Materials Science and Engineering Commons^™

The Electrodeposition Of Copper-Cobalt Alloys, Richard L. Dunn

Bachelors Theses and Reports, 1928 - 1970

An attempt was made to deposit a 50:50 copper-cobalt alloy from various sulfate electrolytes. No true 50:50 alloy was obtained but various mixtures of cobalt and copper rich crystals were deposited.

Hardness And Electrical Resistivity Of Copper-Iron Powder Metal Compacts, Fred A. Foyle Jr.

Bachelors Theses and Reports, 1928 - 1970

Although powder metallurgical methods have been used for years to fabricate tungsten and platinum, very little scientific data have been recorded until the beginning of this century. A large percentage of all commercial production at present is based upon past practice rather than upon scientific knowledge.

Age Hardening Of Copper Antimony Alloys, William R. Stern

Bachelors Theses and Reports, 1928 - 1970

A large number of alloys of varying percentages of copper and antimony were prepared. These alloys were treated in various ways which might be expected to produce age hardening. The effect of cold working was studied in the range where the alloys were malleable.

The Electrodeposition Of Iron-Manganese Alloys, Raymond D. Magorien

Bachelors Theses and Reports, 1928 - 1970

An electrodeposition of an iron-manganese alloy was made from the same conditions determined by previous re­search. Various addition agents were experimented with in an attempt to produce better conditions for electro-deposition. It was found advantageous to add small a­mounts of sodium lauryl sulfate and ammonium sulfite to the electrolyte.

Flotation Of A Complex Sulphide Ore Containing Tetrahedrite, James C. O'Dea, Lorimer W. Hoar

Bachelors Theses and Reports, 1928 - 1970

The ore investigated in this thesis is a zinc-copper-lead ore. Microscopic analysis of this complex sulphide ore showed it to contain pyrite_, sphalerite, arsenopyrite, galena, chalcopyrite, tetrahedrite, and covellite, with quartz as the gangue constituent.

Bright Electroplating Of Copper In The Acid Bath, Elwood K. Jensen

Bachelors Theses and Reports, 1928 - 1970

Plating of various objects with mirror-like surfaces of chromium, nickel, and other metals has expanded considerably during the past decade, and now ranks as an important enterprise, particularly with respect to the automotive industry.

Electrolytic Deposition Of Iron, Irving M. Kenoffel

Bachelors Theses and Reports, 1928 - 1970

In this thesis the purpose was to obtain a good iron deposit from a relatively simple bath. The deposit was to be of good nature and low in Carbon content. Also included is a summary of the uses to which electrolytic iron can be put as well as a summary of work done by other researchers in depositing iron electrolytically.

Concentration By Flotation Of A Complex Galena - Sphalerite - Chalcopyrite Ore From The Nine Mile District Near Missoula, Montana, Truxton J. Fisher, John L. Tokich

Bachelors Theses and Reports, 1928 - 1970

At the present time ore bodies being mined are becoming more and more complex in mineral association, thus presenting a more difficult problem in their concentration. Lead-zinc sulphide ores are among the more common ores which present such difficulties.

The Electrodeposition Of Iron-Manganese Alloys, Earl C. Roberts

Bachelors Theses and Reports, 1928 - 1970

Various electrolytes were experimented with in an attempt to deposit an iron-manganese alloy. An Alloy was obtained from a solution containing ferrous ammonium sulfate, manganous sulfate, and ammonium sulfate. Further experimentation was done in an effort to determine the optimum conditions of deposition and the highest manganese alloy which could be produced.

Refining Of Low Grade Zinc-Gold Precipitates, John C. Stentz

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation was to ascertain if advantage could be taken of the copper in the precipitates as a collecting agent of the precious metals in the direct smelting furnace.The products produced to be low grade anode bullion and a slag low in precious metals, high in zinc and lead.

An Experimental Investigation Of The Age Hardening Of Nickel With Boron, Willard M. Boam

Bachelors Theses and Reports, 1928 - 1970

Since 1911, at which time, the age hardening phenomenon of duralumin was discovered by Film, much re­search has been carried on investigating the various alloy systems. The successful application of age hardening to the copper aluminum system (duralumin) has indicated the possibility of hardening practically all the metals in the same way.

An Investigation Of The Age-Hardening Of Copper With Nickel-Boron Compounds, Robert I. Moreen

Bachelors Theses and Reports, 1928 - 1970

Boron is an element whose metallurgical possibil­ities have never been fully investigated. The principal reason for this fact seems to lie in the difficulties encountered in preparing elemental boron and its various intermetallic compounds.

Age Hardening Of Copper-Aluminum Alloy Castings, Frank Randall

Bachelors Theses and Reports, 1928 - 1970

Age hardening occurs in alloys of the solid solution type containing a hardening constituent, be it metal or metallic compound, which is more soluble in the solvent phase at higher temperatures than at lower ones.

The Velocity Of Falling Particles In A Liquid Medium, Elliott Coldwater

Bachelors Theses and Reports, 1928 - 1970

The investigation was prompted by the fact that there seemed to be some discrepancy between the results published by Richards,and the empirical figures used in classification and in gravity concentration. Further, the work of Richards was restricted to quartz and galena whereas this study also includes pyrite and calcite.

The Recovery Of Zinc From Butte Mine Waters, Edmond M. Fern

Bachelors Theses and Reports, 1928 - 1970

Very little work has been done towards the recovery of zinc from mine water because the zinc content of the water is generally low. As different from copper, which can very easily be replaced by iron in any of its solutions, zinc is very high up in the electro-chemical series and so the few metals above zinc, most of which are rare and hence expensive, cannot be used to replace zinc from its solution.

Electrical Resistivity Measurements Of Powder Metal Compacts, John M. Fitzpatrick

Bachelors Theses and Reports, 1928 - 1970

This work, as it was originally planned, was the arranging of an apparatus whereby electrical resistivity measurements could be made on powder compacts. It was also to include measurements on a series of copper-nickel compacts both before and after sintering.

Some Investigations On Quantitative Measurement Of Amalgamation, Charles Moore

Bachelors Theses and Reports, 1928 - 1970

Amalgamation is a process in which precious metals are collected by mercury. The exact way in which the mercury holds the other metals is not positively known. It is proba­ble that a series of intermetallic compounds form. Very little work has been done so far on the theory of amalgama­tion.

The Electrowinning Of Manganese From Rhodochrosite, Lloyd L. Thompson

Bachelors Theses and Reports, 1928 - 1970

Manganese is commonly known to be a metal of great strategic importance. It is essential in the production of all steels, first as a scavenger to remove oxygen and sulfur, and second as an alloying element in wear-resis­tant steels.

Some Effects Of The Addition Of Tellurium To Lead Alloys, Selim Ozsahin

Bachelors Theses and Reports, 1928 - 1970

From the standpoint of its practical useful­ness, the most important characteristics of metallic lead are its cheapness, resistance to corrosion, plas­ticity, high specific gravity, low melting point, and its ability to form alloys in which some properties are modified by the addition of other elements, while other properties remain the same.

The Theory Of Alloy Deposition And The Effect Of A Rotating Cathode Upon Such Deposition, With Special Attention To The Possibility Of Depositing Sterling Silver, Kenneth J. Stodden

Bachelors Theses and Reports, 1928 - 1970

In the past few years a great deal of atten­tion has been given to the electrodeposition of alloys. For the main part, this investigation has been of scien­tific interest only; but in a few instances, such work has attained commercial importance.

An Experimental Investigation Of The Age Hardening Of Copper With Manganese Silicide, Ali Kozak

Bachelors Theses and Reports, 1928 - 1970

The subject of the thesis was based upon the theory of precipitation or age hardening of the copper by the compound formed by the Manganese and silicon present in the ternary Cu-Mn-Si alloy. The effect of the heat treat­ment to such an alloy was to be studied and the best aging time and temperature was to be determined.

A Study Of The Concentration Of A Copper-Zinc Ore., Kenneth L. M. Dodd

Bachelors Theses and Reports, 1928 - 1970

The ore under investigation in this thesis is a copper-zinc ore which came from the state of New Mexico. The exact location is unobtainable. The purpose of the investigation was to determine the most effective means of concentration of the valuable min­erals present in the ore.

Electrolysis Of Molten Mixtures Of Galena And Lead Chloride., Donald Q. Cole

Bachelors Theses and Reports, 1928 - 1970

Electrolysis of molten mixtures of lead chloride and galena was carried out under various conditions of temperature, time, composition, and current densities; without a diaphram, and with various diaphrams. Continuous runs, with necessary additions of lead sulfide and lead chloride to maintain a melt of the proper composition, were attempted on a small scale.

The Age Hardening Of Silver With Copper-Silicide, Joseph Edward Shaw

Bachelors Theses and Reports, 1928 - 1970

The successful application of the phenomenon of pre­cipitation hardening to aluminum and copper has indicated the possibility of hardening all metals in the same way. The phenomenon of age hardening was discoveredin 1911, and since that time much research has been car­ried on in all parts of the world on various alloy sys­tems.

A Study Of Solders, John D. Prater

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to furnish a qualitative method of comparing the degree of wetting of various solders upon different plate metals when several fluxes are used.

Powder Metallurgy, Cecil R. Waldron

Bachelors Theses and Reports, 1928 - 1970

The metal powders may be produced in a number of different ways. In metals where the intercrystalline material is brittle enough, they may be ground in a ball mill or eddy mill. The fineness of such a powder is more or less controlled by the grain size of the original metal.

Electrolytic Recovery Of Copper And Zinc From Brass., V. Kent Loughran

Bachelors Theses and Reports, 1928 - 1970

The reclamation of metals from scrap is becoming increasingly important in the metallurgical industry. Copper, because it does not corrode readily and is electronegative to most common metals, is peculiarly adapted to reclamation.

A Rapid Determination Of Small Amounts Of Lead In Zinc, George T. Hanson

Bachelors Theses and Reports, 1928 - 1970

This investigation, carried on in the metallur­gical laboratories at the Montana School of Mines, was undertaken with the desire to work out a rapid method for the estimation, or the determination, of the amount of lead in zinc.

The Electrodeposition Of Manganese From Certain Aqueous Solutions., William C. Wallace

Bachelors Theses and Reports, 1928 - 1970

Manganese has been successfully electrodeposited from aqueous solutions in past years by several work­ers in electrochemical and electrometallurgical fields.

The present work was concerned, primarily, with investigation of electrodeposition from solutions which are commercially obtainable from the hydrometallurgical or pyrometallurgical treatment of the low grade mangan­ese deposits of this country.

The Electroplating Of Cadmium From Sulfate Solutions, Lewis S. Prater

Bachelors Theses and Reports, 1928 - 1970

It has been proven that cadmium forms a very satisfactory plate on steel, which has to withstand severe corrosion, especially the corrosion of sea water and spray. The metal is now successfully plated electrolytically from cyanide solutions, but wherever work is carried on with cyanide, there is great danger of poisoning to the workers.