Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 541 - 570 of 690

Full-Text Articles in Materials Science and Engineering

Can A Comprehensive Transition Plan To Barefoot Running Be The Solution To The Injury Epidemic In American Endurance Runners?, Michael A. Scarlett Jan 2018

Can A Comprehensive Transition Plan To Barefoot Running Be The Solution To The Injury Epidemic In American Endurance Runners?, Michael A. Scarlett

CMC Senior Theses

Fossils belonging to the genus Homo, dating as far back as two million years ago, exhibit uniquely efficient features suggesting that early humans had evolved to become exceptional endurance runners. Although they did not have the cushion or stability-control features provided in our modern day running shoes, our early human ancestors experienced far less of the running-related injuries we experience today. The injury rate has been estimated as high as 90% annually for Americans training for a marathon and as high as 79% annually for all American endurance runners. There is an injury epidemic in conventionally shod populations that …

Go to article

The Formation And Characterization Of Mesoscopic J- And H-Aggregates With Controlled Morphologies By The Co- And Templated Assembly Of Cyanine Dyes, Samuel Rhodes Jan 2018

The Formation And Characterization Of Mesoscopic J- And H-Aggregates With Controlled Morphologies By The Co- And Templated Assembly Of Cyanine Dyes, Samuel Rhodes

Electronic Theses and Dissertations

The supramolecular aggregates of π-conjugated molecules have become an area of great interest to the scientific community in recent years for their promise in biosensors and optoelectronic devices. Among various supramolecular aggregates, J- and H-aggregates of πconjugated dye molecules are particularly interesting because of their unique optical and excitonic properties that are not given by individual molecules. H-aggregates are composed of dye molecules in a face-to-face stacking, giving rise to a blue-shifted absorption band compared with the monomer band and a strong emission quenching. In contrast, J-aggregates represent an edge-toedge stacking of dye molecules, showing a red-shifted absorption band with …

Go to article

Processing Of Cubic Stabilized Zirconia Electrolyte Membranes For Electrolyte-Supported Single Cell Solid Oxide Fuel Cells Using Tape Casting, Arturo Coronado Rodriguez Jan 2018

Processing Of Cubic Stabilized Zirconia Electrolyte Membranes For Electrolyte-Supported Single Cell Solid Oxide Fuel Cells Using Tape Casting, Arturo Coronado Rodriguez

Honors Undergraduate Theses

Electrochemical conversion devices are a developing technology that prove to be a viable and more efficient alternative to current environmentally friendly generation devices. As such, constant research has been done in the last few decades to increase their applications and reliability. One of these systems, and the focus of this research, is the single cell Solid Oxide Fuel Cell (SOFC). These systems are a developing technology which main caveat is the need of high operating temperatures and costs. As such, most multidisciplinary research has been focused on researching materials and/or processes that help mitigate the costs or lower the operating …

Go to article

Equibiaxial Flexural Strength Testing Of Advance Ceramics, Ryan T. Jordan Jan 2018

Equibiaxial Flexural Strength Testing Of Advance Ceramics, Ryan T. Jordan

Honors Undergraduate Theses

Ceramics are very important materials with many unique properties used in numerous industrial applications. Ceramics could be very hard and very strong in comparison to metals; however, they are very brittle, thus they are prone to instantaneous and catastrophic failure. Therefore, their reliability is compromised and it is very important to have advanced techniques that allow evaluating their mechanical behavior in many unusual stress states. One of such testing methods is biaxial strength method, that allows to measure properties not only unidirectional, but also in a biaxial way. The research work for this thesis will be built on design and …

Go to article

Experimental Study On Surface Integrity Of Cryogenically Machined Ti-6al-4v Alloy For Biomedical Devices, M. Hardt, F. Klocke, B. Döbbeler, M. Binder, Ibrahim S. Jawahir Jan 2018

Experimental Study On Surface Integrity Of Cryogenically Machined Ti-6al-4v Alloy For Biomedical Devices, M. Hardt, F. Klocke, B. Döbbeler, M. Binder, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Titanium and its alloys are widely used in the biomedical sector. In this field, titanium and its alloys are the material of choice for biomedical devices such as hip and knee replacements. Usually, a Total Hip Replacement (THR) is based on four components, made out of different materials due to the material properties associated with the functional performance. One approach to lower the overall manufacturing costs and enhance the reliability of THR’s is to manufacture the prosthesis out of one material. The titanium alloy Ti-6Al-4V is, therefore, feasible as it exhibits better osseous integration compared to other metallic materials used …

Go to article

Topology Optimization Of Lightweight Structural Composites Inspired By Cuttlefish Bone, Varun Kumar Gadipudi Jan 2018

Topology Optimization Of Lightweight Structural Composites Inspired By Cuttlefish Bone, Varun Kumar Gadipudi

Electronic Theses and Dissertations

Lightweight material structure is a crucial subject in product design. The lightweight material has high strength to weight proportion which turns into an immense fascination and a territory of investigation for the researchers as its application is wide and expanding consistently. Lightweight composite material design is accomplished by choice of the cellular structure and its optimization. Cellular structure is utilized as it has wide multifunctional properties with lightweight characteristics. Unless it has been topologically optimized, each part in a assembly most likely weighs more than it needs to. Additional weight implies abundance materials are being utilized, loads on moving parts …

Go to article

Bio-Mimetic Design With 3d Printable Composites, Ramya Mitra Patnam Damodaram Jan 2018

Bio-Mimetic Design With 3d Printable Composites, Ramya Mitra Patnam Damodaram

Electronic Theses and Dissertations

Weight and stiffness are key factors in the advancement of materials and parts for use in numerous industries. Lightweight cellular structures are broadly utilized for this reason. However, these structures must satisfy several key constraints: they should be light yet structurally safe, sustainable in different loading conditions, resource efficient and easy to maintain. Bio-inspired materials/structures which results in desirable material features are a significant inspiration for engineered cellular structures. Cellular structures can be designed to have multifunctional properties along with lightweight characteristics. Currently, these structures with high strength to weight ratio are widely applied in many fields such as automotive, …

Go to article

Novel Technique Of Fabrication Of Porous Copper And Copper Oxide To Improve The Lithium Ion Battery Performance, Raju Prasad Ghimire Jan 2018

Novel Technique Of Fabrication Of Porous Copper And Copper Oxide To Improve The Lithium Ion Battery Performance, Raju Prasad Ghimire

Electronic Theses and Dissertations

Due to widespread and long-term application, Lithium-ion batteries are considered as promising power sources for portable devices, satellites, medical instruments, computers, electric vehicles and grid application. It started to occupy the market once Sony commercialized in 1991. Rechargeable lithium ion batteries drawing people attention due to their peculiar properties such as high energy density and low self-discharge compared to other alkali metals. However, these widespread and long-term applications still require better batteries in terms of performance, safety and cost, which can be achieved by better utilization of anode materials and/or an optimized design of battery configuration. There are several challenges …

Go to article

Development Of Material For 3d Printed Habitats With Extraplanetary Applications, Taylor Wait Jan 2018

Development Of Material For 3d Printed Habitats With Extraplanetary Applications, Taylor Wait

Electronic Theses and Dissertations

3D printing, also called Additive Manufacturing, has increasingly become a focus for research because of the potential to replace complicated assemblies or complex parts with a single printed item. The space industry is very interesting in studying 3d printing with parts being tested and used on rockets, a 3D printer being installed at the International Space Station and is being developed for use in manned exploration of extraplanetary bodies to build habitats. To encourage teams from around the world to develop technologies and materials for autonomous habitat construction using minimal Earth exports, NASA created the 3D Printed Habitat Challenge. NASA …

Go to article

Pathways For Mitigating Thermal Losses In Solar Photovoltaics, Rodolphe Vaillon, Oliver Dupre, Raúl Bayoán Cal, Marc Calaf Jan 2018

Pathways For Mitigating Thermal Losses In Solar Photovoltaics, Rodolphe Vaillon, Oliver Dupre, Raúl Bayoán Cal, Marc Calaf

Mechanical and Materials Engineering Faculty Publications and Presentations

To improve the performance of solar photovoltaic devices one should mitigate three types of losses: optical, electrical and thermal. However, further reducing the optical and electrical losses in modern photovoltaic devices is becoming increasingly costly. Therefore, there is a rising interest in minimizing the thermal losses. These correspond to the reduction in electrical power output resultant of working at temperatures above 25 °C and the associated accelerated aging. Here, we quantify the impact of all possible strategies to mitigate thermal losses in the case of the mainstream crystalline silicon technology. Results indicate that ensuring a minimum level of conductive/convective cooling …

Go to article

Material Thermal Property Estimation Of Fibrous Insulation: Heat Transfer Modeling And The Continuous Genetic Algorithm, Elora Frye Jan 2018

Material Thermal Property Estimation Of Fibrous Insulation: Heat Transfer Modeling And The Continuous Genetic Algorithm, Elora Frye

Theses and Dissertations

Material thermal properties are highly sought after to better understand the performance of a material under particular conditions. As new materials are created, their physical properties will determine their performance for various applications. These properties have been estimated using many techniques including experimental testing, numerical modeling, and a combination of both. Existing methods can be time consuming, thus, a time-efficient and precise method to estimate these thermal properties was desired. A one-dimensional finite difference numerical model was developed to replicate the heat transfer through an experimental apparatus. A combination of this numerical model and the Continuous Genetic Algorithm optimization technique …

Go to article

Evaluation Of The Effect Of Tack Coat Type, Application Rate, And Surface Type On Interlayer Shear Strength, Chamika Prashan Dharmarathna Jan 2018

Evaluation Of The Effect Of Tack Coat Type, Application Rate, And Surface Type On Interlayer Shear Strength, Chamika Prashan Dharmarathna

Electronic Theses and Dissertations

Tack coat is an asphaltic material applied between asphalt pavement layers. Since pavement is a multilayered structure, it is highly important to make proper bond between the layers to achieve a monolithic behavior. Hence, inadequate bond due to application of inadequate amount of tack coat may lead to poor structural behavior and premature failure. Also, applying excessive amount of tack coat may lead to layer slippage and binder migration. Therefore, it is highly important to apply an optimum amount of tack coat between layers. Over the past decades several studies have been conducted to determine the optimum tack coat application …

Go to article

Thickness Dependence Of Electrical Conductivity In A Thin Film Thermoelectric Composite, David Zagaceta, William Rogers, Andres Breucop, Brian Herrera Jan 2018

Thickness Dependence Of Electrical Conductivity In A Thin Film Thermoelectric Composite, David Zagaceta, William Rogers, Andres Breucop, Brian Herrera

Math 365 Class Projects

In this work we utilize the Van Der Pauw method for measuring and calculating the electrical conductivity of a composite material in relation to its thickness.

Go to article

Development Of Sorption Technology For Extracting Rare Earth Elements From Coal Fly Ash, Bilal Syed Jan 2018

Development Of Sorption Technology For Extracting Rare Earth Elements From Coal Fly Ash, Bilal Syed

Research Opportunities for Engineering Undergraduates (ROEU) Program 2017-18

Rare Earth Elements (REEs) are elements with many high tech uses (e.g., smartphones, electric cars, advanced weaponry) and have been identified by the DOE to be critical to the US economy. Currently, China supplies over 85% of REEs resulting in an undiversified market and susceptibility to supply shock and economic insecurity. To address this susceptibility, this research aims to develop an economic and environmentally-friendly method of extracting REEs from nascent, plentiful sources such as coal and coal by-products like fly ash.

Go to article

Effects Of Build Parameters On The Mechanical And Di-Electrical Properties Of Am Parts, Sai Sri Munaganuru, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rauhon Ahmed Shaik, Hari K. Adluru, Rassel Raihan Jan 2018

Effects Of Build Parameters On The Mechanical And Di-Electrical Properties Of Am Parts, Sai Sri Munaganuru, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rauhon Ahmed Shaik, Hari K. Adluru, Rassel Raihan

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Additive manufacturing (AM) revolutionized many industries, i.e., Automotive, Biomedical, Aerospace and Defense. As opposed to traditional manufacturing methods, a part is manufactured layer by layer from 3D CAD models in AM. Though the vision of AM is impressive, there are many challenges that are hindering the widespread use of these complex parts. One of the challenges in these materials is defects grow and their orientation during the manufacturing process. In this paper we are going to investigate the effect of Build Parameters and their effects on the mechanical and electrical properties of the additively manufactured heterogeneous material system. We will …

Go to article

Manufacturing A Composite Wheel Prototype Using 3d Printed Molds, Steven Thuening Jan 2018

Manufacturing A Composite Wheel Prototype Using 3d Printed Molds, Steven Thuening

All Graduate Theses, Dissertations, and Other Capstone Projects

Throughout the evolution of high performance racing, a large emphasis has been on reducing the weight of the vehicle in order to improve its performance. Over the years, new designs and materials have been introduced reducing weight in a variety of different locations. Comparing weight reduced in different areas has shown that some areas are more valuable to reduce than others are. Perhaps one of the most beneficial locations are the wheels. This is because the mass of the wheel is considered unsprung and rotational. Because of this, large improvements towards the reduction of wheel mass have been developed in …

Go to article

Technology Development For Detection Of Circulating Disease Biomarkers From Liquid Biopsies Using Multifunctional Nanomaterials, Mustafa Balcioglu Jan 2018

Technology Development For Detection Of Circulating Disease Biomarkers From Liquid Biopsies Using Multifunctional Nanomaterials, Mustafa Balcioglu

Legacy Theses & Dissertations (2009 - 2024)

Despite the advance health care, devastating health conditions such as cancer and infectious diseases that affect populations worldwide are too often not diagnosed until morbid symptoms become apparent in the late phase. Obtaining an early and accurate diagnosis that reveal a hidden lethal threat before the disease becomes complicated may dramatically reduce the severity of its impact on the patient’s life and increase the probability of survival. For example, in the case of ovarian cancer, which is the fifth most common malignancy and the fifth leading cause of cancer mortality in women in the US, the 5-year relative survival is …

Go to article

Dna Functionalized Nanoparticles In Nanobiosensor And Sensor Array Development For Molecular Diagnostics And In Vitro Identification Of Biomolecules, Mustafa Salih Hizir Jan 2018

Dna Functionalized Nanoparticles In Nanobiosensor And Sensor Array Development For Molecular Diagnostics And In Vitro Identification Of Biomolecules, Mustafa Salih Hizir

Legacy Theses & Dissertations (2009 - 2024)

Nucleic acid technology along with vast variety of nanomaterials has demonstrated a great potential in many applications from biosensing studies to molecular diagnostics, from biomedical and bioanalytical research to environmental analysis. Especially short single stranded (ss) DNA molecules, called oligonucleotides, are extraordinary biopolymers featuring diverse functionality on the nanoparticles thanks to their high degree of programmability, target-specific binding or cleavage, molecular recognition ability, structure-switching capability, and unique interactions at the bio-nano interfaces. Among those, there have been many biosensing applications utilizing ss DNAs and numerous nanomaterials through various detection techniques such as fluorometric, colorimetric or electrochemical methods. Although many groundbreaking …

Go to article

Genetically Engineered Polypeptides As Biomimetic Light Harvesting Optical Antenna, Jason P. Seeley Jan 2018

Genetically Engineered Polypeptides As Biomimetic Light Harvesting Optical Antenna, Jason P. Seeley

Legacy Theses & Dissertations (2009 - 2024)

Natural resources useful for the generation of energy are limited. The development of efficient materials capable of utilizing the abundant free solar radiation is of considerable interest. Utilization of otherwise wasted energy sources, including solar radiation, is a progressive step in the quest for sustainable energy. Solar radiation incident upon the earth’s surface exceeds current energy requirements and motivates scientists to investigate and develop functional devices and nanomaterials including light harvesting complexes (LHC) capable of capturing solar radiation for energy conversion and storage.

Go to article

Direct Strength Approach To Predict The Flexural Strength Of Cold-Formed Z-Section Purlins On Sloped Roofs, Ali Parva, Michael W. Seek Jan 2018

Direct Strength Approach To Predict The Flexural Strength Of Cold-Formed Z-Section Purlins On Sloped Roofs, Ali Parva, Michael W. Seek

Engineering Technology Faculty Publications

In this study, the strength of cold-formed Z-section purlins is predicted considering the effects of roof slope in real roof systems. The study applies to simple span purlins with torsion restraints at support locations and at paired locations along the length of the member. A previously developed method has shown through comparisons to base tests that when the biaxial bending and torsion stresses are incorporated into the analysis, the Direct Strength Method can accurately predict the strength of a purlin. These stress distributions can deviate substantially from the constrained bending approximation typically assumed in analysis and therefore impacts the local …

Go to article

Effect Of High- And Low-Molecular-Weight Hyaluronic-Acid-Functionalized-Az31 Mg And Ti Alloys On Proliferation And Differentiation Of Osteoblast Cells, Sankalp Agarwal, Brendan Duffy, James Curtin, Swarna Jaiswal Jan 2018

Effect Of High- And Low-Molecular-Weight Hyaluronic-Acid-Functionalized-Az31 Mg And Ti Alloys On Proliferation And Differentiation Of Osteoblast Cells, Sankalp Agarwal, Brendan Duffy, James Curtin, Swarna Jaiswal

Articles

The quality of patient care has increased dramatically in recent years because of the development of lightweight orthopedic metal implants. The success of these orthopedic implants may be compromised by impaired cytocompatibility and osteointegration. Biomimetic surface engineering of metal implants using biomacromolecules including hyaluronic acid (HA) has been used an effective approach to provide conditions favorable for the growth of bone forming cells. To date, there have been limited studies on osteoblasts functions in response to metal substrates modified with the hyaluronic acid of different molecular weight for orthopedic applications. In this study, we evaluated the osteoblasts functions such as …

Go to article

Electro-Magnetic Responsive Ni0.5zn0.5fe2o4 Nano-Particle Composite, Jaiprakash Kanagaraj Jan 2018

Electro-Magnetic Responsive Ni0.5zn0.5fe2o4 Nano-Particle Composite, Jaiprakash Kanagaraj

Electronic Theses and Dissertations

The purpose of this study is to simulate and synthesize a Radar (or Radiation) Absorbent Material (RAM) by using polymers and nickel zinc ferrite (Ni0.5Zn0.5Fe2O4) magnetic nanoparticles. There is an ardent desire in military, space and electronics for lighter, faster, cheaper and widespread bandwidth providing RAM materials. Electromagnetic property such as magnetic permeability and electric permittivity play a major in controlling the radiation. The appropriate combination of permeability and permittivity properties is acquired for the synthesis of RAM providing wide-ranging bandwidth. The apt property is achieved by rule of mixture, mixing of particular composition of epoxy polymer having low permeability …

Go to article

Analysis Of 3d Printed Cylindrical Members, Salvador Caballero Jan 2018

Analysis Of 3d Printed Cylindrical Members, Salvador Caballero

Electronic Theses and Dissertations

Compressive analysis of a structural member is the determination of the axial capacity of the member when it is undergoing a load causing the member to fail in either a buckling or a crushing mode. 3D printed plastic columns have not been characterized and analyzed yet. However, this research characterizes 3D-printed PLA columns and provides parameters for future researchers to investigate. The literature describes the different industries that utilize 3D-printing. In this research, we introduce an innovative approach to investigate the stresses produced in a 3D printed composite member, made of PLA and locally available soil. The compressive testing will …

Go to article

Photoluminescence From Gan Co-Doped With C And Si, Mykhailo Vorobiov Jan 2018

Photoluminescence From Gan Co-Doped With C And Si, Mykhailo Vorobiov

Theses and Dissertations

This thesis devoted to the experimental studies of yellow and blue luminescence (YL and BL relatively) bands in Gallium Nitride samples doped with C and Si. The band BLC was at first observed in the steady-state photoluminescence spectrum under high excitation intensities and discerned from BL1 and BL2 bands appearing in the same region of the spectrum. Using the time-resolved photoluminescence spectrum, we were able to determine the shape of the BLC and its position at 2.87 eV. Internal quantum efficiency of the YL band was estimated to be 90\%. The hole capture coefficient of the BLC …

Go to article

Magneto-Optic Properties Of Ultrathin Nanocrystalline Ferrite Garnet Films In The 8k To 300k Temperature Interval, Viatcheslav Kotov, Vladimir Shavrov, A. Popkov, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam, L. Alyabyeva, Dmitry Balabanov, Vladimir Burkov, M Virchenko Jan 2018

Magneto-Optic Properties Of Ultrathin Nanocrystalline Ferrite Garnet Films In The 8k To 300k Temperature Interval, Viatcheslav Kotov, Vladimir Shavrov, A. Popkov, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam, L. Alyabyeva, Dmitry Balabanov, Vladimir Burkov, M Virchenko

Research outputs 2014 to 2021

A study of the initial stages of crystallization in RF magnetron-sputtered ferrite garnet films is reported, in which a series of ultrathin Bi2Dy1Fe4Ga1O12 layers is fabricated and characterized. The spectral and temperature dependencies of magnetic circular dichroism (MCD) of these films are studied in the temperature range from 300 K down to 8 K. Measured magneto-optical properties are reported in the spectral range between 300 and 600 nm. In ultrathin garnets at temperatures below 160 K, we found that between 360 and 520 nm, the spectral MCD dependencies were typical of bismuth-substituted garnets with high levels of gallium dilution in …

Go to article

Mechanical Annealing Of Model Glasses: Effects Of Strain Amplitude And Temperature, Nikolai V. Priezjev Jan 2018

Mechanical Annealing Of Model Glasses: Effects Of Strain Amplitude And Temperature, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

Molecular dynamics simulations are performed to examine the dynamic response of amorphous solids to oscillatory shear at finite temperatures. The data were collected from a poorly annealed binary glass, which was deformed periodically in the elastic regime during several hundred shear cycles. We found that the characteristic time required to reach a steady state with a minimum potential energy is longer at higher temperatures and larger strain amplitudes. With decreasing strain amplitude, the asymptotic value of the potential energy increases but it remains lower than in quiescent samples. The transient decay of the potential energy correlates well with a gradual …

Go to article

Data Driven Composites: The Challenge And Paths Forwards, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider Jan 2018

Data Driven Composites: The Challenge And Paths Forwards, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

The concept of “data driven” grew out of the general subject of data analytics, especially in the business world. The classical sequence proposed by Dykes (2010) shown below illustrates the general contents of the concept. Indeed, the idea of “predictive modeling” of the future behavior of a system has strong roots in the business community. In general, for engineering and other fields, the data driven challenge is to use the past with information from the present to predict the future behavior of a system. In turn, the user must pay for collection and processing, hosting and maintenance of the data, …

Go to article

State Variable Methods Of Assessment, Prognosis, And Control Of Composite And Bonded Structures, Kenneth Reifsnider, Rassel Raihan, Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian Jan 2018

State Variable Methods Of Assessment, Prognosis, And Control Of Composite And Bonded Structures, Kenneth Reifsnider, Rassel Raihan, Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

It is generally recognized that the determination of material state is the baseline foundation for the assessment and prognosis of current and future performance of structural materials in which distributed damage leads to progressive property degradation. Many classes of composite materials, both naturally occurring and engineering designs, are governed by such behavior. However, finding appropriate measureable physical variables to make such assessments, especially for as-manufactured and subsequent real-time assessment and prognosis conditions is challenging. Measurement and analysis of multiple single defect initiation, interaction, and collective effects is the most rigorous current methodology, and is the foundation for certification and quality …

Go to article

Global Prediction Of Discrete Local Damage Interactions Using Broadband Dielectric Spectroscopy, Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian, Rauhon Ahmed Shaik, Aishwarya Nandini, Rassel Raihan, Kenneth Reifsnider Jan 2018

Global Prediction Of Discrete Local Damage Interactions Using Broadband Dielectric Spectroscopy, Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian, Rauhon Ahmed Shaik, Aishwarya Nandini, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

With the increasing demand for composites in many modern applications, it is important to predict the initiation of failure events. Due to the heterogeneous nature of these materials, a single damage mode will not lead to final failure, hence detecting the initiation and growth of a single crack (defect) will not yield accurate predictions of the strength or the material state. It is important to capture the interaction of various damage modes that tend to change the material state leading to initiation of failure. To assess the material state, one needs to determine the appropriate global physical variables that can …

Go to article

Molecular Dynamics For The Prediction Of The Interfacial Shear Stress And Interface Dielectric Properties Of Carbon Fiber Epoxy Composites, Rajni Chahal, Ashfaq Adnan, Kenneth Reifsnider, Rassel Raihan, Yuan Ting Wu, Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian Jan 2018

Molecular Dynamics For The Prediction Of The Interfacial Shear Stress And Interface Dielectric Properties Of Carbon Fiber Epoxy Composites, Rajni Chahal, Ashfaq Adnan, Kenneth Reifsnider, Rassel Raihan, Yuan Ting Wu, Vamsee Vadlamudi, Muthu Ram Prabhu Elenchezhian

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

The thermoset epoxy resin Diglycidyl ether of Bisphenol F (EPON 862), crosslinked with the Diethylene Toluene Diamine (DETDA) hardening agent, are utilized as the polymer matrix component in many graphite (carbon fiber) composites. Since it is difficult to experimentally characterize the interfacial region, computational molecular modeling is a necessary tool for understanding the influence of the interfacial molecular structure on bulk-level material properties. The purpose of this research is to evaluate and compare the interfacial shear stress and dipole moment for the pristine carbon fiber composite and the one with the moisture content at the interface. Molecular models are established …

Go to article

First Prev Next Last