Biology and Biomimetic Materials Commons^™

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Moisture Effects On Visible Near-Infrared And Mid-Infrared Soil Spectra And Strategies To Mitigate The Impact For Predictive Modeling, Francis Hettige Chamika Anuradha Silva

Theses and Dissertations

Instrumental disparities and soil moisture are two of the key limitations in implementing spectroscopic techniques in the field. This study sought to address these challenges through two objectives. The first objective was to assess Visible-near infrared (VisNIR) and mid-infrared (MIR) spectroscopic approaches and explore the feasibility of transferring calibration models between laboratory and portable spectrometers. The second objective addressed the challenge of soil moisture and its impact on spectra. The portable spectrometers demonstrated comparable performance to their laboratory-based counterparts in both regions. Spiking with extra-weight, was the most effective calibration transfer method eliminating disparities between instruments. The samples were rewetted …

3d Printed Microdialysis-Based Microsampling Probes, Patrick Pysz

Graduate Theses and Dissertations

This work will show the development of a fully 3D printed device platform in which a complex microsampling probe geometry is fabricated in a simple two-step process. This process includes the combination of 2-photon polymerization (2PP) and masked-stereolithography (MSLA). The cutting edge neurotechnology needed to monitor brain internal communication and will require multiple sensing modalities including temperature, pressure, electrophysiological, and optogenetics. Microsampling is an integrally important function for any future biosensing device platform as it allows for chemical delivery and unparalleled specificity through offline analysis of collection samples. Stereolithography (SLA) 3D printing has emerged as a powerful fabrication method capable …

Additive Manufacturing For Medical Education, Michael Noon

College of Engineering Summer Undergraduate Research Program

A growing body of evidence is suggesting that anatomical knowledge, the keystone of many medical specialties, is suffering among new graduates. While a host of reasons are provided, one common thread that many point to is the decline of cadaver dissections in the classroom. Many virtual audio-visual tools are used to address this gap, yet evidence has shown their ineffectiveness. Given this gap, the high degree of flexibility found in additive manufacturing (AM), and the many uses AM has already found in the medical field, we propose its use to fill this gap, allowing for students to learn with touch …

L(D)-Tyrosine-Mediated One-Step Chiral Graphene Production For Chirality-Dependent Sensing, Fnu Pranav, Ali Ashraf, Meena Jaggi, Subhash C. Chauhan, Murali M. Yallapu

Research Symposium

Background: Chirality has been the most iconic phenomenon that occurred in nature. The idea of mirror-image asymmetry associated with the biological entity is still unsolved The emergence of 2D layered nanomaterials which have already shown amazing properties and a wide range of applications, especially in the areas of sensing.Amino acids enantiomers have similar physical and chemical properties however their physiological responses get changed based on the enantiomers. For example, L from amino acids helps body in protein formation, and generation of biological signals etc. whereas the D-form may cause toxic effects. We have developed a novel and facile synthesis method …

The Role Of Leading-Edge Serrations In Controlling The Flow Over Owls’ Wing, Tanner Saussaman, Asif Nafi, David Charland, Hadar Ben-Gida, Roi Gurka

Physics and Engineering Science

We studied the effects of leading-edge serrations on the flow dynamics developed over an owl wing model. Owls are predatory birds. Most owl species are nocturnal, with some active during the day. The nocturnal ones feature stealth capabilities that are partially attributed to their wing microfeatures. One of these microfeatures is small rigid combs (i.e. serrations) aligned at an angle with respect to the incoming flow located at the wings' leading-edge region of the primaries. These serrations are essentially passive flow control devices that enhance some of the owls' flight characteristics, such as aeroacoustics and, potentially, aerodynamics. We performed a …

Design, Synthesis, And Characterization Of Peptide Amphiphile Biomaterials, Huihua Xing

Theses & Dissertations

Self-assembled peptide amphiphiles (PAs) have gained significant attention in recent years due to their ability to form various supramolecular nanostructures with unique physical and chemical properties. These amphiphilic molecules consist of a hydrophobic tail and a peptide domain, allowing for the formation of nanoscale assemblies in aqueous environments. The PA supramolecular structures have a wide range of potential applications, including drug delivery, tissue engineering, and regenerative medicine.

By manipulating the driving forces (e.g., hydrophobic interactions, hydrogen bonds, and electrostatic interactions) involved in the self-assembly, researchers can tune the self- assembly properties (size, shape, stability, and surface character) and, consequently, the …

Soil Respiration Measurements Reveal High Retention Of Organic Carbon From Corn Residue Derived High-Lignin Fermentation Byproduct Enabling Sustainable Lignocellulosic Biofuel Production, Michelle Sun Wang

Dartmouth College Master’s Theses

While 2G biofuel production can utilize non-edible, lignocellulosic feedstocks such as agricultural residues to produce liquid fuel, harvesting crop residues is unsustainable without careful management of the soil underneath. By harvesting a fraction of the crop residues left in the field after harvest, soil health can diminish and critically, the soil organic carbon (SOC) stored in agricultural fields can decrease. Currently, in the most popular 2G process models published, the issue of soil degradation remains unresolved with residue harvest strategies receiving considerable attention in the literature and other SOC management strategies receiving far less. Specifically, the strategy of returning the …

Engineered Material Systems For Mimicking Tissue And Disease, Margrethe Ruding

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis comprises two studies involving design and application of soft material systems. The goal of the first study was to design, fabricate, and characterize hydrogel lattice structures with consistent, controllable, anisotropic mechanical properties. Lattices, based on four types of unit cells (cubic, diamond, vintile, and Weaire-Phelan), were printed using stereolithography (SLA) of polyethylene glycol diacrylate (PEGDA). In order to create structural anisotropy in the lattices, unit cell design files were scaled in one direction by a factor of two in each layer and then printed. The mechanical properties of the scaled lattices were measured in shear and compression and …

Entre Punzones Y Percutores Reconstrucción De Tecnología Ósea De Los Selk'nam (Tierra Del Fuego), Rachel Dietz

Independent Study Project (ISP) Collection

Esta investigación se enfoca en el estudio, reconstrucción y uso de la tecnología ósea empleada por las sociedades cazadoras-recolectoras-pedestres que ocuparon el litoral Atlántico de Tierra del Fuego, durante el Holoceno, específicamente se enfoca en la tecnología utilizada por los Selk´nam del Norte de Tierra del Fuego. La tecnología ósea fue una parte importante de su cultura y dos tipos fueron elegidos para investigar: percutores blandos y punzones huecos. Los percutores blandos fueron confeccionados sobre huesos de guanaco, un recurso importante para las sociedades cazadoras-recolectoras.

Los percutores blandos fueron usados para la formatización de artefactos líticos a través de la …

Non-Equilibrium Colloidal Phenomena In Magnetic Fields And Photoillumination: From Controlling Living Microbots To Understanding Microplastics, Ahmed Al Harraq

LSU Doctoral Dissertations

Colloids are a ubiquitous class of materials composed of microscopic particles suspended in a continuous phase which are found in everyday products and in nature. Colloids are also useful models for studying the spontaneous arrangement of matter from individual building blocks to mesophases. Standard treatment of colloid science is based on the assumption of equilibrium conditions, as defined in traditional thermodynamics. However, novel assembly mechanisms and motility are unlocked by pushing colloids away from equilibrium using external energy. In addition, many colloids in nature and in industrial applications exchange energy and mass with the surrounding environment thus behaving in a …

Electroanalytical Investigations Of Microrna-Conjugated Cerium Oxide Based Nanomaterials For Biomedical Applications, Chaimae El Ghzaoui

Electronic Theses and Dissertations, 2020-2023

Diabetes patients are increasingly suffering from wound-healing impairments coupled with other severe medical conditions. High levels of oxidative stress and proinflammatory cytokines are predominant pathologic characteristics of diabetic wounds. Applying microRNA (miRNA) in gene therapy often successfully treats various disorders by generating highly specific bio-responses. Studies revealed that microRNA146a (miR146a), a regulator of inflammation, is downregulated in diabetic wounds. However, miR203 is found to be highly-expressed in diabetic foot ulcers in positive correlation with disease severity. We have synthesized Cerium oxide nanoparticles (CNPs) since they are used in various biomedical applications due to their high enzyme-mimetic activities and reactive oxygen …

Silver Doped Nanoceria (Agcnp) Integrated Silk Scaffold For Chronic Wound Healing, Architha K. Venkatesan

Honors Undergraduate Theses

Chronic wound healing can be seriously impeded by the formation of biofilms, infections, peri-wound edema, hematoma, osteomyelitis, and the formation of reactive oxidative species (ROS). We hypothesize that a scaffold created from Silver-Doped Nanoceria (AgCNP) embedding silk can be beneficial to aid the wound healing process, inhibit inflammation and prevent microorganisms from forming a biofilm over the wound. Current wound healing methods such as intradermal injections are not advantageous to use since they can cause unwanted responses elsewhere in the body other than the wound site. Silk, however, has a positive impact on the wound healing effect and can be …

Synthesis, Characterization, And Application Of Chitosan Nanoparticles For In Vitro Studies On Hela Cancer Cells, Rejeena Jha

Graduate Theses/Dissertations

Chitosan is a fibrous substance that is derived from chitin, a natural substance in the shells of crustaceans. It possesses all the necessary qualities for being used as carrier for the transport of drugs and genes into tumor, such as biodegradability, biocompatibility, hydrophilicity, and non-toxicity and cationic in nature. Ionic gelation method was used to synthesize chitosan (CS) nanoparticles (NPs). Ionic gelation is a very benign process chemically that requires mixing a CS aqueous solution with a sodium tripolyphosphate (TPP) aqueous solution at room temperature. In addition, a surfactant polyethylene oxide (PEO) alone and a diblock copolymer of PEO and …

Beeswax Wraps As An Alternative To Single-Use Plastics, Sarah Skiver

Williams Honors College, Honors Research Projects

The project goal was to compare the food storage efficacy of sustainable beeswax wraps verses the single-use plastic methods of resealable plastic sandwich bags and plastic cling wrap. The goal was also to test the reusability of the beeswax wraps, as it is a key advantage of beeswax wraps that is advertised. The project purpose was to explore sustainable and eco-friendly alternatives to single use plastics, which are harmful to the environment in both their production and their disposal. Food spoilage was compared in beeswax wrap, plastic sandwich bags, and plastic cling wrap, and spoilage was also observed in a …

Development Of Corn Kernel-Based Biocomposite Films For Food Packaging Applications, Swastika Bera

Electronic Theses and Dissertations

Most of the current and active food packaging resources and methods are nonbiodegradable and nonrenewable therefore harmful to the environment. Due to this, alternate sources of food packaging materials are in high demand. In this study, a bio-composite film has been developed, with Corn kernel powder as fiber reinforcement which is mixed with gelatin, and lignin two biopolymers as the matrix. The effect of Corn Kernel (CK) reinforcement on the Gelatin/Lignin (G/L) matrix on mechanical and barrier properties has been studied. CK has shown great potential as reinforcement to natural polymer, gelatin, and lignin (G/L) for food packaging applications as …

Wetting Transition Of Texturized Surfaces, Jenna Stephens

Williams Honors College, Honors Research Projects

Building on previous research, this project aims to continue the investigation of the wettability of various liquids on a uniform, texturized surface. Different surface energies can impact the wettability of a surface. The surface can be hydrophilic, hydrophobic, or in between. The goal of this project is to research how features of texturized surfaces affect the wetting transition of water, oil, and a mixture of both. Additionally, this project aims to improve the quality of the 3D printed surfaces. The surfaces that will be studied are constructed using UV cured resin 3D printing and are made up of an array …