Materials Science and Engineering Commons^™

Evaluation Of Stretch Film Behavior During Long-Term Storage Under Different Atmospheric Conditions, Kyle Dunno, Maria Symanski

Journal of Applied Packaging Research

This study examined the post-application behavior of two 20.3 micron machine stretch films, one categorized as high-performance and one as general-performance, for thirty days while stored at either 23°C or 38°C. For each film type, the stretch film was applied to a simulated unit load to produce neutral and positive applied total stretch scenarios. The relaxation curves developed from each test indicate the relaxation rate of the films varied based on the storage condition. Observed was an average of 41% containment loss for both high-performance and general-purpose films when the simulated loads were stored at 38°C. For simulated loads stored …

A Xanes Study Of Lithium Polysulfide Solids: A First-Principles Study, Qing Guo, Kah Chun Lau, Ravindra Pandey

Michigan Tech Publications, Part 1

X-ray absorption spectroscopy (XAS) is used for capturing the reaction mechanisms at the molecular level via the determination of local electronic configurations inside Li-S batteries. In this paper, a comprehensive investigation of the S K-edge X-ray absorption near-edge structure (XANES) of a series of stoichiometric lithium polysulfide solids was performed, assuming that these polysulfide solids are formed during the battery cycling process. The results based on density functional theory show that the pre-edge peak in the S K-edge XANES spectra is not a common feature in the solid phase in contrast to the case of pristine polysulfide molecules where the …

Analytical Model For Electromagnetic Induction In Pulsating Ferrofluid Pipe Flows, Huiyu Wang, John G. Monroe, Swati Kumari, Serhiy O. Leontsev, Erick S. Vasquez, Scott M. Thompson, Matthew J. Berg, Dibbon Keith Walters, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

No abstract provided.

Laser Surface Treatment And Laser Powder Bed Fusion Additive Manufacturing Study Using Custom Designed 3d Printer And The Application Of Machine Learning In Materials Science, Hao Wen

LSU Doctoral Dissertations

Selective Laser Melting (SLM) is a laser powder bed fusion (L-PBF) based additive manufacturing (AM) method, which uses a laser beam to melt the selected areas of the metal powder bed. A customized SLM 3D printer that can handle a small quantity of metal powders was built in the lab to achieve versatile research purposes. The hardware design, electrical diagrams, and software functions are introduced in Chapter 2. Several laser surface engineering and SLM experiments were conducted using this customized machine which showed the functionality of the machine and some prospective fields that this machine can be utilized. Chapter 3 …

Silk Fibroin Supraparticles Created By The Evaporation Of Colloidal Ouzo Droplets, Ashley Lamb, Fengjie He, Shengjie Zhai, Hui Zhao

Mechanical Engineering Faculty Research

Due to its high biocompatibility and biodegradability, supraparticles made from silk fibroin—produced from Bombyx mori (B. mori) cocoons—can find various applications in biomedical fields. The evaporation of Ouzo droplets by not requiring energy nor a surfactant is an environmentally friendly, easy, and cost-effective strategy to fabricate three-dimensional supraparticles, tackling the so-called “coffee ring effect” associated with droplet evaporation. Silk fibroins are dissolved into quaternary droplets, comprised of ultrapure water, ethanol, trans-anethole oil, and formic acid. The Ouzo droplet is able to form an oil ring that facilitates the droplet contraction to create a three-dimensional supraparticle. Using the Ouzo effect to …

Metal Oxide Nanoparticles Synthesized By Nonthermal Plasma For Electrochemical Applications, Qinyi Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

Metal oxide nanocrystals can be synthesized by colloidal processing and gas-phase processing routes. High-quality nanocrystals produced by colloidal routes typically have surface ligands. Transport of electrons and ions among nanocrystals is hindered by surface ligand, and degrades related electrical performance. Gas-phase processing, for example combustion and thermal plasma, can make free-standing nanocrystals. However, nanocrystals produced by combustion method are heavily agglomerated, which further limits the usage of nanoparticles in electrochemical applications. Nonthermal plasma, as an emerging attractive route, has been initially focused on the synthesis of elemental group IV materials, and extended to include the synthesis of multicomponent materials, such …

Novel Photothermal Materials And Thermally Engineered Membranes For Solar Desalination, Sisi Cao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Although 71% of earth surface is covered with water, more than 97% of it is saltwater, and freshwater is limited to only about 2.5%. The freshwater shortage has been exacerbated due to the environmental pollution, increased agriculture needs, socio-economic development, and population growth. Among various desalination technologies, membrane distillation has gained wide attention due to its ability to treat highly saline water utilizing waste heat from industrial processes. However, the implementation of conventional membrane distillation is hindered in the remote regions and disaster-struck communities where the low-grade thermal energy from industrial plants and electricity are not readily available. To address …

Flexible Electronics For Neurological Electronic Skin With Multiple Sensing Modalities, Haochuan Wan

McKelvey School of Engineering Graduate Student Theses & Dissertations

The evolution of electronic skin (E-skin) technology in the past decade has resulted in a great variety of flexible electronic devices that mimic the physical and chemical sensing properties of skin for applications in advanced robotics, prosthetics, and health monitoring technologies. The further advancement of E-skin technology demands closer imitation of skin receptors' transduction mechanisms, simultaneous detection of multiple information from different sources, and the study of transmission, processing and memory of the signals among the neurons. Motivated by such demands, this thesis focuses on design, fabrication, characterization of novel flexible electronic devices and integration of individual devices to realize …

Nucleation Studies In Barium Silicate Glasses And Soda-Lime Silicate Glass, Xinsheng Xia

McKelvey School of Engineering Graduate Student Theses & Dissertations

Controlling nucleation is key for the manufacture of glasses and glass-ceramics. It has been observed by different researchers in many silicate glasses that at low temperatures the critical work of cluster formation (i.e. the nucleation barrier) slowly rises rather than decreasing with decreasing temperature. However, this experimental observation is in contradiction with nucleation theories. In this dissertation, crystal nucleation was studied in BaO·2SiO2, 5BaO·8SiO2, and Na2O·2CaO·3SiO2 glasses. The main research topics include measurements of the nucleation rate, the structural evolution of the glass, and the low-temperature nucleation behavior. A special focus is given to the low-temperature nucleation anomaly. In total, …

Direct Activation Of Light Alkanes To Value-Added Chemicals Using Supported Metal Oxide Catalysts, Md Ashraful Abedin

LSU Doctoral Dissertations

One of the most challenging aspects of modern-day catalysis is the conversion of methane. Direct conversion of methane via dehydroaromatization (MDHA) is a well-known process which can produce valuable hydrocarbons. Mo oxide supported on ZSM-5/MCM-22 has been studied extensively in recent years for MDHA. Mo carbides are responsible for activating methane by forming CHx species. These are dimerized into C2Hy and oligomerized on ZSM-5/MCM-22 Brønsted acid sites to form aromatics. Sulfated zirconia (SZ) supported Mo catalyst contains the acid sites necessary to produce benzene in MDHA. Here, sulfated hafnia (SH), a homologous oxide like SZ, has been proposed to provide …

Martensitic And Inter-Martensitic Transformations In Magnetocaloric Ni2.15mn0.85ga Heusler Alloy, A. Madiligama, P. Ari-Gur, Y, Ren, V, Shavrov, Y. Ge, J. George, I. Musabirov, V. Koledov

Mechanical and Aerospace Engineering Faculty Publications

The entropy changes of successive martensitic phase transformations in Ni-Mn-Ga Heusler alloys can be utilized to realize enhanced magnetocaloric properties. A detailed study of phase transformations of one such alloy, Ni2.15Mn0.85Ga, (ΔQ = 4900 J/kg at 343 K, under 140 kOe), is reported here. Upon cooling, the paramagnetic cubic (L21) austenitic phase transforms into a ferromagnetic 7M modulated monoclinic martensitic phase. This phase is stable in a narrow temperature range, and upon further cooling, transforms into a non-modulated ferromagnetic tetragonal (L10) phase. The separation between the equilibrium temperatures of the austenitic and tetragonal martensitic phases is only ~50 K. The …

Findings Report: Virtual Workshop On ‘Resilient Supply Of Critical Minerals’, Marek Locmelis, Angela D. Lueking, Michael S. Moats, Kwame Awuah-Offei, Lana Z. Alagha, Mark W. Fitch, Alanna Krolikowski, Shelby Clark

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Executive Summary
On August 2-3, 2021, the Thomas J. O’Keefe Institute for Sustainable Supply of Strategic Minerals at Missouri University of Science and Technology (Missouri S&T) hosted the NSF-funded virtual workshop ‘Resilient Supply of Critical Minerals’. The workshop was convened via Zoom and attracted 158 registrants, including 108 registrants from academia (61 students), 30 registrants from government agencies, and 20 registrants from the private sector. Four topical sessions were covered:

A. Mineral Exploration and Source Diversification.
B. Supply Chain and Policy Issues.
C. Improving Mineral Recycling and Reprocessing Technologies.
D. Technological Alternatives to Critical Minerals.

Each topical session was composed …

Comparison Of Concrete And Steel Jacket Methods For Reinforcing A Concrete Bridge Pier By Numerical And Experimental Studies, Hadi Faghihmaleki

Makara Journal of Technology

Various rehabilitation and strengthening procedures have been developed in recent decades. A study to determine which methods can be implemented to increase the useful life of the bridge before strengthening must be performed. In this study, the seismic behavior of a reinforced concrete bridge pier with dimension 3.5 × 3.5 m, which was reinforced by two steel and a concrete jacket, was investigated. Nonlinear geometric models and materials were analyzed to estimate the seismic parameters of the pier. Results show an increase in energy absorption, ultimate strength, and ductility for the steel jacket, as well as a greater increase in …

Effect Of Arc Plasma Sintering On The Structural And Microstructural Properties Of Fe-Cr-Ni Austenitic Stainless Steels, Parikin Parikin, M. Dani, A. Dimyati, N. D. Purnamasari, B. Sugeng, M. Panitra, A. Insani, T. H. Priyanto, S. Mustofa, Syahbuddin Syahbuddin, A. Huang

Makara Journal of Technology

X-ray diffraction techniques were performed to determine the actual crystal structure of A2 austenitic stainless steel (ASS) as-cast and A2 ASS after arc plasma sintering (APS) for 2 s. Computations were conducted on the basis of the Bragg arithmetic formula by comparing the S2 arithmetic with the interplanar spacing. The Bragg arithmetic formula is a simple series for the determination of the crystalline phase of materials based on the Miller indices of cubic shapes or other shapes. A2 ASS as-cast was identified to have a crystal structure of face-centered cubic with lattice parameter a = 3.58 Å. A similar crystal …

Trend Significance Levels Of Rain Onset And Cessation And Lengths Of The Wet And Dry Seasons In Epe, Lagos State, Nigeria, Adekunle Adedeji Alli, Olorunwa Eric Omofunmi

Makara Journal of Technology

This study aims to reduce crop failure resulting from a dry spell, which is the first occurrence of unsustainable rainfall that deceives farmers into planting. Thus, trends need to be tested using hypothesis, kurtosis, and other statistics to analyze the risks associated with unstable planting calendars and their possible mitigation strategies. The daily rainfall data from 1982 to 2018 were obtained from the archive of NASA/POWER SRB/FLASH, and the research location is Epe, Lagos State, Nigeria, which lies at latitude 6.585° N and longitude 3.962° E. Microsoft Excel was used to perform the tests. Results show that the null hypothesis …

Kinetic Modeling Study Of Laminar Burning Velocity Of Gasoline–Ethanol–Methanol Blends At Elevated Temperature And Pressure, Ahmad Syihan Auzani, Cahyo Setyo Wibowo, Riesta Anggarani, Yulianto Sulistyo Nugroho, Bambang Sugiarto

Makara Journal of Technology

Gasoline–ethanol–methanol (GEM) blends have been considered to replace pure gasoline as spark ignition engine fuel. Their physical and chemical properties and performance and emission measurements from real engines have been reported previously. However, a fundamental study that can explain the unique results of GEM compared with those of pure gasoline is lacking. This study aims to compare the laminar burning velocity of GEM blends at different mixtures, equivalence ratios, temperatures, and pressures with that of pure gasoline. A laminar flame propagation model and reaction mechanisms from the literature were were for a numerical simulation. In this study, the chemical components …

Improvement Of Electrical Properties Of Cmc-Pva Doped With Various Contents Of Lino3 As An Application For Hybrid Polymer Electrolytes, Amalia Zulkifli, Norfatihah Mazuki, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried out with the development of hybrid polymer electrolytes (HPEs) by using carboxymethyl cellulose (CMC)–polyvinyl alcohol (PVA) doped with different contents of lithium nitrate (LiNO3) for the determination of their structural and conduction properties. The structural analysis was conducted by using Fourier transform infra-red spectroscopy and showed the interaction between the blend host polymer and ionic dopant, which formed via the coordinating site of CMC-PVA and Li+-NO3−. The complexes of CMC-PVA doped LiNO3 led to an increment in ionic conductivity, as observed by electrical impedance spectroscopy, and the sample containing 20 wt% LiNO3 obtained the highest …

Music Information Retrieval Based On Active Frequency, Hardianto Wibowo, Wildan Suharso, Yufis Azhar, Galih Wasis Wicaksono, Agus Eko Minarno, Dani Harmanto

Makara Journal of Technology

Music is the art of combining frequencies. A balance of frequencies gives rise to a harmonious tone. Several features of music can be analyzed, and they include sociocultural background, lyrics, mood, tempo, rhythm, harmony, melody, timbre, and instrumentation. In this study, we use the frequency of instrumentation as a feature for classification because each instrument has a frequency range. To test this frequency range, we use five music genres and one music playing skill. The five genres are dangdut, electronic dance music (EDM), metal, pop/rock, and reggae. The music playing skill is acoustic. Active frequencies are tested using the k-nearest …

Predictive Delivery Man Assignment Problem Using Deep Learning, Rahmadini Payla Juarsa, Taufik Djatna

Makara Journal of Technology

Dispatching is a critical part in current online shopping. It relates to how the delivery man assignment should minimize cost along with the service from a source to an end customer with an appropriate scheduled time. The problem arises as neither enough products to deliver nor delivery men are available for dispatch, resulting in suboptimal service and a waste of money. The study aimed to formulate the cost of restaurant dispatching for inducing a deep learning-based solution with the gated recurrent unit recurrent neural network to receive hourly order data and to engage the result for near feature delivery man …

Amorphous Silica Based Biomaterials For Musculoskeletal Tissue Regeneration Applications, Kamal Awad

Material Science and Engineering Dissertations - Archive

Musculoskeletal (MSK) injury includes any injuries that affect the bones, muscles, ligaments, tendons, or nerves. Open bone fracture is one of the common types of MSK traumatic injuries which results in not only bone fracture but also damage/loss of associated muscles, nerve, vasculature, endothelium, periosteum, fascia, and connective tissue. Surgical procedures and biological interventions are required to fix the broken bone, and muscle transfer is performed to compensate the skeletal muscle defects. Current treatments include fixative metal implants and regenerative biopolymer scaffolds, then muscle flap procedures to cover the bone. Yet, these treatments are inadequate because the used materials do …

Surface Modification Of Titanium By Electrolytic Plasma Processing And In-Vitro Studies, Wisanu Boonrawd

Material Science and Engineering Dissertations - Archive

Electrolytic plasma processing (EPP) can be operated in two modes, namely plasma electrolytic saturation (PES) and plasma electrolytic oxidation (PEO). In this study, the PES was used to create hydrophilic surface profiles on titanium (Ti). The wettability, surface morphology characteristics and chemical composition of the treated samples were studied as a function of PES processing parameters. The PES profiled surfaces comprised of a characteristic “hills and valleys” morphology because of continuous surface melting and freezing cycles. A bimodal surface profile was produced with 2-3 µm height hills and valleys with nano-roughness (= 200 nm). The produced profile resulted in a …

Development Of Eam And Rf-Meam Interatomic Potential For Zirconium Diboride, Bikash Timalsina

Graduate Theses/Dissertations

Embedded Atom Method (EAM) and Modified-EAM (MEAM) interatomic potentials were developed for zirconium diboride (ZrB₂). The EAM and “Reference Free” (RF) version of the Modified Embedded Atom Method (RFMEAM) potentials have been fitted by utilizing Density Functional Theory (DFT)-based datasets including lattice deformations and high-temperature ab-initio molecular dynamics (AIMD) simulation results. The occupancies of phonons for acoustic phonon modes from the density functional theory calculation shows that these modes of vibration, mostly due to heavier mass element (Zr), which occur below 8.711 THz, while a slight underestimation to that of DFT calculation predicted by EAM below 8.439 THz …

Durability And Damage Analysis Of Hybrid Multiscale Composites, Suma Ayyagari

Doctoral Dissertations and Master's Theses

In this dissertation, an effort was carried out to enhance the mechanical performance of fiber reinforced composites (FRPs) by modification of the fibers’ surface morphologies. The effects of various surface alterations of a plain-woven carbon fiber fabric surface, on the fiber/epoxy interface were investigated. The alterations were mostly achieved by growing different nanofillers like zinc oxide nanorods (ZnO NR), carbon nanotubes (CNTs), and metal organic frameworks (MOFs) on the fiber surface. While the growth techniques for ZnO NR and CNTs place restrictions on the size of the fabricated composites, MOFs route is uniform, affordable, and can be readily scaled up …

Mixed Metal Oxide Nanowires Via Solid State Alloying., Veerendra Atla

Electronic Theses and Dissertations

Mixed metal oxide materials with composition control find applications in energy conversion and storage processes such as heterogenous catalysis, photoelectrochemical catalysis, electrocatalysis, thermal catalysis, and lithium-ion batteries. Mixed metal oxides and/or complex oxides with composition control and in one-dimensional form as nanowires could be interesting to various catalysis applications due to control on single crystal surfaces, active sites, acidity versus basicity site density, and oxygen vacancies. The major challenge is to synthesize mixed metal oxide nanowires beyond binary oxides with composition control. In this dissertation, solid state alloying of binary oxide nanowires with solid and liquid precursors is studied to …

Rapid Annealing Of Perovskite Solar Cell Thin Film Materials Through Intense Pulse Light., Amir Hossein Ghahremani

Electronic Theses and Dissertations

Perovskite solar cells (PSCs) have garnered a great attention due to their rapid efficiency improvement using cheap and solution processable materials that can be adapted for scalable high-speed automated manufacturing. Thin film perovskite photovoltaics (PVs) are typically fabricated in an inert environment, such as nitrogen glovebox, through a set of deposition and annealing steps, each playing a significant role on the power conversion efficiency (PCE), reproducibility, and stability of devices. However, atmospheric processing of PSCs would achieve lucrative commercialization. Therefore, it is necessary to utilize materials and methods that enable successful fabrication of efficient PSCs in the ambient environment. The …

Microstructure And Microchemistry Of Laser Welds Of Irradiated Austenitic Steels, Yaqiao Wu, Megha Dubey

Materials Science and Engineering Faculty Publications and Presentations

This article investigates the integrity of laser welds on neutron irradiated, He-containing steels. Life extension of the current fleet of light water reactors could necessitate repair of cracks on irreplaceable internal components, but heat input of weld repairs exacerbates the problem by initiating He-induced cracking. Laser welding is a promising low-heat-input technology thought to limit the extent of He-induced cracking. In this study, we produce laser welds in a hot cell on AISI 304L stainless steel plates previously irradiated in the Experimental Breeder Reactor (EBR)-II. We select a systematic set of three specimens spanning fluences ~1–28 displacements per atom (dpa) …

Application Of In Situ And Ex Situ Characterization Of Atomic Layer Deposition Processes For Gallium Phosphide And Sodium Fluoride, Sara Rose Kuraitis

Boise State University Theses and Dissertations

Atomic layer deposition (ALD) is a vapor deposition technique for synthesizing thin films with nanometer thickness control. ALD films are deposited on a substrate surface in a cyclic layer-by-layer fashion utilizing alternating doses of highly reactive chemical precursors. Precursors are selected to undergo self-limiting chemical reactions with the surface, and desired film thickness is achieved by varying the number of ALD cycles accordingly. Optimization of ALD process parameters and precursor chemistry enables conformal coating of arbitrary substrate geometries, including high aspect ratio features such as trenches. In the decades since its introduction, ALD has been used for applications across many …

Computational Modeling Towards Accelerating Accident Tolerant Fuel Concepts And Determining In-Pile Fuel Behavior, Ember Sikorski

Boise State University Theses and Dissertations

To mitigate global warming, we need to develop carbon-free ways to generate power. Nuclear energy currently generates more carbon-free power in the United States than all other sources combined at 55%. To make nuclear as viable a power source as possible, we need to maximize power density and safety. Both of these can be improved with Accident Tolerant Fuel (ATF) materials. Uranium nitride (UN), a candidate ATF material, offers high fuel economy due to its uranium density and improved safety margins from thermal properties. However, its instability in the presence of water, a reactor coolant, must be addressed. This dissertation …

Toward An Understanding Of Fundamental Mechanisms In Transitional And Turbulence Flow Control, Ethan A. Davis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Turbulence is an emergent phenomenon found throughout nature and engineering, alike. It plays a vital role in the aquatic locomotion of organisms, scalar mixing, fluid transport, shipping and transportation, and even the flow of biological fluids in the human body. Therefore, it is of utmost importance in both a practical and engineering sense to better understand turbulence with the goal of better controlling it. This dissertation focuses broadly on better understanding the underlying mechanisms behind wall-bounded turbulent flows, with an emphasis on exploiting those mechanisms for turbulence flow control.

We developed a numerical simulation to study the effect of slip …

Development Of A Mash Tl-3 Compliant Parapet Mounted Fence, Luis Rodriguez Alvizo

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

When roadways pass over railway tracks, there is a risk that debris from the roadway or pedestrians may fall onto the tracks and interfere with railway operations. Because of this, state Departments of Transportation (DOTs) commonly install debris fences in conjunction with bridge rails over railway tracks. However, the safety performance of debris fence systems when impacted by an errant vehicle has not been demonstrated through full-scale crash testing. Thus, the objective of this research was to develop a new, parapet-mounted debris fence for the Iowa DOT according to safety performance guidelines included in the American Association of State Highway …