Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 481 - 510 of 689

Full-Text Articles in Materials Science and Engineering

A System Dynamics Innovation Diffusion Model Applied To Carbon Nanotube Manufacturing, Frances G. Mackinnon Mar 2018

A System Dynamics Innovation Diffusion Model Applied To Carbon Nanotube Manufacturing, Frances G. Mackinnon

Theses and Dissertations

The transition of advanced technologies from their nascent state to viable commercial entities is a critical step in assuring the United States' national technological superiority and support is often required to incubate such technological developments. We propose a spiral development to investigate the possible scenarios, underlying economics, and risk associated with scaling up carbon nanotube (CNT) production to a commercially viable scale. As the first stage of this proposed effort, this study characterizes the potential scenarios by which a CNT manufacturing company can generate positive annual net revenue and potentially be considered a competitive manufacturer of CNT products on an …

Go to article

Measuring The Creep Behaviour Of Corrugated Board By Cascade And Individual Test Rig, Viktoria Köstner, Jörg B. Ressel, Bernd Sadlowsky, Péter Böröcz Mar 2018

Measuring The Creep Behaviour Of Corrugated Board By Cascade And Individual Test Rig, Viktoria Köstner, Jörg B. Ressel, Bernd Sadlowsky, Péter Böröcz

Journal of Applied Packaging Research

In this paper static and quasi-static test are conducted to determine the creep behaviour of corrugated board. This study shows a possible way to take the real loads occurring in container shipping into account. The aim of the measurements is to develop a new test option, which is in keeping with the loads occurring. Two test rigs have been developed and constructed for this purpose. These make it possible to measure the creep of corrugated board extremely precisely over a longer period in the aspect of climate chamber size and relative humidity (RH) distribution in the chamber. To increase the …

Go to article

Selective Laser Melting Of Ni-Rich Niti: Selection Of Process Parameters And The Superelastic Response, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Ehsan Saghaian, Ahmadreza Jahadakbar, Haluk E. Karaca, Mohammad Elahinia Mar 2018

Selective Laser Melting Of Ni-Rich Niti: Selection Of Process Parameters And The Superelastic Response, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Ehsan Saghaian, Ahmadreza Jahadakbar, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Material and mechanical properties of NiTi shape memory alloys strongly depend on the fabrication process parameters and the resulting microstructure. In selective laser melting, the combination of parameters such as laser power, scanning speed, and hatch spacing determine the microstructural defects, grain size and texture. Therefore, processing parameters can be adjusted to tailor the microstructure and mechanical response of the alloy. In this work, NiTi samples were fabricated using Ni50.8Ti (at.%) powder via SLM PXM by Phenix/3D Systems and the effects of processing parameters were systematically studied. The relationship between the processing parameters and superelastic properties were investigated …

Go to article

Influence Of Slm On Compressive Response Of Niti Scaffolds, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Ahmadreza Jahadakbar, Sayed Ehsan Saghaian, Haluk E. Karaca, Mohammad Elahinia Mar 2018

Influence Of Slm On Compressive Response Of Niti Scaffolds, Narges Shayesteh Moghaddam, Soheil Saedi, Amirhesam Amerinatanzi, Ahmadreza Jahadakbar, Sayed Ehsan Saghaian, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Porous Nickel-Titanium shape memory alloys (NiTi-SMAs) have attracted much attention in biomedical applications due to their high range of pure elastic deformability (i.e., superelasticity) as well as their bone-level modulus of elasticity (E≈12-20 GPa). In recent years, Selective Laser Melting (SLM) has been used to produce complex NiTi components. The focus of this study is to investigate the superelasticity and compressive properties of SLM NiTi-SMAs. To this aim, several NiTi components with different level of porosities (32- 58%) were fabricated from Ni50.8Ti (at. %) powder via SLM PXM by Phenix/3D Systems, using optimum processing parameter (Laser power-P=250 W, …

Go to article

Creep Of Hi-Nicalon™ S Ceramic Fiber Tows At 1000°C In Air And In Silicic Acid-Saturated Steam, Brian G. Kroeger Mar 2018

Creep Of Hi-Nicalon™ S Ceramic Fiber Tows At 1000°C In Air And In Silicic Acid-Saturated Steam, Brian G. Kroeger

Theses and Dissertations

Advanced SiC/SiC ceramic matrix composites (CMCs) are being considered for a variety of applications. Of interest is their ability to withstand exposure to high temperature in an aggressive oxidizing environment. The presence of steam creates such an environment. As steam traverses across a SiC/SiC composite and through cracks in the SiC matrix, it becomes saturated with silicic acid, Si(OH)4. It is essential to understand the long-term impacts and durability of SiC/SiC CMCs that have been exposed to such a demanding environment. The present research investigated creep of Hi-Nicalon™ S SiC fibers at 1000°C in air and in silicic …

Go to article

Non-Precious Metal Catalysts For Oxygen Reduction Reaction In Alkaline Solutions, Zhewen Yin Mar 2018

Non-Precious Metal Catalysts For Oxygen Reduction Reaction In Alkaline Solutions, Zhewen Yin

USF Tampa Graduate Theses and Dissertations

Mesoporous WO3 powders were prepared via sol-gel processing synthesis using nonionic surfactant Pluronic (P-123) as the template. The influences of heating temperature on the pore structure and properties of WO3 powders were investigated. Three kinds of modifications were compared and evaluated after finding out the best heating condition. Different amount of lanthanum was doped into mesoporous WO3 to improve its Oxygen Reduction Reaction (ORR) activity. Several factors contributing to the increase of catalytic performance were discussed. Vulcan carbon powder was also used as a support to increase the catalysts’ electrical conductivity as well as dispersity. The component, microstructure and specific …

Go to article

The Subject Librarian Newsletter, Engineering And Computer Science, Spring 2018, Buenaventura "Ven" Basco Mar 2018

The Subject Librarian Newsletter, Engineering And Computer Science, Spring 2018, Buenaventura "Ven" Basco

Libraries' Newsletters

No abstract provided.

Go to article

Communication And Biodegradable Packaging Relationship: A Paradigm For Final Disposal, Breno Luiz Ottoni, Rafael Mattos Deus, José Alcides Gobbo Junior, Ângela Maria Grossi De Carvalho, Rosane Aparecida Gomes Battistelle Mar 2018

Communication And Biodegradable Packaging Relationship: A Paradigm For Final Disposal, Breno Luiz Ottoni, Rafael Mattos Deus, José Alcides Gobbo Junior, Ângela Maria Grossi De Carvalho, Rosane Aparecida Gomes Battistelle

Journal of Applied Packaging Research

Solid waste generation is estimated to increase from 1.3 billion to 2.2 billion tons by 2025, causing environmental, social, and consequently public health problems. The biggest problem in this regard involves the inadequate disposal of waste, and in emerging countries like Brazil, it is sorted less waste for recycling or composting. In this context, plastic packaging is more complex due to the high polymer composition, as well as low recycling rates. Bioplastics appear as alternatives because they are mostly biodegradable. Given the various functions of packaging and a systematic review of the literature, the aim of this study was to …

Go to article

Synthesis And Characterization Of Polymer-Silica Composite Hydrogel Particles And Influence Of Hydrogel Composition On Cement Paste Microstructure, Matthew J. Krafcik, B Bose, Kendra Erk Mar 2018

Synthesis And Characterization Of Polymer-Silica Composite Hydrogel Particles And Influence Of Hydrogel Composition On Cement Paste Microstructure, Matthew J. Krafcik, B Bose, Kendra Erk

School of Materials Engineering Faculty Publications

The objective of this research is to define the fundamental structure-property relationships of water-swollen polymer hydrogel particles that are employed as internal curing agents in cementitious mixtures, in addition to reporting a novel synthesis procedure for combining pozzolanic materials with hydrogel particles. Solution polymerization was performed to incorporate amorphous nanosilica particles within acrylic-based polymer hydrogel particles of varying chemical compositions (i.e., monomer ratio of acrylic acid (AA) to acrylamide (AM)). Experiments were designed to measure the absorption capacity and kinetics of hydrogel particles immersed in pure water and cementitious pore solution, as well as determine the impact of particles on …

Go to article

Preparation, Modification, Characterization, And Biosensing Application Of Nanoporous Gold Using Electrochemical Techniques, Jay Bhattarai, Dharmendra Neupane, Bishal Nepal, Vasilii Mikhaylov, Alexei Demchenko, Keith Stine Mar 2018

Preparation, Modification, Characterization, And Biosensing Application Of Nanoporous Gold Using Electrochemical Techniques, Jay Bhattarai, Dharmendra Neupane, Bishal Nepal, Vasilii Mikhaylov, Alexei Demchenko, Keith Stine

Chemistry & Biochemistry Faculty Works

Nanoporous gold (np-Au), because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning …

Go to article

Application Of Cross-Linked Polyborosiloxanes And Organically Modified Boron Silicate Binders In Silicon-Containing Anodes For Lithium-Ion Batteries, Darius A. Shariaty, Dali Qian, Yang-Tse Cheng, Susan A. Odom Mar 2018

Application Of Cross-Linked Polyborosiloxanes And Organically Modified Boron Silicate Binders In Silicon-Containing Anodes For Lithium-Ion Batteries, Darius A. Shariaty, Dali Qian, Yang-Tse Cheng, Susan A. Odom

Chemistry Faculty Publications

To determine the effect of cross-linking in polymer binders on gravimetric capacity and retention in charge/discharge cycling of lithium-ion batteries containing silicon anodes, polymers with a varied chemiophysical characters have been studied as electrode binders. Here we report the utilization of cross-linked polyborosiloxanes and a boron-modified organosilicate as binders for nanoparticulate silicon-containing anodes for lithium-ion batteries. We show that highly cross-linked binders enable a large degree of capacity to be accessed and that capacity retention is greater when the electrodes are cycled in half cells. More extensive analysis of the boron-modified organosilicate is further explored.

Go to article

Applications Of Open Source Gmaw-Based Metal 3-D Printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce Mar 2018

Applications Of Open Source Gmaw-Based Metal 3-D Printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce

Department of Materials Science and Engineering Publications

The metal 3-D printing market is currently dominated by high-end applications, which make it inaccessible for small and medium enterprises, fab labs, and individual makers who are interested in the ability to prototype and additively manufacture final products in metal. Recent progress led to low-cost open-source metal 3-D printers using a gas metal arc welding (GMAW)-based print head. This reduced the cost of metal 3-D printers into the range of desktop prosumer polymer 3-D printers. Consequent research established good material properties of metal 3-D printed parts with readily-available weld filler wire, reusable substrates, thermal and stress properties, toolpath planning, bead-width …

Go to article

Supported Perovskite-Type Oxides: Establishing A Foundation For Co2 Conversion Through Reverse Water-Gas Shift Chemical Looping, Bryan J. Hare Mar 2018

Supported Perovskite-Type Oxides: Establishing A Foundation For Co2 Conversion Through Reverse Water-Gas Shift Chemical Looping, Bryan J. Hare

USF Tampa Graduate Theses and Dissertations

Perovskite-type oxides show irrefutable potential for feasible thermochemical solar-driven CO2 conversion. These materials exhibit the exact characteristics required by the low temperature reverse water-gas shift chemical looping process. These properties include structural endurance and high oxygen redox capacity, which results in the formation of numerous oxygen vacancies, or active sites for CO2 conversion. A major drawback is the decrease in oxygen self-diffusion with increasing perovskite particle size. In this study, the La0.75Sr0.25FeO3 (LSF) perovskite oxide was combined with various supports including popular redox materials CeO2 and ZrO2 along with more abundant …

Go to article

Orthogonal Photo-Switching Of Supramolecular Patterned Surfaces, Dongsheng Wang, Frank Schellenberger, Jonathan T. Pham, Hans-Jürgen Butt, Si Wu Mar 2018

Orthogonal Photo-Switching Of Supramolecular Patterned Surfaces, Dongsheng Wang, Frank Schellenberger, Jonathan T. Pham, Hans-Jürgen Butt, Si Wu

Chemical and Materials Engineering Faculty Publications

We used Azo/α-CD and ipAzo/γ-CD host–guest complexes to demonstrate that four independent stable states can be orthogonally photo-switched by UV (365 nm), blue (470 nm), green (530 nm) and red light (625 nm). A supramolecular patterned surface was fabricated and orthogonally photo-switched by light with different wavelengths.

Go to article

Development Of A Resilient 3-D Printer For Humanitarian Crisis Response, Benjamin L. Savonen, Tobias Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Greshonen, Joshua M. Pearce Mar 2018

Development Of A Resilient 3-D Printer For Humanitarian Crisis Response, Benjamin L. Savonen, Tobias Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Greshonen, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Rapid manufacturing using 3-D printing is a potential solution to some of the most pressing issues for humanitarian logistics. In this paper, findings are reported from a study that involved development of a new type of 3-D printer. In particular, a novel 3-D printer that is designed specifically for reliable rapid manufacturing at the sites of humanitarian crises. First, required capabilities are developed with design elements of a humanitarian 3-D printer, which include, (1) fused filament fabrication, (2) open source self-replicating rapid prototyper design, (3) modular, (4) separate frame, (5) protected electronics, (6) on-board computing, (7) flexible power supply, and …

Go to article

Comparison Of Plume Dynamics For Laser Ablated Metals: Al And Ti, William A. Bauer, Glen P. Perram, Timothy Haugan Mar 2018

Comparison Of Plume Dynamics For Laser Ablated Metals: Al And Ti, William A. Bauer, Glen P. Perram, Timothy Haugan

Faculty Publications

Emissive plumes from pulsed laser ablation of bulk Ti and Al from KrF laser irradiation at laser fluence up to 3.5 J/cm2 and argon background pressures of 0–1 Torr have been observed using gated intensified charged-coupled device imagery. Mass loss for Ti increases from 0.1 to 0.8 μg/pulse as pulse energy increase from 174 to 282 mJ/pulse (35–170 photons/atom) and decreases by ∼30% as pressure increases from vacuum to 1 Torr. Early plume energies are described by the free expansion velocities of 1.57 ± 0.02 and of 1.81 ± 0.07 cm/μs for Ti and Al, respectively, …

Go to article

Demonstration Of Versatile Whispering-Gallery Micro-Lasers For Remote Refractive Index Sensing, Lei Wan, Hengky Chandrahalim, Jian Zhou Mar 2018

Demonstration Of Versatile Whispering-Gallery Micro-Lasers For Remote Refractive Index Sensing, Lei Wan, Hengky Chandrahalim, Jian Zhou

Faculty Publications

We developed chip-scale remote refractive index sensors based on Rhodamine 6G (R6G)-doped polymer micro-ring lasers. The chemical, temperature, and mechanical sturdiness of the fused-silica host guaranteed a flexible deployment of dye-doped polymers for refractive index sensing. The introduction of the dye as gain medium demonstrated the feasibility of remote sensing based on the free-space optics measurement setup. Compared to the R6G-doped TZ-001, the lasing behavior of R6G-doped SU-8 polymer micro-ring laser under an aqueous environment had a narrower spectrum linewidth, producing the minimum detectable refractive index change of 4 x 10−4 RIU. The maximum bulk refractive index sensitivity (BRIS) …

Go to article

Understanding Homogeneous Nucleation In Solidification Of Aluminum By Molecular Dynamics Simulations, A. Mahata, Mohsen Asle Zaeem, M. I. Baskes Mar 2018

Understanding Homogeneous Nucleation In Solidification Of Aluminum By Molecular Dynamics Simulations, A. Mahata, Mohsen Asle Zaeem, M. I. Baskes

Materials Science and Engineering Faculty Research & Creative Works

Homogeneous nucleation from aluminum (Al) melt was investigated by million-atom molecular dynamics simulations utilizing the second nearest neighbor modified embedded atom method potentials. The natural spontaneous homogenous nucleation from the Al melt was produced without any influence of pressure, free surface effects and impurities. Initially isothermal crystal nucleation from undercooled melt was studied at different constant temperatures, and later superheated Al melt was quenched with different cooling rates. The crystal structure of nuclei, critical nucleus size, critical temperature for homogenous nucleation, induction time, and nucleation rate were determined. The quenching simulations clearly revealed three temperature regimes: sub-critical nucleation, super-critical nucleation, …

Go to article

A New Hybrid Decision Support Tool For Evaluating The Sustainability Of Mining Projects, S. Kamenopoulos, Zacharias Agioutantis, K. Komnitsas Mar 2018

A New Hybrid Decision Support Tool For Evaluating The Sustainability Of Mining Projects, S. Kamenopoulos, Zacharias Agioutantis, K. Komnitsas

Mining Engineering Faculty Publications

The integration of sustainable development challenges and opportunities into the decision making process during the design and/or implementation of multi-disciplinary mining projects is generally not supported by decision support systems (DSS). A new hybrid decision support tool, which features an integrated assessment of sustainable development issues as they apply to mining projects, is hereby proposed. The proposed DSS framework, named “Acropolis DSS”, can be used to assist involved stakeholders in critical decisions, especially when addressing issues such as stakeholder participation, transparency, and trade-offs. The proposed DSS is based on a multi-criteria decision analysis combined with the multi-attribute utility theory.

Go to article

Nanostructural Origin Of Semiconductivity And Large Magnetoresistance In Epitaxial Nico2O4/Al2O3 Thin Films, Congmian Zhen, Xiaozhe Zhang, Wengang Wei, Wenzhe Guo, Ankit Pant, Xiaoshan Xu, Jian Shen, Li Ma, Denglu Hou Mar 2018

Nanostructural Origin Of Semiconductivity And Large Magnetoresistance In Epitaxial Nico2O4/Al2O3 Thin Films, Congmian Zhen, Xiaozhe Zhang, Wengang Wei, Wenzhe Guo, Ankit Pant, Xiaoshan Xu, Jian Shen, Li Ma, Denglu Hou

Xiaoshan Xu Papers

Despite low resistivity (~1 mΩ cm), metallic electrical transport has not been commonly observed in inverse spinel NiCo2O4, except in certain epitaxial thin films. Previous studies have stressed the effect of valence mixing and the degree of spinel inversion on the electrical conduction of NiCo2O4 films. In this work, we studied the effect of nanostructural disorder by comparing the NiCo2O4 epitaxial films grown on MgAl2O4 (1 1 1) and on Al2O3 (0 0 1) substrates. Although the optimal growth conditions are similar for the …

Go to article

Corrosion Behavior Of Plasma Nitrided And Nitrocarburised Supermartensitic Stainless Steel, Frederico Augusto Pires Fernandes, Carlos Alberto Picone, George Totten, Luiz Carlos Casteletti Mar 2018

Corrosion Behavior Of Plasma Nitrided And Nitrocarburised Supermartensitic Stainless Steel, Frederico Augusto Pires Fernandes, Carlos Alberto Picone, George Totten, Luiz Carlos Casteletti

Mechanical and Materials Engineering Faculty Publications and Presentations

Supermartensitic stainles steels (SMSS's) are a new generation of martensitic steels that have been increasingly used in oil and gas applications due to their adequate corrosion resistance and mechanical properties. In the present study, SMSS specimens (UNS S41425) were solution heat treated and air cooled followed by plasma nitriding and nitrocarburising at 400, 450 and 500°C for 5h. The produced layers were characterized by optical microscopy, microhardness testing, X-ray diffraction and corrosion testing in NaCl 3.5% solution. Surface alloying with nitrogen or both nitrogen and carbon results in increased surface hardness and homogeneous layers in which layer thickness increases with …

Go to article

The Suitability Of Zn–1.3% Fe Alloy As A Biodegradable Implant Material, Alon Kafri, Shira Ovadia, Jeremy Goldman, Jaroslaw W. Drelich, Eli Aghion Feb 2018

The Suitability Of Zn–1.3% Fe Alloy As A Biodegradable Implant Material, Alon Kafri, Shira Ovadia, Jeremy Goldman, Jaroslaw W. Drelich, Eli Aghion

Michigan Tech Publications, Part 1

Efforts to develop metallic zinc for biodegradable implants have significantly advanced following an earlier focus on magnesium (Mg) and iron (Fe). Mg and Fe base alloys experience an accelerated corrosion rate and harmful corrosion products, respectively. The corrosion rate of pure Zn, however, may need to be modified from its reported ~20 µm/year penetration rate, depending upon the intended application. The present study aimed at evaluating the possibility of using Fe as a relatively cathodic biocompatible alloying element in zinc that can tune the implant degradation rate via microgalvanic effects. The selected Zn–1.3wt %Fe alloy composition produced by gravity casting …

Go to article

Superhydrophobic Surface On Aluminum Alloy By Hydrothermal Method And Its Electrochemical Performance, Xiao-Hang Chen, Mo-Jing Chen, Yu-Lin Min, Qun-Jie Xu Feb 2018

Superhydrophobic Surface On Aluminum Alloy By Hydrothermal Method And Its Electrochemical Performance, Xiao-Hang Chen, Mo-Jing Chen, Yu-Lin Min, Qun-Jie Xu

Journal of Electrochemistry

Superhydrophobic film formed on a metal surface is an effective way for corrosion protection. In this paper, the superhydrophobic film was prepared on the surfaces of aluminum alloy by hydrothermally treating with a solution containing CeCl3·7H2O and CO(NH2)2 , and a self-assemble process. The electrochemical measurements and surface morphology results confirmed that the best superhydrophobicity and electrochemical performance could be achieved with the contact angle of 155.5o after six hours of hydrothermal reaction. Furthermore, the inhibition efficiency of 99.6% was obtained in 3.5 wt% NaCl aqueous solution, indicating the excellent corrosion resistance …

Go to article

Synthesis And Electrochemical Properties Of Nickel-Rich Cathode Material Lini0.6Co0.2Mn0.2O2 With High Initial Coulombic Efficiency, Xiao-Yun Guan, Chao-Yu Hong, Jian-Ping Zhu, Wei-Li Wang, Yi-Xiao Li, Yong Yang Feb 2018

Synthesis And Electrochemical Properties Of Nickel-Rich Cathode Material Lini0.6Co0.2Mn0.2O2 With High Initial Coulombic Efficiency, Xiao-Yun Guan, Chao-Yu Hong, Jian-Ping Zhu, Wei-Li Wang, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

Nickel-rich cathode materials LiNi0.6Co0.2Mn0.2O2(NCM622)were synthesized by a co-precipitation-solid state sintering method at different temperatures. The structure, morphology and electrochemical performance of the as-prepared materials were investigated by X-ray powder diffraction (XRD) /Rietveld refinement, scanning electron microscope (SEM) and electrochemical experiments. It is found that NCM622 calcined at 800 ℃ showed the lowest degree of cation disorder (~1.97%) with a high initial Coulombic effiency of 92.2% and the capacity retention of 81.4% after 100 cycles.

Go to article

Preparation And Characterization Of Titanate-Phosphate Passivation Film On Tinplate, Zi-Yu Wang, Ming-Hao Wang, De-Yu Li, Ning Li Feb 2018

Preparation And Characterization Of Titanate-Phosphate Passivation Film On Tinplate, Zi-Yu Wang, Ming-Hao Wang, De-Yu Li, Ning Li

Journal of Electrochemistry

A passivation film was prepared on tinplate surface with a composite passivating agent made of titanate and phosphate. The surface morphologies, chemical compositions and corrosion resistances of the passivation films were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), salt spray test, Tafel polarization measurement and electrochemical impedance spectroscopy (EIS). The results were compared with those films untreated and treated with titanate or phosphate passivation. It was shown that the titanate and phosphate passivation film was mainly composed of Ti3(PO4)4·nH2O and TiO2. The finely crystallized surface could seal …

Go to article

Preparation And Properties Of Nanocrystalline Nickel By Pulse Electrodeposition On Glassy Carbon, Ya-Li Zhang, Ming-Xian Zhang, Teng-Da Guo, Yan-Jie Zhao, Sheng-Xue Yu Feb 2018

Preparation And Properties Of Nanocrystalline Nickel By Pulse Electrodeposition On Glassy Carbon, Ya-Li Zhang, Ming-Xian Zhang, Teng-Da Guo, Yan-Jie Zhao, Sheng-Xue Yu

Journal of Electrochemistry

Nanocrystalline nickel exhibits electrocatalytic activity for methanol. In this work, nanocrystalline nickel coating has been obtained by using the double pulse method on glassy carbon materials surface. The influence of pulse conditions on the grain size of nanocrystalline nicke was studied. The concentrations and compositions of the plating bath were  300 g·L-1 NiSO4·6H2O,45 g·L-1 NiCl2·6H2O,40 g·L-1 H3BO3,5 g·L-1 C7H5NO3S,and 0.05 g·L-1 C12H25NaO4S. The optimal pulse process parameters including the average pulse …

Go to article

Electrodeposition Of Cigs Thin Film With Special Structure Using Laser Etching Template, Jin-Zhi Yu, Ye Lian, Jin-Qiu Zhang, Pei-Xia Yang, Mao-Zhong An Feb 2018

Electrodeposition Of Cigs Thin Film With Special Structure Using Laser Etching Template, Jin-Zhi Yu, Ye Lian, Jin-Qiu Zhang, Pei-Xia Yang, Mao-Zhong An

Journal of Electrochemistry

Copper indium gallium selenide (Cu1.00InxGa1-xSe2.00, CIGS) thin film solar cells have a wide application in semiconductor thin film batteries. The CIGS absorbing layer is the key of the thin film solar cell material. Therefore, it is of theoretical and practical significance to carry out researches in CIGS thin films. In this work, the CIGS thin films with special structures were prepared by using laser etching template. The copper thin film was firstly electrodeposited in aqueous solution with Laser etching template. The influences of temperature, current and concentration of copper sulfate on morphology …

Go to article

Preparation And Electrocatalytic Activity Of Nitrogen-Doping Tungsten Carbide Catalyst, Pian-Pian Yang, Li-Zhen Huang, Ying-Ying Li, Mei-Qin Shi, Chun-An Ma Feb 2018

Preparation And Electrocatalytic Activity Of Nitrogen-Doping Tungsten Carbide Catalyst, Pian-Pian Yang, Li-Zhen Huang, Ying-Ying Li, Mei-Qin Shi, Chun-An Ma

Journal of Electrochemistry

Tungsten carbide (WC) is a promising electrocatalyst, however, its electrocatalytic activity is far inferior to Pt and Pt-group metal. In this work, nitrogen-doping tungsten carbide (WN|WC) catalysts with a nanoplate morphology were prepared via the tungsten nitride (WN) as the precursor and sodium tungstate as the tungsten source. The SEM and TEM results indicated that carbon atoms entered into the WN lattice to form the hexagonal close packed WC phase. In this way, an atomic scale heterostructure involving the closely linked interfaces between WN and WC was created . The XRD data confirmed that the cubic crystal structure of WN …

Go to article

Intrinsic Kinetic Properties Of Ternary Material For Lithium Ion Batteries Assessed By Single Particle Microelectrode, Yi-Min Wei Feb 2018

Intrinsic Kinetic Properties Of Ternary Material For Lithium Ion Batteries Assessed By Single Particle Microelectrode, Yi-Min Wei

Journal of Electrochemistry

Electrochemical performances such as capacity, rate, cycle and thermal stability of the nickel (Ni), cobalt (Co) and manganese (Mn) ternary cathode material, LiNixCoyMnzO2 (x + y + z = 1), are significantly influenced by the proportion of Ni, Co, and Mn elements. To obtain higher specific capacity, LiNi0.6Co0.2Mn 0.2O2 (NCM622) and LiNi0.8Co0.1Mn0.1O2 (NCM811) with high amounts of Ni element were employed for the lithium ion batteries. By now, many studies have been focusing on the thermal and cycling stabilities of …

Go to article

An Electrochemical Investigation In The Anticorrosive Properties Of Silver Nanoparticles For The Acidic Corrosion Of Aluminium, H. A. Fetouh, B. A. Abd-El-Nabey, Y. M. Goher, M. S. Karam Feb 2018

An Electrochemical Investigation In The Anticorrosive Properties Of Silver Nanoparticles For The Acidic Corrosion Of Aluminium, H. A. Fetouh, B. A. Abd-El-Nabey, Y. M. Goher, M. S. Karam

Journal of Electrochemistry

The mass loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were used for the determinations of the corrosion rates for aluminium in 1.0 mol·L-1 hydrochloric acid (HCl) solutions both in the absence and presence of silver nanoparticles (SNPs) at 30 ℃. The protection efficiency was evaluated to be 96.4% for 0.014 g·L-1 of the SNPs. It has been found that the capacity of the electrical double layer at the aluminium/solution interface was decreased with increasing the concentration of the SNPs, indicating that the SNPs were adsorbed at the aluminium surface. The Langmuir adsorption isotherm and the kinetic-thermodynamic …

Go to article

First Prev Next Last