Materials Science and Engineering Commons^™

Effect Of Micro-Structural Dispersity Of Simo Ductile Iron On High Temperature Performance During Static Oxidation, Simon N. Lekakh, Asebi Bofah, Larry A. Godlewski, Mei Li

Materials Science and Engineering Faculty Research & Creative Works

High silicon and molybdenum (SiMo) ductile iron is commonly used for car exhaust systems, and its micro-structural dispersity depends on intrinsic parameters, which include alloy composition and inoculation efficiency, as well as extrinsic factors, such as casting wall thickness and molding material, which define cooling rate during solidification. Micro-structural dispersity is referred to as the degree of heterogeneity of sizes of structural constituencies within the microstructure. A variation in the micro-structural dispersity could impact the high temperature performance of SiMo ductile iron during static oxidation and transient thermo-mechanical loading conditions. In this study, static high temperature tests were performed on …

Water Based Soil Fluidization Using A Soft Eversion Robot, James E. Hand

Doctoral Dissertations and Master's Theses

Soft robotics, a form of robotics that incorporates nonrigid components, continues to grow in scope, system design, and application. A recent addition to this field is the Vine Robot platform, a bio-inspired robot designed by Stanford University in 2017. Its method of movement, known as eversion, closely resembles the way that a vine grows along a tree, giving it its name. The focus of this research was to take its proven abilities of underwater vine-like movement and soil fluidization, a process where granular materials are converted from a solid-like state to a fluid-like state, to create an underwater eversion robot …

Rapid Removal Of Pfoa And Pfos Via Modified Industrial Solid Waste: Mechanisms And Influences Of Water Matrices, Hongyi Wan, Rollie Mills, Kai Qu, James C. Hower, M. Abdul Mottaleb, Dibakar Bhattacharyya, Zhi Xu

Chemical and Materials Engineering Faculty Publications

Emerging perfluoroalkyl and polyfluoroalkyl substances contaminate waters at trace concentrations, thus rapid and selective adsorbents are pivotal to mitigate the consequent energy-intensive and time-consuming issues in remediation. In this study, coal combustion residuals-fly ash was modified (FA-SCA) to overcome the universal trade-off between high adsorption capacity and fast kinetics. FA-SCA presented rapid adsorption (teq = 2 min) of PFOX (perfluorooctanoic acid and perfluorooctanesulfonic acid, collectively), where the dynamic adsorption capacity (qdyn = qm/teq) was 2–3 orders of magnitude higher than that of benchmark activated carbons and anion-exchange resins. Investigated by advanced characterization and kinetic models, the fast kinetics and superior …

The Tin Man Needs A Heart: A Proposed Framework For The Regulation Of Bioprinted Organs, Linda Foit

Fordham Law Review

Each day, seventeen people die in the United States while waiting for an organ transplant. At least part of this need could be met by bioprinting, a technology that allows the on-demand production of custom-sized organs from a patient’s own cells. The field of bioprinting is progressing rapidly: the first bioprinted organs have already entered the clinic. Yet, developers of bioprinted organs face significant uncertainty as to how their potentially lifesaving products will be regulated—and by which government agency. Such regulatory uncertainty has the potential to decrease investment and stifle innovation in this promising technological field. This Note examines how …

Block Copolymer Directed Self-Assembly: Exploring The Efficacy Of Applications In Semiconductor Fabrication, Jakin Bryce Delony

USF Tampa Graduate Theses and Dissertations

Over the course of the past 80 years, semiconductor devices have become increasingly ubiquitous in everyday life.From constructing mainframes that encompassed entire rooms during the 1940s, to inventing personal computers in the 1980s, to developing progressively faster smartphones and wearable technology in the 2010s, the primary driving force behind the Digital Revolution has been increasing transistor counts, and thus computing power, via incremental improvements in optical lithography. In 1965, Intel co-founder Gordon Moore boldly predicted that the transistor density of semiconductor devices would double approximately every 18-24 months. While this prediction -- now colloquially referred to as Moore's Law -- …

Polyaniline/Cobalt Nanoparticle Composite Films, Rifat Mahbub

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Polymer nanocomposites have been gaining attention because of the enhanced properties of the element materials it can offer. These composites have been used in biological sector as well as quantum computing and memory devices. These are also used as different kind of sensors. Polymer composites incorporated with magnetic nanoparticles can modify the magnetic property of the nanoparticles and that has huge potential to be used in different sort of applications.

This work aims to develop a polymeric nanocomposite incorporating a conducting polymer and magnetic nanoparticles. The influence of the conducting polymer on the magnetic property of the nanoparticles was investigated. …

Soft Magnetic Composite Substrates For Rf/Microwave Applications, Poonam Lathiya

USF Tampa Graduate Theses and Dissertations

Novel soft magnetic ferrite materials will play a crucial role in next-generation over one trillion sensors (also known as “trillion sensor economy) related to 5G communications and internet of things, as these materials can achieve improved wireless power and signal transfer efficiency with high operation frequency. In this work, Ni-Cu-Zn and Ni-Co-Zn ferrites with high permeability, high permittivity, and low magnetic and dielectric losses were prepared for RF and microwave device applications. Frequency dispersion of RF complex permeability of Ni-Cu-Zn ferrites prepared under different applied hydraulic pressures and durations have been thoroughly investigated. The Ni0.35Cu0.19Zn0.46Fe2O4 ferrites were prepared by conventional …

Tuning Between Quenching And Energy Transfer In Dna-Templated Heterodimer Aggregates, Azhad U. Chowdhury, Jonathan S. Huff, Matthew S. Barclay, Lance K. Patten, Aaron Sup, Natalya Hallstrom, Jeunghoon Lee, Paul H. Davis, Daniel B. Turner, Bernard Yurke, William B. Knowlton, Ryan D. Pensack

Materials Science and Engineering Faculty Publications and Presentations

Molecular excitons, which propagate spatially via electronic energy transfer, are central to numerous applications including light harvesting, organic optoelectronics, and nanoscale computing; they may also benefit applications such as photothermal therapy and photoacoustic imaging through the local generation of heat via rapid excited-state quenching. Here we show how to tune between energy transfer and quenching for heterodimers of the same pair of cyanine dyes by altering their spatial configuration on a DNA template. We assemble “transverse” and “adjacent” heterodimers of Cy5 and Cy5.5 using DNA Holliday junctions. We find that the transverse heterodimers exhibit optical properties consistent with excitonically interacting …

Effects Of Annealing Ambient On The Structural, Optical And Electrical Properties Of Tio2:Ge Thin Films, Lilian A. Owino, Sebastian Waita, Robinson J. Musembi, Francis W Nyongesa

Tanzania Journal of Science

TiO2, a semiconducting material with a wide energy band gap, has been researched intensively due to its interesting properties and many potential applications. The films properties can as well be modified by preparing the films under diverse ambient to suit diverse applications. In this work, the effects of the annealing atmosphere on the structural, optical and electrical properties of pure TiO2 and TiO2:Ge composite thin films deposited by sputtering from commercially available pure TiO2 and TiO2:Ge (85:15) targets respectively were studied. The films were deposited on fluorine doped tin oxide glass substrates by radio frequency magnetron sputtering technique at room …

Method Of Making Hinged Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A method is provided for fabricating a passive optical sensor on a tip of an optical fiber. The method includes perpendicularly cleaving a tip of an optical fiber and mounting the tip of the optical fiber in a specimen holder of a photosensitive polymer three-dimensional micromachining machine. The method includes forming a three-dimensional microscopic optical structure within the photosensitive polymer that comprises a two cavity Fabry-Perot Interferometer (FPI) having a hinged optical layer that is pivotally coupled to a suspended structure. The method includes removing an uncured portion of the photosensitive polymer using a solvent. The method includes depositing a …

Nanofibers For Renewable Energy, Michael Wildy, Ping Lu

College of Science & Mathematics Departmental Research

Electrospinning is a straightforward technique for the fabrication of nanofibers with the potential for various applications. Thermal energy storage systems using electrospun nanofibers have gained researchers’ attention due to its desirable properties such as nanoscale diameter, large surface area, excellent thermal conductivity, and high loading and thermal energy storage capacity. The encapsulation of phase change materials (PCMs) in electrospun nanofibers for storing renewable thermal energy can be achieved by uniaxial electrospinning of a blend of PCM and polymer, coaxial electrospinning of a PCM core and a polymer sheath, or post-electrospinning absorption. The PCM content and thermal energy storage capacity of …

In Situ Characterization Of Electrode Structure And Catalytic Processes In The Electrocatalytic Oxygen Reduction Reaction, Ya-Chen Feng, Xiang Wang, Yu-Qi Wang, Hui-Juan Yan, Dong Wang

Journal of Electrochemistry

As an electrochemical energy conversion system, fuel cell has the advantages of high energy conversion efficiency and high cleanliness. Oxygen reduction reaction (ORR), as an important cathode reaction in fuel cells, has received extensive attention. At present, the electrocatalysts are still one of the key materials restricting the further commercialization of fuel cells. The fundamental understanding on the catalytic mechanism of ORR is conducive to the development of electrocatalysts with the enhanced activity and high selectivity. This review aims to summarize the in situ characterization techniques used to study ORR. From this perspective, we first briefly introduce the advantages of …

An Additive Incorporated Non-Nucleophilic Electrolyte For Stable Magnesium Ion Batteries, Mao-Ling Xie, Jun Wang, Chen-Ji Hu, Lei Zheng, Hua-Bin Kong, Yan-Bin Shen, Hong-Wei Chen, Li-Wei Chen

Journal of Electrochemistry

Non-nucleophilic electrolytes are promising next-generation highly stable electrolytes for magnesium-ion batteries (MIBs). However, a passivation layer on Mg metal anode usually blocks Mg²⁺ diffusion, leading to poor reaction kinetics and low Coulombic efficiency of the Mg plating/stripping in these electrolytes. Here we explore the utilization of phenyl disulfide (PDF) as a film-forming additive for non-nucleophilic electrolytes to regulate the interfacial chemistry on Mg metal anode. Phenyl-thiolate generated from the PDF additive was found to suppress the unfavorable surface blocking layer, resulted in a high Coulombic efficiency of up to 99.5% for the Mg plating/stripping process as well as a …

Synchrotron X-Rays Characterizations Of Metal-Air Batteries, Ya-Jie Song, Xue Sun, Li-Ping Ren, Lei Zhao, Fan-Peng Kong, Jia-Jun Wang

Journal of Electrochemistry

The rapid development of electric vehicles urgently requires high-energy-density batteries. Recently, metal-air batteries have attracted much attention in industry and academia for their ultra-high theoretical energy densities. However, the practical application of metal-air batteries is severely impeded by multiple drawbacks, including severe side reactions, low energy efficiency, and limited cycle life. Understanding the reaction mechanism of the cell and further developing effective strategies are beneficial for the practical application of metal-air batteries. In the past decade, advanced characterization techniques have accelerated the development of metal-air batteries. In particular, synchrotron radiation-based characterization techniques have been widely applied to the mechanistic study …

In-Situ/Operando57Fe Mössbauer Spectroscopic Technique And Its Applications In Nife-Based Electrocatalysts For Oxygen Evolution Reaction, Jafar Hussain Shah, Qi-Xian Xie, Zhi-Chong Kuang, Ri-Le Ge, Wen-Hui Zhou, Duo-Rong Liu, Alexandre I. Rykov, Xu-Ning Li, Jing-Shan Luo, Jun-Hu Wang

Journal of Electrochemistry

The development of highly efficient and cost-effective electrocatalysts for the sluggish oxygen evolution reaction (OER) remains a significant barrier to establish effective utilization of renewable energy storage systems and water splitting to produce clean fuel. The current status of the research in developing OER catalysts shows that NiFe-based oxygen evolution catalysts (OECs) have been proven as excellent and remarkable candidates for this purpose. But it is critically important to understand the factors that influence their activity and underlying mechanism for the development of state-of-the-art OER catalysts. Therefore, the development of in-situ/operando characterizations is urgently required to detect key intermediates along …

Rational Design Of Electrochemical Molecular Probes For Highly Selective And Long-Term Measurement In Vivo, Yue Wang, Li-Min Zhang, Yang Tian

Journal of Electrochemistry

Designing electrochemical interfaces for in vivo analysis of neurochemicals with high selectivity and long-term stability is vital for monitoring dynamic variation and dissecting the complex mechanisms of pathogenesis in living animals. This review focuses on the development of electrochemical interfaces based on rational design of molecular probes for in vivo measurement with high selectivity and high stability from three aspects: (1) Specific recognition probes were rationally designed and created to remarkably improve the selectivity of in vivo analysis in a complicated brain environment. (2) The Au-C≡C functionalized surface was developed to remarkably enhance the stability of molecular assembly, and employed …

Tuning Electrochemical Interactions And Polymer Electrolyte Interfaces For Enhanced Organic Acid Separations Using Electrodeionization, Matthew Leo Jordan

LSU Doctoral Dissertations

Chemical separations are critical processes for chemical and industrial plants to purify and isolate products however current separation technologies, such as distillation, rely on energy intensive processes. Electrochemical separation processes, such as electrodialysis and electrodeionization, are an energy efficient alternative that are emerging as an alternative for thermal-based separations. Organic acids are weakly ionizable species and susceptible for purification from process streams using electrochemical processes. Recently the fermentation route has garnered greater attention as a means for producing value-added chemicals, such as organic acids, from a renewable feedstock and aiding the circular economy. Some of the challenges electrodialysis faces for …

Discussion Of Materials Science Development Trend Through Climate Change, Manufacturing Update, National Security And Materials Genome Initiative, Weijian Lin, Bowen Zhang, Weihua Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

New materials are considered as the foreguide and the base of the revolution of advanced technology. Its development and trend of new materials greatly influences the human life and society development. Nowadays, the risk of climate change is increasing day by day, the pressure of manufacturing update of new technology revolution is bigger than ever, the competition and the friction between countries become more and more intense, and the iteration of advanced materials turns to a rigid demand. In this work, we analyze and predict the development tread of material from the aspects of climate change, manufacturing update, national security, …

Development Strategies Of New Energy Materials For Carbon Peak And Neutrality—Case Study Of Songshan Lake Materials Laboratory, Ximei Qiu, Yan Wang, Haiming Lyu, Jian Xu, Yida Wu, Xiaowei Ma, Chunyi Zhi, Xiaolong Du, Xuejie Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Transformative energy technologies will provide strong strategic support to the realization of peaking carbon dioxide emissions before 2030, and achieving net zero carbon emissions before 2060. Reducing the dependence on fossil fuels by saving energy and reducing emissions from the source is essential to achieve the double-carbon target as soon as possible. Songshan Lake Materials Laboratory is working on key materials to develop solar-battery power systems and electrification of transportation energy to return coal, oil, and natural gas from fuels to materials. This study focuses on introducing the research team of its New Energy Materials and Devices R&D Center with …

Development Strategy Of China’S Advanced Material Industry Cluster, Kun Zeng, Xiaopeng Li, Ziyun Shen, Fan Liao, Jinsong Xiao, Qingli Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The advanced material industry is a basic and strategic industry of the national economy, as well as the key area of global competition in technology industry. Under the dual-cycle development pattern, propelling the cluster development of advanced material industry has become a key to raise the level of the advanced material industry development. This article described the spatial distribution of the advanced material industry cluster in China, analyzed the characteristics and development stage of the advanced material industrial cluster, and compared the gap between the advanced material industry cluster in China and the world-class advanced manufacturing industry cluster. In addition, …

Development And Implication Of Amorphous Alloys, Weihua Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The development of metallic materials is closely correlated to the civilization of human being. Amorphous alloys with long-range disordered atomic microstructure, unique physical and mechanical properties, are advanced and novel metallic materials which have diverse industrial applications. Recently, the scientific research, new system development, and industry applications of the structural disordered alloys such as amorphous alloys and high entropy alloy are fast developing, and have significant influence on fields such as the desgin and development of metallic materials, structural materials, green materials, magnetic materials, catalytic materials, and information materials. In this article, we review the history, the development trends, the …

Development And Thinking Of Silicon Photonics Heterogenous Integration, Zihao Wang, Ting Wang, Jianjun Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Integrated photonics are fast-developing research field for next generation information technology. Current silicon photonic integrated chips strongly benefit from low-cost and high-density integration properties of existing CMOS technology. But limited by the physical properties of silicon, it is not a perfect material for different types of optoelectronic devices, such as laser sources, modulators, and infrared detectors. Therefore, heterogeneous integration is proposed by combining the advantages of CMOS process and superior opto-electric properties of heterogenous material systems, that can be an essential step towards next generation integrated optoelectronic chips. Here, this paper introduces the rapid progress of integrated photonics nationally and …

Two-Dimensional Materials: From Fundamental To Application, Guangyu Zhang, Geng Long, Shenghuang Lin, Lede Xian, Yan Jiang, Hao Wu, Shuopei Wang, Na Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

The rapid development of the information society puts forward an ever-increasing urgent need for information storage, processing, and transmission capabilities. With the ending of Moore's Law, the semiconductor industry urgently needs to find new solutions. Lowdimensional materials are considered to be a new breakthrough in the semiconductor industry in the post-Moore era, because of the size characteristics of atomic-level thickness, the structural advantage of no dangling bonds on the surface, and the sensitivity to electrical and optical control methods caused by a large specific surface area. Songshan Lake Materials Laboratory has introduced a group of top scientists and established a …

Is There Any Role Of Reduction Mammoplasty In Decreasing Breast Cancer Risk In Gigantomastia?, Fatma Nilay Tutak, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Aim: Large breasts create psychological and physical problems in women, all of whom must also keep in mind the common problem of breast cancer. In the present study we examine the effect of breast reduction surgery on breast cancer risk. Materials and Methods: Our retrospective study is based on the records (between June 1, 2014, and June 30, 2019) of patients who underwent breast reduction surgery in the Plastic, Reconstructive and Aesthetical Surgery clinic of a training and research hospital. Statistical analyses were conducted using IBM SPSS Statistics (Version 25.0. Armonk, NY:IBMCorp.). Normal distribution of the data was analyzed with …

Development Of Cost-Effective High-Modulus Asphalt Concrete (Hmac) Mixtures Using Crumb Rubber And Local Construction Materials In Louisiana., Ibrahim A.I.E Elnaml

LSU Master's Theses

One of the emerging solutions to enhance the durability of asphalt pavements is the use of a French asphalt mix known as “High-Modulus Asphalt Concrete (HMAC).” This mix uses a hard asphalt binder, high binder content (about 6%), and low air voids content as compared to Superpave mixtures. The key objective of this study was to develop a cost-effective HMAC mixture using crumb rubber and local materials in Louisiana. To achieve this objective, four HMAC mixtures were prepared using two asphalt binders (PG 82-22 and PG 76-22 plus 10% crumb rubber) and two Reclaimed Asphalt Pavement (RAP) contents (20% and …

Ultrahigh Piezoelectric Performance Through Synergistic Compositional And Microstructural Engineering, Yongke Yan, L. D. Geng, Li Feng Zhu, Haoyang Leng, Xiaotian Li, Hairui Liu, Dabin Lin, Ke Wang, Yu Wang, Shashank Priya

Michigan Tech Publications, Part 1

Piezoelectric materials enable the conversion of mechanical energy into electrical energy and vice-versa. Ultrahigh piezoelectricity has been only observed in single crystals. Realization of piezoelectric ceramics with longitudinal piezoelectric constant (d33) close to 2000 pC N–1, which combines single crystal-like high properties and ceramic-like cost effectiveness, large-scale manufacturing, and machinability will be a milestone in advancement of piezoelectric ceramic materials. Here, guided by phenomenological models and phase-field simulations that provide conditions for flattening the energy landscape of polarization, a synergistic design strategy is demonstrated that exploits compositionally driven local structural heterogeneity and microstructural grain orientation/texturing to provide record piezoelectricity in …

Computational Study Of The Reactions Of Heteroatomic Compounds On Ceo2, Suman Bhasker Ranganath

LSU Doctoral Dissertations

The mechanisms of ambient-temperature reactions of heteroatomic compounds catalyzed by ceria (CeO₂), an archetypical reducible oxide, for enzyme mimetics, environmental protection, and chemical synthesis are investigated in this dissertation using theoretical methods. CeO₂ is modeled with thermodynamically stable low-index surfaces exposed by commonly studied ceria thin films and nano particles. To understand phosphatase-like dephosphorylation activity, stable adsorption states and surface reactions of model phosphates are examined. Binding of the central P-atom to surface lattice oxygen (O_latt) supplemented by phosphoryl O-Ce interaction is the only stable adsorption state for the un-dissociated molecule. Deprotonation of phosphate monoesters, …

Thermomechanics Of Semiconducting Polymers And Their Morphological Phenomena, Luke Galuska

Dissertations

In contrast to conventional silicon-based electronics, semiconducting polymers show great promise for emerging applications in soft, flexible, and ductile electronic technologies. This is due to their polymeric nature, tailorable structure, and sub-100 nm device thickness. Despite this mechanical novelty, there remains a poor understanding of their structure-property-processing relationships, which has hindered growth within the field. This dissertation elucidates these relationships through investigation of their thermomechanics, and morphological phenomena. This was accomplished through the following projects:

1) To demonstrate the impact of backbone rigidity on semiconducting polymer thermomechanics, we varied the backbone rigidity of an NDI-based polymer by inserting flexible methylene …

Polarization-Sensitive Optical Responses From Natural Layered Hydrated Sodium Sulfosalt Gerstleyite, Ravi P. N. Tripathi, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-element layered materials have gained substantial attention in the context of achieving the customized light-matter interactions at subwavelength scale via stoichiometric engineering, which is crucial for the realization of miniaturized polarization-sensitive optoelectronic and nanophotonic devices. Herein, naturally occurring hydrated sodium sulfosalt gerstleyite is introduced as one new multi-element van der Waals (vdW) layered material. The mechanically exfoliated thin gerstleyite flakes are demonstrated to exhibit polarization-sensitive anisotropic linear and nonlinear optical responses including angle-resolved Raman scattering, anomalous wavelength-dependent linear dichroism transition, birefringence effect, and polarization-dependent third-harmonic generation (THG). Furthermore, the third-order nonlinear susceptibility of gerstleyite crystal is estimated by the probed …

Optimization Of A Novel Nipam-Based Thermoresponsive Copolymer For Intramuscular Injection As A Myoblast Delivery Vehicle To Combat Peripheral Artery Occlusive Disease, Quentin R. Klueter

Master's Theses

There is a need for a minimally invasive delivery method to enable cell therapies to combat peripheral artery occlusive disease (PAOD) in end stage patients. Myoblasts show promise as a cell mediated therapy but warrant an improved delivery method to increase cell retention in the region of interest because of their adherent nature, relative to previously used BM-MNC’s that are non-adherent. Contemporary issues with achieving successful cell therapies of vasculature can be mainly characterized by the lack of clinical translation from promising animal studies and absence of cell delivery scaffolding. Naturally, polymers have been widely experimented with as grafts to …