Materials Science and Engineering Commons^™

Nanoclays And Curcumin Based Food Packaging Material For Intelligent Food Packaging Applications, Kalpani Y. Perera, Swarna Jaiswal, Amit K. Jaiswal, Shubham Sharma

Articles

Bionanocomposite packaging eco-friendly alternatives with enhanced characteristics. This study aimed to develop a bionanocomposite intelligent packaging. Sodium alginate, gelatin, Curcumin (Cur), glycerol, and Nanoclay (NC) films were prepared. The influences of nanoclay and curcumin on the surface, optical, mechanical, chemical, barrier, and pH-indicating properties were studied. The results showed that the lightness of films was reduced by 1.28 folds compared to NC (control) film, while the yellowness of films increased by 5.82 folds. Film transparency was reduced by 9.3 folds and a 3.46 folds increase in UV barrier properties was observed compared to NC (control) film. The highest tensile strength …

Cold Plasma Technology In Food Packaging, Kalpani Y. Perera, Jack Prendeville, Amit K. Jaiswal, Swarna Jaiswal

Articles

Cold plasma (CP) is an effective strategy to alter the limitations of biopolymer materials for food packaging applications. Biopolymers such as polysaccharides and proteins are known to be sustainable materials with excellent film-forming properties. Bio-based films can be used as an alternative to traditional plastic packaging. There are limitations to biopolymer packaging materials such as hydrophobicity, poor barrier, and thermos-mechanical properties. For this reason, biopolymers must be modified to create a packaging material with the desired applicability. CP is an effective method to enhance the functionality and interfacial features of biopolymers. It etches the film surface allowing for better adhesion …

Thermal Atomic Layer Etching Of Mos2 Using Mof6 And H2O, Jake Soares, Anil U. Mane, Devika Choudhury, Steven Letourneau, Steven M. Hues, Jeffrey W. Elam, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

Two-dimensional (2D) layered materials offer unique properties that make them attractive for continued scaling in electronic and optoelectronic device applications. Successful integration of 2D materials into semiconductor manufacturing requires high-volume and high-precision processes for deposition and etching. Several promising large-scale deposition approaches have been reported for a range of 2D materials, but fewer studies have reported removal processes. Thermal atomic layer etching (ALE) is a scalable processing technique that offers precise control over isotropic material removal. In this work, we report a thermal ALE process for molybdenum disulfide (MoS₂). We show that MoF₆ can be used as …

Thermal Effect On Dislocation Interactions In Magnesium Alloy, Yuzhi Zhu, Yi Chen, Dewen Hou, Zidong Wang

Materials Science and Engineering Faculty Publications and Presentations

In this work, dislocation interactions are directly observed and analyzed by using in-situ transmission electron microscope during heating processes in a pre-deformed Mg-3Al-1Zn magnesium alloy. Thermodynamic behaviors of two types of dislocations are investigated, i.e., individual dislocations and low-angle grain boundary arranged by dislocations. The results show that the low-angle grain boundary remains stable as the heating temperature increases to 673 K, while most of the individual dislocations disappear until the heating temperature reaches 473 K. Furthermore, the low-angle grain boundary tends to absorb individual dislocations nearby. The stability and the annihilation of both types of dislocations are discussed.

Physical Modeling Of Filament Growth And Resistive Switching In Metal Oxide-Based Rram, Kena Zhang

Material Science and Engineering Dissertations - Archive

Metal oxide-based resistive random-access memories (RRAM) exhibit several excellent performances, such as nanosecond switching speed, large write-erase endurance, and long retention time, and can potentially replace the traditional circuit elements for use as the fundamental units in next-generation hardware deep-learning or neuromorphic systems. The functionality of a metal oxide-based RRAM is attributed to an oxygen vacancy (V_O^(..))-rich conductive filament (CF), which initially forms, and later dissolves or regrows inside the oxide layer during the resistive switching process. However, the complicated interplays among the coexisting chemical, electrical, mechanical, and thermal effects during the formation, growth, and rupture of the CFs make …

Effects Of Graphene In High-Density Polyethylene Microfibers, Ashish Lal Sivadas Anilal

Material Science and Engineering Theses - Archive

High-Density Polyethylene uniquely can induce banded spherulites as it is crystallized from its melt. We studied the effects of graphene in the crystallography of banded HDPE by examining parameters such as the extent of twisting, spherulitic growth, and nucleation density. The application of graphene as a multifunctional filler in polymer matrices is a great topic of interest because graphene at low concentrations can bring many improvements in mechanical, electrical, and thermal properties. We synthesized graphene oxide by chemical oxidation of graphite and further studied its effects in the twisted crystallography of HDPE. Three batches of fibers were extruded: two batches …

Sub-10k Cold-Electron Injection To Silicon At Room Temperature, Ojas Tushar Bhayde

Material Science and Engineering Theses - Archive

The Fermi-Dirac thermal excitation of electrons results in unwanted off-state leakage currents in metal-oxide-semiconductor field-effect transistors (MOSFETs), leading to excessive power consumption in modern electronic devices. The electron thermal excitation results in a theoretical subthreshold slope limit of 60 mV/decade at room temperature, which forces the devices to use a high supply voltage leading to high power consumption. This study investigates a new architecture capable of suppressing electron thermal excitation by using a quantum well (QW) as an energy filter. The QW energy filter is composed of a tunneling barrier 1 (0.5 to 1 nm Al2O3 or 0.3-1 nm Si3N4 …

Iron Phosphate Glass For The Immobilization Of Dehalogenated Salt Waste, Matthew Aaron Page

All Theses

Electrochemical reprocessing can be used to recycle presently stored nuclear fuel and consists of dissolving that used fuel in molten salt and the waste produced from these processes is a small amount of a high-level salt waste. Vitrification has been selected as the primary means of safely disposing high and low level radioactive waste. This is due to glass’ ability to incorporate many elements within its matrix, and it is chemically durable with the addition of network formers and other glass forming chemicals. With over 90,000 tonnes of nuclear waste in the United States, the avoidance of additional steps required …

Design, Fabrication, And Characterization Of Conjugated Polymeric Electrochemical Memristors As Neuromorphic/Integrated Circuits, Benjamin Grant

All Dissertations

Organic materials are promising candidates for future electronic devices compared to the complementing inorganic materials due to their ease of processability, use, and disposal, low cost of fabrication, energy efficiency, and flexible nature toward implementation as flexible and non-conformal devices.With that in mind, electrochemical materials have been widely demonstrated with commercial use as sensors, displays, and a variety of other electronic devices. As Moore's law predicts the increase in the density of transistors on a chip, the requirement to create either smaller transistors or the replacement of the transistor device entirely is apparent. Memory resistors, coined ``memristor", are variable resistive …

A Fiber-Optic Sensor-Embedded And Machine Learning Assisted Smart Helmet For Multi-Variable Blunt Force Impact Sensing In Real Time, Yiyang Zhuang, Taihao Han, Qingbo Yang, Ryan O'Malley, Aditya Kumar, Rex E. Gerald, Jie Huang

Materials Science and Engineering Faculty Research & Creative Works

Early on-site diagnosis of mild traumatic brain injury (mTBI) will provide the best guidance for clinical practice. However, existing methods and sensors cannot provide sufficiently detailed physical information related to the blunt force impact. In the present work, a smart helmet with a single embedded fiber Bragg grating (FBG) sensor is developed, which can monitor complex blunt force impact events in real time under both wired and wireless modes. The transient oscillatory signal "fingerprint" can specifically reflect the impact-caused physical deformation of the local helmet structure. By combination with machine learning algorithms, the unknown transient impact can be recognized quickly …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Characterization Of An Amine-Thiol Cosolvent System : Ethylenediamine And Mercaptoethanol, Fernanda Giongo Fernandes

Legacy Theses & Dissertations (2009 - 2024)

Since its introduction, the amine-thiol cosolvent system has been successfully utilized for the deposition of various thin-film devices, but its mechanism of action is still uncertain. Herein, we have attempted to dissect some of the chemical characteristics of amine-thiol cosolvents, with a special interest taken towards a mixture of ethylenediamine (en) and mercaptoethanol (ME). Conductivity was measured for multiple amine-thiol combinations at different ratios to determine extent of ionization in solution, with en-ME having one of the highest solution conductivities. Exposing the solution to air for several days was found to decrease the conductivity of en-ME, indicating the formation of …

Effects Of Surface Noise On Printing Artifacts: An Artistic Approach To Hiding Print Artifacts, Samuel New

All Theses

This research focuses on improving the quality of Fused Filament Fabrication (FFF) 3D printing by using fractal noise to mask certain print artifacts (e.g. layer lines and stair-stepping). The use of textures is quite common in digital sculpting for aesthetic reasons. This study focuses on finding specific textures that minimize visible 3D print artifacts.

Building Structures From Mycelium, Noah M. Brown

Physics

The purpose of this project was to develop a method for creating bricks from mycelium and agricultural waste. The bulk of the research happened in two parts, the first part being a period in which different substrates, strains, and methods were used build the bricks. This research took place in San Luis Obispo and was aided by a group of students in PSC392 under Dr. Pete Schwartz in early 2022. After developing a method for constructing these bricks, the research was moved to St. Thomas, Jamaica, in collaboration with an ecovillage called The Source Farm from July to September. The …

Characterization Of Losses In Superconducting Radio-Frequency Cavities By Combined Temperature And Magnetic Field Mapping, Ishwari Prasad Parajuli

Physics Theses & Dissertations

Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (10¹⁰-10¹¹), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two novel …

Exploring The Effect Of Environmental Degradation On The Shape Memory Properties Of Polymers, Jorge Mario Avila

Open Access Theses & Dissertations

A key detriment of the use of polymers by our society is the negative effect this material class has had on the environment. A category of polymers known as shape memory polymers (SMP)s have the ability to return to a programmed original shape form after deformation to a temporary shape by using stimuli such as temperature, electrical pulses and even magnetism. The shape memory effect allows for some polymers to heal if they are damaged. This ability to heal means that components made from these materials can be reused rather than thrown away if they are damaged. The work presented …

Effects Of Polymer Side-Group Size On Interfacial Mechanics Of Graphene-Polymer Nanocomposites, Grace Brokaw

All Theses

Graphene-reinforced polymer nanocomposites possess excellent mechanical, thermal, and electrical properties, which make them promising candidates for various applications. Favorable interfacial interactions and mechanics between graphene sheets and polymer matrices are often essential to achieve superior mechanical properties. Nevertheless, it remains largely elusive how molecular features of polymer systems, particularly the side-group size of polymer chains, affect the interfacial mechanics between graphene sheets and polymer matrices, primarily due to challenges in well controlling these features in experiments. On the other hand, exploring their roles in the mechanical properties of graphene-polymer nanocomposites is very expensive to study with all-atomistic molecular dynamics (MD) …

An Application Of Optimized Bistable Laminates As A Low Velocity, Low Impact Mechanical Deterrent, Graham Lancaster

All Theses

This research considers the problem of using bistable laminates as a mechanical deterrent to the impending impact of a particle. The structure will be controlled through an algorithm that will utilize piezoelectric devices to activate them in unison with the bistable laminate to successfully deter. A novel experimental setup will be constructed to ensure that the bistable laminate stays fixed when acting as a mechanical deterrent. Piezoelectricity is the main driving force of the bistable laminate to morph and this study will use a Macro Fiber Composite (MFC) actuator that contains piezoelectric ceramic rods in a patch to transfer electrical …

Deep Learning Of Microstructures, Amir Abbas Kazemzadeh Farizhandi

Boise State University Theses and Dissertations

The internal structure of materials also called the microstructure plays a critical role in the properties and performance of materials. The chemical element composition is one of the most critical factors in changing the structure of materials. However, the chemical composition alone is not the determining factor, and a change in the production process can also significantly alter the materials' structure. Therefore, many efforts have been made to discover and improve production methods to optimize the functional properties of materials. The most critical challenge in finding materials with enhanced properties is to understand and define the salient features of the …

Nucleation And Growth Of Molybdenum Disulfide Grown By Thermal Atomic Layer Deposition On Metal Oxides, Jake Soares, Steven Letourneau, Matthew Lawson, Anil U. Mane, Yu Lu, Yaqiao Wu, Steven M. Hues, Lan Li, Jeffrey W. Elam, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

To enable greater control over thermal atomic layer deposition (ALD) of molybdenum disulfide (MoS₂), here we report studies of the reactions of molybdenum hexafluoride (MoF₆) and hydrogen sulfide (H₂S) with metal oxide substrates from nucleation to few-layer films. In situ quartz crystal microbalance experiments performed at 150, 200, and 250 °C revealed temperature-dependent nucleation behavior of the MoF₆ precursor, which is attributed to variations in surface hydroxyl concentration with temperature. In situ Fourier transform infrared spectroscopy coupled with ex situ x-ray photoelectron spectroscopy (XPS) indicated the presence of molybdenum oxide and molybdenum oxyfluoride …

Wet Chemical Synthesis And Properties Of Argyrodite Sulfide Solid Electrolytes For Solid State Lithium Batteries., William Arnold

Electronic Theses and Dissertations

The commercialization of the lithium-ion battery (LIB) in 1991 was responsible for the explosion in portable electronic technologies that has been seen over the past 30 years. With the advent of electric vehicles and other high-powered technologies, there is tremendous demand for LIBs with higher energy density and high safety. To achieve this, new electrode materials must be explored. The obvious choice of anode material would be pure metal lithium, which has a theoretical specific capacity of 3860 mAh g^-1 . Unfortunately, metal lithium anodes have not been widely commercialized due to their tendency to react violently with the …

Heteroepitaxy Of Gasb On Gaas (111)A For Electron Transport Studies, Madison Drake

Boise State University Theses and Dissertations

III-V semiconductors grown by molecular beam epitaxy (MBE) on (111) surfaces have some interesting electronic properties. For certain materials with a (111)-orientation, the Γ- and L-valleys are reasonably close in energy. This means that it may be possible to take advantage of electron conduction in the L- and Γ-valleys at the same time, allowing us to overcome the so-called “density-of-states bottleneck,” and enable transistors with large drive currents.¹ We have investigated this phenomenon in GaSb- and InAs-based 2D electron gases for which the electron effective masses are low.

However, growth of materials with a (111) orientation is typically more …

Atomic Layer Processing Of Molybdenum Disulfide Thin Films, Jake Alan Soares

Boise State University Theses and Dissertations

As feature sizes in semiconductor devices continue to shrink, it is of upmost importance to synthesize materials that can accommodate the drastic degree of scaling. One such material receiving great attention is molybdenum disulfide (MoS₂), which is a semiconducting two-dimensional (2D) material in its most favorable few-layer form. The distinctive electrical properties make few to single-layer MoS₂ a potential candidate to replace silicon in many microelectronic devices. MoS₂ research is commonly conducted on mechanically exfoliated films due to the high quality, low defect layers that can be prepared. However, exfoliation is not a scalable method due …

Towards The Electronic Response Of Carbon-Based Van Der Waals Heterostructures In A Diamond Anvil Cell, George Thomas Foskaris

UNLV Theses, Dissertations, Professional Papers, and Capstones

The nanoscale regime of materials has been at the forefront of research and interest in condensed matter physics for many years. In a merger of the fields of two-dimensional (2D) materials and high pressure physics, we present an investigation of the electronic response of carbon-based, van der Waals (vdW) heterostructures in a diamond anvil cell (DAC). Combining these fields presents us with the ability to study the characteristics of such systems both optically, and through electrical transport. Properties such as conductance, band structure, and layer number are considered. The samples in this study are assembled using exfoliation and stacking techniques …

Enhancing The Performance Of Poly(3-Hexylthiophene) Based Organic Thin-Film Transistors Using An Interface Engineering Method, Eyob Negussie Tarekegn

All Dissertations

An original design and photolithographic fabrication process for poly(3-hexylthiophene-2, 5-diyl) (P3HT) based organic thin-film transistors (OTFTs) is presented. The structure of the transistors was based on the bottom gate bottom contact OTFT. The fabrication process was efficient, cost-effective, and relatively straightforward to implement. Current–voltage (I-V) measurements were performed to characterize the primary electronic properties of the transistors. The measured mobility of these transistors was significantly higher than most results reported in the literature for other similar bottom gate bottom contact P3HT OTFTs. The higher mobility is explained primarily by the effectiveness of the fabrication process in keeping the interfacial layers …

Hierarchical Structure And Material Integration For Electrocatalytic Co2 Reduction, Hamed Mehrabi

Graduate Theses and Dissertations

CO2 released by the combustion of fossil fuels is driving significant changes to the earth’sclimate. The natural cycle for removing CO2 from the atmosphere, namely photosynthesis, cannot keep up with the rate at which it is being added. Developing engineering approaches to remove CO2 from the atmosphere is becoming essential to reduce these effects. Removal leads to further issues of carbon sequestration and favorable CO2 reuse strategies, including the electrochemical transformation of recovered CO2 to useful products such as fuels and materials. Copper is an important electrocatalyst for the CO2 reduction reaction (CO2RR) because of its unique capability for producing …

A Study On Interactions Between Metal-Organic Frameworks And Biological Materials, Josh Phipps

Graduate Theses and Dissertations

Metal-organic frameworks or MOFs are an extremely useful tool in many areas of applications. Their popularity in recent years has arisen from their high efficiency in catalytic chemical reactions. This is made possible due to their porous interior and the ability of the MOFs components to be functionalized. These same traits make MOFs excellent for use in protein encapsulation or immobilization and have the potential to become excellent drug carriers. Their development in this utilization has been limited dramatically compared to MOFs chemical applications. This is due in part to the nature of biological processes taking longer to study, but …

Seeing The Big Picture: System Architecture Trends In Endoscopy And Led-Based Hyperspectral Subsystem Intergration, Craig M. Browning

Graduate Theses and Dissertations (2019 - present)

Early-stage colorectal lesions remain difficult to detect. Early development of neoplasia tends to be small (less than 10 mm) and flat and difficult to distinguish from surrounding mucosa. Additionally, optical diagnosis of neoplasia as benign or malignant is problematic. Low rates of detection of these lesions allow for continued growth in the colorectum and increased risk of cancer formation. Therefore, it is crucial to detect neoplasia and other non-neoplastic lesions to determine risk and guide future treatment. Technology for detection needs to enhance contrast of subtle tissue differences in the colorectum and track multiple biomarkers simultaneously. This work implements one …

Carbon Fibers From Bio-Based Precursors Derived From Renewable Sources, Sagar Kanhere

All Dissertations

Carbon fibers have the highest strength and modulus among all known fibers and are used as reinforcements in high-performance composites [1]. Carbon fibers also have a very low density relative to metals. Therefore, carbon fibers possess ultrahigh specific strength and modulus, which make them desirable for high-performance light-weight composites. A vast majority of commercial carbon fibers are produced from PAN precursors that are expensive, which limits the use of PAN-derived carbon fibers to aerospace applications (e.g., airplanes). However, for costsensitive applications, there is a need for low-cost, moderate performance carbon fibers. Lignin is a low-cost by-product of pulping and biorefining …

Active Rheological And Stiffening Control Of Cementitious Systems For Additive Manufacturing, Abdul Basit Peerzada

All Dissertations

Technological advancements and automation in the last two decades have made additive manufacturing of cementitious systems a reality. Among all the additive manufacturing techniques used for cementitious materials, layer-by-layer extrusion-based printing is the most used technique. For a layer-by-layer printing process, the requirements of cementitious materials vary from those of a conventional construction process. Typically, the cementitious materials are pumped to a print head using a positive-displacement pump. The pumpability of the cementitious material for a specific pumping system depends on its rheological properties. For effective pumping, the yield stress and plastic viscosity of a cementitious system should be low. …