Materials Science and Engineering Commons^™

Electrospun Polycaprolactone Nanofiber Scaffolds For Tissue Engineering, Andreas Haukas

Graduate Theses and Dissertations

Stem cell and tissue engineering offer us with a unique opportunity to research and develop new therapies for treating various diseases that are otherwise incurable using traditional medicines. However, development of these new therapies replies upon the establishment of in vitro cell culture and differentiation systems that mimic in vivo microenvironments required for cell-cell and cell-ECM interaction. The development of these cell culture systems depends upon the identification of appropriate biomaterials and cell sources. Biomaterials should be carefully selected and fabricated into scaffolds for supporting cell growth and differentiation. In this study, we explored the fabrication of 3D electrospun nanofiber …

Modeling Of Metal-Ferroelectric-Insulator-Semiconductor Structures Based On Langmuir–Blodgett Copolymer Films, Timothy J. Reece, Stephen Ducharme

Stephen Ducharme Publications

Among the ferroelectric thin films used in field-effect transistor devices; the ferroelectric copolymer of polyvinylidene fluoride PVDF –CH2–CF2–, with trifluoroethylene TrFE –CHF–CF2–, has distinct advantages, including low dielectric constant, low processing temperature, low cost, and compatibility with organic semiconductors. The operation of a metal-ferroelectric insulatorsemiconductor structure with PVDF-TrFE as the ferroelectric layer was analyzed and optimized by numerical solution of the Miller and McWhorter model. A model device consisting of 20 nm PVDF/TrFE on a 10-nm-thick high-k dielectric buffer exhibits a memory window of 5 V with an operating voltage of 15 V. The operating voltage can be reduced to …

Nanoscale Domain Patterns In Ultrathin Polymer Ferroelectric Films, Pankaj Sharma, Timothy J. Reece, Daniel W. Wu, Vladimir M. Fridkin, Stephen Ducharme, Alexei Gruverman

Stephen Ducharme Publications

High-resolution studies of domain configurations in Langmuir–Blodgett films of ferroelectric polymer poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), have been carried out by means of piezoresponse force microscopy (PFM). Changes in film thickness and morphology cause significant variations in polarization patterns. In continuous films and nanomesas with relatively low thickness/grain aspect ratio (<1/10), the relationship between the average domain size and thickness follows the Kittel law. Nanomesas with high aspect ratio (>1/5) exhibit significant deviations from this law, suggesting additional surface-energy-related mechanisms affecting the domain patterns. Polarization reversal within a single crystallite has been demonstrated and local switching parameters (coercive voltage and remnant piezoresponse) have been measured by monitoring the local hysteresis loops. Reliable control of polarization at the sub-grain level demonstrates …

Dielectric Nanocomposites: An Inside-Out Approach To Storing Electrostatic Energy, Stephen Ducharme

Stephen Ducharme Publications

The ability to achieve high-energy densities is the central challenge in energy storage and recovery. A promising strategy for increasing energy storage is to use highperformance dielectric materials, such as highly polarizable nanoparticles or polymers, or nanocomposites of the two. In this issue, Kim et al. use a molecular coating and clever chemistry to combine oxide nanoparticles with a polymer matrix, thereby producing an improved nanocomposite dielectric. Some advantages and challenges of using nanocomposites as improved dielectric materials are presented in this Perspective.

Polarization Switching Kinetics Of Ferroelectric Nanomesas Of Vinylidene Fluoride-Trifluoroethylene Copolymer, R. V. Gaynutdinov, O. A. Lysova, S. G. Yudin, A. L. Tolstikhina, A. L. Kholkin, V. M. Fridkin, Stephen Ducharme

Stephen Ducharme Publications

The polarization switching kinetics of ferroelectric polymer nanomesas was investigated using piezoresponse force microscopy. The nanomesas were made by self-organization from Langmuir–Blodgett films of a 70% vinylidene fluoride and 30% trifluoroethylene copolymer. The polarization switching time exhibits an exponential dependence on reciprocal voltage that is consistent with nucleation-type switching dynamics.

Polymer Composite And Nanocomposite Dielectric Materials For Pulse Power Energy Storage, P. Barber, S. Balasubramanian, Y. Anguchamy, S. Gong, A. Wibowo, H. Gao, Harry J. Ploehn, Hans-Conrad Zur Loye

Faculty Publications

This review summarizes the current state of polymer composites used as dielectric materials for energy storage. The particular focus is on materials: polymers serving as the matrix, inorganic fillers used to increase the effective dielectric constant, and various recent investigations of functionalization of metal oxide fillers to improve compatibility with polymers. We review the recent literature focused on the dielectric characterization of composites, specifically the measurement of dielectric permittivity and breakdown field strength. Special attention is given to the analysis of the energy density of polymer composite materials and how the functionalization of the inorganic filler affects the energy density …

Synthesis And Characterization Of Macromolecular Layers Grafted To Polymer Surfaces, Oleksandr Burtovyy

All Dissertations

The composition and behavior of surfaces and interfaces play a pivotal role in dictating the overall efficiency of the majority of polymeric materials and devices. Surface properties of the materials can be altered using surface modification techniques. It is necessary to highlight that successful methods of surface modification should affect only the upper layer of the polymer material without changing bulk properties. The processes must introduce new functionalities to the surface, optimize surface roughness, lubrication, hydrophobicity, hydrophilicity, adhesion, conductivity, and/or biocompatibility.
Research presented in this dissertation is dedicated to the synthesis, characterization, and application of thin macromolecular layers anchored to …

Ionic Liquids As Additives For Biodegradable Polyactic Acid, Ku-Il Park

Dissertations

In this study, two ionic liquids (IL) with different anions (decanoate, tetrafluoroborate) but with the same phosphonium based cation were evaluated as potential plasticizers and lubricants for polylactic acid (PLA) and also for their effects on its hydrolytic and thermal degradation. Both ILs at 5wt% were well dispersible and partly miscible with PLA as evidenced by scanning electron microscopy/energy dispersive x-ray scattering, SEMIEDX, and glass transition temperature, T_g, characterization, as well as from solubility parameters calculations.

The effects of the IL containing a decanoate anion were more pronounced on lubrication and degradation as evidenced by reduced melt viscosities …

Production Of Bulk Ceramic Shapes From Polymer Derived Ceramics, Arnold Hill

Electronic Theses and Dissertations

A method has been developed to produce bulk ceramic components from a class of ceramics known as polymer derived ceramics. In the past polymer derived ceramics have been limited to thin film applications or in the fabrication of MEMS devices. The reason being that when the polymer is into a ceramic, large quantities of gas are generated which produce internal pressure that fractures the ceramic components. The method developed here solves that issue by casting into the polymer a 3 dimensional network of polymer fibers in the form of a foam which, during pyrolysis, burns out and leaves a network …

Polymer-Derived Ceramics: Electronic Properties And Application, Weixing Xu

Electronic Theses and Dissertations

In this work, we studied the electronic behavior of polymer-derived ceramics (PDCs) and applied them for the synthesis of carbon nanotube reinforced ceramic nanocomposites and ceramic MEMS (Micro-Electro-Mechanical Systems) structures. Polymer-derived SiCN ceramics were synthesized by pyrolysis of a liquid polyureasilazane with dicumyl peroxide as thermal initiator. The structural evolution during pyrolysis and post-annealing was studied using FTIR, solid state NMR and Raman. The results revealed that the resultant ceramics consisted of SiCxNx-4 as major building units. These units were connected with each other through C-C/C=C bonds or by shearing N/C. The amount of sp2 free carbon strongly depends on …

Investigation Of Ferroelectricity In Newly Synthesized Nitrile Polymer Systems, Matt Poulsen, Stephen Ducharme, Alexander V. Sorokin, Sahadeva Reddy, James M. Takacs, Y. Wen, Jihee Kim, Shireen Adenwalla

Stephen Ducharme Publications

The ferroelectric and piezoelectric properties of newly synthesized polymer systems have been studied. To date PVDF and its copolymers P(VDF-TrFE) have provided the bulk of the knowledge pertaining to ferroelectricity in polymers. Recently, ultrathin ferroelectric films of P(VDF-TrFE) 70:30 have been fabricated using the Langmuir-Blodgett technique [4]. In this study, various new polymers have been synthesized by chemically altering the PVDF structure. This alteration was performed in order to enhance the amphiphilic nature of the polymer and thus improve the LB film quality and control. Various chemical groups have been used to replace the electropositive hydrogen and electronegative fluorine found …

Mapping Surface Polarization In Thin Films Of The Ferroelectric Polymer P(Vdf-Trfe)., Bradley W. Peterson, Stephen Ducharme, Vladimir M. Fridkin, Timothy J. Reece

Stephen Ducharme Publications

Pyroelectric Scanning Microscopy (PSM) has been developed to enable mapping of surface polarization in ferroelectric thin films, in particular the copolymer polyvinylidene fluoride trifluororethylene, or P(VDF-TrFE). The Chynoweth method for dynamically measuring pyroelectric current is employed in conjunction with a micropositioning system to construct two-dimensional images of the film polarization. These images have revealed enhancement of the polarization near the edges of the film below the average coercive field, with the center's polarization increasing thereafter to meet the edge value at saturation.

Electron Irradiation Effects On Ferroelectric Copolymer Langmuir-Blodgett Films, Christina M. Othon, Stephen Ducharme

Stephen Ducharme Publications

The effect of irradiation on the ferroelectric properties of Langmuir-Blodgett films of the copolymer poly(vinylidene fluoride-trifluorethelene) is investigating using 1.26 MeV electrons with dosages from 16 to 110 Mrad. Irradiation causes a systematic decrease in the phase transition temperature, coercive field and polarization of these thin films.

Comment On: 'Depolarization Corrections To The Coercive Field In Thin-Film Ferroelectrics', Stephen Ducharme, Vladimir Fridkin

Stephen Ducharme Publications

The Letter by Dawber et al. [J. Phys.: Condens. Matter 15 L393 (2003)] notes that incomplete screening in the electrodes of a ferroelectric capacitor can result in an underestimate for the true coercive field in films of nanometer thickness. We show that their estimate of the magnitude of this correction it too large in the case of ferroelectric copolymer Langmuir- Blodgett films and, as a result, invalidates the claim that finite-size scaling of the ferroelectric coercive field is evident in films thinner than 15 nm.

Method Of Preparing A Composite Polymer And Silica-Based Membrane, Dibakar Bhattacharyya, Stephen M. Ritchie, Leonidas G. Bachas, Jamie A. Hestekin, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A method for preparing a chemically activated or polyamino acid functionalized membrane includes the steps of permeating a silica-based membrane with a solution of silane and a solvent so as to react methoxy groups of the silane with silanol groups of the membrane to incorporate epoxide groups and attaching a polyamino acid to the membrane by reacting a terminal amine group of the polyamino acid with one of the epoxide groups on the membrane.

Preparing And Regenerating A Composite Polymer And Silica-Based Membrane, Dibakar Bhattacharyya, Stephen M. Ritchie, Leonidas G. Bachas, Jamie A. Hestekin, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A method for preparing and regenerating a chemically activated or polyamino acid functionalized membrane includes the steps of permeating the silica-based membrane with a solution of silane and a solvent so as to react methoxy groups of the silane with silanol groups of the membrane to incorporate epoxide groups and attaching a polyamino acid to the membrane by reacting a terminal amine group of the polyamino acid with one of the epoxide groups on the membrane. The membrane is regenerated after metal entrapment by utilizing helix-coil properties of polyamino acids.

The Study Of Poly [N-(3-Ferrocene Acetamino Propyl- Pyrrole] Film Modified Glucose Electrode, Cheng-Yun Tian, Jing Chen, Li Zhang

Journal of Electrochemistry

A poly [N-(3-ferrocene-acetamino-propyl-pyrrole)] film modified electrode was fabricated and studied by cyclic voltammetric method. The result shows that the modified electrode can give stable redox peaks of ferrocene, and an obvious catalytic peak due to glucose. This modified electrode was used to tabricate a glucose sensor which operates at +0.2 V, so that the ascorbic acid or uric acid doesn't affect the accuracy detection of glucose concentration. The sensor has a linear range of 0.1～10 mmol/L glucose, which the period of long term stability and response time of the sensor are about ten days and 2 min.

Study On The Preparation, Properties And Applications Of The Polymer/Graphite Composite Electrode, Guohua Chen, Jinrui Xu

Journal of Electrochemistry

The graphite AS composite electrodes, which show high electric conductivity, high mechanical strength and operationl stability, were prepared by filling and extruding the AS copolymer with graphite powder. It exhibited a substantial hydrogen overvoltage and small residual current in different electrolytes, as compared with glassy carbon electrode. The electrode was applied to the determination of traces of Pb²⁺ in mineral water, Ag⁺ in waste water and In³⁺, Cu²⁺, Pb²⁺, Cd²⁺ in zinc ore, and showed high stability, reproducibility and selectivity. Owing to the existence of abundant polar functioal groups on the …

The Electrochemical Behavior Of C60-Chemically Modified Poly(N-Vinylcarhzole)In 1 Mol/L Liclo4-Thf Solutions, Yu Chen, Zuen Huang, Ruifang Cai, Fupin Zhang

Journal of Electrochemistry

The electrochemical behavior of C₆₀-PNVC copolymer in 1 mol/L LiClO₄-THF solutions has been studied by cyclic voltammetry. The results demonstrated that there are considerable differences of electronic structure between PNVC (Poly (N-vinylcarbazole)) and C₆₀-PNVC copolymer, this being consistent with the ESR results and the oxidstion-reduction activarion of pure PNVC by C₆₀-chemical modification. In the potential region, 1.3V～-3.5V, five steps, 0. 90V/0.60V, 0.20V/0.00V, -1.05V/-1.30 V, -1.25V/-1.75 V, -2.00V/-2.50V, of oxidation/reduction proceases were indicated in the cyclic voltammetry for pure PNVC, whereas seven steps, 0.20V/0.20V, -0.30V/-0.50 V, -0. 60V/-0.60 V, -0.80V/-1.10 V, -1.95V/-2.10 V, …