Open Access. Powered by Scholars. Published by Universities.®

Metallurgy Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 91 - 98 of 98

Full-Text Articles in Metallurgy

Thickness Effects On A Cracked Aluminum Plate With Composite Patch Repair, Joel J. Schubbe Jun 1997

Thickness Effects On A Cracked Aluminum Plate With Composite Patch Repair, Joel J. Schubbe

Theses and Dissertations

Post-repair fatigue crack growth was investigated in 3.175, 4.826, and 6.35 mm thick aluminum panels asymmetrically repaired with boron/epoxy composite patches bonded to the plates with FM73 sheet adhesive. Patches were uniaxial with patch to panel stiffness ratios ranging from 0.46 to 1.3. Experimental fatigue tests were carried out at 120 MPa, R=0.1, and 10 Hz (sinusoidal) to measure patched and unpatched face crack lengths, center crack opening displacements, and selected strains. Crack growth data was acquired using optical, eddy current, and post-test analysis methods. Crack growth rates were calculated using the incremental polynomial method. A three-layer Mindlin plate finite …

Go to article

Investigation Of Tension-Compression Fatigue Behavior Of A Cross-Ply Metal Matrix Composite At Room And Elevated Temperatures, Elizabeth A. Boyum Dec 1993

Investigation Of Tension-Compression Fatigue Behavior Of A Cross-Ply Metal Matrix Composite At Room And Elevated Temperatures, Elizabeth A. Boyum

Theses and Dissertations

This research, the first load-controlled tension-compression fatigue testing to be performed on a MMC, extends the existing knowledge of MMC fatigue damage mechanisms to include the tension compression loading condition. To accomplish this, a (0/90)2, SCS-6/Ti-15-3 laminate was subjected to tension- tension fatigue at room temperature, and tension-compression fatigue at both room temperature and 427°C. Stress and strain data was taken to evaluate the macro-mechanic behavior of the material. Microscopy and fractography were performed to characterize the damage on a micro-mechanic level. On a maximum applied stress basis, the room temperature tension-tension specimens had longer fatigue lives than the room …

Go to article

Investigation Of Compressive Behavior For Metal Matrix Composites With A Circular Hole, Janet L. Gooder Dec 1993

Investigation Of Compressive Behavior For Metal Matrix Composites With A Circular Hole, Janet L. Gooder

Theses and Dissertations

This study investigated the notched and unnotched macromechanical response due to micromechanical behavior of [0/±45/90]S SCS-6/β 21 S and [0/90] 2S Sigma/β 21S subjected to static compressive loads at room temperature. The stress-strain behavior and mechanical response in the presence of a circular hole was examined. A clear description of the progressive nature of damage, which ultimately resulted in failure, was provided. The effect of elevated temperature was shown for SCS-6/β 21S. The ultimate compressive strength and elastic modulus were reported for both MMCs. Sigma/β 21S and SCS-6/β 21S were mildly notch sensitive at room temperature. Notch sensitivity of …

Go to article

Characterization Of Fatigue Damage In A Metal Matrix Composite (Scs-6/ Ti-15-3) At Elevated Temperature, Brian P. Sanders Nov 1993

Characterization Of Fatigue Damage In A Metal Matrix Composite (Scs-6/ Ti-15-3) At Elevated Temperature, Brian P. Sanders

Theses and Dissertations

The fatigue characteristics of a unidirectional titanium based metal matrix composite (MMC) were investigated at elevated temperature (427°C). A hybrid strain controlled loading mode was used to subject the 0° and 90° laminas to fatigue. Along with the fatigue tests, microscopy and analytical modeling ware also conducted. This combination of activities led to defining the initiation and progression of damage and deformation in the MMC. Hen loading was parallel to the fiber on, the fatigue behavior was initially dominated by creep deformation of the matrix. Then, depending on the maximum strain, specimen failure was the result either fiber fractures or …

Go to article

Investigation Of Fatigue Behavior In Notched Cross-Ply Titanium Metal Matrix Composite At Elevated Temperature, Robert P. Baker Dec 1992

Investigation Of Fatigue Behavior In Notched Cross-Ply Titanium Metal Matrix Composite At Elevated Temperature, Robert P. Baker

Theses and Dissertations

The objective of this research was to investigate the initiation and progression of damage which develops in notched (0/90)2S SCS-6/Ti-15-3 at elevated temperature. Testing consisted of a monotonic tensile test at 427°C followed by fatigue testing performed under load control with a stress ratio of 0.1 at a frequency of 10 Hz. A crack was defined to have initiated when it had attained a length greater than or equal to 0.124 mm. Crack initiation and progression was monitored by strain and modulus observations and visual inspection via telemicroscope. The cracks were recorded with edge and face replicas. Metallographic and …

Go to article

Open And Filled Hole Static Tensile Strength Characterization Of Metal Matrix Composite Scs-9/Β21s, Jacob T. Roush Dec 1992

Open And Filled Hole Static Tensile Strength Characterization Of Metal Matrix Composite Scs-9/Β21s, Jacob T. Roush

Theses and Dissertations

SCS-9/β21s has a reduced gauge thickness, in comparison with other metal matrix composites, due to a smaller diameter fiber. This reduced gauge thickness makes it an attractive candidate for the skin of hypersonic vehicles. Tensile testing of (0/90)2s and (O/±45/90)s laminates was performed at room temperature, 482°C, and 650°C. Both notched and unnotched specimens were tested. Notched specimens, open and filled hole, had a width-to-diameter ratio of six. Materials 7075-T6 and Mar-m-246 were used as pins in the filled hole tensile testing. Analytical work was completed to predict material properties, elastic and plastic stress concentration factors, residual stresses, …

Go to article

Crack Growth Rate Modeling Of A Titanium-Aluminide Alloy Under Thermal-Mechanical Cycling, John J. Pernot Dec 1991

Crack Growth Rate Modeling Of A Titanium-Aluminide Alloy Under Thermal-Mechanical Cycling, John J. Pernot

Theses and Dissertations

In this study, a model is developed to predict crack growth rates in a titanium-aluminide alloy under thermal-mechanical fatigue (TMF). This TMF crack growth rate prediction model, which requires only isothermal data to define its parameters, is distinguished from earlier models in two ways. First, it accounts for mechanical-fatigue and environmental crack growth rate contributions while it also considers a retardation mechanism thought to be caused by creep blunting of the crack tip. This is the first study to account for such a retardation mechanism during TMF. The second uniqueness of the model is that its general form can account …

Go to article

Investigation Of Damage Mechanisms In A Cross-Ply Metal Matrix Composite Under Thermo-Mechanical Loading, Joel J. Schubbe Dec 1990

Investigation Of Damage Mechanisms In A Cross-Ply Metal Matrix Composite Under Thermo-Mechanical Loading, Joel J. Schubbe

Theses and Dissertations

Metal matrix composites (MMCs) are rapidly becoming strong candidates for high temperature and high stiffness structural applications such as the Advanced Tactical Fighter (ATF). This study systematically investigated the failure modes and associated damage in a cross-ply, [0/90]2s SCS6/Ti-15-3 metal matrix composite under in-phase and out-of-phase thermomechanic fatigue. Initiation and progression of fatigue damage were recorded and correlated to changes in Young's Modulus of the composite material. Experimental results show an internal stabilization of reaction zone size but degradation and separation from constituent materials under extended cyclic thermal loading. Critical to damage were transverse cracks initiating in the 90° …

Go to article

First Prev