Materials Science and Engineering Commons^™

A Displacement Controlled Fatigue Test Method For Additively Manufactured Materials, Mohammad Masud Parvez, Yitao Chen, Sreekar Karnati, Connor Coward, Joseph William Newkirk, Frank W. Liou

Materials Science and Engineering Faculty Research & Creative Works

A novel adaptive displacement-controlled test setup was developed for fatigue testing on mini specimens. In property characterization of additive manufacturing materials, mini specimens are preferred due to the specimen preparation, and manufacturing cost but mini specimens demonstrate higher fatigue strength than standard specimens due to the lower probability of material defects resulting in fatigue. In this study, a dual gauge section Krouse type mini specimen was designed to conduct fatigue tests on additively manufactured materials. The large surface area of the specimen with a constant stress distribution and increased control volume as the gauge section may capture all different types …

Infrared Glass–Ceramics With Multidispersion And Gradient Refractive Index Attributes, Laura Sisken, Myungkoo Kang, Johann M. Veras, Charmayne Lonergan, Andrew Buff, Anupama Yadav, Devon Mcclane, Cesar Blanco, Clara Rivero-Baleine, Theresa S. Mayer, Kathleen A. Richardson

Materials Science and Engineering Faculty Research & Creative Works

Infrared (IR) glass–ceramics (GCs) hold the potential to dramatically expand the range of optical material solutions available for use in bulk and planar optical systems in the IR. Current material solutions are limited to single- or polycrystalline materials and traditional IR-transparent optical glasses. GCs that can be processed with spatial control and extent of induced crystallization present the opportunity to realize an effective refractive index variation, enabling arbitrary gradient refractive index elements with tailored optical function. This work discusses the role of the parent glass composition and morphology on nanocrystal phase formation in a multicomponent chalcogenide glass. Through a two-step …

Ionic Conductivity Behavior By Activated Hopping Conductivity (Ahc) Of Barium Aluminoborosilicate Glass–Ceramic System Designed For Sofc Sealing, M. J. Da Silva, W. M. Pontuschka, J. F. Bartolomé, P. Jasinski, J. Karczewski, Signo Tadeu Dos Reis

Materials Science and Engineering Faculty Research & Creative Works

Non-conducting BaO-B₂O₃ -Al₂O₃ -SiO₂ parent glasses designed for solid oxide fuel cell (SOFC) sealing applications were prepared using the melt-quenching technique. The glass formation region was determined according to phase equilibrium relations and was found to be in the composition range 70BaO-(x) Al₂O₃ -(10−x) B₂O₃ -₂₀SiO₂ where 3.0 < x < 6.0 wt.%. The conductivity values obtained conductivity ranged from 10 −5 to 10 −10 S/cm at temperatures between 600 and 850 °C. The batch compositions presented a threshold of dc conductivity near 70BaO wt% with a quasi linear behavior with the decrease of the BaO content. Different values of conduction activation energy were observed at temperatures above the glass transition temperature (T g ) (up to 700 °C), which were attributed to the thermal bond-breaking of non-bridging oxygen (NBO) defects. The experimental results of the electrochemical characterization by impedance spectroscopy of glass–ceramic interfaces with yttria-stabilized zirconia (YSZ) acting as solid ionic conductor electrolyte are presented and discussed.

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Publications

This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that locally produced UHPC has excellent mechanical and durability properties. UHPC has also been shown to have good bonding …

Disaster Resilient And Self-Assessing Multifunctional Transportation Structures, Ibrahim Karaman, Darren Hartl

Data

Corresponding data set for Tran-SET Project No. 18STTAM02. Abstract of the final report is stated below for reference:

"This research designs and characterizes multifunctional materials, in particular inexpensive shape memory alloys, for transportation structures that possess excellent mechanical properties and self-sensing capabilities for strengthening and health monitoring. The properties are the Fe-SMAs are sensitive to part size in that the grain size of the material, which can be grown to several inches, should exceed the smallest dimension of the part. In the current work, maximum part size of the large dimension Fe-SMA rods were determined through detailed microstructural investigations. Samples …

Elimination Of Empirical, Ineffective And Expensive Pg Plus Tests To Characterize Modified Binders, Zahid Hossain, Ashraf Elsayed, Mm Tariq Morshed, Mohammad Hassan

Data

Corresponding data set for Tran-SET Project No. 18BASU02. Abstract of the final report is stated below for reference:

"For characterizing the polymer modified binders, different state Departments of Transportation (DOTs) use different time consuming and empirical Performance Grade (PG) Plus test methods. Furthermore, the PG Plus tests are silent when asphalt binders are modified with chemicals such as polyphosphoric acid (PPA). But, the effects of the elastomeric or plastomeric polymer are not accurately identified through these conventional tests such as Elastic Recovery (ER) and tenacity. Thus, the main research goal of this study is to recommend alternative test method(s), which …

Development Of A Methodology For Characterizing Reaction Kinetics, Rheology, And In-Situ Compaction Of Polyimide Prepregs During Cure, James Raymond Magato, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

PMR-type polyimide prepregs are challenging to fabricate into high quality composites due to volatiles that are generated and must be removed in situ during processing. The current work was conducted to develop accurate, reliable, and practical characterization techniques of the prepreg rheology, volatile generation, and subsequent volatile removal from the prepreg during composite fabrication. Thermal analysis was used to characterize volatile generation, reaction rates, and rheology. A novel approach was used to measure the thickness of the prepreg in situ during vacuum bag/oven processing using a high-temperature LVDT. Experimental results are presented for the commercially available RM-1100 polyimide/carbon prepreg system, …

Triple-Junction Solar Cells : In Parallel., Levi C Mays

Electronic Theses and Dissertations

This paper looks into the current inefficiency of solar cells and attempts a few alternative solar cell structures in order to provide a more effective source of renewable energy. Currently, multi-junction solar cells are being developed to capture the sun’s light more efficiently. One of the ideas in this paper is to add a window to see if the addition of such a layer into a junction will increase the voltage while maintaining nearly the same current output. Central to this paper is the rearranging of the conducting layers of the multi-junction cell so that the junctions can be connected …

Microstructural Effects On Photocatalytic Performance In Ag3po4/Bi2moo6 Z-Scheme Photocatalyst Systems, Kaleab Mengesha Ayalew

UNLV Theses, Dissertations, Professional Papers, and Capstones

As the world population continues to grow and access to modern industry become increasingly common, humanity finds itself amid an environmental and energy crisis. Natural resources, such as clean water are getting scarce. Currently, the development of high efficiency, green energy sources, and eco-friendly methods for water treatment have become a nonelective task. As a result, photocatalysis, as one of the most promising technologies in utilizing solar energy and pollutant removal, has attracted considerable attention.

However, the practical application of photocatalysis is still elusive because of the difficulty of finding an individual material that can satisfy all the requirements for …

Elimination Of Empirical, Ineffective And Expensive Pg Plus Tests To Characterize Modified Binders, Zahid Hossain, Ashraf Elsayed, Mm Tariq Morshed, Mohammad Hassan

Publications

For characterizing the polymer modified binders, different state Departments of Transportation (DOTs) use different time consuming and empirical Performance Grade (PG) Plus test methods. Furthermore, the PG Plus tests are silent when asphalt binders are modified with chemicals such as polyphosphoric acid (PPA). But, the effects of the elastomeric or plastomeric polymer are not accurately identified through these conventional tests such as Elastic Recovery (ER) and tenacity. Thus, the main research goal of this study is to recommend alternative test method(s), which can possibly be pursued by using a commonly available device, a Dynamic Shear Rheometer (DSR). Three PG binders …

Use Of Rice Husk Ash (Rha) In Flowable Fill Concrete Mix Material, Zahid Hossain, Kazi Tamzidul Islam

Publications

In the way of finding sustainable development, the flowable fill is a relatively new construction technology. Flowable fill is a self-compacting material, which has been developed in recent years. Flowable fill has been used for different applications such as backfilling walls, sewer trenches, bridge abutments, conduit trenches, pile excavations, and retaining walls. This study examines the potential uses of Rice Husk Ash (RHA) as a sustainable cementitious material (SCM) in the preparation of flowable fill concrete. (RHA is an agricultural by-product of the rice milling process. This study has evaluated the usage of RHA in producing low strength and self-consolidating …

Self-Healing Concrete Using Encapsulated Bacterial Spores In A Simulated Hot Subtropical Climate, Marwa Hassan, Jose Milla, Tyson Rupnow, Ahsennur Soysal

Publications

Bacterial concrete has become one of the most promising self-healing alternatives due to its capability to seal crack widths through microbial induced calcite precipitation (MICP). In this study, two bacterial strains were embedded at varying dosages (by weight of cement) in concrete. Beam specimens were used to identify the maximum crack-sealing efficiency, while cylinder samples were used to determine their effects on the intrinsic mechanical properties, as well as its stiffness recovery over time after inducing damage. The concrete specimens were cured in wet-dry cycles to determine their feasibility in Region 6. The results showed that the specimen groups with …

Workforce Development Symposiums For Uhpc, Brad Weldon, Craig Newtson, Grace Mcmurry, Leticia Davila

Publications

Ultra-high performance concrete (UHPC) is a cementitious material with a dense microstructure that contributes to high compressive strengths as well as enhanced durability properties. UHPC also possesses significant post-cracking strength and ductility due to the addition of fibers. These characteristics produce a material that provides advantages over conventional concrete; however, high costs attributed to materials and production, lack of industry familiarity and knowledge, and the absence of standardized design procedures have impeded its widespread use. To help disseminate knowledge on UHPC, two workforce development symposiums on UHPC were held in Las Cruces, New Mexico. The symposiums consisted of presentations and …

Structure And Properties Of Zno-Zns Heterostructures, Sanchali Das

Graduate Theses/Dissertations

Heterostructures consisting of at least two layers of dissimilar materials have always been well studied due to potential applications in nano-electronic and optoelectronic devices. In this study, I have investigated the structural and physical properties of zinc oxide -zinc sulfide (ZnO-ZnS) based heterostructures of thin films and core-shell nanoparticles. Pulsed laser deposition technique was employed to grow ZnO thin film on sapphire substrate. ZnO-ZnS heterostructures were obtained using hydrothermal synthesis where thiourea has served as a precursor solution for the source of sulfur. X-ray diffraction analysis on the parent and the sulfidized samples gives the information about the crystallinity and …

Synthesis Of Amorphous Hydrogenated Boron Carbide From Orthocarborane Using Argon Bombardment: A Reaxff Molecular Dynamics Study, Nirmal Baishnab

Graduate Theses/Dissertations

In this study, the synthesis process of a-B­_xC:H_y using argon bombardment from the orthocarborane precursor was modeled by using reactive molecular dynamics (MD). Utilizing the MD simulations, the formation of free radicals as a result of ion bombardment was identified and quantified. Then, the densification process that is aided by the mixture of free radicals and orthocarborane was analyzed. The densification process by creating the initial structure composed of free radicals and orthocarborane with active sites created by partially removing some of the hydrogen atoms from the icosahedral cage was also modelled. Overall, a better understanding of …

Understanding Self-Assembly And Charge Transport In Organic Solar Cells Through Efficient Computation, Evan Miller

Boise State University Theses and Dissertations

Organic solar cells capable of sustainably generating electricity are possible if: (1) The structures assembled by photoactive molecules can be controlled, and (2) The structures favorable for charge transport can be determined. In this dissertation we conduct computational studies to understand relationships between organic solar cell compounds, processing, structure and charge transport. We advance tools for encapsulating computational workflows so that simulations are more reproducible and transferable. We find that molecular dynamic simulations using simplified models efficiently predict experimental structures. We find that the mobilities of charges through these structures—as determined by kinetic Monte Carlo simulations—match qualitative trends expected with …

Oxidation Behavior Of Zirconium Alloys In Transient Conditions, Jordan Lee Vandegrift

Boise State University Theses and Dissertations

The effect of sample geometry, welding strategies, atmosphere, plastic deformation, and rapid heating on the oxidation behavior of zirconium alloys has been investigated in this work. The goal of this work was to determine which zirconium alloy would be best suited as nuclear fuel cladding material in the Transient Reactor Test (TREAT) facility at the Idaho National Laboratory (INL), which has unique operating conditions compared to typical reactors. TREAT is air-cooled, operates at high temperatures (400-600 °C), and produces rapid transients (≤ 700 ^°C/_s). Additionally, TREAT’s cladding geometry is unique in that it has chamfers and welds. …

A Study Of Protein And Peptide-Directed Nanoparticle Synthesis For Catalytic Materials, Abdollah Mosleh

Graduate Theses and Dissertations

Nanoparticles have received much attentions due to their unique properties that makes them suitable candidates for a broad range of applications. As the size of particles decreases, their surface area-to-volume ratio would increase which is the main cause of much attention. In addition to the size, their morphologies and compositions may also play important roles for defining unique properties. Nanoparticle synthesis include both bottom-up and top-down strategies. To control the process of inorganic nanoparticles synthesis one could follow the bottom-up approach to have atom-level control over their compositions, morphologies, phases, and sizes which is the subject of this work. Due …

Growth Of Indium Nitride Quantum Dots By Molecular Beam Epitaxy, Steven P. Minor

Graduate Theses and Dissertations

Over the last decade, the evolution of the global consciousness in response to decreasing environmental conditions from global warming and pollution has led to an outcry for finding new alternative/clean methods for harvesting energy and determining ways to minimize energy consumption. III-nitride materials are of interest for optoelectronic and electronic device applications such as high efficiency solar cells, solid state lighting (LEDs), and blue laser (Blu-ray Technology) applications. The wide range of direct band gaps covered by its alloys (0.7eV-6.2eV) best illustrates the versatility of III-nitride materials. This wide range has enabled applications extending from the ultraviolet to the near …

Use Of Bagasse Ash As A Concrete Additive For Road Pavement Application, Gabriel Arce, Marwa Hassan, Maria Gutierrez, Michele Barbato

Publications

The objective of this study was to evaluate the use of sugarcane bagasse ash (SCBA) as a partial replacement of cement in concrete for road pavement application. The study explored the pozzolanic activity of SCBA produced from three different processing methodologies (i.e., raw SCBA, controlled SCBA and post-processed SCBA). The experimental results revealed that SCBA produced by the controlled burning of sugarcane bagasse fiber (SBF) at 650°C and grinding (C-650), presented the maximum pozzolanic activity. However, this SCBA production process was deemed challenging for large-scale industrial application due to low SCBA yield (i.e., 3 to 6%). On the other hand, …

Disaster Resilient And Self-Assessing Multifunctional Transportation Structures, Ibrahim Karaman, Darren Hartl

Publications

This research designs and characterizes multifunctional materials, in particular inexpensive shape memory alloys, for transportation structures that possess excellent mechanical properties and self-sensing capabilities for strengthening and health monitoring. The properties are the Fe-SMAs are sensitive to part size in that the grain size of the material, which can be grown to several inches, should exceed the smallest dimension of the part. In the current work, maximum part size of the large dimension Fe-SMA rods were determined through detailed microstructural investigations. Samples were subjected to abnormal grain growth heat treatments and found out that part size be increased up to …

Switching Trajectory Control For High Voltage Silicon Carbide Power Devices With Novel Active Gate Drivers, Shuang Zhao

Graduate Theses and Dissertations

The penetration of silicon carbide (SiC) semiconductor devices is increasing in the power industry due to their lower parasitics, higher blocking voltage, and higher thermal conductivity over their silicon (Si) counterparts. Applications of high voltage SiC power devices, generally 10 kV or higher, can significantly reduce the amount of the cascaded levels of converters in the distributed system, simplify the system by reducing the number of the semiconductor devices, and increase the system reliability.

However, the gate drivers for high voltage SiC devices are not available on the market. Also, the characteristics of the third generation 10 kV SiC MOSFETs …

Braze For Ceramic And Ceramic Matrix Composite Components, Sean E. Landwehr, Scott Nelson, Jeremy Lee Watts, Greg Hilmas, William Fahrenholtz, Derek Scott King

Materials Science and Engineering Faculty Research & Creative Works

In some examples, a technique may include positioning a first part comprising a ceramic or ceramic matrix composite and a second part comprising a ceramic or a CMC adjacent to each other to define a joint region at the interface of the first part and the second part. In some examples, the joint region may be heated using at least one of a laser or a plasma arc source to heat the joint region to an elevated temperature. The first and second parts may be pressed together and cooled to join the first and second parts at the joint region. …

Preparation Of Chitosan-Polyethylene Oxide-Colocasia Esculenta Flour Nanofibers Using Electrospinning Method, Riesca Ayu Kusuma Wardhani, Lia Asri, Muhamad Nasir, Bambang Sunendar Purwasasmita

Journal of Mechanical Engineering Science and Technology (JMEST)

Nanofibers have been prepared from the mixture of chitosan, polyethylene oxide (PEO) and Colocasia esculenta flour (CE flour) by using the electrospinning method. Two different nanofibers were formulated, containing chitosan-PEO and chitosan-PEO-CE flour. The higher concentration of PEO (3%chitosan-6%PEO) (w/v) resulted in more uniform chitosan-PEO electrospun nanofibers without beads. Chitosan-PEO-CE flour was prepared by addition of colloidal CE flour into the solution containing 3%chitosan-6%PEO with variation of the CE flour concentration of 5, 15 and 25% (w/v). Scanning Electron Microscopy demonstrated that the average diameter of chitosan-PEO nanofibers was 128±41 nm, whereas the diameter of chitosan-PEO-CE flour nanofibers was 159±45 …

Study On The Thermal Distortion, Hardness, And Microstructure Of St 37 Steel Plate Joined Using Fcaw, Maijuansyah Maijuansyah, Yanuar Rohmat Aji Pradana, Gaguk Jatisukamto, Solichin Solichin

Journal of Mechanical Engineering Science and Technology (JMEST)

This study sets out to investigate the distortion angle, microstructure, and hardness of St 37 steel plate weld joint produced by FCAW using the welding current of 80, 110, and 140 A. By using flat position, CO2 and E71T-1 wire were utilized as a shielding gas and electrode filler, respectively. The distortion angle measurement was done on 3 different locations of the welded sample perpendicular to weld direction by using bevel protractor. The micro Vickers tests were then applied gradually at the crosssectional surface with a distance of 0, 5, 10 and 15 mm from weld centerline using the load …

Comparison Study Of Mechanical Properties Of Al-Si Alloy With And Without Nanoreinforce Iron Oxide (Fe2o3), Cepi Yazirin, Poppy Puspitasari, Muhamad Fatikul Arif

Journal of Mechanical Engineering Science and Technology (JMEST)

Nanoreinforce materials such as ZnO, eggshell, Al2O3, TiO2, and ZrO2 have been shown to improve the mechanical properties of Al-Si alloy. Nanomaterial Fe2O3 has many applications as catalysts reaction in electronic devices, for example, semiconductor materials, paint formulations, lithium rechargeable batteries, and is often applied in industrial fields. It is known that Fe2O3 can be synthesized through the stirring process on machine and method used will involve several steps that relatively take a long time. In this study, Al-Si alloy reinforced by using nanomaterial Fe2O3 which sintered at a temperature of 600C for 3 hours aimed to improve mechanical and …

The Effect Of Chemical Pretreatment Process On Mechanical Properties And Porosity Of Bacterial Cellulose Film, Tito Arif Sutrisno, Heru Suryanto, Retno Wulandari, M. Muhajir, Shikh Mohd Shahrul Nizan Shikh Zahari

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) is a natural polymer which have superior properties, like high porosity, high purity, and high permeability. The study objective is to determine the influence of chemical pretreatment on tensile strength and the porosity of BC. The method was to make BC films from pineapple peel extract through fermentation process for 14 days. The pretreatment was conducted by immersion of BC in BmimCl, H2O2, and NaOH solution with a concentration of 2.5%; 5%; and 7.5 %, heated at 80 °C then dried in the oven, and the samples were then tested by a tensile test using ASTM-D636-V standard, …

The Characteristic Of Overhang Object To Material Usage On Fdm 3d Printing Technology, Redyarsa Dharma Bintara, Aminnudin Aminnudin, Zumrotul Ida, Ferian Rizki Arbianto, Dani Prasetiyo

Journal of Mechanical Engineering Science and Technology (JMEST)

Fuse Deposition Modeling (FDM) 3D printing is one of additive manufacturing technology which physical 3D model is build up layer by layer. The support structure is almost involved on the process if overhang shape is met on the 3D model. It has main function to prevent the 3D printed model from collapsing. Commonly, the single material source of FDM 3D printer machine is to supply building two structure, structure of main 3D object and support structure. Hence, our goal optimizes the using of support material for reducing the main material usage. Furthermore, the sixteen of variation overhang angle is set …

Elastic Linear Analysis Of Connecting Rods For Single Cylinder Four Stroke Petrol Engines Using Finite Element Method, Didin Zakariya Lubis, Andoko Andoko

Journal of Mechanical Engineering Science and Technology (JMEST)

A connecting rod is one of the most critical parts in engine assembly which transfers energy from the piston to the crankshaft. The connecting rod mainly undergoes tensile and compressive loading under engine cyclic process. The forces acting on the connecting rod are forces due to maximum combustion pressure and forces due to the inertia of the connecting rod. This research aimed to analyze the design of the connecting rod of single-cylinder four-stroke engines. This study used CAD software for modeling and structural design. Stresses generated across all the locations of the connecting rod were evaluated using FEA Software. Elastic …

The Influence Of Different Packaging Materials And Atmospheric Conditions On The Properties Of Pork Rinds, Kristi Kõrge, Katrin Laos

Journal of Applied Packaging Research

Rancidity development in high fat content products is a common off-flavor flaw in snack foods. Packaging is often used to avoid spoilage and extend shelf-life. The properties of pork rinds packaged in four different packaging materials with and without nitrogen were studied during 120 days of storage (22 °C, RH 60%, absence of light). The influence of different packaging materials and atmospheric conditions on pork rinds’ water activity, hardness, crispness and rancidity development was determined. The PET/PE packaging material had lower barrier properties for the product in both atmospheric conditions compared with PP/metPP (40 and 50 μm) and PET/PETmet/PE. PP/metPP …