Materials Science and Engineering Commons^™

Development Of Enhanced Window Layers For Cigs Photovoltaic Devices, James Nicholas Alexander

Legacy Theses & Dissertations (2009 - 2024)

Photovoltaic devices are among the promising options for sustainable future energy generation. Thin film solar cells have demonstrated the ability to be a low-cost solution to clean renewable energy and are cost competitive with current silicon based photovoltaic devices. One of the most promising thin film devices right now is the Copper Indium Gallium Selenide (CIGS) solar cell with maximum reported power conversion efficiency of 22.3%. The Transparent Conducting Oxide (TCO) which is the top layer of the CIGS device also known as the window layer, is responsible for collecting the electrons generated in the CIGS device and conducting them …

Degradation And Exciton Energy Transfer Studies In Single-Walled Carbon Nanotube Bundles, Abhishek Gottipati

Legacy Theses & Dissertations (2009 - 2024)

Single walled carbon nanotubes (SWNTs) due to their unique optical behavior, large surface area, robust mechanical strength and electrical properties make them one of the ideal candidates for sensing and opto-electronic applications. In this work, we explore the energy transfer (exciton energy transfer-EET) phenomena occurring between nanotubes in bundles, using resonance Raman spectroscopy.

Tailoring The Optical Properties Of Silicon With Ion Beam Created Nanostructures For Advanced Photonics Applications, Perveen Akhter

Legacy Theses & Dissertations (2009 - 2024)

In today’s fast life, energy consumption has increased more than ever and with that the demand for a renewable and cleaner energy source as a substitute for the fossil fuels has also increased. Solar radiations are the ultimate source of energy but harvesting this energy in a cost effective way is a challenging task. Si is the dominating material for microelectronics and photovoltaics. But owing to its indirect band gap, Si is an inefficient light absorber, thus requiring a thickness of solar cells beyond tens of microns which increases the cost of solar energy. Therefore, techniques to increase light absorption …

Magnetoresistance Of A Low-K Dielectric, Brian Thomas Mcgowan

Legacy Theses & Dissertations (2009 - 2024)

Low-k dielectrics have been incorporated into advanced computer chip technologies as a part of the continuous effort to improve computer chip performance. One drawback associated with the implementation of low-k dielectrics is the large leakage current which conducts through the material, relative to silica. Another drawback is that the breakdown voltage of low-k dielectrics is low, relative to silica [1]. This low breakdown voltage makes accurate reliability assessment of the failure mode time dependent dielectric breakdown (TDDB) in low-k dielectrics critical for the successful implementation of these materials. The accuracy with which one can assess this reliability is currently a …

Development Of Iii-Sb Based Technologies For P-Channel Mosfet In Cmos Applications, Shailesh Kumar Madisetti

Legacy Theses & Dissertations (2009 - 2024)

The continuous scaling of silicon CMOS predicts the end of roadmap due to the difficulties such as that arise from electrostatic integrity, design complexities, and power dissipation. These fundamental and practical limitations bring the need for innovative design architectures or alternate materials with higher carrier transport than current Si based materials. New device designs such as multigate/gate-all-around architectures improve electrostatics while alternate materials like III-Vs such as III-As for electrons and III-Sbs for holes increase operational speed, lower power dissipation and thereby improve performance of the transistors due to their low effective mass and faster transport properties. Further, application of …

Increasing Solar Energy Conversion Efficiency In Hydrogenated Amorphous Silicon Photovoltaic Devices With Plasmonic Perfect Meta – Absorbers, Jephias Gwamuri

Dissertations, Master's Theses and Master's Reports

Solar photovoltaic (PV) devices are an established, technically-viable and sustainable solution to society’s energy needs, however, in order to reach mass deployment at the terawatt scale, further decreases in the levelized cost of electricity from solar are needed. This can be accomplished with thin-film PV technologies by increasing the conversion efficiency using sophisticated light management methods. This ensures absorption of the entire solar spectrum, while reducing semiconductor absorber layer thicknesses, which reduces deposition time, material use, embodied energy and greenhouse gas emissions, and economic costs. Recent advances in optics, particularly in plasmonics and nanophotonics provide new theoretical methods to improve …

Mechanical Testing Of Fused Filament 3-D Printed Components For Distributed Manufacturing, Nagendra Gautam Tanikella

Dissertations, Master's Theses and Master's Reports

Fused filament fabrication (FFF)-based open-source 3-D printers offer the potential of decentralized manufacturing both in developing and developed countries. Unfortunately, a severe lack of data and standards relating to material properties and printed components limit this potential. This thesis first investigates the mechanical properties of a wide-range of FFF materials and provides a database of mechanical strength of the materials tested. The results demonstrate that the tensile strength of a 3-D printed specimen depends largely on the mass of the specimen, which provides a means to estimate the strength of 3-D printed components. Then this information is used to evaluate …

Thermomechanical Processing Of Aluminum Micro-Alloyed With Sc, Zr, Ti, B, And C, Cameron Mcnamara

Dissertations, Master's Theses and Master's Reports

Critical exploration of the minimalistic high strength low alloy aluminum (HSLA-Al) paradigm is necessary for the continued development of advanced aluminum alloys. In this study, scandium (Sc) and zirconium (Zr) are examined as the main precipitation strengthening additions, while magnesium (Mg) is added to probe the synergistic effects of solution and precipitation hardening, as well as the grain refinement during solidification afforded by a moderate growth restriction factor. Further, pathways of recrystallization are explored in several potential HSLA-Al systems sans Sc. Aluminum-titanium-boron (Al-Ti-B) and aluminum-titanium-carbon (Al-Ti-C) grain refining master alloys are added to a series of Al-Zr alloys to examine …

Computation Aided Design Of Multicomponent Refractory Alloys With A Focus On Mechanical Properties, Paul Daniel Clark

Electronic Theses and Dissertations

Quantum mechanical calculations paired with exponential growth in computer processing speed has created a paradigm shift in materials discovery. Simulations can be carried out to accurately predict structure-composition-property relationships of novel systems. This work focuses on calculating elastic properties of high entropy alloys, a new class of alloys that are built from 4+ elements in equi-atomic proportion. These alloys often exhibit simple microstructures and each constituent element contributes its properties to the overall bulk properties of the amalgamated material. This "cocktail" effect has led to the discovery of many alloys which could drive technical advances in the future. Elastic properties …

Enhancement Of Cancer Vaccine Efficacy Via Nanoparticle Or Molecular-Based Adjuvants, Myunggi An

Wayne State University Theses

Adjuvants are immunomodulators which enhance immune responses to vaccines. However, parenteral administration of unformulated adjuvants fails to reach lymph nodes (LNs), the anatomic organ where the primary functions of immune cells are orchestrated. The LN-targeting delivery plays the key roles in promoting immune activation and has the great potential to transform disease treatment. The main goal of this thesis is to develop efficient vaccine delivery systems to target therapeutics into draining lymph nodes (dLNs) for ensuring their immunostimulatory activity. We introduced therapeutic applications of activating TLR9 with synthetic CpG oligodeoxynucleotide (ODN) agonists in nanoparticle or molecular form to activate immune …

Novel Design And Synthesis Of Transition Metal Hydroxides And Oxides For Energy Storage Device Applications, Peifeng Li

Wayne State University Theses

Supercapacitors (SCs) and Li-ion batteries (LIBs) are two types of important electrical energy storage devices with high power density and high energy density respectively. However, to satisfy the increasing demand of high-performance energy storage devices, the energy density of SCs and power/energy densities of LIBs have to be further improved. The exploration, research, and development of electrode materials with high-performance for applications in SCs and LIBs are still needed to meet the ever-increasing demand on energy and power densities. Herein, the amorphous Ni-Co-Mo ternary hydroxides nanoflakes for SCs and oxides nanoflakes for LIBs with ultrathin stature, abundant open spaces, and …

Effect Of Powder Particle Size On The Fabrication Of Ti-6al-4v Using Laser Metal Deposition From Elemental Powder Mixture, Xueyang Chen, Lei Yan, Wei Li, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Direct LMD (laser metal deposition) was used to fabricate thin-wall Ti-6Al-4V using the powder mixture of Ti-6 wt.%Al-4 wt.%V. SEM (scanning electron microscopy), OM (optical microscopy) and EDS (energy dispersive spectroscopy) were employed to examine the chemical composition and microstructure of the as-deposited sections. Vickers hardness tests were then applied to characterize the mechanical properties of the deposit samples which were fabricated using pre-mixed elemental powders. The EDS line scans indicated that the chemical composition of the samples was homogenous across the deposit. After significant analysis, some differences were observed among two sets of deposit samples which varied in the …

Bioluminescent Magnetic Nanoparticles As Potential Imaging Agents For Mammalian Spermatozoa, Erick Salvador Vasquez, Jean M. Feugang, Scott T. Willard, Peter L. Ryan, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Background: Nanoparticles have emerged as key materials for developing applications in nanomedicine, nanobiotechnology, bioimaging and theranostics. Existing bioimaging technologies include bioluminescent resonance energy transfer-conjugated quantum dots (BRET-QDs). Despite the current use of BRET-QDs for bioimaging, there are strong concerns about QD nanocomposites containing cadmium which exhibits potential cellular toxicity.

Results: In this study, bioluminescent composites comprised of magnetic nanoparticles and firefly luciferase (Photinus pyralis) are examined as potential light-emitting agents for imaging, detection, and tracking mammalian spermatozoa. Characterization was carried out using infrared spectroscopy, TEM and cryo-TEM imaging, and ζ-potential measurements to demonstrate the successful preparation of these nanocomposites. Binding …

Uv Light-Induced Aggregation Of Titania Submicron Particles, Can Zhou, Yashar Bashirzadeh, Timothy A. Bernadowsky Jr., Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

In this study, aggregation of TiO₂ (rutile and anatase) submicron particles in deionized (DI) water under ultra-violet (UV) light irradiation was investigated. While no aggregation was observed in the dark, rutile and anatase submicron particles started aggregating upon application of UV light and ceased aggregation in about 2 and 8.4 h, respectively. It has been demonstrated that UV light directly mitigated the particle mobility of TiO₂, resulting in a neutralization effect of the Zeta potential. It was also observed that rutile particles aggregated much faster than anatase particles under UV radiation, indicating that the Zeta potential of …

A Cracking Methodology To Assess Fracture And Fatigue Properties Of Asphalt Concrete Mixtures Using Overlay Tester, Victor M. Garcia

Open Access Theses & Dissertations

Several highway agencies have either implemented or considered implementing performance tests to predict the cracking potential of asphalt concrete (AC) mixtures in the laboratory setting. One such test, the Overlay Tester (OT) test, measures the number of cycles to failure of the AC specimens by simulating the opening and closing of the cracks induced by daily temperature variations and high tensile strain generated by the traffic load. The variability of the OT test results is expressed as a major concern in reliably characterizing the cracking potential of the AC mixes.

The performance of the OT test, in general, and current …

Liquid-Phase Exfoliation Of Two-Dimensional Graphite For Ink-Jet Printing, Monica Michel

Open Access Theses & Dissertations

Over the last decade, the study of two-dimensional (2D) materials has seen an incredible growth due to their unique thermal, mechanical and electronic properties. Solution phase manufacturing offers a way in which they can be produced at large scale by creating dispersions from the exfoliated material. Once created, different options for assembling devices exist. One technique for large scale manufacturing of materials in this form is ink-jet printing, which is a form of additive manufacturing that has proven to be attractive for the printed electronics industry. One challenge that ink-jet printing still faces is the shortage of inks with appropriate …

Fiberglass Goes Green: Developing Phosphate Glass For Use In Biodegradable Composites, Christina Lee Arendt

Open Access Theses & Dissertations

Composite materials, such as the glass fiber reinforced polyester thermosets known as "fiberglass," are used in many applications. However, recycling processes for these materials are inefficient and not widely available. Specially engineered degradable polymers offer an opportunity to redesign these composites. Additionally, the composite could be tailored to be multi-use, such that upon degradation, the resulting products could be used as part of a zeoponic substrate (artificial soil) for growing plants. Such a material would be beneficial for long-duration space missions, terraforming, or in other agricultural applications.

The research presented in this Dissertation focuses on developing phosphate glass for use …

Yttria Rich Tbcs As Candidates For Cmas Resistant Top Coats, Juan Jose Gomez

Open Access Theses & Dissertations

State of the art thermal barrier coatings (TBC) commonly made of 7-8 wt. % yttria stabilized zirconia (7YSZ) are used in modern gas turbines to generate a thermal protection to the underlying super alloy components. TBCs allow higher operating temperatures for hot gas path components, thus, generating higher engine efficiency. The infiltration of molten glassy mineral deposits composed of CaO-MgO-Al2O3-SiO2 (CMAS) represents one of the major threats in reducing performance and service life in aero and land based gas turbine engines. The CMAS deposits are ingested into the engine carried commonly in sand, runways debris, fly ash and volcanic ash. …

Synthesis, Device Fabrication, And Characterization Of Two-Dimensional Molybdenum Disulfide, Gustavo Alberto Lara Saenz

Open Access Theses & Dissertations

The miniaturization of electronic devices according to Moore's Law has been propelled by the continuous demand for faster and smaller devices which continue to advance technology. One recent contribution to this trend was the isolation and characterization of one atom thick of graphite, known as graphene, which led to the Nobel Prize in physics in 2010 being awarded to Andre Geim and Konstantin Novoselov. Graphene and its related nanocarbon derivatives have exceptional mechanical, thermal, optical and electronic properties, making them a potential candidate for electronics and optoelectronics applications. However, this material has no intrinsic bandgap and complicated processes are required …

Improving The Engineering Properties Of Pla For 3d Printing And Beyond, Carmen R. Rocha

Open Access Theses & Dissertations

Additive manufacturing (AM), now more commonly known as 3D printing, has been classified as efficient, fast, and practical in the prototyping sector of product development. In the work presented here, we will use one of the AM techniques known as Material extrusion 3D printing (ME3DP), which has all the advantages of AM. However, one of the biggest challenges facing ME3DP technologies is the limitation of the range of materials used by this technique. Acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) are currently the most common thermoplastics materials used in ME3DP because of their ability to melt and be reprocessed. …

Characterization Of Dispersion And Residual Stress In Nanoparticle Reinforced Hybrid Carbon Fiber Composites, Alex Selimov

Honors Undergraduate Theses

Hybrid carbon fiber reinforced composites are a new breed of materials that are currently being explored and characterized for next generation aerospace applications. Through the introduction of secondary reinforcements, such as alumina nanoparticles, hybrid properties including improved mechanical properties and stress sensing capabilities can be achieved. In order to maximize these properties, it is necessary to achieve a homogeneous dispersion of particulate filler. Utilizing the photoluminescent properties of alumina, it is possible to compare local levels of particle concentration through emission intensities as a way to determine the effectiveness of the tested manufacturing parameters in increasing material homogeneity. Parameters of …

Evaluation Of Flocculation, Sedimentation, And Filtration For Dewatering Of Algal Biomass, Nicholas A. Rhea

Theses and Dissertations--Biosystems and Agricultural Engineering

Algae can be used as a feedstock for agricultural fertilizers, livestock/poultry feeds, anaerobic digestion, and biofuel production. Regardless of the end product, water removal is necessary and difficult to do cost effectively. For each product the requirements for moisture content (or solids content) vary, such that a desirable water removal strategy would need to be adaptable to varying levels of water removal. Flocculation, with sedimentation and drying was evaluated as a possible strategy for algae dewatering. Anionic and nonionic flocculants are known to be ineffective at flocculating algal culture, which was confirmed for this case by electro-osmotic flow testing of …

Cryogenic Processing Of Al 7050-T7451 Alloy For Improved Surface Integrity, Bo Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Al 7050-T7451 alloy with good combinations of strength, stress corrosion cracking resistance and toughness, is used broadly in the aerospace/aviation industry for fatigue-critical airframe structural components. However, it is also considered as a highly anisotropic alloy as the crack growth behavior along the short transverse direction is very different from the one in the long transverse direction, due to the inhomogeneous microstructure with the elongated grains distributed in the work material used in the sheet/plate applications. Further processes on these materials are needed to improve its mechanical and material properties and broaden its applications.

The material with ultra-fine or nano …

Stress-Induced Phase Change Sintering: A Novel Approach To The Fabrication Of Barium Chloride Transparent Ceramic Scintillators, William Shoulders

Electronic Theses and Dissertations

For the precise in-field identification of dangerous radioisotopes, the desire for higher resolution, cheaper, and more rugged gamma-ray scintillator detectors has pushed the materials science community to investigate new compounds and processing techniques.  One particular solution is Eu:BaCl2 transparent ceramics processed by the novel phase-change sintering technique. Typically, optical transparency in BaCl2 would be limited by birefringence scattering at grain boundaries due to mismatch in refractive index. Traditional ceramic processing routes would also predispose this volatile and hygroscopic material to the formation of defects, which interrupt the energy transfer in the scintillation process. Literature shows that these challenges have prevented …

Interdiffusion, Crystallography And Mechanical Properties Of Nickel Manganese Gallium Alloys, Le Zhou

Electronic Theses and Dissertations

NiMnGa Heusler alloys, functioning as either ferromagnetic shape memory alloys or mangetocaloric materials, have both practical applications and fundamental research value. The functional properties of NiMnGa alloys are closely related to the martensitic transformation from high temperature austenitic phase to low temperature martensitic phase. Alloys can be used for room temperature or high temperature applications, depending on the martensitic transformation temperature, which is compositional sensitive. The microstructure and crystallography of the martensites can be very complex but are crucial to the optimization of the material performance. In this study, for the first time, a combinatorial study by combining solid-to-solid diffusion …

Nanoengineered Energy Harvesting And Storage Devices, Chao Li

Electronic Theses and Dissertations

Organic and perovskite solar cells have recently attracted significant attention due to its flexibility, ease of fabrication and excellent performance. In order to realize even better performance for organic and perovskite solar cells, rejuvenated effort towards developing nanostructured electrodes and high quality active layer is necessary. In this dissertation, several strategic directions of enhancing the performance of organic and perovskite solar cells are investigated. An introduction and background of organic and perovskite solar cells, which includes motivation, classification and working principles, nanostructured electrode materials and solvent effect on active materials, and devices fabrication, are presented. A facile method, called Spin-on …

Electrical Properties Of Polymer-Derived Silicoaluminum Carboxide Ceramics (Sialco) And Their Applications In Micro-Sensors, Yejie Cao

Electronic Theses and Dissertations

Polymer-derived ceramic (PDC) is a new kind of material which is directly synthesized by the thermal decomposition of polymer precursors. Due to their unique structure, which consists of the amorphous matrix phase and free-carbon phase, PDCs exhibit many distinguished properties even at high-temperature environment such as oxidation and creep resistance, amorphous semiconducting behavior as well as piezoresistive behavior. These outstanding properties make PDCs become promising candidates for various applications especially for high-temperature microsensors. However, most common used PDCs in the market now are SiC, SiCN and Si(M)CN ceramics, the high price and toxicity of their raw materials as well as …

Synthesis And Characterization Of Stable And Metastable Phases In Ni- And Fe-Based Alloy Systems By Mechanical Alloying, Ahmed Al-Joubori

Electronic Theses and Dissertations

Mechanical Alloying (MA) is a process that involves repeated cold welding, fracturing and rewelding of powder particles in a high-energy ball mill and has been used extensively to synthesize both stable (equilibrium) and metastable phases in a number of alloy systems. This is due to its ability to achieve many effects simultaneously, viz., reduction in grain size, introduction of a variety of crystal defects, disordering of the lattice, and modifying the crystal structures of materials; all these allowing alloying and phase transformations to occur in powders. In this Dissertation, we have synthesized a number of different alloy phases in Ni- …

A Study Of Crystallization Behavior In Phase Separated Chalcogenide Glasses, Andrew Buff

Electronic Theses and Dissertations

Chalcogenide glasses (ChG) are known for their wide transmission ranges in the infrared and for their high refractive indices. However, applications for ChG are often limited by their poor thermal/mechanical properties. Precipitating a secondary crystalline phase in the glass matrix can improve these properties, but too much crystallization and/or large or multiple phase crystallites can lead to a loss in infrared (IR) transmission. Controlled crystallization can be used to tune the properties of these glasses. This work examines the crystallization behavior in phase separated chalcogenide glasses in the GeSe2-As2Se3-PbSe glass system. Specifically, the research presented in this thesis work has …

Fabrication And Investigation Of An Enzyme-Free, Nanoparticle-Based Biosensor For Hydrogen Peroxide Determination, Craig Neal

Electronic Theses and Dissertations

Electrochemical biosensors often employ enzymes as detection elements. These sensors are highly selective towards target analytes, however the scope of their application is limited by the poor stability of the enzyme. In this study, multi-valent inorganic cerium oxide nanoparticles were used as detection elements for the analysis of hydrogen peroxide. The electrochemical response of the cerium oxide towards hydrogen peroxide analyte is defined through cyclic voltammetry and chronoamperometry. This response was found to be dependent on nanoparticle Ce3+:Ce4+ redox state ratio and this property is exploited to fabricate a biosensor. As produced, the biosensor demonstrated sensitivity at picomolar analyte concentrations. …