Materials Science and Engineering Commons^™

Shape-Shifting Surfaces For Rapid Release And Direct Stamping Of Organized Micro-Tissues, Samuel James Dupont

USF Tampa Graduate Theses and Dissertations

The primary aim of the research in this study is to develop a robust and simple platform for the in vitro organization of cells on surfaces which facilitate rapid cell release and allows for the direct stamping of highly organized micro-tissues. Current approaches towards this goal have been very successful but are lengthy and subject cells to harsh conditions for extended periods of time raising questions regarding cell health and maintenance of physiological state. To address these concerns a platform was developed to allow for rapid cell release by utilizing a release mechanism different from previous work.

Micron-scale structures comprised …

Growth And Characterization Of Functional Nanoparticulate Films By A Microwave Plasma-Assisted Spray Deposition Process, Ted Wangensteen

USF Tampa Graduate Theses and Dissertations

Nanoparticle and nanoparticulate films have been grown by a unique approach combining a microwave and nebulized droplets where the concentration and thus the resulting particle size can be controlled. The goal of such a scalable approach was to achieve it with the least number of steps, and without using expensive high purity chemicals or the precautions necessary to work with such chemicals. This approach was developed as a result of first using a laser unsuccessfully to achieve the desired films and particles. Some problems with the laser approach for growing desired films were solved by substituting the higher energy microwave …

Encapsulation Of High Temperature Phase Change Materials For Thermal Energy Storage, Rupa Nath

USF Tampa Graduate Theses and Dissertations

Thermal energy storage is a major contributor to bridge the gap between energy demand (consumption) and energy production (supply) by concentrating solar power. The utilization of high latent heat storage capability of phase change materials is one of the keys to an efficient way to store thermal energy. However, some of the limitations of the existing technology are the high volumetric expansion and low thermal conductivity of phase change materials (PCMs), low energy density, low operation temperatures and high cost. The present work deals with encapsulated PCM system, which operates at temperatures above 500°C and takes advantage of the heat …

Stress-Strain Management Of Heteroepitaxial Polycrystalline Silicon Carbide Films, Christopher William Locke

USF Tampa Graduate Theses and Dissertations

Silicon carbide (SiC) is one of the hardest known materials and is also, by good fortune, a wide bandgap semiconductor. While the application of SiC for high-temperature and high-power electronics is fairly well known, its utility as a highly robust, chemically-inert material for microelectrical mechanical systems (MEMS) is only beginning to be well recognized. SiC can be grown on both native SiC substrates or on Si using heteroepitaxial growth methods which affords the possibility to use Si micromachining methods to fabricate advanced SiC MEMS devices.

The control of film stress in heteroepitaxial silicon carbide films grown on polysilicon-on-oxide substrates has …

Stress Corrosion Cracking Evaluation Of Candidate High Strength Stainless Steels For Prestressed Concrete, Joseph Rogelio Fernandez

USF Tampa Graduate Theses and Dissertations

Prestressed concrete piles are commonly used to support over-water highway bridges in marine environments. The reinforcing steel within will ultimately be degraded via corrosion damage due to the penetration of chloride ions from sea water. The service life of these structures is, in part, dictated by the time required to diffuse chloride ions through the concrete cover and subsequently corrode the steel. Therefore, by slowing the rate of diffusion or increasing the chloride threshold of the steel (or both) an increased service life can be expected. This thesis focuses on the latter whereby stainless steel reinforcing alternatives were investigated to …

Growth And Characterization Of Thermoelectric Ba8Ga16Ge30 Type-I Clathrate Thin-Films Deposited By Pulsed Dual-Laser Ablation, Robert Harry Hyde

USF Tampa Graduate Theses and Dissertations

The on-going interest in thermoelectric (TE) materials, in the form of bulk and films, motivates investigation of materials that exhibit low thermal conductivity and good electrical conductivity. Such materials are phonon-glass electron-crystals (PGEC), and the multi-component type-I clathrate Ba₈Ga₁₆Ge₃₀ is in this category. This work reports the first investigation of Ba₈Ga₁₆Ge₃₀ films grown by pulsed laser deposition (PLD).

This dissertation details the in-situ growth of polycrystalline type-I clathrate Ba₈Ga₁₆Ge₃₀ thin-films by pulsed laser ablation. Films deposited using conventional laser ablation produced films that contained a …

Oxygen Diffusion Characterization Of Frp Composites Used In Concrete Repair And Rehabilitation, Chandra K. Khoe

USF Tampa Graduate Theses and Dissertations

Many independent studies have conclusively demonstrated that fiber reinforced polymers (FRP) slow down chloride-induced corrosion of steel in concrete. The mechanism for this slow down is not well understood but it has been hypothesized that FRP serves as a barrier to the ingress of chloride, moisture, and oxygen that sustain electrochemical corrosion of steel.

This dissertation presents results from an experimental study that determined the oxygen permeation rates of materials used in infrastructure repair. In the study, the oxygen permeation constants for epoxy, carbon and glass fiber laminates, concrete, epoxy-concrete and FRP-concrete systems were determined and a method developed to …

Novel Magnetic Materials For Sensing And Cooling Applications, Anurag Chaturvedi

USF Tampa Graduate Theses and Dissertations

The overall goals of the present PhD research are to explore the giant magnetoimpedance (GMI) and giant magnetocaloric (GMC) effects in functional magnetic materials and provide guidance on the optimization of the material properties for use in advanced magnetic sensor and refrigeration applications.

GMI has attracted growing interest due to its promising applications in high-performance magnetic sensors. Research in this field is focused on the development of new materials with properties appropriate for practical GMI sensor applications. In this project, we have successfully set up a new magneto-impedance measurement system in the Functional Materials Laboratory at USF. We have established, …

Fabrication And Characterization Of Electrospun Cactus Mucilage Nanofibers, Yanay Pais

USF Tampa Graduate Theses and Dissertations

This work seeks to fabricate, optimize, and characterize nanofibers of cactus Opuntia ficus-indica mucilage and Poly (vinyl alcohol) (PVA) by electrospinning. Mucilage is a neutral mixture of sugars produced by cactus and PVA is a non-toxic, water-soluble, synthetic polymer, which is widely used as a co-spinning agent for polymers. Mucilage was extracted from the cactus pad and prepared for electrospinning by mixing with acetic acid. Two types of PVA were used differentiating in high and low molecular weights. Concentrations of PVA were varied to find an adequate threshold for fiber formation. Changing the ratio of PVA to cactus mucilage produced …

Polydimethylsiloxane Mechanical Properties Measured By Macroscopic Compression And Nanoindentation Techniques, Zhixin Wang

USF Tampa Graduate Theses and Dissertations

In this thesis, the relationship between the elastic modulus of PDMS and the base/agent ratio (the amount of crosslinking) is studied. Reliable macroscopic compression test instrument was developed. Preload method was applied for the nanoindentation flat punch test to develop full contact.

In chapter 2, an easy instrument setup for macroscopic compression test is described. A series of PDMS samples with different base/agent ratios were tested using the macroscopic compression method. The relationship between PDMS elastic modulus and its base/agent ratio was established.

In chapter 3, PDMS nanoindentation DMA tests provide stable data with different test control models. The storage …

Interface Engineered Diamond Coatings For Dry Machining Applications, Humberto Arturo Gomez Vega

USF Tampa Graduate Theses and Dissertations

Several studies have been propose to improve the adhesion of diamond films on cemented carbide tool materials, however a systematic study in identifying the role of the factors that affect the final diamond adhesion and the resulting machining performance of the tool under real manufacturing conditions is still unexplored. CVD diamond film's extraordinary qualities bring little benefit if the film fails to adhere sufficiently to the substrate. Inadequate adhesion undermines tool performance and longevity, causing unpredictable behavior under load and possibly leading to unexpected failure of the tool in the production line. This dissertation investigates the effects of different surface …

Diamond Based-Materials: Synthesis, Characterization And Applications, Qiang Hu

USF Tampa Graduate Theses and Dissertations

The studies covered in this dissertation concentrate on the various forms of diamond films synthesized by chemical vapor deposition (CVD) method, including microwave CVD and hot filament CVD. According to crystallinity and grain size, a variety of diamond forms primarily including microcrystalline (most commonly referred to as polycrystalline) and nanocrystalline diamond films, diamond-like carbon (DLC) films were successfully synthesized. The as-grown diamond films were optimized by changing deposition pressure, volume of reactant gas hydrogen (H2) and carrier gas argon (Ar) in order to get high-quality diamond films with a smooth surface, low roughness, preferred growth orientation and high sp3 bond …