hot Rolling Process, Siva Sai Krishna Dasari, Henry Adekola Haffner, K. Chandrashekhara, Mario F. Buchley, Simon N. Lekakh, Ronald J. O'Malley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hot rolling processes have been extensively used to produce round bars by reducing the cross-sectional area of continuously cast steel. The current trend toward increasing productivity often requires a more aggressive reduction per pass. Establishing safe and optimized hot rolling parameters must be determined to avoid damage while deforming the specific steel composition. Understanding the damage mechanism during the metal forming process is vital for product quality. Herein, a combined experimental and simulation approach is developed to track the evolution potential damage during hot bar rolling. Hot tension tests are conducted on as-cast vanadium micro alloyed 15V38 steel at different …