Materials Science and Engineering Commons^™

Low-Symmetry Monoclinic Ferroelectric Phase Stabilized By Oxygen Octahedra Rotations In Strained Euₓsr₁₋ₓtio₃ Thin Films, Anna N. Morozovska, Yijia Gu, Victoria V. Khist, Maya D. Glinchuk, Long-Qing Chen, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

Using Landau-Ginzburg-Devonshire theory and phase-field modeling, we explore the complex interplay between a structural order parameter (oxygen octahedron rotation) and polarization in Eu_xSr_1-xTiO₃ thin films. Under a biaxially tensile strain, a low-symmetry monoclinic phase with in-plane ferroelectric polarization is found to be stabilized by antiferrodistortive oxygen octahedra tilts. The monoclinic phase is stable over a wide temperature range. It is characterized by a large number of energetically equivalent polar and structural twin domains. This work demonstrates the development of a spontaneous polarization and piezo- and pyroelectricity in a ferroelastic twin boundary arising from flexoelectric coupling …

Superplasticity And Microstructural Stability In A Mg Alloy Processed By Hot Rolling And Friction Stir Processing, V. Jain, R. S. Mishra, R. Verma, E. Essadiqi

Materials Science and Engineering Faculty Research & Creative Works

The superplastic behavior of a Mg-1.2 Zn-1.7 Y-0.53 Al-0.27 Mn alloy sheet processed by hot rolling and friction stir processing (FSP) was investigated. The kinetics of superplastic deformation were compared with Mg-3 Al-1 Zn and other Mg-Zn-Y alloys processed by different methods. The FSP Mg-1.2 Zn-1.7 Y-0.53 Al-0.27 Mn alloy exhibits slower kinetics of deformation compared with other alloys. The microstructural stability of the FSP Mg-1.2 Zn-1.7 Y-0.53 Al-0.27 Mn alloy is better than the Mg-3 Al-1 Zn alloy because of the presence of different types of precipitates. © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Biodiesel Reactor Design With Glycerol Separation To Increase Biodiesel Production Yield, Budy Rahmat, Imas Siti Setiasih, Roni Kastaman

Makara Journal of Technology

The study consisted of reactor design used for transesterification process, effect of glycerol separation on transesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed by integrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that the reactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, …

Development Of Seebeck-Coefficient Measurement Systems Using Kelvin-Probe Force Microscopy, Kazutoshi Miwa, Faiz Salleh, Hiroya Ikeda

Makara Journal of Technology

Thermoelectric device is investigated by a number of researchers in order to enhance the thermoelectric efficiency. It is known that the efficiency can be improved by quantum effect. However, it is difficult to measure the thermoelectric characteristics of nanometer-scale structures. Thus a new measurement method is expected to be developed. We propose to apply Kelvin-probe force microscopy (KFM) to characterization of thermoelectric materials. KFM can locally observe surface potential of Fermi energy of a sample without touching the sample surface. In the present paper, we estimate the Seebeck coefficient of thin Si-on-insulator layers using KFM.

Compositional And Structural Analysis Of Nitrogen Incorporated And Ion Implanted Diamond Thin Films, Elias James Garratt

Dissertations

Significant progress in area of nano-structured thin film systems has taken place in recent decades. In particular, diamond thin film systems are being widely studied for their wear resistant, optical and electronic properties. Of the various methods researchers use to modify the structure of such films, three techniques in particular are of interest due to their versatility: modification of the growth atmosphere, growth on metalized substrates, providing an interfacial layer, and modification through post-growth ion implantation. The aim of this study is to investigate the effects each has to the structure and composition of elements. Different techniques are applied in …

Agricultural Drought Pattern In West Java Using Thermal Vegetation Index From Modis-Terra Satellite, Dini Daruati, Rahmatulloh Rahmatulloh, Sri Hardiyanti Purwadhi

Makara Journal of Technology

This study examines agricultural drought paddy fields in West Java. The aims of this research are to know the pattern and distribution of paddy field drought in West Java and the correlation between drought and the physical characteristics. The agricultural drought is obtained from TVI (Thermal Vegetation Index) model. TVI is derived from MODIS Terra satellite image, which is the ratio between the LST (Land Surface Temperature) and EVI (Enhanced Vegetation Index). Physical factors studied are rainfall, l slope, geomorphology, soil drainage, and irrigation areas. The most severe drought occurred in September 2006 because of El Nino, covering 806,564 ha, …

Growth Of Crsi2 Nanostructures Using Crcl2 Powder On Si Substrates, Wen Li, Meng Erchao, Tomoji Matsushita, Shingo Oda, Daisuke Ishikawa, Kaito Nakane, Hirokazu Tatsuoka

Makara Journal of Technology

Chromium disilicide (CrSi2) nanostructures were grown by the exposure of Si (111) substrates to CrCl2 vapor in an argon gas flow at atmospheric pressure without using any metal catalyst. Dependence of the growth condition on the structural property was investigated. Hexagonal-shaped CrSi2 microrods were grown at 750 °C with 0.05 g of CrCl2. As the quantity of CrCl2 increased to 0.1 g, the bundle of CrSi2 nanowires with microrods and web-liked CrSi2 nanostructure with turning angles were grown at 750 °C and 700 °C, respectively. The preliminary discussion on the growth mechanism of CrSi2 micro- and nanostructures was carried out.

Biological Pretreatment Of Oil Palm Frond Fiber Using White-Rot Fungi For Enzymatic Saccharification, Euis Hermiati, Sita Heris Anita, Lucky Risanto, Dyah Styarini, Yanni Sudiyani, Achmad Hanafi, Haznan Abimanyu

Makara Journal of Technology

Oil palm frond is one type of lignocellulosic biomass abundantly and daily available in Indonesia. It contains cellulose which can be converted to glucose, and further processed to produce different kinds of value –added products. The aim of this research is to study the effects of biological pretreatment of oil palm frond (OPF) fiber using Phanerochaete chrysosporium and Trametes versicolor on the enzymatic saccharification of the biomass. The OPF fiber (40-60 mesh sizes) was inoculated with cultures of the two fungi and incubated at 27 °C for 4 weeks. The samples were taken after 1, 2, 3, and 4 weeks …

Electromagnetic Simulation For Thz Antenna-Coupled Microbolometers Operated At Room Temperature, Makoto Aoki, Masanori Takeda, Norihisa Hiromoto

Makara Journal of Technology

Room-temperature terahertz (THz) detectors with higher performance are necessary for utilizing the THz wave in various sensing, spectroscopy and imaging, but even the best ones in the present are still insufficient for the practical applications. This issue is essential especially in the region around 1 THz at which there exists a large technology gap between microwave and middle-infrared. Therefore, we study to develop an antenna-coupled microbolometer to achieve a high-performance THz detector operated at a room-temperature for sensing at around 1 THz frequency wave. In this paper, we present several important features and results obtained from electromagnetic simulations, which help …

Analysis Of Hole Lifetime In Soi Mosfet Single-Photon Detector, Dedy Septono Catur Putranto, Wei Du, Hiroaki Satoh, Atsushi Ono, Purnomo Sidi Priambodo, Djoko Hartanto, Hiroshi Inokawa

Makara Journal of Technology

Hole lifetime in the silicon-on-insulator (SOI) metal-oxide-semiconductor field-effect transistor (MOSFET) singlephoton detector was evaluated by the analysis of drain current histograms for different light intensities and substrate voltages. It was found that the peaks in the histogram corresponding to the larger number of stored holes grew as the gate bias decreased. This was attributed not to the increased light absorption efficiency or collection efficiency of the photo-generated holes, but to the prolonged hole lifetime presumably caused by the higher transverse electric field inside the body of SOI MOSFET.

Recognition System Of Indonesia Sign Language Based On Sensor And Artificial Neural Network, Endang Supriyati, Mohammad Iqbal

Makara Journal of Technology

Sign language as a kind of gestures is one of the most natural ways of communication for most people in deaf community. The aim of the sign language recognition is to provide a translation for sign gestures into meaningful text or speech so that communication between deaf and hearing society can easily be made. In this research, the Indonesian sign language recognition system based on flex sensors and an accelerometer is developed. This recognition system uses a sensory glove to capture data. The sensor data that are processed into feature vector are the 5-fingers bending and the palm acceleration when …

Performance Optimization Of Microbial Fuel Cell (Mfc) Using Lactobacillus Bulgaricus, Rita Arbianti, Tania Surya Utami, Heri Hermansyah, Deni Novitasari, Ester Kristin, Ira Trisnawati

Makara Journal of Technology

Electrical energy needs in Indonesia are expected to continue to rise. The use of petroleum as a source of energy still dominates, although oil reserves in Indonesia are increasingly being depleted. Therefore, there is a need to develop alternative sources of sustainable energy, such as microbial fuel cell (MFC). In this study, Lactobacillus bulgaricus was used as an electricity producer in a dual-chamber MFC reactor. We investigated the maximum electrical energy by varying the bacterial optical density (OD), the operational time of MFC, the reactor volume, the electrolyte solution, and the configuration of MFC reactor. In this study, the maximum …

Measuring Acoustic Attenuation Of Polymer Materials Using Drop Ball Test, Yi Zhang

Doctoral Dissertations and Master's Theses

Polymers are often used for vibration damping and energy absorption. The effect of a material in reducing the strength of sound waves traveling through it is called acoustic attenuation. In the past, attenuation has mostly been evaluated in the MHz frequency range, using a pulse generator and transmitting transducer as the wave source. However, most real acoustic activities occur at frequencies up to a few hundred kHz. Here, a simple drop ball mechanism is used to generate acoustic source waves in the kHz range, and the attenuation capacities of several solid materials are measured. The recorded waveforms substantially differ between …

Understanding The Factors That Control Theformation And Morphology Of Zn5(Oh)8(No3)2⋅2h2othrough Hydrothermal Route, Xu Liu, Chunrui Wang, Xiaoyun Liu, Lizhi Ouyang, Ziyin You, Yeqing Lu, Xiaoshuang Chen

Mathematical Sciences Faculty Research

The influence of the choice of ethanol-water volume ratio, concentration of zinc salt, and ZnO buffer layer on the formation andmorphology of Zn5(OH)8(NO3)2⋅2H2O grown from the hydrothermal route was systematically discussed. Experimental resultssuggested that Zn5(OH)8(NO3)2⋅2H2O rectangle sheets and Zn5(OH)8(NO3)2⋅2H2O upright-standing plates were obtained bylimiting ethanol-water volume ratio. The concentration of zinc salt was crucial for getting phase-pure Zn5(OH)8(NO3)2⋅2H2O. Thepresence of ZnO buffer layer could lead to the that chemical composition of product grown on the substrate was totally differentfrom the product grown in the solution. Possible formation mechanism of Zn5(OH)8(NO3)2⋅2H2O was also studied. Ramanspectrum of Zn5(OH)8(NO3)2⋅2H2O displays a complex behavior …

Dielectric Properties Of Polymer–Particle Nanocomposites Influenced By Electronic Nature Of Filler Surfaces, Sasidhar Siddabattuni, Thomas P. Schuman, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The interface between the polymer and the particle has a critical role in altering the properties of a composite dielectric. Polymer-ceramic nanocomposites are promising dielectric materials for many electronic and power devices, combining the high dielectric constant of ceramic particles with the high dielectric breakdown strength of a polymer. Self-assembled monolayers of electron rich or electron poor organophosphate coupling groups were applied to affect the filler–polymer interface and investigate the role of this interface on composite behavior. The interface has potential to influence dielectric properties, in particular the leakage and breakdown resistance. The composite films synthesized from the modified filler …

An Examination Of The Potential Of Building Information Modelling To Increase The Efficiency Of Irish Contractors On Design And Build Projects, Charles Anthony Mitchell, Myles Keaveney

Conference papers

Competition between Irish contractors is more aggressive than ever before. In the current economic climate an ability to construct with greater efficiency could ensure a company’s survival. The purpose of this research was to determine the extent to which efficiency benefits could be realised by contractors on design and build projects as a result of implementing a revolutionary process referred to as Building Information Modelling (BIM). After a critical analysis on all aspects of BIM in the literature review, questionnaires were sent to establish the success of this system in the US and also in the comparatively few Irish firms …

Metamaterial Structure Design Optimization: A Study Of The Cylindrical Cloak, Jason V. Paul

Theses and Dissertations

Previously, Transformational Optics (TO) has been used as a foundation for designing cylindrical cloaks. The TO method uses a coordinate transform to dictate an anisotropic material parameter gradient in a cylinder coating that guides waves around the cylinder to reduce the Radar Cross Section (RCS). The problem is that the material parameters required for the TO cloak are not physically realizable and thus must be approximated. This problem is compounded by the fact that any approximation deviates from the ideal design and will allow fields to penetrate the cloak layer and interact with the object to be cloaked. Since the …

Quantum Man, Julian Voss-Andreae

The Transdisciplinary STEAM+ Journal

According to quantum physics, the world is fundamentally quite different than it seems. Drawing inspiration from the underlying nature of reality, former quantum physicist Julian Voss-Andreae created an image of a walking human as a quantum object. Made up of parallel sheets of steel, the sculpture is a metaphor for the counter-intuitive world of quantum physics. Symbolizing the dual nature of matter with the appearance of classical reality on the surface and cloudy quantum behavior underneath, the sculpture seems to consist of solid steel when seen from the front, but dissolves into almost nothing when seen from the side.

Migration Grid #26, Stanton Hunter

The Transdisciplinary STEAM+ Journal

This work is inspired by invisible sky grids formed by Ultra Violet (UV) light researchers discovered that guide Monarch butterflies on their migration from the mid-western United States to the Sierra Madre Mountains in Mexico. I use terrestrial material, clay, to make something celestial. Earth, associated with mass and permanence, is translated into these shifting, ephemeral, and ethereal sky-forms. The work encompasses void more than object and the complex shadows they cast are immaterial. Together, the objects and shadows point to what can’t be seen, at least by the human eye.

First Principles Study On Inp (001)-(2 × 4) Surface Oxidation, Santosh Kc, Weichao Wang, Hong Dong, Ka Xiong, Roberto Longo, Robert Wallace, Kyeongjae Cho

Faculty Publications

A theoretical study of the oxidation of InP(001)-(2 × 4) surface is performed using density functional theory methods. Our results on surface oxidation show that the oxygen adsorption does not produce any gap states in the bulk InP band gap, due to the saturation of surface In dangling bonds, whereas substitutional oxygen atoms produce gap states. This study also shows that the surface stability increases with the oxygen content, indicating a strong tendency for surface oxidation. Our results help to clarify the origin of surface gap states upon surface oxidation and provide an insight at the atomic level the mechanism …

Stress Corrosion Cracking Susceptibility Of Ultrafine Grained Al-Mg-Sc Alloy, G. R. Argade, N. Kumar, R. S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

General corrosion and stress corrosion cracking (SCC) behavior of coarse grained, fine grained and ultrafine grained (UFG) AA5083 and Al-Mg-Sc-Zr alloy in different thermomechanical conditions were studied in the present work. Friction stir processing (FSP) was carried out to refine the grain size. The average grain size achieved after FSP for AA5083 was 7±3μm, whereas that for Al-4Mg-0.8Sc-0.08Zr was 0.39±0.16μm with 100% UFG microstructure. Linear polarization resistance and cyclic polarization techniques were used to study general corrosion behavior of these alloys in 3.5wt% NaCl solution. The UFG microstructure showed the highest polarization resistance (Rp) of ~93kΩ which increased to ~160kΩ …

Study Of The Growth And Switching Kinetics On Ferroelectric Nanocrystals Of Copolymer Vinylidene Fluoride And Trifluoroethylene On An Atomic Force Microscope, R. V. Gaynutdinov, O. A. Lysova, A. L. Tolstikhina, V. M. Fridkin, S. G. Yudin, Stephen Ducharme

Stephen Ducharme Publications

The growth of nanocrystals obtained from Langmuir-Blodgett films of ferroelectric copolymer consisting of 70% vinylidene fluoride and 30% trifluoroethylene has been investigated by atomic force microscopy (AFM). The radius and concentration of nanocrystals are found to depend on the annealing time of the film. A model for nanocrystal growth is proposed which yields adequate time dependences for nanocrystal size parameters. The switching kinetics of individual ferroelectric nanocrystals with an average diameter of 100–200 nm and a height of 15–20 nm has been investigated in the piezoelectric response mode. It is shown that the switching of nanocrystals has an activation character.

Bacterial Growth On Metal And Non-Metal Surfaces In A Static Bioreactor, Rolan Yuk Loong Liong

Master's Theses

Research was conducted to observe bacterial growth on the surface of metals in a static bioreactor. Metal and non-metal samples were subjected to bacterial exposure (1 day and 9 days). The metal samples were surface treated prior to bacterial exposure. The microstructures of the surface treated samples were analyzed by optical microscopy. After exposure, the microstructures of the samples were analyzed by scanning electron microscopy (SEM). The analysis suggested that microbial attachment on the surface was related to the underlying microstructure of steel. The preferential attachment of microbes could potentially be influenced by cathodic and anodic regions created by the …

Dc, Rf, And Thermal Characterization Of High Electric Field Induced Degradation Mechanisms In Gan-On-Si High Electron Mobility Transistors, Matthew Anthony Bloom

Master's Theses

Gallium Nitride (GaN) high electron mobility transistors (HEMTs) are becoming increasingly popular in power amplifier systems as an alternative to bulkier vacuum tube technologies. GaN offers advantages over other III-V semiconductor heterostructures such as a large bandgap energy, a low dielectric constant, and a high critical breakdown field. The aforementioned qualities make GaN a prime candidate for high-power and radiation-hardened applications using a smaller form-factor. Several different types of semiconductor substrates have been considered for their thermal properties and cost-effectiveness, and Silicon (Si) has been of increasing interest due to a balance between both factors.

In this thesis, the DC, …

An In Situ Experimental Study Of Grain Growth In A Nanocrystalline Fe91ni8zr1 Alloy, Hasan Kotan, Kris A. Darling, Mostafa Saber, Ronald O. Scattergood, Carl C. Koch

Mechanical and Materials Engineering Faculty Publications and Presentations

Grain growth and microstructural evolution of thermally stabilized Fe91Ni8Zr1 were investigated by in situ and ex situ studies. Our investigations suggest that the microstructural evolution is fairly slow and the microstructure shows stabilization up to about 700 °C. Above this temperature, a certain fraction of grains grow abnormally into the nanocrystalline matrix, resulting in a bimodal microstructure and causing the complete loss of thermal stability. The reason for abnormal grain growth and the loss of thermal stability is identified as the appearance of the fcc γ-phase and consequent reduction in the total area of grain boundaries and the overall stored …

Study Of An Alternative Process For Oxidizing Vapor Grown Carbon Nanofibers Using Electron Beam Accelerators, Maria Cecília Evora, Donald A. Klosterman, Khalid Lafdi, Lingchuan Li, L.G.A. Silva

Chemical and Materials Engineering Faculty Publications

The use of a high-energy electron beam was explored in this study as an alternative technique for oxidizing vapor grown carbon nanofiber surfaces. The radiation exposures were carried out at three different electron beam facilities with beam energies of 1.5, 3.0 and 4.5 MeV and radiation doses ranging from 1000 to 3500 kGy. XPS analysis showed that oxygen was readily incorporated on the surface: the ratio O1s/C1s increased approximately by a factor of 4 when the carbon nanofibers were irradiated at 3500 kGy. The oxidized nanofibers exhibited better dispersion in a water/methanol solution (50% v/v) than as-received nanofibers. Raman spectroscopy …

High-Stress Shear-Induced Crystallization In Isotactic Polypropylene And Propylene/Ethylene Random Copolymers, Zhe Ma, Lucia Fernandez-Ballester, Dario Cavallo, Tim Gough, Gerrit W. M. Peters

Department of Mechanical and Materials Engineering: Faculty Publications

Crystallization of an isotactic polypropylene (iPP) homopolymer and two propylene/ethylene random copolymers (RACO), induced by high-stress shear, was studied using in situ synchrotron wide-angle X-ray diffraction (WAXD) at 137 °C. The “depth sectioning” method (Fernandez-Ballester, Journal of Rheology 53:5 (2009), pp. 1229−1254) was applied in order to isolate the contributions of different layers in the stress gradient direction and to relate specific structural evolution to the corresponding local stress. This approach gives quantitative results in terms of the specific length of fibrillar nuclei as a function of the applied stress. As expected, crystallization becomes faster with increasing stress—from the inner …

High Performance Membrane Electrode Assembly With Low Platinum Loadings Prepared By Atomic Layer Deposition For Pemfc Application, Ting Shu, Shi-Jun Liao, Chien-Te Hsieh, Ay Su

Journal of Electrochemistry

A high performance membrane electrode assembly (MEA) with low platinum loadings was successfully prepared with atomic layer deposition (ALD) technique. The anode of the MEA was prepared by depositing platinum on the carbon paper substrate, which was prepared by coating the slurry of carbon black (XC-72R) and Teflon, followed by drying and calcining at 350 °C. The MEAs consisted of the ALD anode or commercial catalyst anode, pretreated Nafion membrane (Nafion-117) and commercial cathode. Performances of MEAs were measured by single cell testing, and the anodes and MEAs were characterized by CV, SEM, TEM and XRD. The results revealed that …

Electrochemical Performance Of Fe3O4/C Composites As Negative Material For Lithium-Ion Batteries, Jun-Jie Cai, Shu Yao, Ze-Sheng Li, Hui Meng, Pei-Kang Shen

Journal of Electrochemistry

The Fe₃O₄/Carbon composites have been synthesized through coprecipitation pathway and by insitu aniline polymerization as a carbon source. Structural characterization and morphological study of the composites were investigated by using XRD, SEM and TEM techniques. The results showed that the nanosized Fe₃O₄ particles (40 ~ 80 nm) were encapsulated in the amorphous carbon. During the electrochemical tests, the Fe₃O₄/C composites exhibited high capaticity and excellent cycle ability, the retention of capaticity was about 1000 mAh·g^-1 after 30 cycles of charge/discharge tests at 50 mA·g^-1.

A Comparative Study Of Charge-Discharge Behaviors Of α-Pbo2 And β-Pbo2 Cathodes, Cong-Ying Cui, Xue-Mei Ma, De-Long Kong, Hou-Yi Ma

Journal of Electrochemistry

The α-PbO₂ and β-PbO₂ powders were prepared using simple chemical synthetic methods, and their crystalline structures and surface morphologies were characterized with X-ray powder diffraction spectroscopy and scanning electron microscopy. Using the as-synthesized α-PbO₂ and β-PbO₂ powders as positive active materials, the electrochemical performance of the two PbO₂ materials was investigated by means of cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy. The results indicate that the discharge capacity of α-PbO₂ electrode is larger than that of β-PbO₂; moreover, the composite electrodes made by α-PbO₂ and β-PbO₂ mixtures with …