Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2024

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 691 - 720 of 925

Full-Text Articles in Materials Science and Engineering

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang Feb 2024

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang

Journal of Electrochemistry

In recent years, joint time-frequency analysis has once again become a research hotspot. Supercapacitors have high power density and long service life, however, in order to balance between power density and energy density, two key factors need to be considered: (i) the specific surface area of the porous matrix; (ii) the electrolyte accessibility to the intra-pore space of porous carbon matrix. Electrochemical impedance spectra are extensively used to investigate charge penetration ratio and charge storage mechanism in the porous electrode for capacitance energy storage. Furthermore, similar results could be obtained by different methods such as stable-state analysis in the frequency …

Go to article

A Study On High-Frequency Bending Fatigue, Microhardness, Tensile Strength, And Microstructure Of Parts Made Using Atomic Diffusion Additive Manufacturing (Adam) And Additive Friction Stir Deposition (Afsd), Hamed Ghadimi Feb 2024

A Study On High-Frequency Bending Fatigue, Microhardness, Tensile Strength, And Microstructure Of Parts Made Using Atomic Diffusion Additive Manufacturing (Adam) And Additive Friction Stir Deposition (Afsd), Hamed Ghadimi

LSU Doctoral Dissertations

This dissertation reports the findings of several studies on the mechanical and microstructural properties of parts made using atomic diffusion additive manufacturing (ADAM) and additive friction stir deposition (AFSD). The design of a small-sized bending-fatigue test specimen for an ultrasonic fatigue testing system is reported in Chapter 1. The design was optimized based on the finite element analysis and analytical solution. The stress–life (S–N) curve is obtained for Inconel alloy 718. Chapter 2 presents the findings of ultrasonic bending-fatigue and tensile tests carried out on the ADAM test specimens. The S-N curves were created in the very high-cycle fatigue regime. …

Go to article

Formulation And Aerosol Jet Printing Of Nickel Nanoparticle Ink For High-Temperature Microelectronic Applications And Patterned Graphene Growth, Nicholas Mckibben, Michael Curtis, Olivia Maryon, Mone’T Sawyer, Maryna Lazouskaya, Josh Eixenberger, Zhangxian Deng, David Estrada Feb 2024

Formulation And Aerosol Jet Printing Of Nickel Nanoparticle Ink For High-Temperature Microelectronic Applications And Patterned Graphene Growth, Nicholas Mckibben, Michael Curtis, Olivia Maryon, Mone’T Sawyer, Maryna Lazouskaya, Josh Eixenberger, Zhangxian Deng, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

Aerosol jet printing (AJP) is an advanced manufacturing technique for directly writing nanoparticle inks onto target substrates. It is an emerging reliable, efficient, and environmentally friendly fabrication route for thin film electronics and advanced semiconductor packaging. This fabrication technique is highly regarded for its rapid prototyping, the flexibility of design, and fine feature resolution. Nickel is an attractive high-temperature packaging material due to its electrical conductivity, magnetism, and corrosion resistance. In this work, we synthesized nickel nanoparticles and formulated an AJP ink, which was printed on various material surfaces. Thermal sintering experiments were performed on the samples to explore the …

Go to article

Fly Ash Coated With Alumina Sol For Improving Strength And Thermal Insulation Of Mullite Porous Ceramics, Minghui Li, Peilin Li, Qingqing Gao, Saisai Li, Ruoyu Chen, Haiming Wen, Canhua Li Feb 2024

Fly Ash Coated With Alumina Sol For Improving Strength And Thermal Insulation Of Mullite Porous Ceramics, Minghui Li, Peilin Li, Qingqing Gao, Saisai Li, Ruoyu Chen, Haiming Wen, Canhua Li

Materials Science and Engineering Faculty Research & Creative Works

The manufacturing of mullite porous ceramics with high strength and low thermal conductivity was achieved through foam gel-casting processes using fly ash coated with alumina sol layers. This research aimed to investigate the effect of alumina sol concentration on foaming slurry rheology, as well as the influence of alumina sol coating layers on the microstructure, phase compositions and properties of the resulting mullite porous ceramics. Increasing the alumina sol concentration from 5 to 20 wt% improved both the viscosity and thixotropy of the foaming slurries while enhanced the shear thinning behavior. Porous ceramics prepared with fly ash coated with alumina …

Go to article

Material Order: A Discovery Group And Shared Catalogue For Materials Collections, Mark Pompelia, Margot Mcilwain Nishimura Feb 2024

Material Order: A Discovery Group And Shared Catalogue For Materials Collections, Mark Pompelia, Margot Mcilwain Nishimura

Faculty & Librarian Work

Material Order is an academic consortium of material sample collections for art, architecture, and design disciplines. Founded by the Graduate School of Design at Harvard University and Fleet Library at Rhode Island School of Design and since comprising several more institutions in the US, it provides a community-based approach to management and open access utilizing and developing standards and best practices. Now in its twelfth year and reaching a level of maturation, Material Order offers research and pedagogical value to current and potential members and the larger design communities.

Go to article

Experimental Thermal Conductivity Studies Of Agar-Based Aqueous Suspensions With Lignin Magnetic Nanocomposites, Bishal Gautam, Saja M. Nabat Al-Ajrash, Mohammad Jahid Hasan, Abhishek Saini, Sarah J. Watzman, Esteban Ureña-Benavides, Erick S. Vasquez-Guardado Feb 2024

Experimental Thermal Conductivity Studies Of Agar-Based Aqueous Suspensions With Lignin Magnetic Nanocomposites, Bishal Gautam, Saja M. Nabat Al-Ajrash, Mohammad Jahid Hasan, Abhishek Saini, Sarah J. Watzman, Esteban Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

Nanoparticle additives increase the thermal conductivity of conventional heat transfer fluids at low concentrations, which leads to improved heat transfer fluids and processes. This study investigates lignin-coated magnetic nanocomposites (lignin@Fe3O4) as a novel bio-based magnetic nanoparticle additive to enhance the thermal conductivity of aqueous-based fluids. Kraft lignin was used to encapsulate the Fe3O4 nanoparticles to prevent agglomeration and oxidation of the magnetic nanoparticles. Lignin@Fe3O4 nanoparticles were prepared using a pH-driven co-precipitation method with a 3:1 lignin to magnetite ratio and characterized by X-ray diffraction, FT-IR, thermogravimetric analysis, and transmission electron …

Go to article

Pisa Printing Microneedles With Controllable Aqueous Dissolution Kinetics, Aaron Priester, Jimmy Yeng, Yuwei Zhang, Krista Hilmas, Risheng Wang, Anthony J. Convertine Feb 2024

Pisa Printing Microneedles With Controllable Aqueous Dissolution Kinetics, Aaron Priester, Jimmy Yeng, Yuwei Zhang, Krista Hilmas, Risheng Wang, Anthony J. Convertine

Chemistry Faculty Research & Creative Works

This study focused on the development of high-resolution polymeric structures using polymer-induced self-assembly (PISA) printing with commercially available digital light-processing (DLP) printers. Significantly, soluble solids could be 3D-printed using this methodology with controllable aqueous dissolution rates. This was achieved using a highly branched macrochain transfer agent (macro-CTA) containing multiple covalently attached CTA groups. In this work, the use of acrylamide as the self-assembling monomer in isopropyl alcohol was explored with the addition of N-(butoxymethyl)acrylamide to modulate the aqueous dissolution kinetics. PISA-printed microneedles were observed to have feature sizes as small as 27 μm, which was close to the resolution limit …

Go to article

Progress In Energy: Usa–Canada Special Issue On Energy, Yun Hang Hu Feb 2024

Progress In Energy: Usa–Canada Special Issue On Energy, Yun Hang Hu

Michigan Tech Publications

No abstract provided.

Go to article

Degradation Of The Mechanical Properties And Hydrogen Generation In Cement Under Gamma Irradiation Assessed By Atomistic Simulation, Omar Al Najjar Feb 2024

Degradation Of The Mechanical Properties And Hydrogen Generation In Cement Under Gamma Irradiation Assessed By Atomistic Simulation, Omar Al Najjar

Theses and Dissertations

Although understanding the effect of the gamma-ray on cement-based materials is essential for many applications, such as the concrete contaminate of nuclear reactors or the storage of radioactive waste in cement-based waste forms, such understanding is still not fully developed. The importance of having such an understanding is becoming of utmost importance, especially with calls to extend the lifetime of nuclear power plants, and also due to some recent incidents of failures of the concrete structure in the nuclear fields. In this work, the details of preparing three molecular models as a representative structure of the main binding phase of …

Go to article

Understanding Roles And Evaluating Reactivity Of Fly Ashes In Calcium Aluminate Binders, Sai Akshay Ponduru, Taihao Han, Jie Huang, Narayanan Neithalath, Gaurav Sant, Aditya Kumar Feb 2024

Understanding Roles And Evaluating Reactivity Of Fly Ashes In Calcium Aluminate Binders, Sai Akshay Ponduru, Taihao Han, Jie Huang, Narayanan Neithalath, Gaurav Sant, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

Calcium aluminate cement (CAC) is an alternative to Portland cement, valued for its superior early strength and thermal resistance. Partially replacing CAC with Fly ash (FA) can reduce carbon footprint and production costs of CAC, producing sustainable cementitious binders. This research investigates on various properties (i.e., hydration kinetics; phase assemblage evolution; compressive strength) of [CAC + FA] binders. Using 13 distinct FAs, up to 50% of CAC was substituted. The study measures hydration kinetics, compressive strength, and employs the number of constraints to estimate FA reactivity. Advanced quantitative analysis draws links between hydration kinetics and compressive strength and elucidate the …

Go to article

Ion Irradiation And Examination Of Additive Friction Stir Deposited 316 Stainless Steel, Priyanka Agrawa, Ching-Heng Shiau, Aishani Sharma, Zhihan Hu, Megha Dubey, Yu Lu, Lin Shao, Ramprashad Prabhakaran, Yaqiao Wu, Rajiv S. Mishra Feb 2024

Ion Irradiation And Examination Of Additive Friction Stir Deposited 316 Stainless Steel, Priyanka Agrawa, Ching-Heng Shiau, Aishani Sharma, Zhihan Hu, Megha Dubey, Yu Lu, Lin Shao, Ramprashad Prabhakaran, Yaqiao Wu, Rajiv S. Mishra

Materials Science and Engineering Faculty Publications and Presentations

This study explored solid-state additive friction stir deposition (AFSD) as a modular manufacturing technology, with the aim of enabling a more rapid and streamlined on-site fabrication process for large meter-scale nuclear structural components with fully dense parts. Austenitic 316 stainless steel (SS) is an excellent candidate to demonstrate AFSD, as it is a commonly-used structural material for nuclear applications. The microstructural evolution and concomitant changes in mechanical properties after 5 MeV Fe++ ion irradiation were studied comprehensively via transmission electron microscopy and nanoindentation. AFSD-processed 316 SS led to a fine-grained and ultrafine-grained microstructure that resulted in a simultaneous increase …

Go to article

Residual Optical Absorption From Native Defects In Cdsip2 Crystals, Timothy D. Gustafson, Nancy C. Giles, Elizabeth M. Scherrer, Kevin T. Zawilski, Peter G. Schunemann, Kent L. Averett, Jonathan E. Slagle, Larry E. Halliburton Feb 2024

Residual Optical Absorption From Native Defects In Cdsip2 Crystals, Timothy D. Gustafson, Nancy C. Giles, Elizabeth M. Scherrer, Kevin T. Zawilski, Peter G. Schunemann, Kent L. Averett, Jonathan E. Slagle, Larry E. Halliburton

Faculty Publications

CdSiP2 crystals are used in optical parametric oscillators to produce tunable output in the mid-infrared. As expected, the performance of the OPOs is adversely affected by residual optical absorption from native defects that are unintentionally present in the crystals. Electron paramagnetic resonance (EPR) identifies these native defects. Singly ionized silicon vacancies (V-Si) are responsible for broad optical absorption bands peaking near 800, 1033, and 1907 nm. A fourth absorption band, peaking near 630 nm, does not involve silicon vacancies. Exposure to 1064 nm light when the temperature of the CdSiP2 crystal is near 80K converts …

Go to article

Vaccine Immunogenicity Versus Gastrointestinal Microbiome Status: Implications For Poultry Production, Chrysta N. Beck, Jiangchao Zhao, Gisela F. Erf Feb 2024

Vaccine Immunogenicity Versus Gastrointestinal Microbiome Status: Implications For Poultry Production, Chrysta N. Beck, Jiangchao Zhao, Gisela F. Erf

Poultry Science Faculty Publications and Presentations

At the turn of the 21st century, the importance of maintaining a balanced microbiome was brought to the forefront of the microbiology, immunology, and physiology research fields. Exploring the complex interactions between vaccine administration, mucosal microbiome, oral tolerance, and enteric inflammation in health and disease is challenging since environmental factors (such as diet and sanitation) have major influences on gut microbiota composition. High enteric pathogen load has been shown to contribute to dampened cell-mediated and humoral immune responses to vaccines in human case studies, either through elevated enteric inflammation or increased tolerance to environmental microbes. Although antibiotic and probiotic interventions …

Go to article

Inhibited Surface Diffusion In Nanoporous Multi-Principal Element Alloy Thin Films Prepared By Vacuum Thermal Dealloying, Tibra Das Gupta, Thomas John Balk Feb 2024

Inhibited Surface Diffusion In Nanoporous Multi-Principal Element Alloy Thin Films Prepared By Vacuum Thermal Dealloying, Tibra Das Gupta, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Nanoporous structures with 3D interconnected networks are traditionally made by dealloy- ing a binary precursor. Certain approaches for fabricating these materials have been applied to refrac- tory multi-principal element alloys (RMPEAs), which can be suitable candidates for high-temperature applications. In this study, nanoporous refractory multi-principal element alloys (np-RMPEAs) were fabricated from magnesium-based thin films (VMoNbTaMg) that had been prepared by magnetron sputtering. Vacuum thermal dealloying (VTD), which involves sublimation of a higher vapor pres- sure element, is a novel technique for synthesizing nanoporous refractory elements that are prone to oxidation. When VMoNbTaMg was heated under vacuum, a nanoporous structure was …

Go to article

The Roles Of Carbonaceous Wastes For Catalysis, Energy, And Environmental Remediation, Chi Huey Ng, Mohd Aizzan Mistoh, Siow Hwa Teo, Andrea Galassi, Hin Taufiq-Yap, Nancy Julius Siambun, Jurry Foo, Coswald Stephen Sipaut, Jeffrey Seay, Jidon Janaun Feb 2024

The Roles Of Carbonaceous Wastes For Catalysis, Energy, And Environmental Remediation, Chi Huey Ng, Mohd Aizzan Mistoh, Siow Hwa Teo, Andrea Galassi, Hin Taufiq-Yap, Nancy Julius Siambun, Jurry Foo, Coswald Stephen Sipaut, Jeffrey Seay, Jidon Janaun

Chemical and Materials Engineering Faculty Publications

This article reviews recent studies about various generations of the carbon materials for their applications in energy and environmental remediation. The synthesis routes of the carbon materials including the condition parameters, interaction of precursors, dopants and carbon materials, as well as their physical/chemical properties are explicated first. Then, the application and mechanism of metal-free/metal-doped/non-metal-doped carbon materials are discussed in detail. Lastly, this review is ended with a summary and invigorating perspectives on the challenges and future directions at the forefront of the catalysis platform to take a step further for real application.

Go to article

Investigating The Structure And Performance Of Electrodes Made By Dry And Wet Slurry Processes, Kubra Uzun, Bhamiti Sharma, Bradley R. Frieberg, Ming Wang, Jiazhi Hu, Anita Li, Xiaosong Huang, Yang-Tse Cheng Feb 2024

Investigating The Structure And Performance Of Electrodes Made By Dry And Wet Slurry Processes, Kubra Uzun, Bhamiti Sharma, Bradley R. Frieberg, Ming Wang, Jiazhi Hu, Anita Li, Xiaosong Huang, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

Performance, cost, and safety are vital factors in producing and handling lithium-ion batteries. Using a dry process reduces the cost and environmental impact of producing large-scale lithium-ion battery electrodes significantly as solvents are eliminated. Thus, in this study, solvent-free dry electrostatic spray deposition (ESD) and conventional slurry processes were compared to uncover the influence of the manufacturing process on thick LiNi 0.8Mn0.1Co 0.1O 2 (NMC 811) positive electrodes. More pressure during calendering was found necessary for the dry-made (dry) electrodes to have the same porosity, leading to more cracks within the NMC particles and better adhesion. At slower discharge rates, …

Go to article

Automating Selective Area Electron Diffraction Phase Identification Using Machine Learning, Nathaniel Tomczak, Jennifer Carter Feb 2024

Automating Selective Area Electron Diffraction Phase Identification Using Machine Learning, Nathaniel Tomczak, Jennifer Carter

Faculty Scholarship

Selective area electron diffraction (SAED) patterns can provide valuable insight into the structure of a material. However, the manual identification of collected patterns can be a significant bottleneck in the overall phase classification workflow. In this work, we utilize the recent advances in computer vision and machine learning (ML) to automate the indexing of SAED patterns. The performance of six different ML algorithms is demonstrated using metallic plutonium-zirconium alloys. The most successful approach trained a neural network (NN) to make a classification of the phase and zone axis, and then utilized a second NN to synthesize multiple independent predictions of …

Go to article

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha Feb 2024

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha

Dissertations, Theses, and Capstone Projects

Heterogeneity is common in the expression of cancer and treatment response. Precision medicine enables healthcare providers to tailor medical care to an individual's distinct genetic and environmental makeup. This customization has the potential to result in more efficient treatments while minimizing side effects. We believe that by studying the interface of nanotechnology and cancer medicine we can elucidate innovative solutions that address the challenges of disease heterogeneity. This includes advancements in drug delivery, formulations development, and diagnostic sensing. We highlight three studies that use nanotechnology for applications in precision medicine. In Chapter 2, we highlight design optimization of drug formulations …

Go to article

Rational Design Of Peptide-Based Materials Informed By Multiscale Molecular Dynamics Simulations, Dhwanit Rahul Dave Feb 2024

Rational Design Of Peptide-Based Materials Informed By Multiscale Molecular Dynamics Simulations, Dhwanit Rahul Dave

Dissertations, Theses, and Capstone Projects

The challenge of establishing a sustainable and circular economy for materials in medicine and technology necessitates bioinspired design. Nature's intricate machinery, forged through evolution, relies on a finite set of biomolecular building blocks with through-bond and through-space interactions. Repurposing these molecular building blocks requires a seamless integration of computational modeling, design, and experimental validation. The tools and concepts developed in this thesis pioneer new directions in peptide-materials design, grounded in fundamental principles of physical chemistry. We present a synergistic approach that integrates experimental designs and computational methods, specifically molecular dynamics simulations, to gain in-depth molecular insights crucial for advancing the …

Go to article

A 3d Imaging-Based Critique Of Wire Arc Additive Manufacturing (Waam) Simulations, Omar Oraby Jan 2024

A 3d Imaging-Based Critique Of Wire Arc Additive Manufacturing (Waam) Simulations, Omar Oraby

Theses and Dissertations

Residual stresses play a critical role in the mechanical behavior and structural integrity of engineered components. Understanding and quantifying these stresses are essential for ensuring the reliable performance and durability of materials and structures. Traditionally destructive methods are used that involve sample sectioning and material removal. However, non-destructive methods have gained popularity due to their advantages in preserving the specimen's integrity for further testing and material waste reduction. Among these techniques, Digital Image Correlation (DIC) stands out as a powerful non-contact and full-field measurement approach. DIC captures displacements and strain distributions by analyzing the deformation of speckle patterns on the …

Go to article

The Effect Of Mechanical Strain On The Electronic Conductivity Of Α- Fe2o3: A Density Functional Theory Study, Sheriff Naziru Abdulmutalib Jan 2024

The Effect Of Mechanical Strain On The Electronic Conductivity Of Α- Fe2o3: A Density Functional Theory Study, Sheriff Naziru Abdulmutalib

Theses and Dissertations

Hydrogen has emerged as a promising future energy carrier due to its ability to produce zero carbon dioxide (CO2) emissions when burned. However, the limited natural abundance of hydrogen necessitates the development of cost-effective and environmentally friendly methods for large-scale hydrogen production. Among the different hydrogen production approaches, photoelectrochemical water splitting, which employs a photoanode material in a cell using solar energy to split water into hydrogen and oxygen, is the focus of this work. α-Fe2O3 (hematite) is a photoanode material that shows a promising future for hydrogen generation in a photoelectrochemical cells due to its cheapness, availability, and its …

Go to article

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil Jan 2024

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

Go to article

Preparation Of 2d Tungsten Diselenide (Wse2) Thin Films By Selenization Of Dc-Sputtered W Precursors, Lwitiko P. Mwakyusa Jan 2024

Preparation Of 2d Tungsten Diselenide (Wse2) Thin Films By Selenization Of Dc-Sputtered W Precursors, Lwitiko P. Mwakyusa

Tanzania Journal of Science

Two-dimensional layered transition metal dichalcogenides based on WSe2 films demonstrated promising properties for nano-electronics and photovoltaic applications. In this work, WSe2 films were prepared by selenization of DC-sputtered W precursors. The influence of the selenization temperature on the structural, morphology, and optical properties of the WSe2 films was investigated. The selenization temperature was varied from 350 °C to 450 °C at the interval of 50 °C. Structural, morphology and optical properties of the WSe2 were investigated using X-ray diffractometry (XRD), Atomic Force Microscope (AFM), and UV-VIS-NIR spectrophotometer, respectively. XRD analysis revealed that all WSe2 were polycrystalline and exhibited the co-existence …

Go to article

Self-Terminating, Heterogeneous Solid–Electrolyte Interphase Enables Reversible Li–Ether Cointercalation In Graphite Anodes, Dawei Xia, Heonjae Jeong, Dewen Hou, Lei Tao, Tianyi Li, Kristin Knight, Anyang Hu, Ethan P. Kamphaus, Dennis Nordlund, Sami Sainio, Yuzi Liu, John R. Morris, Wenqian Xu, Haibo Huang, Luxi Li, Hui Xiong, Lei Cheng, Feng Lin Jan 2024

Self-Terminating, Heterogeneous Solid–Electrolyte Interphase Enables Reversible Li–Ether Cointercalation In Graphite Anodes, Dawei Xia, Heonjae Jeong, Dewen Hou, Lei Tao, Tianyi Li, Kristin Knight, Anyang Hu, Ethan P. Kamphaus, Dennis Nordlund, Sami Sainio, Yuzi Liu, John R. Morris, Wenqian Xu, Haibo Huang, Luxi Li, Hui Xiong, Lei Cheng, Feng Lin

Materials Science and Engineering Faculty Publications and Presentations

Ether solvents are suitable for formulating solid-electrolyte interphase (SEI)-less ion-solvent cointercalation electrolytes in graphite for Na-ion and K-ion batteries. However, ether-based electrolytes have been historically perceived to cause exfoliation of graphite and cell failure in Li-ion batteries. In this study, we develop strategies to achieve reversible Li–solvent cointercalation in graphite through combining appropriate Li salts and ether solvents. Specifically, we design 1M LiBF4 1,2-dimethoxyethane (G1), which enables natural graphite to deliver ~91% initial Coulombic efficiency and >88% capacity retention after 400 cycles. We captured the spatial distribution of LiF at various length scales and quantified its heterogeneity. The electrolyte …

Go to article

Dielectric Properties Of Polycrystalline And Single Crystal (100) Strontium Titanate From 4 To 295 K, Hung Trinh, Alan Devoe, Fatih Dogan Jan 2024

Dielectric Properties Of Polycrystalline And Single Crystal (100) Strontium Titanate From 4 To 295 K, Hung Trinh, Alan Devoe, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The dielectric properties of single crystal and polycrystalline SrTiO3 (ST) were investigated from 295 to 4 K. Relative permittivity (εr) and loss tangent (tan(δ)) were measured systematically as a function of direct current (DC) voltage (0 V/cm to 800 V/cm), frequency (100 Hz to 1 MHz), and temperature (295 K to 4 K) for type (100) single crystal SrTiO3 (SC-ST) and for polycrystalline SrTiO3 (PC-ST). Calculated equivalent series resistance (ESR) data are also reported. Overall, the permittivity of ST showed a dependence on temperature, DC voltage, and frequency. Dependences on voltage and frequency were only observed at …

Go to article

Rational Design Of Heterostructured Nanomaterials For Accelerating Electrocatalytic Hydrogen Evolution Reaction Kinetics In Alkaline Media, Hai-Bin Ma, Xiao-Yan Zhou, Jia-Yi Li, Hong-Fei Cheng, Ji-Wei Ma Jan 2024

Rational Design Of Heterostructured Nanomaterials For Accelerating Electrocatalytic Hydrogen Evolution Reaction Kinetics In Alkaline Media, Hai-Bin Ma, Xiao-Yan Zhou, Jia-Yi Li, Hong-Fei Cheng, Ji-Wei Ma

Journal of Electrochemistry

Owing to the merits of high energy density, as well as clean and sustainable properties, hydrogen has been deemed to be a prominent alternative energy to traditional fossil fuels. Electrocatalytic hydrogen evolution reaction (HER) has been considered to be mostly promising for achieving green hydrogen production, and has been widely studied in acidic and alkaline solutions. In particular, HER in alkaline media has high potential to achieve large-scale hydrogen production because of the increased durability of electrode materials. However, for the currently most prominent catalyst Pt, its HER kinetics in an alkaline solution is generally 2–3 orders lower than that …

Go to article

Stability Of A Solid Oxide Cell Stack Under Direct Internal-Reforming Of Hydrogen-Blended Methane, Ya-Fei Tang, An-Qi Wu, Bei-Bei Han, Hua Liu, Shan-Jun Bao, Wang-Lin Lin, Ming Chen, Wan-Bing Guan, Subhash C. Singhal Jan 2024

Stability Of A Solid Oxide Cell Stack Under Direct Internal-Reforming Of Hydrogen-Blended Methane, Ya-Fei Tang, An-Qi Wu, Bei-Bei Han, Hua Liu, Shan-Jun Bao, Wang-Lin Lin, Ming Chen, Wan-Bing Guan, Subhash C. Singhal

Journal of Electrochemistry

In this work, the long-term stability and degradation mechanism of a direct internal-reforming solid oxide fuel cell stack (IR-SOFC stack) using hydrogen-blended methane steam reforming were investigated. An overall degradation rate of 2.3%·kh–1 was found after the stack was operated for 3000 hours, indicating a good long-term stability. However, the voltages of the two cells in the stack were increased at the rates of 3.38 mV·kh–1 and 3.78 mV·kh–1, while the area specific resistances of the three metal interconnects in the stack were increased to 0.276 Ω·cm2, 0.254 Ω·cm2 and 0.249 Ω·cm2 …

Go to article

Surface Modification Of Poly(4,4'-Oxydiphenilene Pyromellitimide) With Low-Pressure Plasma Treatment, Cihan Aktas Jan 2024

Surface Modification Of Poly(4,4'-Oxydiphenilene Pyromellitimide) With Low-Pressure Plasma Treatment, Cihan Aktas

USF Tampa Graduate Theses and Dissertations

This study explores the change of the wetting characteristics of commercially availablepolyimide (PI), Kapton® HN, films a type of poly(4,4′-oxydiphenylene-pyromellitimide), following treatment with low-pressure plasmas of carbon tetrafluoride (CF4), air, hydrogen (H2), carbon-dioxide (CO2) and oxygen (O2) gases as well as the surface texturing via laser-exposure procedure. The water contact angle (CA) and surface free energy (SFE) of untreated PI films were determined as 82.4°±0.8 and 45.0±0.3 mN/m, respectively. After CF4 plasma gas treatment, the CA value of PI films increased to 110.2°±1.0, while it decreased to 9.3°±2.3 after O2 plasma gas treatment. The surface free energy (SFE) of PI …

Go to article

Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander Jan 2024

Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander

School of Design and Engineering Papers

The pursuit of an environmentally sustainable manufacturing process requires the substitution of less damaging and recyclable solutions for harmful reagents. This study aims to assess the effectiveness of using cellulose microfibrils synthesized via different hydrolysis reactions as reinforcing agents in polyvinyl alcohol (PVA) at varying concentrations. The investigation explores the morphology, thermal properties, and chemical behavior of the cellulose particles. The cellulose microfibrils (CMFs) produced using citric acid exhibited the highest yield and aspect ratio. Notably, particles from organic acids demonstrated greater thermal stability, with oxalic acid-derived particles displaying the maximum thermal degradation temperature. Subsequently, cast films of PVA reinforced …

Go to article

Research On Orthogonal Test Of Mgo-Fiber Cement Soil′S Deformation Modulus, Hu Qizhi, Yu Yang, Ma Qiang, Zhuang Xinshan Jan 2024

Research On Orthogonal Test Of Mgo-Fiber Cement Soil′S Deformation Modulus, Hu Qizhi, Yu Yang, Ma Qiang, Zhuang Xinshan

Journal of China & Foreign Highway

Appropriate amounts of MgO and fiber can improve the compressive strength of cement soil. In order to further study the mechanical properties of MGO-fiber cement soil, Minitab software was used to design an orthogonal test method, and sensitivity analysis and influence analysis were carried out. The change rules of deformation modulus of MgO content, fiber content, and fiber length were studied at three different levels. The regression equations of MgO content, fiber content, and fiber length with cement soil deformation modulus were obtained by using Matlab software to process the test data. The sample was tested by scanning electron microscope …

Go to article

First Prev Next Last