Materials Science and Engineering Commons^™

Synthesis Of Aromatic Acetylene Alcohols Based On Benzaldehyde And Its Halogenated Products, Sanat Samatov, Abduvakhab Ikramov, Saida Abdurakhmanova, Odiljon Ziyadullayev, Guzal Otamukhamedova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this study is to synthesize the corresponding aromatic acetylenic alcohols by alkylation with phenylacetylene in a complex catalytic system based on Zn(OTf)₂ and TBAF·3H₂O for the first time with benzaldehyde and some of its halogen derivatives. The selectivity and stability of catalysts used for the yields of reactions for the synthesis of aromatic acetylene alcohols were analyzed. The effect of benzaldehyde and its halogenated derivatives on the product yield was analyzed. The nature, structure, isomerism, spatial structure and other properties influenced to this reactions were studied. Some features of reactions of synthesis of aromatic …

Study Of Sorption Of Some Metal Ions By The Obtained Phosphoric Acid Cation Exchanger Of Polycondensation Type, Malika Berdieva, Rano Nazirova, Alisher Yuldashev, Umida Sharipova, Dilmurod Azimov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to investigate the sorption of Cu²⁺, Co²⁺, Ni²⁺, UO₂²⁺ ions, etc. depending on the ionic form of the cationite and the pH of the medium on phosphoric acid cationite obtained by forsforylation of a polymer based on cubic waste of the Shurtan gas-chemical complex and a secondary product of the hydrolysis industry – furfural. It was found that copper and UO₂²⁺ ions are best sorbed by cationite when the cationite is in Na form. The UO₂²⁺ ion is sorbed fairly well in …

Thermal Properties Of Polyelectrolyte Complexes Of Bombyx Mori Chitosan With Collagen, Shuhrat Khudoyberdiev, Noira Vokhidova, Mukhitdin Abdurazakov, Sayora Rashidova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work was to study the thermal behavior of the polyelectrolyte complexes of Bombyx mori ChS with collagen. As a result of the studies, the thermal properties of polyelectrolyte complexes based on Bombyx mori chitosan with collagen in wt. rel. 1:0,1 and 1:0,2 respectively. It has been determined that the most significant weight changes for chitosan with a molecular weight of 15×10³ and the degree of deacetylation of 85% occur at a temperature is 270 °C, when the mass loss rate reaches its maximum value. For collagen, the same temperature is 277 °C. For complexes ChS/collagen …

Glass Micro-Beads For Road Markings On The Basis Of Local Raw Materials, Farrukh Erkinov, Mastura Aripova, Jae-Shin Lee

CHEMISTRY AND CHEMICAL ENGINEERING

One of the priorities for the development of chemical and technological processes in the field of road-building materials and their quality is the production of materials for road markup based on glass micro-beads.

The use of glass micro-beads ensures the required retro-reflection of road marking and indicators of resistance to external influences, compliance with the requirements of regulatory documents. Therefore, the task of developing research approaches to develop a composition and control of road marking, which provide high performance and reduce accidents is an urgent problem.

For this purpose, on the basis of local raw materials, the theoretical foundations of …

Research Of The Process Of Obtaining Crystalline Monocalcium Phosphate Based On Extraction Phosphoric Acid From Phosphorites Of Central Kyzylkums, Kholtura Mirzakulov, Gavkhar Melikulova, Mohichehra Shaymardanova, Sherzod Khujamberdiev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to establish the optimal parameters of the technological process for the production of feed, crystalline monocalcium phosphate based on defluorinated and desulphated extraction phosphoric acid obtained from phosphorites of the Central Kyzylkum and limestone.

The influence of technological parameters, such as the norms and concentration of phosphoric acid, the process temperature on the filtration rate indicators, the rheological properties of the suspension and the mother liquor, as well as the dependence of the change in the commercial property of crystalline feed monocalcium phosphate, were studied.

It is shown that, regardless of the initial acid …

Investigations Of Roasting Process And Fractional Composition Of Zinc Concentrate Of Khandiza Deposit, Jasur Makhmayorov, Zafar Khakimov, Bakhrom Makhkamov, Murodjon Samadiy

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to study the effect of the process of calcining zinc concentrate from the Khandiza deposit on the degree of zinc extraction and fractional composition. For this, the chemical composition of the concentrate was established and it was shown that the main components are zinc, silicon, potassium, calcium, iron, copper, cadmium, and lead. Titanium, manganese, cobalt, and molybdenum are also contained in small amounts.

Extraction of zinc from a concentrate, calcined at 900 °C for 90 minutes with sulfuric acid with concentration of 18-25% in an autoclave at a temperature of 75 °C, a ratio …

Technology For Producing Alumosilicate Refractory Products Based On Non-Traditional Raw Materials Of Uzbekistan, Ripsime Mkrtchyan

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to develop a technology for producing aluminosilicate refractory products based on non-traditional raw materials - clay shale from the Jerdanak deposit and quartz-pyrophyllite rock from the Boynaksai deposit. The characteristics of prototypes of refractory materials were studied at different ratios of chamotte and binder. Quartz-pyrophyllite rock in its natural state and clay shale after firing at a relatively low temperature (1000 °C) were used as fireclay. The phase composition of the obtained materials was studied by X-ray diffraction and their fine structure by electron microscopy. Technological schemes for obtaining refractory products based on clay …

Designing & Building A Microwave Plasma Reactor For Graphene Synthesis, Aviv Zohman, Jerry Larue

Student Scholar Symposium Abstracts and Posters

Graphene’s remarkable electrical, optical, and chemical properties make it a promising successor to indium tin oxide for applications in flexible, transparent electronics. However, efforts to manufacture graphene have been hindered by inefficient synthesis and transfer methods. Chemical vapor deposition (CVD) is commonly used to produce graphene. CVD starts with a blank surface onto which a chemical vapor is deposited to create a single graphene layer. CVD requires extreme temperatures, so only substrates with high melting points are applicable, like metals. This excludes insulative substrates such as polymers which are essential to transparent and flexible devices. Therefore, a subsequent process transfers …

Electromechanical Fatigue Properties Of Dielectric Elastomer Stretch Sensors Under Orthopaedic Loading Conditions, Andrea Karen Persons

Theses and Dissertations

Fatigue testing of stretch sensors often focuses on high amplitude, low-cycle fatigue (LCF) behavior; however, when used for orthopaedic, athletic, or ergonomic assessments, stretch sensors are subjected to low amplitude, high-cycle fatigue (HCF) conditions. As an added layer of complexity, the fatigue testing of stretch sensors is not only focused on the life of the material comprising the sensor, but also on the reliability of the signal produced during the extension and relaxation of the sensor. Research into the development of a smart sock that can be used to measure the range of motion (ROM) of the ankle joint during …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Characterization Of Hydrogen Embrittlement Sensitivity In High Hardness Steels, David Ahlen Salley

Theses and Dissertations

High hardness steels can be affected by delayed brittle cracking often attributed to hydrogen embrittlement. Improved resistance to hydrogen embrittlement would be beneficial to many industries including military, automotive, and high-rise construction. While other prevention methods include coating, trapping, and barriers, design efforts in this study were focused on improving intrinsic properties to be more resistant to hydrogen embrittlement. Four alloys targeting 477 – 534 HB were designed and produced in-house and compared against a commercial grade 500 HB alloy. Charpy V-notch (CVN) impact toughness and tensile specimens were made according to ASTM E23 and ASTM E8 to characterize mechanical …

Hinged Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of the optical fighter using a two-photon polymerization process on a photosensitive polymer by a three-dimensional micromachining device. The three-dimensional microscopic optical structure having a hinged optical layer pivotally connected to a distal portion of a suspended structure. A reflective layer is deposited on a mirror surface of the hinged optical layer while in an open position. The hinged optical layer is subsequently positioned in the closed position to align the mirror surface to at least partially reflect a light signal back …

Enhancing Stability Of High-Nickel Cathodes For Lithium-Ion Batteries Through Additive Manufacturing Of Cathode Structure, Matthew Sullivan

Mechanical Engineering Undergraduate Honors Theses

Lithium-ion batteries (LIBs) are currently the best method to store electrical energy for use in portable electronics and electronic vehicles. New cathode materials for LIBs are consistently studied and researched, but few are as promising and attainable as nickel-rich transition metal oxides such as LiNi1-x-yMnxCoyO2 (NMC). NMC materials exist with many different mass ratios, but higher nickel content materials provide higher energy density. With this increase in capacity comes a sacrifice with cyclability, as high-nickel NMC variants are prone to structure collapse, transition metal dissolution, and cracks due to volume change. In this report, mechanical modification of the electrode by …

Durability Of Non-Metallic Materials For Additively Manufactured Heat Spreader Fabrication, Rafael Estrella

Mechanical Engineering Undergraduate Honors Theses

Power electronics are necessary to convert power from DC sources for AC applications. As this technology trends toward smaller packaging for denser power loads, the increased electrical losses result in deleterious excess heat. Thermal management devices are required to prevent the effects of thermal runaway from shortening the longevity of these modules. Nonmetallic jet impingement heat spreaders provide several benefits in terms of weight and performance over conventional cold plates while not accentuating EMI from the switches in the power module; however, the polymer makeup of the materials previously used for fabricating these devices raises durability concerns under the high …

Reactive Thin Film Polymers And Thin Film Composite Membranes For The Rapid Screening Of Uranium Isotopes, Abenazer W. Darge

All Dissertations

Traditional radiochemistry approaches for the detection of trace-level alpha-emitting radioisotopes in water require lengthy offsite sample preparations and do not lend themselves to rapid quantification. Therefore, a novel platform is needed that combines onsite purification, concentration, and isotopic screening with a fieldable detection system. My dissertation research objective was to develop novel reactive thin polymer films and thin film composite membranes for the selective separation of uranium from environmental water followed by direct isotopic analysis by alpha spectroscopy. Chapter 1 reviews progress made on uranium separation from aqueous matrices and discusses methods used for the determination of isotopic composition.

Chapter …

Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle

Chemical Engineering Undergraduate Honors Theses

This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …

Investigating The Effect Of Polymer Hydrogels On The Antimicrobial Properties Of Activated Carbon Through The Utilization Of Bacterial, Viral, And Parasitic Microorganisms, Zoe Gunter

Honors Theses

Activated carbon (AC) has long been utilized in biomedical applications due to its innate antimicrobial characteristics. However, little is understood about the mechanism of action that allows AC to prohibit the propagation of different pathogen species. To further ascertain these characteristics and how they affect the propagation of pathogens, procedures were designed with bacterial, viral, and parasitic agents which were utilized in conjunction with varying concentrations of polymer hydrogels to examine the antimicrobial efficacy of AC. The studies performed for this thesis were conducted employing coconut-based AC and Noveon^® AA-1 Polycarbophil USP or Carbopol^® 974P NF hydrogels which, …

Rheological Behavior Of Dspc-, Dbpc-, And Dppc-Oxygen Microbubbles And Their Effectiveness In Improving Survival In A Rat Model Of Lipopolysaccharide-Induced Acute Respiratory Distress Syndrome, Riaz Ur Rehman Mohammed

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Acute respiratory distress syndrome (ARDS) causes 75,000 deaths in the U.S., annually. It is characterized by hypoxemia and damage to the lung alveoli. ARDS Management strategies involve extracorporeal membrane oxygenation (ECMO) and mechanical ventilation, but none of these methods improve the mortality rates. Oxygen microbubbles (OMBs) consist of a lipid shell with an oxygen core and have potential to augment oxygenation to manage ARDS. Previous studies demonstrated significant improvements in systemic oxygenation and mortality upon administering OMBs.

We replicated an ARDS rat model by intratracheal administration of lipopolysaccharide at a 24 mg/kg dose. After inducing the disease in rats, the …

Insect Antennae As Bioinspirational Superstrong Fiber-Based Microfluidics, Griffin J. Donley

All Theses

Nature is frequently turned to for inspiration for the creation of new materials. Insect antennae are hollow, blood-filled fibers with complex shape, and are cantilevered at the head. The antenna is muscle-free, but the insect can controllably flex, twist, and maneuver it laterally. To explain this behavior, a comparative study of structural and tensile properties of the antennae of Periplaneta americana (American cockroach), Manduca sexta (Carolina hawkmoth), and Vanessa cardui (painted lady butterfly) was performed. These antennae demonstrate a range of distinguishable tensile properties, responding either as brittle fibers (Manduca sexta) or strain-adaptive fibers that stiffen when stretched (Vanessa cardui …

Near-Earth Ion Irradiation Effects On Functional Ceramic Materials: A Combined Experimental-Monte Carlo Approach, William J. Sands

All Theses

The near-Earth space radiation environment is a complex system that creates a harmful environment for materials to operate in. Motivated by the search for using optical defects as an indicator of radiation damage, five single-crystal functional ceramic materials were selected to undergo ion irradiation at conditions found in the near-Earth space environment. Due to the complex nature of ion irradiation effects in ceramic materials, a host of calculations and experimental characterization methods were used. Calculations using the 2013 SRIM code were used to evaluate the ion projected range and the type and number of defects (vacancies) created by ion irradiation. …

Investigating The Effects Of Sic Abrasive Particles On Friction Element Welding, Gaurav Awate

All Theses

The growing demands on reducing the harmful emissions from automobiles have forced automakers to reduce the weight of the vehicle. The increasing demands on improving the fuel economy also has challenged automotive manufacturers to make the vehicle as lightweight as possible. However, the challenge is also to ensure that the vehicle meets safety standards. For the vehicle to meet these standards, it needs to be of adequate strength as well. Automotive manufacturers have adopted a strategy of using multi-material construction to achieve the target. But with multi-material construction comes the requirement of advanced joining techniques that are capable of joining …

Mechanochromic Tunable Emissions Of Hydrogel Encapsulated Radioluminescent Crystalline Colloidal Arrays, Sarah Mell

All Theses

Crystalline colloidal arrays (CCAs) are periodic dielectric arrays composed of monodisperse, negatively charged nanoparticles with unique optical characteristics. Poly(styrene-co-propargyl acrylate) (PS-PA) based copolymer nanoparticles synthesized via an emulsion polymerization form the basis of the CCAs in this work. The negatively charged surfaces result in the colloidal nanoparticles self-assembling into a face-centered cubic (fcc) crystal-like structure. The long-range order and spatial periodicity of the array result in a rejection wavelength, characteristic of CCAs, in which a specific wavelength of light is forbidden from propagating throughout the optical system. The CCAs exhibit mechanochromism through a rejection wavelength shift corresponding to a change …

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

Cyanate ester resins are often blended with lower cost epoxy monomers in order to modify the cost, toughness, and processing characteristics. There are also several choices of catalysts that can be used to improve processing, namely by reducing the cure temperature. This study was undertaken to illustrate how a designed experiment approach can be used to systematically investigate a wide range of material combinations and illuminate the basic cure behavior of some simple cyanate ester – epoxy blend combinations. Two commercial cyanate ester resin products were obtained. Each was blended with a bisphenol F based epoxy resin at two different …

Additive Manufacturing Of Variable Contrast Computed Tomography Anatomical Phantoms Using A Single Feedstock In Fused Filament Fabrication, Cory J. Darling

LSU New Orleans Theses and Dissertations

Anatomical phantoms used in biomedical education and training benefit greatly from Fused filament fabrication’s (FFF) ability to rapidly produce complex and unique models. Current materials and methods used in FFF have limited ability to accurately produce phantoms that can mimic the radiological properties of multiple biological tissues. This research demonstrates that the CT contrast of FFF produced models can be modified by varying the concentration of bismuth oxide in acrylonitrile butadiene styrene (ABS) filaments and a tunable CT contrast that mimics the CT contrast ranging from fatty tissue to cortical bone using a single composite filament without introducing artificial image …

Properties Of 25cr7ni Stainless Steel Fabricated Through Laser-Powder Bed Fusion., Arulselvan Arumugham Akilan

Electronic Theses and Dissertations

Stainless steel is a low carbon high alloyed system with higher concentrations of Cr& Ni, which impart high corrosion resistance to them. Alloys with approximately 25% Cr & 7% Ni in their chemical composition are commercially referred to as ‘Super Duplex Stainless Steel’. They have a unique phase composition of approximately 50% ferrite & 50% austenite, yielding a robust combination of high mechanical strength & corrosion resistance. They find extensive interest & application in the fields which demand a longer service life under intense mechanical / corrosive environment such as offshore oil rigs & pipelines in nuclear power plants. Traditional …

Simulation Of Li Dendrite Inhibition In Lithium Battery By Phase-Field Method, Yao Ren

Material Science and Engineering Dissertations - Archive

Lithium (Li) dendrite growth poses serious challenges for the development of Li metal batteries which also stops the footsteps of human utilizing the environment-friendly new power source. Replacing liquid electrolyte with solid electrolyte can not only inhibit the dendrite growth by mechanical suppression, but also introduce more possibilities to the electrochemistry of battery. However, the underlying mechanism is still not fully understood, and most theoretical works focus on pure liquid electrolyte, ignoring the mechanical strain effects. Here we developed a phase-field model which simulates the Li dendrite growth to study the competition between diffusion and deposition rates, the pure elastic …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

Porous Silicon Photonics For Label-Free Interferometric Biosensing And Flat Optics, Tahmid Hassan Talukdar

All Dissertations

This dissertation uses porous silicon as a material platform to explore novel optical effects in three domains: (i) It studies dispersion engineering in integrated waveguides to achieve high performance group index sensing. With proper design parameters, the sensor waveguides can theoretically achieve 6 times larger group index shift compared to the actual bulk effective refractive index shift. We demonstrate the guided mode confinement factor to be a key parameter in design and implementation of these waveguides. (ii) It explores multicolor laser illumination to experimentally demonstrate perceptually enhanced colorimetric sensing, overcoming the limitations faced by many contemporary colorimetric sensors. Our technique …

Hydration Of High-Alumina Calcium Aluminate Cements With Carbonate And Sulfate Additives, Jonathan Lapeyre, Sai Akshay Ponduru, Monday Uchenna Okoronkwo, Hongyan Ma, Aditya Kumar

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study investigated the influence of limestone (LS) and calcium sulfate (C$) mineral additives on the hydration kinetics of high-α-Al₂O₃ calcium aluminate cement (CAC) utilizing experimental techniques and thermodynamic simulations. Increasing the replacement level of limestone or calcium sulfate increased the cumulative heat of the hydration reaction. The limestone exhibited limited acceleratory effects to the CAC hydration kinetics due to the coarseness of the powder. The coarse particle size distribution limited any heterogenous nucleation that would have occurred with a finer particle size as well as the intrinsic insolubility kinetically limits the formation of monocarboaluminate phases. Conversely, …

Synthesis Of Monodisperse Nanoscintillators At High Temperatures For Biomedical Relevant Applications, Eric Zhang

All Dissertations

Luminescent sub-100 nm particulates continuously generate immense research interest in the biomedical field for imaging, theranostics, and optogenetics. Conventionally, upconversion nanoparticles or UV activated semiconductors are studied, however these materials are limited by biological barriers such as the skin which reduces the penetration depth of these excitation sources, tissue's auto- fluorescence, and toxicity. One approach to overcome these challenges is to use nanoscintillators (sub-100 nm materials that can generate visible light using high energy excitation sources such as x-rays) which can generate light locally to the human body. Numerous scintillators have been reported since the discovery of x-rays from the …