Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2006

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 31 - 60 of 280

Full-Text Articles in Materials Science and Engineering

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li Nov 2006

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li

Journal of Electrochemistry

Cathode materials LiNi1/3Co1/3Mn1/3O2 were prepared by low-heating solid-state reaction.The micro-structure and morphology of as-synthesized materials have been investigated by using XRD and SEM. The compatibilities of LiNi1/3Co1/3Mn1/3O2 with purchased LiPF6/ EC+DMC+DEC electrolyte and prepared LiBOB/EC+DEC+EMC electrolyte have also been studied. The Li/LiNi1/3Co1/3Mn1/3O2 batteries showed excellent electrochemical properties in the LiPF6/EC+DMC+DEC electrolyte. Reversible discharge capacities of 167, 163, 163, 157, 147mAh/g at 0.5C, 1C, 1.5C, 2C, 3C rate between 2.7~4.35 V, with stable cycling performances have …

Go to article

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen Nov 2006

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen

Journal of Electrochemistry

Electrochemical behavior of Bup has been investigated by means of cyclic voltammetry,linear sweep voltammetry,differential pulse voltammetry and square wave voltammetry.The results indicate that the electrochemical behavior of Bup on the surface of glassy carbon electrode is corresponding to a irreversible two-protons and two-electrons process with absrption.The square wave voltammetry for determination of Bup in actual samples has been established.

Go to article

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai Nov 2006

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai

Journal of Electrochemistry

A new electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate,gadolinium hexacyanoferrate(GdCHF),was prepared by electrochemically deposition on the surface of a glassy carbon electrode with a potential cycling procedure.The result of SEM indicated that the GdHCF was in the form of particles adhered on the surface of electrode.There were two different shapes and sizes of GdHCF forming on the surface of electrode.FTIR spectrum of GdHCF showed a very strong and sharp peak,which located at 2062.5 cm-1 and corresponded to the stretching vibration of the C≡N group in the GdHCF.The cyclic voltammetric results indicated that the GdHCF/GC electrode exhibited two …

Go to article

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang Nov 2006

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang

Journal of Electrochemistry

Monolithic carbon/nickel oxide composite materials were synthesized by carbonization of phenol formaldehyde gels that were ion-exchanged with Ni2+.Atomic absorption spectroscopy and powder X-ray diffraction technique were used to characterize the chemical composition and physical structure of the materials.The nickel dope amount for this method can reach 5.9 %(by mass).Subsequent cyclic voltammetry experiments indicate that the materials exhibit best capacitive performance at the nickel content of 4.4 %.

Go to article

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou Nov 2006

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou

Journal of Electrochemistry

A rapid process is described to produce single or multiple electrodes of any shape based on CO2 laser ablation for microfluidic chip.The method is as follow: coating a kind of material as sacrifice layer on a piece of glass with sputtered Cr and Au;designing the needed pattern on a computer;selecting proper parameters and ablating with CO2 laser;wiping of Au/Cr and sacrifice layer,and obtain electrodes at last.The microfluidic chip was gotten by reversely bonding with a piece of PDMS,and sealing around with PDMS prepolymer.The mask' effect is the main factor that influencing electrode quality.The width of electrodes could be …

Go to article

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma Nov 2006

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma

Journal of Electrochemistry

Gold nanocrystals with controllable size were synthesized through a simple electroreduction method using poly(N-vinylpyrrolidone)(PVP) of different polymerization degree as both stabilizer and shape-controller for gold nanoclusters.Individual gold nanoparticles spontaneously assembled into the wire-and ring-shaped nanoparticle aggregates depending on the PVP's dynamic stretching and curling,and precursor nanoparticles grew into flat,single-crystalline nanoprisms with thickness of dozens of nanometers based on the oriented aggregation between particles.Besides,core-shell Au/Ag nanoparticles were conveniently synthesized through two-step electroreduction of noble metal ions in the presence of PVPK30.The electrochemical synthetic method based on PVP provides a new path for preparation of noble metal nanostructured materials with different shape …

Go to article

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen Nov 2006

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen

Journal of Electrochemistry

Oxide and Pd on carbon composite catalysts have been prepared by intermittent microwave heating(IMH) method.The performance of the catalysts for glycerol oxidation in alkaline solution is studied by electrochemical techniques.It is shown that the Pd/C catalyst is active for glycerol electrooxidation.However,the oxide-Pd/C catalysts are even better in terms of the onset potential that is more negative and peak current density.The ratio of oxide to Pd is optimized according to the electrochemical measurement.The results reveal that the addition of oxide into the Pd/C induces the synergistic effect for glycerol electrooxidation.

Go to article

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia Nov 2006

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia

Journal of Electrochemistry

Treatment of pulping wastewater by using a novel electrochemical reactor,i.e.the three phase fluidized bed electrode,reactor were invesigated.The effects of air flow rate,applied voltage,pH value and FeSO4 concentration on electrolysis efficiency were investigated.It was clearly shown that the 20 V of voltage,0.3 m3·h-1 of air flow rate,1000 mg L-1 of FeSO4 concentration and pH≈2.5 were its best conditions.COD removal could be 70.1% under these conditions.

Go to article

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma Nov 2006

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma

Journal of Electrochemistry

Powder micro-electrodes were prepared from raw carbon nanotubes and carbon nanotubes modified by carboxyl.The electro-reduction properties of both the raw and open-ended carbon nanotubes in p-Nitrophenol solution were investigated.The FTIR spectrum result indicated that the functional groups are successfully fixed on the surface of the carbon nanotubes after nitric acid treatment.The cyclic voltammetry results show that the electrochemical activity of carboxyl-modified carbon nanotubes was improved.The mechanism of electro-(reduction) for the carbon nanotubes after acid treatment was discussed.

Go to article

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen Nov 2006

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen

Journal of Electrochemistry

The rate-determining step of V(Ⅳ) /V(Ⅴ) redoxreaction was investigated at graphite felt(GF)composite electrode by various techniques: cyclic voltammetry,polarization curve and impedance spectroscopy.Cyclic voltammetry analysis indicated that V(Ⅳ) /V(Ⅴ) redox reaction at GF electrode is quasi reversible.Acertain chemical reaction step is suspected to follow the electron transfer step of this reaction.The Tafel slopevalue(0.124) obtained from the polarization curve agrees well with theoretical value(0.12),which supposingthe electron transfer step was the rate-determining step.Impedance Spectroscopies at various potentials werestudied and simulated by equivalentcircuits.The impedance value of the electron transfer step modified is greatlyhigher than the others,which shows that the electron transfer step is the …

Go to article

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou Nov 2006

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou

Journal of Electrochemistry

The lithium iron phosphate cathode materials were synthesized by solid-state reaction combined high-rate ball milling under the temperature ranging from 400 ℃ to 700 ℃.The crystalline structure, morphology of particles, and electrochemical performance of the sample were investigated by X-ray diffraction, scanning electron microscopy and charge-discharge test. The results showed that the sintering temperature had great influences on the crystal structure, morphology and electrochemical performances of LiFePO4. The sample synthesized under 600℃ showed the best charge-discharge performances with the first specific discharge capacity of(128.8) mAh/g and the 15th specific discharge capacity of 129.1 mAh/g at 0.1C rate, …

Go to article

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai Nov 2006

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai

Journal of Electrochemistry

The cathode material of olivine LiFePO4 was prepared by a novel method of polyacrylate-pyrolysis-reduction.XRD demonstrates that the material have the olivine structure.SEM photo shows an average particle-size of about 100 nm with a well distribution.Electrochemical test of cycling at a constant current reveals the discharge capacity of 138 mAh/g and a good cycling stability.It is a novel practicable technology to prepare LiFePO4 by using polyacrylate-pyrolysis-reduction method.

Go to article

Biogasoline Production From Palm Oil Via Catalytic Hydrocracking Over Gamma-Alumina Catalyst, Anondho Wijanarko, Dadi Ahmad Mawardi, Mohammad Nasikin Nov 2006

Biogasoline Production From Palm Oil Via Catalytic Hydrocracking Over Gamma-Alumina Catalyst, Anondho Wijanarko, Dadi Ahmad Mawardi, Mohammad Nasikin

Makara Journal of Technology

Biogasoline Production from Palm Oil Via Catalytic Hydrocracking over Gamma-Alumina Catalyst. Bio gasoline conversion from palm oil is an alternative energy resources method which can be substituted fossil fuel base energy utilization. Previous research resulted that palm oil can be converted into hydrocarbon by catalytic cracking reaction with γ-alumina catalyst. In this research, catalytic cracking reaction of palm oil by γ-alumina catalyst is done in a stirrer batch reactor with the oil/catalyst weight ratio variation of 100:1, 75:1, and 50:1; at suhue variation of 260 to 340oC and reaction time variation of 1 to 2 hour. Post cracking reaction, bio …

Go to article

Segmental Sinusoidal Model For Speech Signal Coding, Florentinus Budi Setiawan, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro Nov 2006

Segmental Sinusoidal Model For Speech Signal Coding, Florentinus Budi Setiawan, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Segmental Sinusoidal Model for Speech Signal Coding. Periodic signal can be decomposed by sinusoidal component with Fourier series. With this characteristic, it can be modeled referring by sinusoidal form. By the sinusoidal model, signal can be quantized in order to encode the speech signal at the lower rate. The recent sinusoidal method is implemented in speech coding. By using this method, a block of the speech signal with 20 ms to 30 ms width is coded based on Fourier series coefficients. The new method proposed is quantization and reconstruction of speech signal by the segmental sinusoidal model. A segment is …

Go to article

A Study On Parallel Computation Tools On Networked Pcs, Heru Suhartanto Nov 2006

A Study On Parallel Computation Tools On Networked Pcs, Heru Suhartanto

Makara Journal of Technology

A Study on Parallel Computation Tools on Networked PCs. Many models for natural phenomena, engineering applications and industries need powerfull computing resources to solve their problems. High Performance Computing resources were introduced by many researchers. This comes in the form of Supercomputers and with operating systems and tools for development such as parallel compiler and its library. However, these resources are expensive for the investation and maintenance, hence people need some alternatives. Many people then introduced parallel distributed computing by using available computing resource such as PCs. Each of these PCs is treated as a processors, hence the cluster of …

Go to article

Crude Oil Sludge Degradation In Microcosmic Scale: Simple Simulation As Preliminary Study On Land Treatment Bioremediation., Astri Nugroho Nov 2006

Crude Oil Sludge Degradation In Microcosmic Scale: Simple Simulation As Preliminary Study On Land Treatment Bioremediation., Astri Nugroho

Makara Journal of Technology

Crude Oil Sludge Degradation in Microcosmic Scale: Simple Simulation as Preliminary Study on Land Treatment Bioremediation. A study in microcosmic condition has been carried out to evaluate the bacterial hydrocarbonoclastic capability in increasing the oil sludge degradation being mixed with NPK fertilizer as nitrogen resources. Aerobic test was carried out by putting erlenmeyers in a shaker incubator, 120 rpm shaking speed, at 50°C temperature. While 150 days in microcosmic one observation showed that the consortium has the potential to grow up to 50% (v/v) sludge oil load. Maximum growth and maximum growth rate of the consortium occurred in the III …

Go to article

Determination Of Operation Condition And Product Dimension Accuracy Optimization Of Filament Deposition Modelling On Layer Manufacturing Application, Slamet A. Widyanto, Alva Edy Tontowi, Jamasri Jamasri, Heru Santoso Budi Rochardjo Nov 2006

Determination Of Operation Condition And Product Dimension Accuracy Optimization Of Filament Deposition Modelling On Layer Manufacturing Application, Slamet A. Widyanto, Alva Edy Tontowi, Jamasri Jamasri, Heru Santoso Budi Rochardjo

Makara Journal of Technology

Layer manufacturing process has proven as a process that can produce a high complexity mechanical part. Now, Improvement of LM methods continuously conduct that is aimed to increase precessions and efficiency of these processes. Pressure filament deposition modelling is a form of layer manufacturing process that is designed to produce a plastic part with controlling its semisolid phase. In this research, the equipment of filament depositor is designed and tested to make the product filament deposition. With operation condition observation, the optimal temperature and pressure of deposition process was determined. These experiments used PVC as crystalline material and polypropylene as …

Go to article

Magnetic Field Effects On Caco3 Precipitation Process In Hard Water, Nelson Saksono, Setijo Bismo, Elsa Krisanti, Azwar Manaf, Roekmijati Widaningrum Nov 2006

Magnetic Field Effects On Caco3 Precipitation Process In Hard Water, Nelson Saksono, Setijo Bismo, Elsa Krisanti, Azwar Manaf, Roekmijati Widaningrum

Makara Journal of Technology

Magnetic Field Effects on CaCO3 Precipitation Process in Hard Water. Magnetic treatment is applied as physical water treatment for scale prevention especially CaCO3, from hard water in piping equipment by reducing its hardness. Na2CO3 and CaCl2 solution sample was used in to investigate the magnetic fields influence on the formation of particle of CaCO3. By changing the strength of magnetic fields, exposure time and concentration of samples solution, this study presents quantitative results of total scale deposit, total precipitated CaCO3 and morphology of the deposit. This research was run by comparing magnetically and non-magnetically treated samples. The results showed an …

Go to article

Stress Corrosion Cracking Behavior Of Stainless Steel 304 In The Sulfuric Acid Environment Due To Prestrain, Mohammad Badaruddin, Ahmad Suudi, Arinal Hamni Nov 2006

Stress Corrosion Cracking Behavior Of Stainless Steel 304 In The Sulfuric Acid Environment Due To Prestrain, Mohammad Badaruddin, Ahmad Suudi, Arinal Hamni

Makara Journal of Technology

Stress Corrosion Cracking Behavior of Stainless Steel 304 in the Sulfuric Acid Environment Due to Prestrain. The aim of research is to investigate the effect of prestrain on the stress corossion cracking behavior of AISI 304 stainless steel in the sulfuric acid of 10% concentration under the static cantilever loading according to ASTM E-1681 standart. The specimen of 304 Stainless steel was strain up over the yield strength until reaching the uniform strain of 5% and 10% using servopulser UTM 9506 under the displacement control of 0,3 mm/sec. The results of test show that the prestrain of 5% specimen is …

Go to article

Humidification Factors From Laboratory Studies Of Fresh Smoke From Biomass Fuels, D. E. Day, J. L. Hand, C. M. Carrico, Guenter Engling, W. C. Malm Nov 2006

Humidification Factors From Laboratory Studies Of Fresh Smoke From Biomass Fuels, D. E. Day, J. L. Hand, C. M. Carrico, Guenter Engling, W. C. Malm

Materials Science and Engineering Faculty Research & Creative Works

Measurements of smoke aerosol humidification factors were performed in a laboratory for different biomass fuel types and burn conditions. Two nephelometers simultaneously measured dry and humidified light scattering coefficients (bsp(dry) and bsp(RH), respectively), providing the first observations of the temporal evolution of the humidification factor (f(RH) = bsp(RH)/bsp(dry)) for fresh (minutes-old) smoke. Hygroscopic characteristics of the smoke aerosols varied with fuel type and fire conditions, with the mean f(RH) ranging from 1.01 to 1.95 for fresh minutes-old smoke for the relative humidity (RH) range of 70-94%. These f(RH) values exhibited temporal variability, with some fuels alternating from hygroscopic to nonhygroscopic …

Go to article

Microstructural Modification Of As-Cast Al-Si-Mg Alloy By Friction Stir Processing, Z. Y. Ma, S. R. Sharma, Rajiv S. Mishra Nov 2006

Microstructural Modification Of As-Cast Al-Si-Mg Alloy By Friction Stir Processing, Z. Y. Ma, S. R. Sharma, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

Friction stir processing (FSP) has been applied to cast aluminum alloy A356 plates to enhance the mechanical properties through microstructural refinement and homogenization. the effect of tool geometry and FSP parameters on resultant microstructure and mechanical properties was investigated. the FSP broke up and dispersed the coarse acicular Si particles creating a uniform distribution of Si particles in the aluminum matrix with significant microstructural refinement. Further, FSP healed the casting porosity. These microstructural changes led to a significant improvement in both strength and ductility. Higher tool rotation rate was the most effective parameter to refine coarse Si particles, heal the …

Go to article

Hydrologic Properties Of Pervious Concrete, Joe D. Luck, Stephen R. Workman, Stephen F. Higgins, Mark S. Coyne Nov 2006

Hydrologic Properties Of Pervious Concrete, Joe D. Luck, Stephen R. Workman, Stephen F. Higgins, Mark S. Coyne

Plant and Soil Sciences Faculty Publications

Pervious concrete is concrete made by eliminating most or all of the fine aggregate (sand) in the concrete mix, which allows interconnected void spaces to be formed in the hardened product. These interconnected void spaces allow the concrete to transmit water at relatively high rates. The main objective of this project was to conduct research on the potential application of pervious concrete in agricultural settings, specifically for use in animal feed lots, manure storage pads, animal manure and bedding compost facilities, or floor systems in animal buildings. Laboratory tests were conducted on replicated samples of pervious concrete formed from two …

Go to article

Capillary-Driven Flows Along Rounded Interior Corners, Yongkang Chen, Mark M. Weislogel, Cory L. Nardin Nov 2006

Capillary-Driven Flows Along Rounded Interior Corners, Yongkang Chen, Mark M. Weislogel, Cory L. Nardin

Mechanical and Materials Engineering Faculty Publications and Presentations

The problem of low-gravity isothermal capillary flow along interior corners that are rounded is revisited analytically in this work. By careful selection of geometric length scales and through the introduction of a new geometric scaling parameter Tc, the Navier–Stokes equation is reduced to a convenient∼O(1) form for both analytic and numeric solutions for all values of corner half-angle α and corner roundedness ratio λ for perfectly wetting fluids. The scaling and analysis of the problem captures much of the intricate geometric dependence of the viscous resistance and significantly reduces the reliance on numerical data compared with several previous solution methods …

Go to article

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2006 Through September 30, 2006, Anthony Hechanova Oct 2006

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2006 Through September 30, 2006, Anthony Hechanova

Publications (NSTD)

Hydrodynamics and thermal numerical modeling coupled with sulfur trioxide decomposition for the one channel geometry with three different channel configurations were performed. The results obtained from the numerical modeling were compared with the baseline design under the same boundary and operation conditions. The case with diamond shaped channels has the highest percentage of sulfuric acid decomposition. The baseline channel geometry has the lowest pressure drop compared with other cases.

Go to article

Work In Progress: Crossing The Engineering Border Into Art And Society With A Materials Selection For The Life Cycle Course, Katherine C. Chen, Blair London Oct 2006

Work In Progress: Crossing The Engineering Border Into Art And Society With A Materials Selection For The Life Cycle Course, Katherine C. Chen, Blair London

Materials Engineering

A new course in materials engineering has been developed to incorporate industrial design and sustainability principles. Many current engineering tasks require the ability to comprehend and consider the complicated interplay of technology with the environment and society. Thus the changing skill set required of future engineers is being reflected in the changes with our courses. We are stepping beyond the traditional boundaries of engineering courses to present a more holistic approach to problem solving. The use of materials and processing techniques is applied to product design, and thus involves consideration of the end user and the end of product life. …

Go to article

Work In Progress: The Five Basic “Positions” Of Engineering, Blair London, Lisa Deyo Oct 2006

Work In Progress: The Five Basic “Positions” Of Engineering, Blair London, Lisa Deyo

Materials Engineering

Classical ballet technique relies on mastery of the five basic positions of the feet. Every movement in classical ballet goes through one or more of these positions. The positions are practiced in class, used in choreography, and become second nature in performance on stage. Engineering may have a similar context. These engineering “positions” are not just the foundational coursework leading up to an engineering degree such as mathematics, chemistry, or physics. Rather, the positions are aspects of engineering that a practicing engineer routinely does to successfully perform as engineers. The engineering positions discussed are: question, analyze, team, write, and speak. …

Go to article

Composite (La, Sr)Mno3-Ysz Cathode For Sofc, Toshio Suzuki, Masanobu Awano, Piotr Jasinski, Vladimir Petrovsky, Harlan U. Anderson Oct 2006

Composite (La, Sr)Mno3-Ysz Cathode For Sofc, Toshio Suzuki, Masanobu Awano, Piotr Jasinski, Vladimir Petrovsky, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

(La, Sr) MnO3 (LSM)-Y doped ZrO2 (YSZ) composite was prepared using YSZ colloidal suspension (initial YSZ particle size ∼100 nm), YSZ and LSM polymer precursors on dense substrates at 800 °C annealing temperature. the results of a symmetrical LSM-YSZ composite cell test showed the area specific resistance for overpotential of 0.14 Ω cm2 at 800 °C, which indicated that the LSM-YSZ composite could be a potential candidate for cathode in SOFCs. the performance of the cell with the LSM-YSZ composite cathode and Ni-YSZ anode was investigated and the power density of about 0.26 W cm- 2 was obtained …

Go to article

Effect Of Friction Stir Processing On The Microstructure Of Cast A356 Aluminum, Z. Y. Ma, S. R. Sharma, Rajiv S. Mishra Oct 2006

Effect Of Friction Stir Processing On The Microstructure Of Cast A356 Aluminum, Z. Y. Ma, S. R. Sharma, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

Friction stir processing (FSP) was applied to cast A356 Al to modify the as-cast microstructure. FSP homogenizes and refines the cast microstructure, completely eliminates porosity, and creates a microstructure with fine Si particles (0.25-0.42 μm) distributed in a fine grain aluminum matrix (3-4 μm). Further, FSP parameters significantly influence microstructural development in the processed zone of cast A356 Al. Generally, higher tool rotation rate creates a more homogeneous microstructure. at lower tool rotation rates, a macroscopically visible banded structure characterized by a low density of coarse particles, was detected in the nugget zone. However, FSP parameters did not significantly influence …

Go to article

Photonic Band Tuning In 2d Photonic Crystals By Atomic Layer Deposition, Elton Graugnard, Davy P. Gaillot, Simon N. Dunham, Curtis W. Neff, Tsuyoshi Yamashita, Christopher J. Summers Oct 2006

Photonic Band Tuning In 2d Photonic Crystals By Atomic Layer Deposition, Elton Graugnard, Davy P. Gaillot, Simon N. Dunham, Curtis W. Neff, Tsuyoshi Yamashita, Christopher J. Summers

Materials Science and Engineering Faculty Publications and Presentations

Atomic layer deposition (ALD) has become a powerful tool for the fabrication of high quality 3-dimentional photonic crystals (PCs) from both inorganic (opal) and organic (holographically patterned polymer) templates [1,2]. With ALD, highly conformal films can be grown with a precision of 0.05 nm, which, when combined with the availability of a wide range of low temperature film growth protocols, enables a high degree of control over material and structural properties to precisely tune optical properties [3]. Two-dimensional photonic crystals have been developed extensively for applications in optical interconnects, beam steering, and sensor devices; and are predominantly fabricated by electron-beam …

Go to article

Load Characteristics For An Aluminum Alloy Friction Stir Weld, Lewis T. Henderson Oct 2006

Load Characteristics For An Aluminum Alloy Friction Stir Weld, Lewis T. Henderson

Mechanical & Aerospace Engineering Theses & Dissertations

A process was developed to modify a vintage 1960's milling machine to allow axial load measurements to be taken and to allow automated control of the plunging stage during the friction stir welding process. The installation of a load cell in the housing of the mill machine was accomplished by way of modifying internal machine parts and introducing new external hardware. Successful post removal inspections and operational checks show that the conversion of a vintage 1960's milling machine to allow axial load measurements is feasible. The automation of the plunge process during friction stir welding was proven feasible by the …

Go to article

First Prev Next Last