Materials Science and Engineering Commons^™

Mechanical And Microstructure Characteristics Of Concrete-Mixtures Designed For Durability Of Rc-Structures In Corrosive Environment, Saeid A. Alghamdi Dr., S. Ahmad, M. M. Khaled

International Conference on Durability of Concrete Structures

As exposures to chloride-salts are known as prime factors causing initiation and continuity of corrosion-process of steel reinforcement bars in reinforced concrete (RC) structures, it has always been a major concern for designers considering the requirements of structural-durability for targeted-service life of RC-structures in aggressively corrosive environments typically prevalent in coastal regions. Research works previously reported by the researchers have modeled corrosion-process in terms of corrosion-current density, and it was realized that concrete-mixtures design quality and characteristics, degree of exposures to corrosive-agents such as chloride salts, and protective-concrete cover-thickness are now known beyond doubt to be determinant factors as regards …

Experimental And Numerical Investigation On The Irregularity Of Carbonation Depth Of Concrete Under Supercritical Condition, Hao Bao Masc, Min Yu Dr., Jianqiao Ye Dr., Lihua Xu Dr., Yin Chi Dr., J Ye

International Conference on Durability of Concrete Structures

The heterogeneity of a cement-based material results in a random spatial distribution of carbonation depth, which may significantly affect the mechanical properties and durability of the material. Currently, there is a lack of both experimental and numerical investigations aiming at a statistical understanding of this important phenomenon. This paper presents both experimental and numerical supercritical carbonation test results of concrete blocks. The random fields of porosity and two-dimension random aggregate model of concrete were proposed for the simulation. The carbonation depths are measured and distributed along the carbonation boundary by the proposed rapid image processing technique, which are then statistically …

Guiding Principles In Developing The South African Approach To Durability Index Testing Of Concrete, Yunus Ballim, Mark Alexander

International Conference on Durability of Concrete Structures

Focused thinking on the possibility of early-age testing of concrete for long-term durability started in earnest during the late 1980’s in South Africa. Through sustained research, development and trial implementation on construction projects, three durability index (DI) tests have emerged, two of which have been adopted as national standard test methods for concrete construction, the remaining one being prepared a national standard. In this paper we review the guiding or foundational principles that directed the development of these DI tests, with a view to assessing the appropriateness and relevance of these guiding principles to modern concretes. The last 30 years …

The Effect Of Calcium Nitrate On The Hydration Of Calcium Aluminate Cement At Different Curing Temperatures, Hongxia Wang, Guizhi Diao, Guanghua Liu, H Wang, Lixiong Gao, Guangwei Liu

International Conference on Durability of Concrete Structures

Phase conversion in calcium aluminate cements (CAC) induces significant volumetric instability; it would result in an increase in porosity and decrease in strength in CAC. In this study, calcium nitrate (CN) as a phase conversion inhibitor, the effect of CN on the hydration of CAC at different curing temperatures was studied. Xray diffraction, thermal analysis, SEM, isothermal calorimetry and the compressive strength were conducted on the CAC dosages of 0%, 5%, 10% and 15%CN cured at 20�, 30�, 40� and 50�. The results show CN can retard CAC hydration, alter the characters of the hydrates of CAC systems and avoid …

The Influence Of Waste Glass Powder On The Chloride Binding Capacity Of Fly Ash/Cement Hardened Paste, Jh Yan, Tingyu Hao

International Conference on Durability of Concrete Structures

The potential of using waste glass powder to increase the chloride binding capacity of fly ash/cement hardened paste was investigated. When only fly ash replacing cement, the chloride binding capacity was raised within 28d when the fly ash replacement level was in the range from 30-50% by mass. But at a longer age of 60 to 90d, the binding performance was increased at the replacement level of 10-30wt%. The chloride binding capacity of glass powder-fly ash-cement system was increased by adding glass powder of 2% and 4% by mass at 7d while those at larger addition and longer age reduced. …

Alkali Reactive Carbonate Rocks: Is It Alkali Silica Reaction (Asr) Or Alkali Carbonate Reaction (Acr)?, Mengesha Beyene, Rc Meininger

International Conference on Durability of Concrete Structures

The root cause of distress in two different concrete structures made from carbonate coarse aggregates that fit the textural and compositional criteria cited for ACR was found to be caused by ASR, not ACR. Stereo-optical examination and transmitted polarized light microscopy (PLM) analysis showed that the concretes contain some dark gray, fine-grained argillaceous dolomitic coarse aggregates in which secondary white deposit filling the cracks extending from these aggregates into the paste (as well as lining air voids) is ASR gel. Back scattered electron (BSE) imaging with EDS spectra and x-ray elemental mappings, clearly confirm that the white secondary deposits consist …

An Investigation Of High-Speed Consolidation And Repair Of Carbon Fiber - Epoxy Composites Through Ultrasonic Welding, David A. Hoskins

LSU Master's Theses

Adhesive repair of carbon fiber composite structures is commonly done on damaged structures to extend the service life. This method requires careful preparation of the damaged surface with intricate steps to ensure good bonding between the repair patch and the parent structure by means of an adhesive film. As with many forms of composite manufacturing, it is required to perform vacuum bagging, debulking, and a heated cure depending on the resin. All these steps make the repair process costly and time consuming.

In this present work, an alternative method of repair is investigated which explores the experimental feasibility of using …

Grain Refinement In Iron-Based Materials, Simon Naumovich Lekakh, Von Richards, Ronald J. O'Malley, Jun Ge

Materials Science and Engineering Faculty Research & Creative Works

A process for manufacturing an iron-based alloy comprising forming targeted fine oxide and/or carbide dispersoids in a melt, and sequentially precipitating transition-metal nitrides on the dispersoids for heterogeneous nucleation of equiaxed grains. An iron-based cast alloy having a highly equiaxed fine grain structure.

A Parametric Study For In-Pile Use Of The Thermal Conductivity Needle Probe Using A Transient, Multilayered Analytical Model, Courtney Hollar, Austin Fleming, Kurt Davis, Ralph Budwig, Colby Jensen, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

By utilizing an in-pile measurement, thermal conductivity can be determined under prototypic conditions over a range of burnup. In this work we develop a multilayer quadrupoles analytical model to describe the transient thermal interactions between a line heat source (i.e. needle probe) and cylindrical nuclear fuel geometry for inpile thermal conductivity measurements. A finite element analysis of the detailed needle probe geometry was compared to results from the analytical model to verify the assumptions made in the analytical model. Experimentally, the needle probe was used to measure the thermal properties of polytetrafluoroethylene (PTFE) and stainless steel 304 with three different …

Utilizing A Single Silica Nanospring As An Insulating Support To Characterize The Electrical Transport And Morphology Of Nanocrystalline Graphite, David Estrada, Paul H. Davis, Twinkle Pandhi

Materials Science and Engineering Faculty Publications and Presentations

A graphitic carbon, referred to as graphite from the University of Idaho thermolyzed asphalt reaction (GUITAR), was coated in silica nanosprings and silicon substrates via the pyrolysis of commercial roofing tar at 800 °C in an inert atmosphere. Scanning electron microscopy and transmission electron microscopy images indicate that GUITAR is an agglomeration of carbon nanospheres formed by the accretion of graphitic flakes into a ~100 nm layer. Raman spectroscopic analyses, in conjunction with scanning electron microscopy and transmission electron microscopy, indicate that GUITAR has a nanocrystalline structure consisting of ~1–5 nm graphitic flakes interconnected by amorphous sp³ bonded carbon. …

Inas(111)A Homoepitaxy With Molecular Beam Epitaxy, Kevin D. Vallejo, Trent A. Garrett, Kathryn E. Sautter, Kevin Saythavy, Baolai Liang, Paul J. Simmonds

Materials Science and Engineering Faculty Publications and Presentations

The authors have established a robust set of growth conditions for homoepitaxy of high-quality InAs with a (111)A crystallographic orientation by molecular beam epitaxy (MBE). By tuning the substrate temperature, the authors obtain a transition from a 2D island growth mode to step-flow growth. Optimized MBE parameters (substrate temperature = 500 °C, growth rate = 0.12ML/s, and V/III ratio ≥ 40) lead to the growth of extremely smooth InAs(111)A films, free from hillocks and other 3D surface imperfections. The authors see a correlation between InAs surface smoothness and optical quality, as measured by photoluminescence spectroscopy. This work establishes InAs(111)A as …

Fabrication And Characterization Of Electrical Energy Storage And Harvesting Energy Devices Using Gel Electrolytes, Belqasem Aljafari

USF Tampa Graduate Theses and Dissertations

Redox-active materials in the bulk of gel electrolytes are unquestionably holding the primary roles in developing energy harvesting and storage technology. Both technologies are necessary in order to cope with the current challenges of the environmental crises of global warming and finite non-renewable sources while the demand for energy modern societies have been speedily increased. One of the most challenges of making a hybrid device of energy conversion and storage is the cost of the fabrication process. Therefore, gel electrolyte-based materials with redox-active properties can potentially be a promising solution to improve the performance of electrochemical and photoelectrochemical devices for …

Contamination Of Coupling Glass And Performance Evaluation Of Protective System In Vacuum Laser Beam Welding, Yongki Lee, Jason Cheon, Byung-Kwon Min, Cheolhee Kim

Mechanical and Materials Engineering Faculty Publications and Presentations

Vacuum laser beam welding enables deeper penetration depth and welding stability than atmospheric pressure laser welding. However, contaminated coupling glass caused by welding fumes in the vacuum space reduces laser transmittance, leading to inconsistent penetration depth. Therefore, a well-designed protective system is indispensable. Before designing the protective system, the contamination phenomenon was quantified and represented by a contamination index, based on the coupling glass transmittance. The contamination index and penetration depth behavior were determined to be inversely proportional. A cylindrical protective system with a shielding gas supply was proposed and tested. The shielding gas jet provides pressure-driven contaminant suppression and …

From Critical Behavior To Catastrophic Runaways: Comparing Sheared Granular Materials With Bulk Metallic Glasses, Alan A. Long, Dmitry Denisov, Peter Schall, Todd C. Hufnagel, Xiaojun Gu, Wendelin J. Wright, Karin A. Dahmen

Faculty Journal Articles

The flow of granular materials and metallic glasses is governed by strongly correlated, avalanche-like deformation. Recent comparisons focused on the scaling regimes of the small avalanches, where strong similarities were found in the two systems. Here, we investigate the regime of large avalanches by computing the temporal profile or “shape” of each one, i.e., the time derivative of the stress-time series during each avalanche. We then compare the experimental statistics and dynamics of these shapes in granular media and bulk metallic glasses. We complement the experiments with a mean-field model that predicts a critical size beyond which avalanches turn into …

Sorption Of Benzene, Toluene, Ethylbenzene And Different Ratios Of Mixture Solvent By Plasticized Pema Films Using A Qcm Sensor, Xinpeng Li

USF Tampa Graduate Theses and Dissertations

VOCs (volatile organic compounds) can cause great harm to human health especially benzene, toluene and ethylbenzene. In this work a Quartz Crystal Microbalance (QCM) sensor with a polymer/plasticizer film was developed to quantify the VOCs both in air and water. QCM is an acoustic wave sensor that can be used well in detecting the aromatic compounds in the film. Because more than one VOC is present in the air, this thesis focuses on finding the sorption of different ratios of VOCs (benzene, toluene, ethylbenzene) using a polymer/plasticizer film in QCM. Poly (ethyl methacrylate) (PEMA) was used as the polymer because …

Extrusion Of Perovskite Oxide/ Silica Composites For Thermochemical Carbon Dioxide Conversion, Qian Li

USF Tampa Graduate Theses and Dissertations

In order to solve the increasing greenhouse effect problem, perovskite-type oxides have been used to convert CO2 to CO in a reverse water-gas shift chemical looping (RWGS-CL) process. Currently, the process is at the micro-reactor scale and used catalyst in powder form. However, formed materials are needed if the scale is to be increased.

Our research focus is on increasing the conversion yield of perovskite oxides with SiO2 support and scaling up the powder form perovskite-type oxides to pellet by extrusion. The binder added during the extrusion process must be removed to avoid affecting the performance of the catalyst and …

Double-Sided Corrugated Composite Tube And Axle Protective Mechanism For Railway Vehicles, Hozhabr Mozafari

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Structural elements in transportation vehicles are exposed to different types of dynamic loadings and impact scenarios. Protecting passengers against injury and providing mechanisms to avoid impact induced damages to the critical components are the two hot topics in crashworthiness engineering. The presented research work includes two parts. The first part is about designing a novel double-sided composite corrugated tube that can be implemented in front chassis rail of ground vehicles to improve their crashworthiness against collision and car accidents. To maximize the controllable energy absorption of corrugation troughs as observed in the single sided corrugated (SSC) tube, we proposed and …

Thermo-Oxidative Degradation Of Hdpe Geomembranes: Effect Of Phenolic Antioxidant And Hindered Amine Light Stabilizer Concentrations, Yasin Kocak

USF Tampa Graduate Theses and Dissertations

High density polyethylene (HDPE) geomembrane is most common geomembrane which is mainly used for civil engineering applications. However, HDPE geomembrane loses its properties under oxidative degradation progress. This study aims to assess geomembranes which have different percentage of phenolic antioxidant and hindered amine light stabilizer (HALS) with under the six months of the thermal-oxidative degradation. The interactions between phenolic antioxidant, HALS and carbon black can affect the mechanical, physical and chemical properties. To monitor these properties, Differential Scanning Calorimetry (DSC), Fourier-transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy coupled with Energy Dispersive X-ray spectroscopy (SEM/EDX), Melt Index tests, …

Development Of A Technology For Producing A Gel Composition For The Treat-Ment Of An Allergy Complicated By Fungal Infection, Filatova Albina Vasilevna, Turaev Abbaskhan Sabirkhanovich, Djurabaev Djalol Turgunbaevich

CHEMISTRY AND CHEMICAL ENGINEERING

The results of the development of the technology of the combined external drug for the treatment of allergies compli-cated by fungal infection are given. The rheological properties of the gel composition were studied in comparison with the similar preparation Fenistil gel, it was shown that the dynamic viscosity of the drug is 4.1 Pa·s, the active components (diphenylhydramine, fluconazole, Timoptin) do not destroy the structure of the gel base. A technological and instrumental scheme for the production of the drug has been developed.

Properties Of Model Rubber Compounds With Modified Angren Kaolin, Vapaev Murodjon Dusummatovih, Teshabaeva Elmira Ubaydullaevna, Ibadullaev Ahmadjon

CHEMISTRY AND CHEMICAL ENGINEERING

As a result of studies, the effect of modified Angren kaolin on the properties of elastomeric compositions based on synthetic polyisoprene and oil-filled styrene-butadiene rubbers were revealed. Plastoelastic and relaxation properties, as well as resistance to scorching and vulcanization kinetics of rubber compounds with traditional and modified Angren kaolin, were determined. The relationship of the elastic-strength properties of vulcanizates with the type and quantitative content of the modified Angren kaolin used is established.

Proppant For Use In Hydraulic Fracturing To Stimulate A Well, Thomas Lee Robl, Anne Elizabeth Oberlink

Center for Applied Energy Research Faculty Patents

A proppant for use in hydraulic fracturing to stimulate a well is provided. The proppant is fly ash particles having a mean particle size (d50) of between 45 μm and 150 μm and a size distribution defined by (d10) ≤ 5 μm and (d98) ≤ 250 μm.

Progress In Solar Photocatalytic Hydrogen Production, Zhi Wu, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

With the rapid development of human society and dramatically consumption of traditional energy, energy shortage and environmental pollution have become an important factor restricting the sustainable development of human society. At present, the development of clean and environmentally friendly renewable energy system has drawn much attention and becomes an important priority stratagem in the world. In many green and sustainable new energy projects, semiconductor-based photocatalytic hydrogen production technology which utilizes the available clean and renewable solar energy to prepare clean hydrogen energy is excepted to solve the crisis of energy shortage and environmental pollution, has become one of the most …

Nickel Selenide Derived From [Ni(En)3](Seo3) Complex For Efficient Electrocatalytic Overall Water Splitting, Dan-Dan Chen, Xue-Qing Gao, Hong-Fei Liu, Wei Zhang, Rui Cao

Journal of Electrochemistry

Electrocatalytic water splitting is considered as a promising technology for renewable energy. The development of efficient, stable, cost-effective, and bifunctional catalysts for both water reduction and oxidation has continued to face significant challenges. Herein, we report a robust and highly active nickel selenide (NiSe) spheres grown on carbon cloth (CC) by electrodeposition from a nickel selenite complex which is a single source containing both Ni and Se. A combination of two chemicals containing, separately, Ni and Se is used in traditional preparations of metal selenides, causing possible problems in the uniformity of the products. The as-prepared NiSe-EA/CC electrode exhibited electrocatalytic …

Special Issue: Electrocatalysis And Fuel Cells, Shuangyin Wang

Journal of Electrochemistry

/

A Facile Route To Synthesize Pt-Wo3 Nanosheets With Enhanced Electrochemical Performance For Her, Peng-Jie Jiang, Yi Lv, Chang-Miao Chen, Hong-Cheng He, Yong Cai, Ming Zhang

Journal of Electrochemistry

Platinum-tungsten trioxide (Pt-WO₃) nanosheets were synthesized on nickel foams (NFs) directly. As great conductive networks, NFs substrates could greatly improve the electrode performance of WO₃. The modified platinum nanoparticles not only enhanced the electron transformation of catalysts, but also increased the active sites for hydrogen evolution reaction (HER). Pt-WO₃/NF revealed a better catalytic activity than WO₃/NFs with a smaller Tafel slope (80 mV·dec^-1) and a lower overpotential of 72 mV at the current density of 10 mA·cm^-2. In addition, Pt-WO₃/NF showed great durability and stability during …

Three-Dimensional Porous Vn Octahedron Catalyst With High Electrocatalytic Efficiency Toward Hydrogen Evolution Reaction, Can Yin, Wei-Wei Fu, Ling Fang, Shi-Li You, Hui-Juan Zhang, Yu Wang

Journal of Electrochemistry

With the rapid development of China’s economy, the demand for energy is increasing, and environmental problems are becoming more and more serious. The development and utilization of highly-clean new energy fuel can effectively alleviate the energy crisis and environmental pollution. Nowadays, exploring high-efficiency, environment-friendly and low-cost catalysts remains the focus of research in the hydrogen evolution reaction (HER). In this research, firstly, we proposed a three-dimensional porous vanadium nitride (VN) with octahedral structure, which was prepared by a calcination treatment method. The VN catalyst showed a good electrocatalytic activity toward HER, involving a small overpotential of 94.0 mV at -10 …

Influences Of Morphology And Nitrogen Doping On The Electrocatalytic Characteristics For Oxygen Reduction Reaction Of Nio/Rgo, Dong Liang, Heng-Yi Fang, Shuo Yao, Jie-Mei Yu, Zhao-Liang Zhang, Zhan-Kun Jiang, Xue-Ping Gao, Tai-Zhong Huang

Journal of Electrochemistry

In this research, the reduced graphene oxide (rGO) supported sheet-like NiO (NiO/rGO) and spherical-like NiO (NiO/N-rGO) catalysts for oxygen reduction reaction (ORR) were prepared. The structures, morphologies and chemical states of the two catalysts were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The electrochemical catalytic performance of the two catalysts for ORR were investigated by cyclic voltammetry (CV), Tafel, linear sweeping voltammetry (LSV), rotating disc electrode (RDE) and rotating ring disc electrode (RRDE) tests. Electrochemical results showed that the current density and onset potential (about 0.89 V) …

Preparation Of Nanostructural Mno-Porous Graphene Hybrid Material By Thermally-Driven Etching Of Mno For Lithium-Air Batteries, Juan Yang, Jun-Wei Lang, Peng Zhang, Bao Liu

Journal of Electrochemistry

In this paper, improving the surface morphology of graphene(GNSs) as designed concept. we describe a MnO/porous-graphene(MnO-PGNSs) was synthesized by a simple site-localized Mn²⁺ on GO (Mn-GO) by charge adsorption and then driving by high-temperature calcination, growing MnO nanoparticles and etching GNSs achieved on step. And Then focus on the key factors of influenced the etch hole formation are analyzed, founded the dispersion of Mn-GO; layer number of GO and calcination temperature also affected the formation of holes. In addition, the MnO-PGNSs as lithium-air battery cathode exhibits high reversible capacity compared with GNSs and PGNs and it is able to …

Investigations In Electrochemical Thermodynamic And Kinetic Properties Of As-Cast And As-Quenched Cemg10Ni2 Hydrogen Storage Alloys, Feng Hu, Li-Rong Luo, Yong-Zhi Li, Ting-Ting Zhai, Xin Zhao, Yang-Huan Zhang

Journal of Electrochemistry

In order to improve the electrochemical hydrogen storage properties of CeMg₁₀Ni₂ alloy, the rapid quenching technology was used to prepare CeMg₁₀Ni₂ alloys with nano-crystalline and amorphous structure. The microstructures of as-cast and as-spinning sample were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The electrochemical hydrogen storage properties were investigated by an automatic galvanostatic charging/discharging, high rate discharging (HRD), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. The results revealed that the as-cast alloy was composed of multiphase structures. The as-quenched alloys were made up of nano-crystalline and/or amorphous structures, and the …

Pd Nanoparticles Supported On The Etched Ni Foams As High-Performance Electrocatalysts For Direct Ethanol Fuel Cells, Chi Zhang, Cheng-Fei Li, Gao-Ren Li

Journal of Electrochemistry

The development of non-Pt anode electrocatalysts with high activity and long-term durability at low cost for fuel cells still remains enormous challenge. Here we report the Pd nanoparticles supported on Ni foams etched by the mixed acids (HNO₃+H₂SO₄+H₃PO₄+CH₃COOH) (Pd/ME-NF) that are designed and fabricated as high-performance electrocatalysts for ethanol oxidation in alkaline media. Because of the advantages of large open space, fast electrolyte penetration/diffusion and rapid electron transfer process, the Pd/ME-NF catalysts exhibited significantly improved electrocatalytic activity and durability compared with the commercial Pd/C catalysts.