Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2022

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 91 - 120 of 918

Full-Text Articles in Materials Science and Engineering

Adiabatic Shear Banding In Nickel And Nickel-Based Superalloys: A Review, Russell A. Rowe, Paul G. Allison, Anthony N. Palazotto, Keivan Davami Nov 2022

Adiabatic Shear Banding In Nickel And Nickel-Based Superalloys: A Review, Russell A. Rowe, Paul G. Allison, Anthony N. Palazotto, Keivan Davami

Faculty Publications

This review paper discusses the formation and propagation of adiabatic shear bands in nickel-based superalloys. The formation of adiabatic shear bands (ASBs) is a unique dynamic phenomenon that typically precedes catastrophic, unpredicted failure in many metals under impact or ballistic loading. ASBs are thin regions that undergo substantial plastic shear strain and material softening due to the thermo-mechanical instability induced by the competitive work hardening and thermal softening processes. Dynamic recrystallization of the material’s microstructure in the shear region can occur and encourages shear localization and the formation of ASBs. Phase transformations are also often seen in ASBs of ferrous …

Go to article

Experimental Evidence That Shear Bands In Metallic Glasses Nucleate Like Cracks, Alan A. Long, Wendelin Wright, Xiaojun Gu, Anna Thackray, Mayisha Nakib, Jonathan T. Uhl, Karin A. Dahmen Nov 2022

Experimental Evidence That Shear Bands In Metallic Glasses Nucleate Like Cracks, Alan A. Long, Wendelin Wright, Xiaojun Gu, Anna Thackray, Mayisha Nakib, Jonathan T. Uhl, Karin A. Dahmen

Faculty Journal Articles

Highly time-resolved mechanical measurements, modeling, and simulations show that large shear bands in bulk metallic glasses nucleate in a manner similar to cracks. When small slips reach a nucleation size, the dynamics changes and the shear band rapidly grows to span the entire sample. Smaller nucleation sizes imply lower ductility. Ductility can be increased by increasing the nucleation size relative to the maximum (“cutoff”) shear band size at the upper edge of the power law scaling range of their size distribution. This can be achieved in three ways: (1) by increasing the nucleation size beyond this cutoff size of the …

Go to article

Sculpting Charge In Graphene Through Patterned Strain, Dylan J. Balter, Jenna Smith Nov 2022

Sculpting Charge In Graphene Through Patterned Strain, Dylan J. Balter, Jenna Smith

The Journal of Purdue Undergraduate Research

No abstract provided.

Go to article

Processing Of Plastic Film From Potato Starch: Effect Of Drying Methods, Kourtney Collier, Samantha Goins, Austin Chirgwin, Isabelle Stanfield Nov 2022

Processing Of Plastic Film From Potato Starch: Effect Of Drying Methods, Kourtney Collier, Samantha Goins, Austin Chirgwin, Isabelle Stanfield

The Journal of Purdue Undergraduate Research

Starch-based plastics are biodegradable, compostable compounds made of starch and plasticizers from natural sources. Their fabrication involves the starch-plasticizer reaction at 70–100°C followed by cooling and drying. Th e most common drying method is air drying (natural convection), which is effective but slow. Th e objective of this work is to study the effect of fast drying (forced convection) on the quality of the plastic film. Th is work compares the effects of drying conditions and drying rate on warpage, shrinkage rate, and presence of bubbles. Five drying methods are studied: (1) natural convection with uncovered petri dish, (2) natural …

Go to article

Optimizing Switching Of Non-Linear Properties With Hyperbolic Metamaterials, James A. Ethridge, John G. Jones, Manuel R. Ferdinandus, Michael J. Havrilla, Michael A. Marciniak Nov 2022

Optimizing Switching Of Non-Linear Properties With Hyperbolic Metamaterials, James A. Ethridge, John G. Jones, Manuel R. Ferdinandus, Michael J. Havrilla, Michael A. Marciniak

Faculty Publications

Hyperbolic metamaterials have been demonstrated to have special potential in their linear response, but the extent of their non-linear response has not been extensively modeled or measured. In this work, novel non-linear behavior of an ITO/SiO2 layered hyperbolic metamaterial is modeled and experimentally confirmed, specifically a change in the sign of the non-linear absorption with intensity. This behavior is tunable and can be achieved with a simple one-dimensional layered design. Fabrication was performed with physical vapor deposition, and measurements were conducted using the Z-scan technique. Potential applications include tunable optical switches, optical limiters, and tunable components of laser sources.

Go to article

Fabrication Of Thin-Film Composite, Reverse-Osmosis Membranes With Polyethylenimine Modifications For Enhancing Membrane Fouling Resistance, Stephanie N. Hamilton Nov 2022

Fabrication Of Thin-Film Composite, Reverse-Osmosis Membranes With Polyethylenimine Modifications For Enhancing Membrane Fouling Resistance, Stephanie N. Hamilton

Master's Theses

Increasing water reuse opportunities for communities has become increasingly important as access to clean water is becoming more scarce. Reverse Osmosis (RO) is an advanced treatment technology used in water recycling wastewater for potable reuse applications. RO is a promising technology; however, the membranes have limitations including their high energy demand and their susceptibility to membrane fouling. The main objective of this study was to develop a reproducible method for the fabrication of RO membranes with enhanced flux and reduced susceptibility to fouling. Literature contains numerous publications on fabrication of thin film composite (TFC) RO membranes with high performance. However, …

Go to article

Synthesis Of A Phosphorus-Based Epoxy Reactive Flame Retardant Analog To Diglycidyl Ether Of Bisphenol A (Dgeba) And Its Behavior As A Matrix In A Carbon Fiber Composite, Mustafa Mukhtar Nov 2022

Synthesis Of A Phosphorus-Based Epoxy Reactive Flame Retardant Analog To Diglycidyl Ether Of Bisphenol A (Dgeba) And Its Behavior As A Matrix In A Carbon Fiber Composite, Mustafa Mukhtar

Chemical and Materials Engineering Faculty Publications

This paper describes the synthesis of a phosphorus-based flame retardant that is a chemical analog of diglycidyl ether of bisphenol A (DGEBA), as well as its incorporation as a matrix into carbon fiber laminates. Carbon fiber composites, if used for structural applications in mass transport vehicles (aircraft, trains), will require some aspects of improved fire performance to be used safely in those applications. The first phase of work involved the development of two separate synthesis routes to produce the flame retardant monomer, referred to as Phosphorus-DGEBA or simply P-DGEBA. The second step was to determine the viability of the compound's …

Go to article

Comparing Structure-Property Evolution For Pm-Hip And Forged Alloy 625 Irradiated With Neutrons To 1 Dpa, Caleb Clement, Sowmya Panuganti, Patrick H. Warren, Yangyang Zhao, Yu Lu, Katelyn Wheeler, David Frazer, Donna P. Guillen, David W. Gandy, Janelle P. Wharry Nov 2022

Comparing Structure-Property Evolution For Pm-Hip And Forged Alloy 625 Irradiated With Neutrons To 1 Dpa, Caleb Clement, Sowmya Panuganti, Patrick H. Warren, Yangyang Zhao, Yu Lu, Katelyn Wheeler, David Frazer, Donna P. Guillen, David W. Gandy, Janelle P. Wharry

Materials Science and Engineering Faculty Publications and Presentations

The nuclear power industry has growing interest in qualifying powder metallurgy with hot isostatic pressing (PM-HIP) to replace traditional alloy fabrication methods for reactor structural components. But there is little known about the response of PM-HIP alloys to reactor conditions. This study directly compares the response of PM-HIP to forged Ni-base Alloy 625 under neutron irradiation doses ∼0.5–1 displacements per atom (dpa) at temperatures ranging ∼321–385 °C. Post-irradiation examination involves microstructure characterization, ASTM E8 uniaxial tensile testing, and fractography. Up through 1 dpa, PM-HIP Alloy 625 appears more resistant to irradiation-induced cavity nucleation than its forged counterpart, and consequently experiences …

Go to article

Magnetism In Doped And Hybrid Two – Dimensional Transition Metal Dichalcogenides, Nalaka Kapuruge Nov 2022

Magnetism In Doped And Hybrid Two – Dimensional Transition Metal Dichalcogenides, Nalaka Kapuruge

USF Tampa Graduate Theses and Dissertations

In recent years, spintronics has gained increasing interest due to the possibility of storing and processing information through the manipulation of both the charge and spin of an electron. Dilute magnetic semiconductors are ideal for the fabrication of such devices as they display carrier-mediated ferromagnetism which allows the electronic control of magnetism. Transferring these properties into the two-dimensional (2D) realm is very attractive for both fundamental research and novel applications. The recent discovery of long-range magnetic order in 2D materials has attracted a growing effort in the search for new functional 2D materials that can display ferromagnetic properties at room-temperature. …

Go to article

Electrochemical Syntheses Of Nanomaterials And Small Molecules For Electrolytic Hydrogen Production, Jia-Qi Wei, Xiao-Dong Chen, Shu-Zhou Li Oct 2022

Electrochemical Syntheses Of Nanomaterials And Small Molecules For Electrolytic Hydrogen Production, Jia-Qi Wei, Xiao-Dong Chen, Shu-Zhou Li

Journal of Electrochemistry

Hydrogen is a clean, efficient, renewable energy resource and the most promising alternative to fossil fuels for future carbon-neutral energy supply. Therefore, sustainable hydrogen production is highly attractive and urgently demanded, especially via water electrolysis that has clean, abundant precursors and zero emission. However, current water electrolysis is hindered by the sluggish kinetics and low cost/energy efficiency of both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this regard, electrochemical synthesis offers prospects to raise the efficiency and benefit of water electrolysis by fabricating advanced electrocatalysts and providing more efficient/value-adding co-electrolysis alternatives. It is an eco-friendly and facile …

Go to article

Alkaline Water Electrolysis For Efficient Hydrogen Production, Wen-Fu Xie, Ming-Fei Shao Oct 2022

Alkaline Water Electrolysis For Efficient Hydrogen Production, Wen-Fu Xie, Ming-Fei Shao

Journal of Electrochemistry

Hydrogen production from water electrolysis is a sustainable and environmentally benign strategy in comparison with fossil fuel-based hydrogen. However, this promising technique suffers from the high energy consumption and unsatisfactory cost due to the sluggish kinetics of both half reaction and inferior stability of electrocatalysts. To address this challenge, herein, we present a timely and comprehensive review on advances in alkaline water electrolysis that is already commercialized for large scale hydrogen production. The design principles and strategies with aiming to promote the performance of hydrogen generation are discussed from the view of electrocatalyst, electrode, reaction and system. The challenges and …

Go to article

Alkaline Seawater Electrolysis At Industrial Level:Recent Progress And Perspective, Tao Zhang, Yi-Pu Liu, Qi-Tong Ye, Hong-Jin Fan Oct 2022

Alkaline Seawater Electrolysis At Industrial Level:Recent Progress And Perspective, Tao Zhang, Yi-Pu Liu, Qi-Tong Ye, Hong-Jin Fan

Journal of Electrochemistry

Industrial hydrogen generation through water splitting, powered by renewable energy such as solar, wind and marine, paves a potential way for energy and environment sustainability. However, state-of-the-art electrolysis using high purity water as hydrogen source at an industrial level would bring about crisis of freshwater resource. Seawater splitting provides a practical path to solve potable water shortage, but still faces great challenges for large-scale industrial operation. Here we summarize recent developments in seawater splitting, covering general mechanisms, design criteria for electrodes, and industrial electrolyzer for direct seawater splitting. Multi-objective optimization methods to address the key challenges of active sites, reaction …

Go to article

A Self-Supported Ru-Cu3P Catalyst Toward Alkaline Hydrogen Evolution, Zi-Xuan Wan, Chao-Hui Wang, Xiong-Wu Kang Oct 2022

A Self-Supported Ru-Cu3P Catalyst Toward Alkaline Hydrogen Evolution, Zi-Xuan Wan, Chao-Hui Wang, Xiong-Wu Kang

Journal of Electrochemistry

Transition metal phosphide (TMP) is a kind of effective catalysts toward hydrogen evolution reaction (HER) in alkaline electrolytes. However, the performance of TMP catalysts is strongly limited by water splitting. In this work, we developed a method to prepare a copper foam (CF) supported Ru-doped Cu3P catalyst (Ru-Cu3P/CF) by a consecutive growth of Cu(OH)2 nanoarrays, soaking in RuCl3 solution and phosphorization. A large surface area was obtained by the self-supported catalysts with the appropriative Ru doping. As an excellent HER catalyst, it exhibited a low overpotential of 95.6 mV at a current density of …

Go to article

Catalytic Effect Of Disordered Ru-O Configurations For Electrochemical Hydrogen Evolution, Xue Sun, Ya-Jie Song, Ren-Long Li, Jia-Jun Wang Oct 2022

Catalytic Effect Of Disordered Ru-O Configurations For Electrochemical Hydrogen Evolution, Xue Sun, Ya-Jie Song, Ren-Long Li, Jia-Jun Wang

Journal of Electrochemistry

Phase engineering is considered as an effective method for modulating the electronic structure and catalytic activity of catalysts. The disordered conformation of amorphous materials allows flexible reforming of the surface electronic structure, showing their attractiveness as catalysts for hydrogen evolution reaction (HER). Herein, we designed and developed an amorphous ruthenium dioxide (a-RuO2) catalyst with a disordered Ru-O configuration. The conformational relationship between Ru-O ordering and HER performance is established by combining advanced electron microscopic techniques with detailed electrochemical tests. Specifically, the disordered Ru-O coordination significantly enhanced the HER catalytic activity in both acidic and alkaline media, ultimately leading …

Go to article

Perturbative Theoretical Model Of Electronic Transient Circular Dichroism Spectroscopy Of Molecular Aggregates, Paul C. Arpin, Daniel B. Turner Oct 2022

Perturbative Theoretical Model Of Electronic Transient Circular Dichroism Spectroscopy Of Molecular Aggregates, Paul C. Arpin, Daniel B. Turner

Materials Science and Engineering Faculty Publications and Presentations

A chiral analog of transient absorption spectroscopy, transient circular dichroism (TCD) spectroscopy is an emerging time-resolved method. Both spectroscopic methods can probe the electronic transitions of a sample, and TCD is additionally sensitive to the dynamic aspects of chirality, such as those induced by molecular excitons. Here, we develop a theoretical description of TCD for electronic multi-level models in which the pump pulse is linearly polarized and probe pulse is alternately left- and right-circularly polarized. We derive effective response functions analogous to those often used to describe other four-wave mixing methods and then simulate and analyze TCD spectra for three …

Go to article

Feasibility Assessment Of Warm Mix Asphalt In Arkansas, Mohammad Najmush Sakib Oyan Oct 2022

Feasibility Assessment Of Warm Mix Asphalt In Arkansas, Mohammad Najmush Sakib Oyan

Student Theses and Dissertations

The future of Warm Mix Asphalt (WMA) technologies is promising in the U.S. However, the Arkansas Department of Transportation (ARDOT) does not have any specific guidelines to implement them in the field. This research aims to provide necessary baseline data for WMA as a proof of concept. In this study, three ARDOT approved Performance Grade (PG) binders namely PG 64-22, PG 70-22, and PG 76-22 were investigated. Each of these binders was obtained from two different sources. They were modified by varying doses of four selected additives: Sasobit®, Advera®, Evotherm®, and Rediset®. Additionally, four different types of aggregates (sandstone, limestone, …

Go to article

Local Structure In High-Entropy Transition Metal Diborides, Mattia Gaboardi, Frederic Monteverde, Federico Saraga, Giuliana Aquilanti, Lun Feng, William Fahrenholtz, Gregory Hilmas Oct 2022

Local Structure In High-Entropy Transition Metal Diborides, Mattia Gaboardi, Frederic Monteverde, Federico Saraga, Giuliana Aquilanti, Lun Feng, William Fahrenholtz, Gregory Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Studies on high-entropy materials often speculate about the effects of lattice distortion and disorder on characteristics such as hardness, thermal expansion, and electronic properties. Notwithstanding the ongoing race to discover new compositions, investigations of the local structure at the atomic level remain sparse at best. Additionally, assessments of the homogeneity of the distribution of metals within the lattice sites are often restricted to techniques such as energy dispersive spectroscopy which might lead to an inaccurate picture of the bulk material. Herein, we report an extensive and systematic study of a class of emerging high-entropy ceramics that uses a combination of …

Go to article

Tunable Electronic Structure Via Dna-Templated Heteroaggregates Of Two Distinct Cyanine Dyes, Jonathan S. Huff, Matthew S. Barclay, Azhad U. Chowdhury, Lance K. Patten, Simon K. Roy, Aaron Sup, Austin Biaggne, Lan Li, Jeunghoon Lee, Paul H. Davis, Bernard Yurke, William B. Knowlton, Daniel B. Turner, Ryan D. Pensack Oct 2022

Tunable Electronic Structure Via Dna-Templated Heteroaggregates Of Two Distinct Cyanine Dyes, Jonathan S. Huff, Matthew S. Barclay, Azhad U. Chowdhury, Lance K. Patten, Simon K. Roy, Aaron Sup, Austin Biaggne, Lan Li, Jeunghoon Lee, Paul H. Davis, Bernard Yurke, William B. Knowlton, Daniel B. Turner, Ryan D. Pensack

Materials Science and Engineering Faculty Publications and Presentations

Molecular excitons are useful for applications in light harvesting, organic optoelectronics, and nanoscale computing. Electronic energy transfer (EET) is a process central to the function of devices based on molecular excitons. Achieving EET with a high quantum efficiency is a common obstacle to excitonic devices, often owing to the lack of donor and acceptor molecules that exhibit favorable spectral overlap. EET quantum efficiencies may be substantially improved through the use of heteroaggregates─aggregates of chemically distinct dyes─rather than individual dyes as energy relay units. However, controlling the assembly of heteroaggregates remains a significant challenge. Here, we use DNA Holliday junctions to …

Go to article

Fluoride Technology For Processing Copper Production Slag At Almalyk Mmc And The Possibility Of Its Application For The Synthesis Of Highly Dispersed Silica Dioxide, M Sh Kurbanov, U M. Nuraliev, J A. Panjiev, S A. Tulaganov, M Ernazarov, L S. Andriyko Oct 2022

Fluoride Technology For Processing Copper Production Slag At Almalyk Mmc And The Possibility Of Its Application For The Synthesis Of Highly Dispersed Silica Dioxide, M Sh Kurbanov, U M. Nuraliev, J A. Panjiev, S A. Tulaganov, M Ernazarov, L S. Andriyko

Technical science and innovation

A new pilot-plant equipment of an inclined rotary furnace for the processing of fluoroammonium silicon-containing materials has been developed and manufactured, which allowed sublimation of ammonium hexafluorosilicate, formed as a result of fluorination of processed raw materials, in two sections, with autonomous control of temperature and movement of raw materials. It is shown that the use of the created equipment for the processing of copper-smelting slags of the Almalyk MMC using fluoride technology makes it possible to separate amorphous silicon dioxide in the form of a dispersed powder from slags, extract iron and obtain a collective concentrate of precious, non-ferrous …

Go to article

Selective Reduction Of Trivalent Iron In Zinc Ferrite Using Elemental Sulphur, B T. Berdiyarov, Sh T. Khojiev, J B. Ismailov, S T. Matkarimov, Sh O. Ismatov Oct 2022

Selective Reduction Of Trivalent Iron In Zinc Ferrite Using Elemental Sulphur, B T. Berdiyarov, Sh T. Khojiev, J B. Ismailov, S T. Matkarimov, Sh O. Ismatov

Technical science and innovation

In this article, the process laws and technological aspects of the process of sintering the zinc-containing waste of a zinc plant with technical sulfur are considered. Zinc cake is obtained during the sulfuric acid leaching of calcined zinc ores and contains about 20% zinc and additional metals such as indium, cadmium, lead and copper. Copper cakes are somewhat difficult to work with because they contain ferrites and silicates belonging to acid-resistant spinels. Since the chemical and mineralogical composition of zinc production cakes consists of complex oxides, finding ways to process them is one of the actual topics of zinc metallurgy. …

Go to article

Features Designing Special Clothing For The Hot Climate Of Uzbekistan, N Kh Mirtalipova, N A. Isaxujayeva Oct 2022

Features Designing Special Clothing For The Hot Climate Of Uzbekistan, N Kh Mirtalipova, N A. Isaxujayeva

Technical science and innovation

This paper considers the issues of establishing the relationship between the properties of fabric, clothing design and the comfort of clothing; communication of the size of the human body, allowance for free fitting, modern design when developing the design of clothing; connection of the allowance for free fitting with a suitable air gap. A diagram is given that characterizes the dependence of the comfort of clothing on its design and properties of fabrics. A mathematical model of the processes of air exchange in the underwear space is considered, which will allow obtaining more complete information and establishing more stringent dependences …

Go to article

Molecular Dynamics Simulations Of Cyanine Dimers Attached To Dna Holliday Junctions, Austin Biaggne, Young C. Kim, Joseph S. Melinger, William B. Knowlton, Bernard Yurke, Lan Li Oct 2022

Molecular Dynamics Simulations Of Cyanine Dimers Attached To Dna Holliday Junctions, Austin Biaggne, Young C. Kim, Joseph S. Melinger, William B. Knowlton, Bernard Yurke, Lan Li

Materials Science and Engineering Faculty Publications and Presentations

Dye aggregates and their excitonic properties are of interest for their applications to organic photovoltaics, non-linear optics, and quantum information systems. DNA scaffolding has been shown to be effective at promoting the aggregation of dyes in a controllable manner. Specifically, isolated DNA Holliday junctions have been used to achieve strongly coupled cyanine dye dimers. However, the structural properties of the dimers and the DNA, as well as the role of Holliday junction isomerization are not fully understood. To study the dynamics of cyanine dimers in DNA, molecular dynamics simulations were carried out for adjacent and transverse dimers attached to Holliday …

Go to article

Carbonate-Superstructured Solid Fuel Cells With Hydrocarbon Fuels, Hanrui Su, Wei Zhang, Yun Hang Hu Oct 2022

Carbonate-Superstructured Solid Fuel Cells With Hydrocarbon Fuels, Hanrui Su, Wei Zhang, Yun Hang Hu

Michigan Tech Publications, Part 1

A basic requirement for solid oxide fuel cells (SOFCs) is the sintering of electrolyte into a dense impermeable membrane to prevent the mixing of fuel and oxygen for a sufficiently high open-circuit voltage (OCV). However, herein, we demonstrate a different type of fuel cell, a carbonate-superstructured solid fuel cell (CSSFC), in which in situ generation of superstructured carbonate in the porous samarium-doped ceria layer creates a unique electrolyte with ultrahigh ionic conductivity of 0.17 S.cm21 at 550 °C. The CSSFC achieves unprecedented high OCVs (1.051 V at 500 °C and 1.041 V at 550 °C) with methane fuel. Furthermore, the …

Go to article

Design And Development Of A Multi-Material, Cost-Competitive, Lightweight Mid-Size Sports Utility Vehicle’S Body-In-White, Amit M. Deshpande, Rushabh Rajesh Sadiwala, Nathan Brown, Sai Aditya Pradeep, Leon M. Headings, Ningxiner Zhao, Brad Losey, Ryan Hahnlen, Marcelo J. Dapino, Gang Li, Srikanth Pilla Oct 2022

Design And Development Of A Multi-Material, Cost-Competitive, Lightweight Mid-Size Sports Utility Vehicle’S Body-In-White, Amit M. Deshpande, Rushabh Rajesh Sadiwala, Nathan Brown, Sai Aditya Pradeep, Leon M. Headings, Ningxiner Zhao, Brad Losey, Ryan Hahnlen, Marcelo J. Dapino, Gang Li, Srikanth Pilla

Publications

Vehicle light-weighting has allowed automotive original equipment manufacturers (OEMs) to improve fuel efficiency, incorporate value-adding features without a weight penalty, and extract better performance. The typical body-in-white (BiW) accounts for up to 40% of the total vehicle mass, making it the focus of light-weighting efforts through a) conceptual redesign b) design optimization using state-of-the-art computer-aided engineering (CAE) tools, and c) use of advanced high strength steels (AHSS), aluminum, magnesium, and/or fiber-reinforced plastic (FRP) composites. However, most of these light-weighting efforts have been focused on luxury/sports vehicles, with a relatively high price range and an average production of 100,000 units/year or …

Go to article

Impulse, Fall 2022, University Marketing And Communications, Jerome J. Lohr College Of Engineering Oct 2022

Impulse, Fall 2022, University Marketing And Communications, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Sanjeev Kumar Takes Helm as College’s 12th Dean
5 | College Develops Partnerships in India, Turkey
6 | Faculty News
8 | Aerofly — Profs, Alum Partner To Build Unique Drone
10 | Researchers Find Way to Extend Produce Shelf Life
12 | SDSU Claims National Title in Quarter-Scale Tractors
14 | Nation’s Top ASCE Chapter Housed at SDSU
16 | National Geo-Video Title Won By State Students
18 | Summer Brings Engineering Camps to Campus
20 | Haleigh Timmer — Money on the Court, In Classroom
22 | Daniel Burkhalter — Day in the Life of Student-Athlete …

Go to article

Oxygen Vacancies In Lib3O5 Crystals And Their Role In Nonlinear Absorption, Brian C. Holloway, Christopher A. Lenyk, Timothy D. Gustafson, Nancy C. Giles Oct 2022

Oxygen Vacancies In Lib3O5 Crystals And Their Role In Nonlinear Absorption, Brian C. Holloway, Christopher A. Lenyk, Timothy D. Gustafson, Nancy C. Giles

Faculty Publications

LiB3O5 (LBO) crystals are used to generate the second, third, and fourth harmonics of near-infrared solid-state lasers. At high power levels, the material’s performance is adversely affected by nonlinear absorption. We show that as-grown crystals contain oxygen and lithium vacancies. Transient absorption bands are formed when these intrinsic defects serve as traps for “free” electrons and holes created by x rays or by three- and four-photon absorption processes. Trapped electrons introduce a band near 300 nm and trapped holes produce bands in the 500-600 nm region. Electron paramagnetic resonance (EPR) is used to identify and characterize the …

Go to article

Effect Of Cu Additions On Scale Structure And Descaling Efficiency Of Low C Steel Reheated In A Combustion Gas Atmosphere, Richard Osei, Simon Lekakh, Ronald J. O'Malley Oct 2022

Effect Of Cu Additions On Scale Structure And Descaling Efficiency Of Low C Steel Reheated In A Combustion Gas Atmosphere, Richard Osei, Simon Lekakh, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Modern EAF steelmaking employs scrap as its primary source of raw material. Different sources of scrap have varying levels of residuals, which can negatively influence product properties, performance, and surface quality. The presence of some residuals, such as Cu and Ni in controlled quantities, can also positively impact steel performance for some applications. It is also well known that interactions between residuals and alloying elements in steel can modify the structure of scale formed during slab reheating prior to hot rolling. These changes in the scale structure can influence scale removability. In this study, the effect of varying Cu concentrations …

Go to article

Fusion Welding Of Refractory Metals And Zrb2-Sic-Zrc Ceramics, Jecee D. Jarman, William Fahrenholtz, Greg Hilmas, Jeremy Lee Watts, Tieshu Huang Oct 2022

Fusion Welding Of Refractory Metals And Zrb2-Sic-Zrc Ceramics, Jecee D. Jarman, William Fahrenholtz, Greg Hilmas, Jeremy Lee Watts, Tieshu Huang

Materials Science and Engineering Faculty Research & Creative Works

Molybdenum and a molybdenum alloy were fusion welded to ZrB2-based ceramics to determine if the electrical and thermal properties of the metals and ceramics affected their weldability. Commercial ceramic powders were hot pressed, machined into coupons, and preheated to 1600 °C before joining the ceramics to commercial metals using plasma arc welding. Weldability varied as indicated by the range of porosity observed within the fusion zones. Measured thermal and electrical properties appeared to have little to no effect on the weldability of metal-ceramic welds despite the large range of values measured across each property. Differences in melting temperatures between metal …

Go to article

Stochastic Model For High Temperature Oxidation Of Cr–Ni Austenitic Steels Assisted By Spallation, Simon N. Lekakh, Oleg Neroslavsky, Mei Li, Larry Godlevski Oct 2022

Stochastic Model For High Temperature Oxidation Of Cr–Ni Austenitic Steels Assisted By Spallation, Simon N. Lekakh, Oleg Neroslavsky, Mei Li, Larry Godlevski

Materials Science and Engineering Faculty Research & Creative Works

Cr–Ni austenitic steels offer significant high temperature corrosion protection by forming a surface oxide layer. However, above critical service conditions (temperature, atmosphere, thermal cycling), oxidized surface can experience intensive degradation because of scale spallation, which could be detrimental to the in-service life. To predict the effect of scale spallation on oxidation kinetics, a simulation was implemented using a stochastic model. The model considers topological parameters and intensity of spallation which can occur, while delivering a true oxidation constant. The experimental procedure identified the amount of formed spalled scale and topology of spallation based on the use of element mapping of …

Go to article

Hanford Low-Activity Waste Glass Composition-Temperature-Melt Viscosity Relationships, Alejandro Heredia-Langner, Vivianaluxa Gervasio, Scott K. Cooley, Charmayne E. Lonergan, Dong Sang Kim, Albert A. Kruger, John D. Vienna Oct 2022

Hanford Low-Activity Waste Glass Composition-Temperature-Melt Viscosity Relationships, Alejandro Heredia-Langner, Vivianaluxa Gervasio, Scott K. Cooley, Charmayne E. Lonergan, Dong Sang Kim, Albert A. Kruger, John D. Vienna

Materials Science and Engineering Faculty Research & Creative Works

This study developed a model for predicting viscosity of alkali-alumino-borosilicate glass melts as functions of composition and temperature. The model is based on a total of 3935 viscosity-temperature data from 574 glasses with viscosity values ranging from 2.53 to 7260 Poise (P) in the temperature range of 900–1260°C. Several different model forms were surveyed, including those based on Arrhenius, Vogel-Fulcher-Tammann, Avramov-Milchev, and Mauro-Yue-Ellison-Gupta-Allen. For each of these models, combinations of the temperature-independent parameters were fitted to composition. It was found that generally fitting more than one temperature-independent parameter as functions of composition resulted in overfitting. The Avramov-Milchev-based model was found …

Go to article

First Prev Next Last