Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2025

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 811 - 840 of 971

Full-Text Articles in Materials Science and Engineering

Optimization Of Indigo Dyeing On Modal Fabrics Using Thiourea Dioxide As An Environmentally Friendly Reducing Agent, Monthon Nakpathom, Buppha Somboon, Nootsara Narumol, Rattanaphol Mongkholrattanasit, Pisutsaran Chitichotpanya, Nattaya Vuthiganond Jan 2025

Optimization Of Indigo Dyeing On Modal Fabrics Using Thiourea Dioxide As An Environmentally Friendly Reducing Agent, Monthon Nakpathom, Buppha Somboon, Nootsara Narumol, Rattanaphol Mongkholrattanasit, Pisutsaran Chitichotpanya, Nattaya Vuthiganond

Journal of Metals, Materials and Minerals

This investigation examines the potential of thiourea dioxide as an environmentally reducing agent for dyeing of natural indigo on modal fabrics. Although traditional sodium dithionite is effective, its sulfur by-products generate environmental concerns. Thiourea dioxide, which provides a more environmentally friendly alternative, was studied under various dyeing conditions. In this study, six dyeing parameters, including thiourea dioxide and sodium hydroxide concentrations, reduction temperature, reduction duration, dyeing time, and reduction-oxidation cycles, were optimized to enhance color strength. Results indicated that the most favorable reduction conditions were achieved when 80 g/L of thiourea dioxide and 2 g/L of sodium hydroxide were heated …

Go to article

Eco-Friendly Synthesis Of Flower-Like Hierarchical Structure Of Cuo Nps For Advancing Photocatalytic Efficiency And Antibacterial Applications, Yodchai Tangjaideborisut, Shanmugam Shanmugam, Supakorn Boonyuen, Govindasamy Siva, Prema Yugala, Joon Ching Juan, Choowin Phanawansombat, Atchariya Pitintharangkul, Seerangaraj Vasantharaj, Pornpan Pungpo, Pariya Na Nakorn Jan 2025

Eco-Friendly Synthesis Of Flower-Like Hierarchical Structure Of Cuo Nps For Advancing Photocatalytic Efficiency And Antibacterial Applications, Yodchai Tangjaideborisut, Shanmugam Shanmugam, Supakorn Boonyuen, Govindasamy Siva, Prema Yugala, Joon Ching Juan, Choowin Phanawansombat, Atchariya Pitintharangkul, Seerangaraj Vasantharaj, Pornpan Pungpo, Pariya Na Nakorn

Journal of Metals, Materials and Minerals

In recent decades, environmental pollution caused by organic dyes and pathogenic microorganisms has posed significant challenges to both ecological and public health. Therefore, the development of multifunctional materials capable of simultaneously degrading dyes and exhibiting antibacterial properties is crucial for effective environmental remediation. Combining photocatalytic dye degradation with antibacterial activity offers a promising approach to address these dual concerns in a single process. The present study investigates the copper oxide nanparticles (CuNPs) were prepared by green synthetic method using bamboo extract for degradation of methylene blue and in inactivation of biological pathogens. The green synthesized CuONPs were characterized various spectroscopic …

Go to article

Bagasse Lignin For Single-Used Food Packaging Applications: Uv-Barrier, Antioxidant, Migration And Cytotoxicity, Pawarisa Wijaranakul, Bongkot Hararak, Wanwitoo Wanmoolee, Prapudsorn Wannid, Weerawan Laosiripojana Jan 2025

Bagasse Lignin For Single-Used Food Packaging Applications: Uv-Barrier, Antioxidant, Migration And Cytotoxicity, Pawarisa Wijaranakul, Bongkot Hararak, Wanwitoo Wanmoolee, Prapudsorn Wannid, Weerawan Laosiripojana

Journal of Metals, Materials and Minerals

This study examined PLA biocomposite films made from organosolv lignin extracted from Thai agro-waste, specifically sugarcane bagasse (BG), to assess their suitability for food packaging, focusing on their physical, thermal, optical, UV-shielding, antioxidant, and migration properties. Extracted BG-lignin exhibited free radical scavenging ability with an EC50 value of 400 µg/ml, reducing DPPH absorbance by 50%. PLA composite films with BG-lignin dosage from 0.1 to 1.0 wt.% were successfully fabricated via conventional blown film extrusion. Addition of BG-lignin at 0.5 wt.% and 1.0 wt.% to PLA films decreased UV transmittance from 90% to 30% and 12%, respectively, without compromising optical clarity. …

Go to article

Enhancing Efficiency And Productivity Of Microbial Fuel Cells For Optimization Of Wastewater Treatment With Bioenergy Production, Diptimayee Pradhan, Krishna Pada Bauri, Debarpita Ghosal, Satchidananda Mishra, Abhijeet Das, Aditya Raj Singh, Akhil Gedela, Kumbhakarna Mallik, Mohammed Hassan Ali Hbag Jan 2025

Enhancing Efficiency And Productivity Of Microbial Fuel Cells For Optimization Of Wastewater Treatment With Bioenergy Production, Diptimayee Pradhan, Krishna Pada Bauri, Debarpita Ghosal, Satchidananda Mishra, Abhijeet Das, Aditya Raj Singh, Akhil Gedela, Kumbhakarna Mallik, Mohammed Hassan Ali Hbag

Journal of Metals, Materials and Minerals

The primary objective is to remove the pollutants from the wastewater streams and reintegrate them into the water cycle, therefore safeguarding the environment and promoting public health. The utilization of membrane fuel cells (MFCs) enables the conversion of organic molecules present in wastewater into electrical energy, while concurrently generating potable water. To optimize the process, it is essential to understand the parameters that affect the performance and the relevant techniques such as electrode materials, microbial collectives, and operating settings to improve the efficiency and performance of MFC. Thus, it aims to present novel ideas that support the real-world deployment of …

Go to article

A Review On Recent Progress In Supported Magnetic Nanoparticles: From Synthetic Methods To Applications, Khushboo Dhiman, Ayashkanta Nanda, Navneet Kaur, Manvinder Kaur, Harvinder Singh Sohal, Himanshi Sharma, Meenakshi Verma Jan 2025

A Review On Recent Progress In Supported Magnetic Nanoparticles: From Synthetic Methods To Applications, Khushboo Dhiman, Ayashkanta Nanda, Navneet Kaur, Manvinder Kaur, Harvinder Singh Sohal, Himanshi Sharma, Meenakshi Verma

Journal of Metals, Materials and Minerals

Magnetic nanoparticles supported on various materials have recently gained significant attention due to their wide range of applications across multiple fields such as catalysis, biomedicine, environmental remediation, and magnetic separation. The support materials are essential for stabilizing magnetic nano-particles and enhancing their properties, thereby improving their performance and versatility. This review presents a comprehensive summary of recent advancements and key developments in supported magnetic nanoparticles, focusing on various support materials including silica, alumina, cellulose, charcoal, polymeric materials, and carbon nanotubes. We also discussed why we needed a shift from conventional nanoparticles to magnetic nanoparticles and from magnetic nanoparticles to supported …

Go to article

Coating Of Zinc Substrates With Fluorosilane Molecules Using A Water-Treatment Technique As A Pre-Coating Procedure For The Creation Of Superhydrophobic Surfaces, Renz Ronald R. Prieto, Marvin U. Herrera Jan 2025

Coating Of Zinc Substrates With Fluorosilane Molecules Using A Water-Treatment Technique As A Pre-Coating Procedure For The Creation Of Superhydrophobic Surfaces, Renz Ronald R. Prieto, Marvin U. Herrera

Journal of Metals, Materials and Minerals

Superhydrophobic surfaces were successfully created when zinc substrates were coated with molecules with low surface energy through grafting of fluorosilane molecules. The zinc substrate underwent water-treatment technique as a pre-coating procedure to enhance the reaction sites for the grafting of fluorosilane molecules. The water contact angle of the samples went as high as 161.1° ± 0.8°. At lower fluorosilane-ethanol soaking times, water contact angles have lower values while at higher soaking time, it has higher water contact angle values. At 240 min fluorosilane-ethanol soaking time, optimum value of water contact angle was achieved. Fluorosilane molecules are widely distributed through the …

Go to article

Sulfur-Doped Carbon Dots Derived From Caffeine: A Highly Efficient Photocatalyst For Organic Dye Degradation, Ganyaporn Wongwaen, Koranut Dechsri, Praneet Opanasopit, Montri Aiempanakit, Cheewita Suwanchawalit Jan 2025

Sulfur-Doped Carbon Dots Derived From Caffeine: A Highly Efficient Photocatalyst For Organic Dye Degradation, Ganyaporn Wongwaen, Koranut Dechsri, Praneet Opanasopit, Montri Aiempanakit, Cheewita Suwanchawalit

Journal of Metals, Materials and Minerals

Sulfur-doped carbon dots (S-doped CDs) were synthesized via a solvothermal method using caffeine as a carbon precursor and sodium sulfide as a sulfur source. Characterization using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet -visible (UV-Vis) spectroscopy, and photoluminescence spectroscopy (PL) confirmed successful sulfur incorporation. TEM revealed a uniform size distribution and graphitic structures, while UV-Vis analysis showed a reduction in the bandgap from 3.29 eV to 3.10 eV, improving light absorption and charge carrier separation. The photocatalytic activity of S-doped CDs was evaluated for indigo carmine (IC) dye degradation under UV irradiation, where 2S-CDs …

Go to article

Comprehensive Study On The Structural And Optical Properties Of Bismuth Manganese Oxide Composite Ceramic For Optoelectronic Applications, P. P. Nayak, B. Swain, R. R. Patro, S. S. Hota, O. P. Das, S. Bhuyan Jan 2025

Comprehensive Study On The Structural And Optical Properties Of Bismuth Manganese Oxide Composite Ceramic For Optoelectronic Applications, P. P. Nayak, B. Swain, R. R. Patro, S. S. Hota, O. P. Das, S. Bhuyan

Journal of Metals, Materials and Minerals

This work assessed the potential of bismuth manganese oxide composite ceramic for optoelectronic applications by methodically examining its structural, vibrational, and optical characteristics. X-ray diffraction (XRD) spectroscopy provided the coexistence of Bi12MnO20 (sillenite-type) and Bi2Mn4O10 (mullite-type) phases, indicating a deviation from the ideal perovskite structure and suggesting a complex crystallographic nature influencing its functional properties. Fourier transform infrared (FTIR) spectroscopy confirmed the modes of vibration of Bi–O and Mn–O bonds that were contained, supporting the structural composition. UV-Vis-NIR spectroscopy demonstrated strong optical absorption in the 300 nm to 800 nm range, affirming the suitability of the material for optoelectronic applications. …

Go to article

Synthesis And Characterization Of Silica Nanoparticles From Solar Panel Glass Cullet, Pathomporn Ussawanawachat, Nithiwach Nawaukkaratharnant, Apirat Theerapapvisetpong Jan 2025

Synthesis And Characterization Of Silica Nanoparticles From Solar Panel Glass Cullet, Pathomporn Ussawanawachat, Nithiwach Nawaukkaratharnant, Apirat Theerapapvisetpong

Journal of Metals, Materials and Minerals

The rapid growth of solar energy as a renewable resource has led to a significant increase in discarded solar panels. Recycling their glass components, especially fine cullet fragments, remains a major challenge due to impurity levels and processing limitations. This study proposes a sustainable approach to recycle solar panel glass cullet into high-purity silica nanoparticles using alkali fusion followed by acid precipitation. Process conditions including cullet to NaOH ratio, fusion temperature, and surfactant addition were optimized. The highest silica yield of 60.26% was achieved at a 1:1.4 cullet to NaOH ratio and 500℃. Polyethylene glycol (PEG 1000) was used as …

Go to article

Fem Modeling And Comparative Study Of Graphite Lubricants In The Hot Forging Of Aisi 1045 Medium Carbon Steel, Raschanan Poungprasert, Nattarawee Siripath, Naiyanut Jantepa, Surasak Suranuntchai Jan 2025

Fem Modeling And Comparative Study Of Graphite Lubricants In The Hot Forging Of Aisi 1045 Medium Carbon Steel, Raschanan Poungprasert, Nattarawee Siripath, Naiyanut Jantepa, Surasak Suranuntchai

Journal of Metals, Materials and Minerals

This study investigates the performance of water-based and oil-based graphite lubricants in the hot forging of AISI 1045 medium carbon steel, aiming to enhance product quality while minimizing die wear. Utilizing Finite Element Method (FEM) simulations and experimental analysis, we examined key factors including flow lines, dimensional accuracy, forging load, and die wear. Results indicate that oil-based graphite lubricants significantly outperform water-based options, achieving a lower average error of 0.26% in dimensional accuracy compared to 0.99% for water-based lubricants. Additionally, oil-based lubricants resulted in reduced forming loads, leading to improved energy efficiency and longer die life. Microstructural analysis revealed that …

Go to article

Impacts Of Calcination Temperature On The Crystallography, Granulometry And Impedance Of Licomno4, Chee Wayne Tan, Zul Hilmi Che Daud, Zainab Asus, Mohd Hasbullah Idris, Izhari Izmi Mazali, Mohd Kameil Abdul Hamid Jan 2025

Impacts Of Calcination Temperature On The Crystallography, Granulometry And Impedance Of Licomno4, Chee Wayne Tan, Zul Hilmi Che Daud, Zainab Asus, Mohd Hasbullah Idris, Izhari Izmi Mazali, Mohd Kameil Abdul Hamid

Journal of Metals, Materials and Minerals

Spinel structured lithium cobalt manganese oxide (LiCoMnO4) which exhibit reduction potential surpassing 5.0 V (vs. Li0 | Li+) was identified to be one of the prospective cathode candidates for next generation lithium-ion electrochemical systems. This article highlights the significance of calcination temperature on the crystallography of the resultant electroceramic compound as well as the corresponding response on the granulometry and impedance of LiCoMnO4. LiCoMnO4 compounds synthesised via sol-gel reaction in the first instance were converted into xerogel and subsequently subjected to facile one-step calcination protocol. Crystallography of the post-calcinated compounds were characterised via powder x-ray diffraction (XRD) technique. Temperature ranging …

Go to article

Effect Of Compaction Pressure On The Structure And Mechanical Properties Of Functionally Graded Aluminium-Glass Microsphere (Fgagm) Foams Produced By Powder Metallurgy Process, Vicheka Moeun, Seksak Asavavisithchai Jan 2025

Effect Of Compaction Pressure On The Structure And Mechanical Properties Of Functionally Graded Aluminium-Glass Microsphere (Fgagm) Foams Produced By Powder Metallurgy Process, Vicheka Moeun, Seksak Asavavisithchai

Journal of Metals, Materials and Minerals

Functionally graded aluminium-glass microsphere (FGAGM) foams were successfully fabricated via powder metallurgy. The influence of compaction pressure on the structural and mechanical properties of the foams was systematically investigated. The study observed that increasing compaction pressure enhanced the green (pre-sintering) density of FGAGM foam, while post-sintering densities exhibited a decreasing trend with higher compaction pressures. The mechanical examination indicated that mechanical properties improved significantly with higher compaction pressures. While higher compaction pressures generally improve mechanical properties, the study identified that excessive pressures could lead to the fracture of GM particles, introducing defects that compromise the foam's structural integrity. Therefore, determining …

Go to article

Effect Of Lanthanum Doping On Phase Transition, Piezoelectric And Energy Storage Properties Of Lead-Free 0.93(Bi0.5na0.5)Tio3‒0.07batio3 Ceramics, Pathit Premwichit, Songphop Jaila, Sasiporn Prasertpalichat Jan 2025

Effect Of Lanthanum Doping On Phase Transition, Piezoelectric And Energy Storage Properties Of Lead-Free 0.93(Bi0.5na0.5)Tio3‒0.07batio3 Ceramics, Pathit Premwichit, Songphop Jaila, Sasiporn Prasertpalichat

Journal of Metals, Materials and Minerals

In this study, lead-free (Bi0.465Na0.465Ba0.07)(1–x)LaxTiO3 (x=0.0‒0.04) ceramics were synthesized using a conventional solid-state reaction method. All samples showed a single-phase perovskite structure with pseudocubic symmetry. The dense microstructure revealed a decrease in average grain size as x increased. La3+ addition stabilized polar nanoregions (PNRs), shifting the ferroelectric to relaxor phase transition temperature (TF₋R=104℃ for x=0.0) to below room temperatures as La3+ content increased. This resulted in a transition from a rectangular to a relaxor-like thin P–E loop (x≥0.01), indicating a shift from ferro-electric (FE) to relaxor ferroelectric (RFE), which …

Go to article

Structural Tuning Of Bioi Toward Bi O /Agi Heterostructures Via Room-Temperature Ion Exchange For Improved Photocatalytic Activity, Varunya Atimayulerd, Sorawit Thueanbangyang, Kittiyaporn Singsumphan, Ganyaporn Wongwaen, Cheewita Suwanchawalit, Montri Aiempanakit Jan 2025

Structural Tuning Of Bioi Toward Bi O /Agi Heterostructures Via Room-Temperature Ion Exchange For Improved Photocatalytic Activity, Varunya Atimayulerd, Sorawit Thueanbangyang, Kittiyaporn Singsumphan, Ganyaporn Wongwaen, Cheewita Suwanchawalit, Montri Aiempanakit

Journal of Metals, Materials and Minerals

In this work, a bismuth oxide/silver iodide (Bi2O3/AgI) heterojunction photocatalyst was successfully fabricated via a room-temperature ion exchange process using bismuth oxyiodide (BiOI) as a morphology-directing precursor. Building upon our previous work on solvent-modulated BiOI nanostructures, this study employs a chemical transformation route to develop interfacially connected heterostructures while preserving key morphological features. Structural, morphological, and optical characterizations, including X-ray diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, and ultraviolet–visible diffuse reflectance spectroscopy, provided supporting evidence for the successful formation of Bi2O3/AgI heterojunctions with likely close interfacial contact. The optimized Bi2O3/AgI composite with a 50:50 mass ratio …

Go to article

Laser Ablation Behavior And Ablation Threshold Of Entropy-Controlled Perovskite Coatings, Shuo Wang, Junyang Lu, Mengqing Zhang, Jiayi Zheng, Tong Zhang Jan 2025

Laser Ablation Behavior And Ablation Threshold Of Entropy-Controlled Perovskite Coatings, Shuo Wang, Junyang Lu, Mengqing Zhang, Jiayi Zheng, Tong Zhang

Journal of Metals, Materials and Minerals

The protection threshold of laser ablation resistant materials lags behind the development of laser power density. Single-functional laser ablation resistant materials can no longer meet the practical needs. High-entropy perovskites with infinite chemical composition, tunable bandgap structure, and efficient thermal management capabilities provide new ideas for developing novel high-reflectivity and low-thermal-conductivity multifunctional laser ablation resistant materials. Herein, leveraging these unique advantages of high-entropy perovskites in optics and thermodynamics, four entropy-controlled perovskite coatings, Ba(Zn1/2Ta1/2)O3 (BZTO), Ba(Zn1/3Ta1/3Nb1/3)O3 (BZTNO), Ba(Zn1/4Ta1/4Nb1/4Ti1/4)O3 (BZTNTO) and Ba(Zn1/5Ta1/5Nb1/5Ti1/5Zr1/5)O3 (BZTNTZO) are designed. Through time-dependent laser ablation experiments, the optical and thermal properties are comprehensively evaluated. And laser ablation behavior …

Go to article

Aluminium Oxide Particles-Containing Organogels For Cleaning Of Optical Glass Surfaces, Galina Vladimirovna Lyamina, Oksana Valerievna Dubinina, Alfa Edison I Lela Jan 2025

Aluminium Oxide Particles-Containing Organogels For Cleaning Of Optical Glass Surfaces, Galina Vladimirovna Lyamina, Oksana Valerievna Dubinina, Alfa Edison I Lela

Journal of Metals, Materials and Minerals

Hypothesis:  Some types of cleaning methods are not very effective and can actually increase damage to the optical parts being cleaned. As an alternative to these methods, we propose the use of gel-like substances to remove contaminants from optical surfaces. We have developed a method for cleaning optical glass surfaces that uses organogels, which are based on copolymers of methyl methacrylate and methacrylic acid. These organogels are loaded with polyethylene glycol, and aluminum oxide particles (Al2O3), which help to effectively remove contaminants without causing damage to the surface.   Experiments:  Al2O3 nanoparticles prepared by a Nano Spray Dryer were added to …

Go to article

Optically Stimulated Luminescence Dating Of Earthenware From The Nam Tok Khao Pang Archaeological Site, Kanchanaburi, Thailand, Thananan Phetkongtong, Peerasak Klubket, Santi Pailoplee, Pichet Limsuwan, Voranuch Thongpool Jan 2025

Optically Stimulated Luminescence Dating Of Earthenware From The Nam Tok Khao Pang Archaeological Site, Kanchanaburi, Thailand, Thananan Phetkongtong, Peerasak Klubket, Santi Pailoplee, Pichet Limsuwan, Voranuch Thongpool

Journal of Metals, Materials and Minerals

The Nam Tok Khao Pang archaeological site, located in Tha Sao subdistrict, Sai Yok district, Kanchanaburi province, Thailand, is a limestone cave where numerous artifacts, including black-burnished earthenware fragments with in-curving rims, out-curving rims, and carinated bodies, have been discovered. Mineralogical and microstructural analyses using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) identified quartz (SiO₂) as the dominant mineral phase within a partially sintered silicate matrix. The absence of vitrification and the presence of mineral impurities indicate that the earthenware was fired at temperatures between 900°C and 1000°C. To determine the age of these ceramics, …

Go to article

Downstreaming Of Natural Materials Huta Ginjang Quartz Sand Doped With Nd2o3 For Laser Medium Application, Juniastel Rajagukguk, Jakrapong Kaewkhao Jan 2025

Downstreaming Of Natural Materials Huta Ginjang Quartz Sand Doped With Nd2o3 For Laser Medium Application, Juniastel Rajagukguk, Jakrapong Kaewkhao

Journal of Metals, Materials and Minerals

The QSBoBa glasses with chemical formula 10 Quartz sand + (50-x) B2O3 + 10BaO + 30Na2O + xNd2O3 (x = 0, 0.5, 1, 1.5, and 2 mol%) were prepared by a conventional melt-quenching technique. The successfully fabricated glass samples will be analyzed based on their physical, structural, optical and luminescent properties. The XRD and FTIR spectra have been included to observe the complete structural properties. Optical absorption spectra revealed several characteristic transitions, with a prominent hypersensitive transition 4I9/2→4G5/2 at 584 nm, indicating an increasing asymmetry and disorder at higher Nd3+ concentrations. The photoluminescence emission spectra demonstrated strong radiative transitions of …

Go to article

Crack Development Of Electroplated Niw Alloys And Their Wettability And Tribological Properties, Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz Dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat Jan 2025

Crack Development Of Electroplated Niw Alloys And Their Wettability And Tribological Properties, Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz Dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

Journal of Metals, Materials and Minerals

This study investigates how sodium tungstate concentration (20–46 wt.%) and current density (40–60 A/dm²) affect the microstructure, wettability, mechanical properties, and tribological behavior of electrodeposited Ni-W coatings. Results show that increasing current density markedly raises crack density (from <100 to >400 cracks/cm²), while tungstate concentration has minimal effect. XRD confirms Ni-W solid solution formation, with higher tungsten content refining grains and increasing hardness—peaking at 900 HV at 50 A/dm² (an 80% rise from 500 HV at 40 A/dm²). However, excessive stress at 60 A/dm² leads to microcracking and hardness plateauing (~650–700 HV). Higher crack density improves wettability (contact angle ~17°), enhancing lubricant …

Go to article

Facile Bio-Synthesis Of Cerium Oxide Nanoparticles, Characterization And Their Photocatalytic Potential In The Degradation Of Real Tannery Wastewater, Ganeshkumar Govindasamy, A. Babu Ponnusami Jan 2025

Facile Bio-Synthesis Of Cerium Oxide Nanoparticles, Characterization And Their Photocatalytic Potential In The Degradation Of Real Tannery Wastewater, Ganeshkumar Govindasamy, A. Babu Ponnusami

Journal of Metals, Materials and Minerals

The sustainable metal oxide photocatalysts using plant extract presents a viable alternative to conventional chemical synthesis techniques. In this study, spherical shaped cerium oxide nanoparticles were synthesized using ammonium ceric nitrate and Peepal Leaves (PL) extracted and used as a photocatalyst to remove hexavalent chromium and chemical oxygen demand from actual tannery wastewater. The characterization of cerium oxide nanoparticles was carried out using UV-Visible spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller surface area analysis, Field Emission-Scanning Electron Microscopy with energy-dispersive X-ray spectroscopy, Raman analysis, High Resolution-Transmission Electron Microscopy and Zeta potential analysis. The band gap energy of 3.25 eV was …

Go to article

Upcycled Waste-Derived Triboelectric Nanogenerator For Sustainable Energy Harvesting, Archana Panda, Basanta Kumar Panigrahi, Subhendu Pati, Sunit Gourav Mohanty, Kushal Ruthvik Kaja Jan 2025

Upcycled Waste-Derived Triboelectric Nanogenerator For Sustainable Energy Harvesting, Archana Panda, Basanta Kumar Panigrahi, Subhendu Pati, Sunit Gourav Mohanty, Kushal Ruthvik Kaja

Journal of Metals, Materials and Minerals

The proliferation of disposable paper-based materials in laboratories has raised significant environmental concerns due to their rapid discard and accumulation. This study explores the upcycling of commonly discarded laboratory waste, specifically butter paper and polyurethane (PU) foam, into a single-electrode triboelectric nanogenerator (TENG) for mechanical energy harvesting. The fabricated device employs butter paper as the positive triboelectric layer and PU foam as the negative layer, with an aluminium tape electrode. Electrical tests reveal a peak voltage of 21 V and current of 47 nA, reaching a maximum power of 438 nW at 500 MΩ load. The TENG demonstrates stable performance …

Go to article

Durability Of Precast Prestressed Concrete Pile In Exposure Severe Environment, Nantawat Khomwan, Pinai Mungsantisuk Jan 2025

Durability Of Precast Prestressed Concrete Pile In Exposure Severe Environment, Nantawat Khomwan, Pinai Mungsantisuk

Journal of Metals, Materials and Minerals

This research project focuses on studying the corrosion resistance of precast prestressed concrete (PC) piles under severe conditions. All PC and non-PC samples were cast using Portland cement type III. The samples included 1 m and 6 m length specimens. To evaluate the effectiveness of corrosion prevention, Sacrificial Anode Cathodic Protection (SACP) was installed in the specimens. Various durability properties of concrete were tested, including chloride permeability, concrete resistivity, and half-cell potential. For short-term effects, an electrical accelerated condition was conducted for the 1 m specimens, which were submerged in a 5% sodium chloride solution by weight. Experimental studies were …

Go to article

Enhancing Acetone Gas Sensor Performance With Cobalt Oxide Doping In Lafeo3 Prepared By Co-Precipitation, Andhy Setiawan, Farah Aprisza Sheelmarevaa, Muhamad Taufik Ulhakim, Dani Gustaman Syarif, Endi Suhendi Jan 2025

Enhancing Acetone Gas Sensor Performance With Cobalt Oxide Doping In Lafeo3 Prepared By Co-Precipitation, Andhy Setiawan, Farah Aprisza Sheelmarevaa, Muhamad Taufik Ulhakim, Dani Gustaman Syarif, Endi Suhendi

Journal of Metals, Materials and Minerals

Semiconductor-based gas sensors frequently encounter difficulties in attaining optimal performance due to challenges such as temporal stability and low sensitivity, stemming from their insulating properties at room temperature. To address these limitations, this study proposes a novel approach by preparing cobalt-doped LaFeO3 (LaFeO3-Co) using the co-precipitation method, with doping concentrations of 2.5 mol% and 5.0 mol%. The acetone gas sensors were fabricated into thick films via the screen-printing technique, and their performance was thoroughly characterized. X-ray diffraction (XRD) analysis confirmed a cubic crystal structure, and the addition of 2.5 mol% cobalt was found to reduce the particle size of LaFeO3, …

Go to article

The Effects Of Starting Microstructure On The Results Of Double Intercritical Annealing Process Of 0.107%C-2.39%Mn-0.453%Si Dual Phase Steel, Wichayut Chumoung, Nithi Saenarjhan Jan 2025

The Effects Of Starting Microstructure On The Results Of Double Intercritical Annealing Process Of 0.107%C-2.39%Mn-0.453%Si Dual Phase Steel, Wichayut Chumoung, Nithi Saenarjhan

Journal of Metals, Materials and Minerals

This study investigates and compares the effects of the starting microstructure on the double intercritical annealing (DIA) process on the microstructure and mechanical properties of 0.11%C-2.39%Mn-0.45%Si dual phase steel. The specimens were austenitized, followed by water quenching (WQ) or air cooling (AC), then DIA at 730°C. For the WQ method, high cooling rate results in the formation of a high strength martensitic structure. Conversely, AC method yields a moderate cooling rate, forming a bainitic structure. After single intercritical annealing (SIA), the microstructure transformed into ferrite and martensite. WQ method specimens contain high stress concentration, leading to earlier recrystallization compared to …

Go to article

Effects Of Thickness On The Performance Of Sno2 Gas Sensors Using Low-Temperature Co-Fired Ceramic, Montri Aiempanakit, Kittiyaporn Singsumphan, Chutima Nakmuk, Cheewita Suwanchawalit, Manatsawee Srirak, Kata Jaruwongrungsee, Anurat Wisitsoraat, Monrudee Liangruksa, Chawarat Siriwong Jan 2025

Effects Of Thickness On The Performance Of Sno2 Gas Sensors Using Low-Temperature Co-Fired Ceramic, Montri Aiempanakit, Kittiyaporn Singsumphan, Chutima Nakmuk, Cheewita Suwanchawalit, Manatsawee Srirak, Kata Jaruwongrungsee, Anurat Wisitsoraat, Monrudee Liangruksa, Chawarat Siriwong

Journal of Metals, Materials and Minerals

This study develops SnO2-based gas sensors integrated with a low-temperature co-fired ceramic (LTCC) micro hotplate for ethanol detection. SnO2 nanoparticles were synthesized using a simple precipitation method, and sensing layers with varying thicknesses around 0.24 µm, 0.71 µm, and 1.20 µm were applied to evaluate their influence on performance. The results show that the optimal configuration is a 0.71 µm layer, offering high sensitivity, fast response, and efficient recovery. Operating at a low voltage of 3.2 V, the sensors exhibit low power consumption, suitable for portable and battery-operated applications. The gas-sensing mechanism relies on changes in resistance due to interactions …

Go to article

Investigation Of Photocathodic Corrosion Protection Of Zno/Zns Thin Film For Aisi 304 Stainless Steel In 3.5 Wt% Nacl Solution, Soravid Veerapong, Naw Blessing Oo, Boossayamas Dachbumroong, Parichart Chaum, Thanate Na Wichean, Oratai Jongprateep, Naray Pewnim, Gasidit Panomsuwan, Ratchatee Techapiesancharoenkij Jan 2025

Investigation Of Photocathodic Corrosion Protection Of Zno/Zns Thin Film For Aisi 304 Stainless Steel In 3.5 Wt% Nacl Solution, Soravid Veerapong, Naw Blessing Oo, Boossayamas Dachbumroong, Parichart Chaum, Thanate Na Wichean, Oratai Jongprateep, Naray Pewnim, Gasidit Panomsuwan, Ratchatee Techapiesancharoenkij

Journal of Metals, Materials and Minerals

Photocathodic protection is an alternative cathodic protection technique to protect metals by photo-generated electrons from a coupled semiconductor film under solar light. In this report, ZnO nanorods and heterostructure ZnO/ZnS nanorod films  on FTO substrates were studied for their photocathodic protection for 304 stainless steels (304 SS) in a 3.5 wt% NaCl solution.  The ZnO and ZnO/ZnS nanorods were fabricated on FTO substrates by spray pyrolysis and hydrothermal processes. The photocathodic performances of the ZnO and ZnO/ZnS photoanodes coupled with 304 SS samples were examined by Open-Circuit Potential (OCP), polarization curve analysis, and electrochemical impedance spectra (EIS). The ZnO/ZnS photoanodes …

Go to article

Investigation Into Parameters Affecting The Synthesis Of Hybrid Gold Nanoparticle/ Nitrogen-Doped Carbon Dot Colloids, Thammika Srisaman, Anyarat Watthanaphanit Jan 2025

Investigation Into Parameters Affecting The Synthesis Of Hybrid Gold Nanoparticle/ Nitrogen-Doped Carbon Dot Colloids, Thammika Srisaman, Anyarat Watthanaphanit

Journal of Metals, Materials and Minerals

This study reports a two-step synthesis method for producing hybrid nanoparticles composed of gold nanoparticles (AuNPs) and nitrogen-doped carbon dots (CDs). Initially, we employed hydrothermal synthesis to fabricate CDs derived from mangosteen peel extract, which exhibits green light emission. Subsequently, the hybrid AuNPs/CDs were synthesized by inducing plasma in a solution containing CDs and a gold precursor, namely gold(III) chloride trihydrate. Our primary aim was to investigate the key parameters influencing the synthesis process. We assessed the colloidal properties of the AuNPs/ CDs by introducing a stabilizer, specifically sodium alginate, and examined how factors such as the presence of sodium …

Go to article

Atmospheric Corrosion Of Hot Dip Galvanized Structural Steel Exposed To The Tropical Climate Of Thailand, Adithep Bunphot, Pakawat Sancharoen, Somnuk Tangtermsirikul, Taweep Chaisomphob Jan 2025

Atmospheric Corrosion Of Hot Dip Galvanized Structural Steel Exposed To The Tropical Climate Of Thailand, Adithep Bunphot, Pakawat Sancharoen, Somnuk Tangtermsirikul, Taweep Chaisomphob

Journal of Metals, Materials and Minerals

Hot dip galvanized steels were tested in the atmospheric tropical climate environments of Thailand for 12 month from March 2021 to March 2022. Three locations were studied, i.e. a rural area at Saraburi in the central part, an industrial area at Chonburi in the eastern part, and a coastal/urban area at Songkhla in the southern part of Thailand. The thickness loss of the galvanized steel samples was measured by the weight loss method. Types of corrosion products observed on the samples were zincite, wulfingite, hydrozincite, and simonkolleite. All of them were found on the sample at Songkhla. Three of them, …

Go to article

Arginine-Modified Surface Coffee Grounds Activated Carbon For Pb2+ Adsorption: Kinetic, Isotherm And Thermodynamic Studies, Jarawee Chupirom, Sirikorn Khaophong, Nopporn Hemyakorn, Sonchai Intachai, Panita Kongsune Jan 2025

Arginine-Modified Surface Coffee Grounds Activated Carbon For Pb2+ Adsorption: Kinetic, Isotherm And Thermodynamic Studies, Jarawee Chupirom, Sirikorn Khaophong, Nopporn Hemyakorn, Sonchai Intachai, Panita Kongsune

Journal of Metals, Materials and Minerals

This research focuses on enhancing the value of coffee waste by converting it into activated carbon for removing Pb²⁺ ions from contaminated water. Coffee grounds were activated with KOH and carbonized at 600°C for 4 h to produce activated carbon (CGAC), then modified with arginine via hydrothermal treatment at 120°C for 48 h to create Arg-CGAC. The adsorbents' chemical and physical properties were analyzed using SEM, FT-IR, BET, and pHpzc methods. Batch experiments revealed that Arg-CGAC exhibited superior Pb2+ adsorption (223.10 mg∙g‒1) compared to CGAC (119.23 mg∙g‒1) under optimal conditions. Isotherm analysis showed stronger adsorbate-adsorbent interactions and a more endothermic …

Go to article

Enhancement Of Cell Viability Of The (Ba,Ca)(Zr,Ti)O And Hydroxyapatite Composites For Bone-Repair Applications, Jirapa Tangsritrakul, Manita Boonchoo, Piyanan Boonphayak, Paweena Uppanan, Pakkanun Kaewkong Jan 2025

Enhancement Of Cell Viability Of The (Ba,Ca)(Zr,Ti)O And Hydroxyapatite Composites For Bone-Repair Applications, Jirapa Tangsritrakul, Manita Boonchoo, Piyanan Boonphayak, Paweena Uppanan, Pakkanun Kaewkong

Journal of Metals, Materials and Minerals

In this work, the influence of hydroxyapatite (HA) addition to the calcium/zirconium-doped barium titanate (BCZT) piezoceramic was investigated to evaluate its potential for bone-repair applications. The relationship between the physical, electrical, and biological properties of the (100-x)BCZT-(x)HA composite was observed via various techniques. The HA powder was synthesized via precipitation method, whereas the BCZT powder was produced by solid-state reaction to prepare the (100-x)BCZT-(x)HA composites, where x = 0 wt% to 50 wt%. The results showed that the dielectric, ferroelectric, and piezoelectric properties of the (100-x)BCZT-(x)HA composites decreased dramatically as introducing HA into BCZT due to the occurrence of secondary …

Go to article

First Prev Next Last