Materials Science and Engineering Commons^™

Tribological Characterization Of Ti-Based Alloys For Biomedical Applications In Simulated Body Fluid, Edgar Reyes

Open Access Theses & Dissertations

Tribology is a terminology introduced in the 1960's and it is a study that relates to the investigation of the damage of materials. Titanium, as a material used for a wide range of application, it has been brought to the attention of researchers some characteristics such as its much lower density if compared to steel, its capability as an alloying agent with an amount of metals to enhance physical and mechanical properties, to name just a few characteristics. This paper will discuss the performance on tribology behavior in two different Titanium alloys. These Titanium alloys are Ti-6Al-4V (Ti64), and Ti-24Nb-4Zr-8Sn …

Development And Characterization Of Novel Materials For The Advancement Of Additive Manufacturing By Material Extrusion 3d Printing, Jose Gilberto Siqueiros

Open Access Theses & Dissertations

The development of additive manufacturing technologies has been under the spotlight from the past decade due to its enormous potential to disrupt current manufacturing processes. Material extrusion 3D printing (ME3DP) is the most common type of additive manufacturing technology as it experienced an exponential growth after the expiration of the fused deposition modeling patent filed in 1989 by Scott Crump. The large interest behind this technology is generated from the capacity to create complex shapes, rapid prototyping, relatively ease of use, low cost, and high accessibility. The gradual evolution of material extrusion 3D printing calls to become a technology ordinarily …

Tungsten Doping Induced Superior Mechanical Properties Of Hafnium Oxide For Energy Applications, Ann Marie Uribe

Open Access Theses & Dissertations

Hafnium oxide, or hafnia, is a high temperature refractory material with good electrical, chemical, optical, and thermodynamic properties. The effects of dopants have been widely studied, especially after the discovery of ferroelectricity induced in hafnia thin films. While attractive and used in the opto-electronic, memory devices, and semiconductor industries, there is a lack in the literature on enhancing the mechanical properties of hafnium oxide, specifically through doping it with tungsten, another material of interest particularly for future high temperature device applications. Thus, this work aimed to grow hafnia thin films doped with varying amounts of tungsten. The samples were grown …

Heterogeneous Integration Of Metallic, Semiconducting And Dielectric Two-Dimensional Layered Material Inks For Electronics And Sensing Device Platforms, Jay Amrish Desai

Open Access Theses & Dissertations

In monolayers of two-dimensional (2-D) layered materials, the motion of electrons is confined to a 2-D plane yielding a "zero" effective thickness with regard to the electrons. These monolayers are commonly obtained by exfoliating membranes from the bulk crystal to overcome the weak interplanar Van der Waals bonding using the so-called top-down approach. The bottom-up approach is another avenue to realize these materials, where atoms and molecules coalesce together into increasingly larger assemblies for the realization of the bulk three-dimensional (3-D) crystal. The unique properties of many of these 2-D materials make them highly sought out candidates for advancing conventional …

A New Approach To Multiplanar, Real-Time Simulation Of Physiological Knee Loads And Synthetic Knee Components Augmented By Local Composition Control In Fused Filament Fabrication, Joshua Taylor Green

Open Access Theses & Dissertations

Despite numerous advances in biomedical engineering, few developments in surgical simulation have been made outside of computational models. Cadavers remain the primary media on which surgical research and simulation is conducted. Most attempts to quantify the effects of orthopedic surgical methods fail to achieve statistical significance due to limited quantities of cadaver specimen, large variations among the cadaver population, and a lack of repeatability among measurement techniques. The general purpose of the research covered in this dissertation is to develop repeatable simulation of physiological loads and develop techniques to fabricate a synthetic-based replacement of cadaver specimens. Future work applying this …

Structural And Optical Investigations Of Rbxcs1-Xh2po4, Alex D. Price

Open Access Theses & Dissertations

Proton conductor solid acid electrolytes RbxCs1-xH2PO4 (0≤x≤1) have been investigated using second harmonic generation and powder x-ray diffraction. Second harmonic generation is an optical technique which can be used to study the structural properties of materials. Microscopes of this nature have the ability to image objects with a variable penetration depth in a non-destructive manner, allowing for great potential to be used for in situ observations of the electrolyte’s structure when in a fuel cell under operating conditions.

X-ray powder diffraction was carried out on the series of samples and found for values of 0≤x≤0.5 the structure of the material …

Titanium Incorporated Gallium Oxide (Ga-Ti-O): Structure Property Relationship And Performance Evaluation For Extreme Environment Applications, Sandeep Manandhar

Open Access Theses & Dissertations

The existing power generation systems, which utilize fossil fuels, are in dire need of efficient, reliable chemical sensors that can operate safely at higher temperatures. These sensors control the combustion environment and the emissions during combustion. Several sensing materials such as SnO2, ZnO, TiO2, WO3, and Ga2O3 exhibit high sensitivity to certain type of chemical molecules and in a certain range of temperatures. Among these candidate materials, β-Ga2O3 is stable at very high temperatures and has shown functionality for oxygen sensing at higher temperatures (>700°C). However, the response time and sensitivity must be significantly improved in order to derive …

Streamlining Alloy Design And Thermo-Mechanical Processing Parameters For High Strength Line Pipe Steels And Hot Rolled Microalloyed Steels: Process - Structure - Property Paradigm, Venkata Vignesh Natarajan

Open Access Theses & Dissertations

The process parameters related to thermo-mechanical controlled processing (TMCP) of steels play a vital role in affecting the ultimate mechanical properties. We illustrate here the impact of coiling temperature, the impact of finish cooling temperature on interrupted cooling and compare with continuous cooling, and the impact of carbon and niobium on the microstructure and precipitation behavior and corresponding changes in mechanical properties, in an ultrahigh strength titanium-niobium microalloyed steel. The microstructural advancement was contemplated via transmission electron microscopy and electron backscattered diffraction (EBSD). The goal was to underscore the impact of coiling temperature on the nature and distribution of microstructural …

Evaluation Of Large Area Additively Manufactured Fiber Reinforced Acrylonitrile Butadiene Styrene (Abs), Kevin Schnittker

Open Access Theses & Dissertations

To enable the advancement of large-scale additive manufacturing processes, it is necessary to establish and standardize methodologies to characterize the mechanical properties of printed test coupons. Due to the large size of the print beads, conventional test standards are inadequate. The focus of this study was to determine the feasibility of using Digital image correlation (DIC) technology as a key enabler for robust data collection of strain measurements of large 3D printed parts. To incorporate the DIC measurements, a novel method was developed to prepare large 20 wt.% glass filled ABS test coupons for adequate contrast. Through this technique, Poisson's …

Comparison Of Extruder Systems For 3d Printer Filament Fabrication, Adriana Ramirez

Open Access Theses & Dissertations

Additive Manufacturing (AM) has grown in popularity over the past thirty years, due to its versatility, short design to product cycle, and capability to fabricate complex geometries, which cannot otherwise be produced. There exist several platforms that are able to print objects composed of different materials, making this technology significant in different fields such as: automotive, aerospace, medical, electronics, amongst others. Though several types of AM technologies are available, the expiration of the patents on fused deposition modeling (FDM) in 2009 has led to a widespread use of this platform in academia and home use settings.

Widespread use of FDM-type …

Material Behavior Of Window 7 Carrier Panel Tiles And Thermal Pane Fragments Recovered From The Space Shuttle Columbia, Brenda Roseanne Arellano

Open Access Theses & Dissertations

Since the end of the space shuttle program, a new generation spacecraft has been developed to transport humans back into space. NASAâ??s Orion will carry a crew beyond low-earth orbit and the exploration of Mars may be possible in the future. Space safety becomes significant with human spaceflight and the risks are high. However, aerospace materials may provide opportunities to prevent future disasters. When the space shuttle Columbia disintegrated during re-entry in 2001, thousands of debris were collected for analysis. In contrast, when the Challenger space shuttle broke apart in 1986, all shuttle debris were buried. These tragic disasters are …

The Interplay Between Grain Size And Austenite Stability On Deformation Behavior Of High Strength-High Ductility Combination Nanostructured Stainless Steel, Venkata Sai Ananth Challa

Open Access Theses & Dissertations

The concept of phase reversion involving severe cold deformation of metastable austenite to generate strain-induced martensite, followed by temperature-time annealing sequence, was used to obtain varying grain size from nanograined/ultrafine-grained (NG/UFG) to coarse-grained (CG) regime. This concept was used to obtain â??high strength-high ductilityâ?? combination in nano/ultrafine-grained (NG/UFG) austenitic stainless steel. Using this concept, the objective of the study is to elucidate the dependence of grain size on deformation mechanisms and deformation-induced microstructural changes. The objective was accomplished by combining depth-sensing nanoindentation experiments conducted at various strain rates, and interrupted tensile testing at various strain and post-mortem analyses of deformed …

Dft Study Of Adsorption Of Trimetallic Endohedral Fullerenes On Graphene, Nakul Nitin Karle

Open Access Theses & Dissertations

A density functional theory (DFT) study on the geometric and electronic structure of C60 and Sc3N@C80 along with their adsorption on pristine single layer graphene (SLG) is presented. C60 is found to adsorb in two nearly degenerate configurations: (i) with a pentagon facing the SLG, which is the most stable one, and (ii) with a hexagon facing the SLG in a face-to-face perfect alignment, rarely common in Ï?â??Ï? interactions, 0.06 eV higher in energy. The calculated binding energy of 0.76 eV, which includes dispersion effects, is in good agreement with previous theoretical and experimental reports. On the contrary, Sc3N@C80 adsorption …

Process-Structure-Property Relationship In Magnesium-Based Biodegradable Alloy For Biomedical Applications, Pramanshu Trivedi

Open Access Theses & Dissertations

Magnesium alloys are considered to be the next generation of biomaterials because of their ability to degrade in the physiological environment. We elucidate here the impact of multiaxial forging of Mg-2Zn-2Gd alloy on grain refinement to sub-micron regime and relate the structure to mechanical properties and biological functionality. As-cast and annealed samples were multiaxial forged (MAF) for a total number of two passes with a true strain of ~2/pass. Considering that the microstructure governs the biological response of materials, we studied the constituents of the microstructure in conjunction with the mechanical behavior. The antimicrobial behavior in a Mg-2Zn-2Gd alloy with …

Electronic Structure Studies On Transition Metal Containing Endohedral Fullerenes, Carbon Onions And Zinc Sulfide Cages, Shusil Bhusal

Open Access Theses & Dissertations

We present the most stable structures for VXSc3-XN@C2n (where X=1-3 and 2n=70, 76, 78 and 80) using a systematic procedure that involves all possible isomers of the host fullerene cages. Subsequently, a detailed investigation of structural and electronic properties of the lowest energy isomers is performed using density functional theory in combination with large polarized Gaussian basis sets. The search procedure developed involved structural optimizations of thousands of fullerenes and correctly identifies the experimentally observed VSc2N@C80 and V2ScN@C80 isomer as the most stable structures. The structural analysis shows that a few V-doped endohedral fullerenes do not follow the isolated pentagon …

Organic-Inorganic Graphite And Transition Metal Dichalcogenide Based Composites For 3d Printing, Jorge Alfredo Catalan Gonzalez

Open Access Theses & Dissertations

This project was multipronged to help fuse together topics of additive manufacturing and two-dimensional (2D) layered materials, and studying the mechanical and electrical properties of the composites produced. The composites are made from the thermoplastic polymer acting as a matrix and the graphite and 2D transition metal dichalcogenides (TMDs) serving as the filler or reinforcement. Different concentrations of TMD's were added to the matrix to study the effect of composition on the mechanical and electrical properties. To shed insights into the mechanical properties, test coupons were produced as "dog bone" structures for tensile testing using the ASTM D638 type 5 …

Mechanically Activated Magnesiothermic Combustion Synthesis Of Zirconium And Hafnium Diborides, Sergio Cordova

Open Access Theses & Dissertations

Magnetohydrodynamic (MHD) generation of electric power has the potential to increase the thermal efficiency of fossil-fuel burning power plants. Electrode materials in MHD generators must possess a high melting point, high electrical and thermal conductivities, chemical stability, and resistance to thermal shock, oxidation, and plasma sparks/arcs. Ultra-high temperature ceramics based on diborides of zirconium and hafnium (ZrB2 and HfB2) are promising materials for this application. Self-propagating high-temperature synThesis (SHS) is an attractive method for their large-scale fabrication, but SHS of ZrB2 and HfB2 from elemental Zr, Hf, and B is not economically viable because of the high cost of the …

Methods For Producing Graphene From Petroleum By-Products, Eva M. Deemer

Open Access Theses & Dissertations

N/A

On Demand 3d Printed Hybrid Scaffolds For Tissue Engineering Applications, Ivan D. Hernandez

Open Access Theses & Dissertations

A composite 3D printed polymer scaffold with inbuilt porosity and filled with a hydrogel can provide an ideal support system for cell growth, proliferation, and vascularization. Therefore, a hybrid system of 3D printed polycaprolactone (PCL) scaffold and a hydroxyapatite-based hydrogel was developed for application in the reconstruction of bone defects, which are inherently difficult to repair without any guided therapies. In the present study, a 3D printed gyroid structure of PCL allowed the loading of a higher amount of hydrogel as compared to conventionally used 3D printed mesh structure of the same volume and strut thickness. The hydrogel was composed …

Ac Susceptibility And Epr Investigations Of Superspin Dynamics In Manganese Oxide Nanoparticles, Mahesh Koirala

Open Access Theses & Dissertations

We have investigated the superspin dynamics of 5 nm and 10 nm mixed state Mn3O4 nanoparticles utilizing ac-susceptibility and electron paramagnetic resonance measurements. The out of phase component of the ac-susceptibility measurements show a magnetic anomaly below (T

Protonic Conductors For Intermediate Temperature Fuel Cell Electrolytes: Superprotonic Csh2po4 Stabilization And In-Doped Snp2o7 Structure Study, Heber Jair Martinez Salinas

Open Access Theses & Dissertations

Proton conductor solid electrolytes CsH2PO4 and In-doped tin pyrophosphate have been investigated as candidates to fill a gap of suitable electrolytes for fuel cells at the intermediate temperature range due their unusually high conductivities between 200 and 300 °C. Unfortunately, in the case of CsH2PO4, complicated experimental conditions, like a humidified environment, or high pressure, are needed to preserve the sought high conducting phase.

In the first stage of this work, X-ray diffraction on CsH2PO 4 samples performed in air, and under normal conditions of humidity and pressure, evidence of the cubic phase of CsH2PO4 was observed during short intervals …

Structural And Mechanical Characterization Of Nanocrystalline Tungsten And Tungsten-Based Alloy Thin Films For Extreme Environment Applications, Gustavo Martinez

Open Access Theses & Dissertations

Extreme environments associated with nuclear applications often results in degradation of the physical, mechanical and thermo-mechanical properties of the materials. Tungsten (W) exhibits unique physical and mechanical properties, which makes tungsten a good candidate for nuclear applications; however, intrinsic W exhibits low fracture toughness at all temperatures in addition to a high ductile to brittle transition. In the present work, nanocrystalline W, W-Y and W-Mo alloys were nanoengineered for nuclear applications. Nanocrystalline tungsten coatings with a thickness of ~1 µm were deposited onto Silicon (100) and Sapphire (C-plane) using RF and DC sputtering techniques under various growth conditions. Yttrium content …

Raman Microscopic Analysis Of Internal Stress In Boron-Doped Diamond Thin Films, Emma M.A. Sundin

Open Access Theses & Dissertations

The correlations between induced stress on undoped and boron-doped diamond (BDD) thin films, sample chemical composition, and fabrication substrate are investigated in this study via confocal Raman microspectroscopic analysis. Stability of BDD films is relevant to fast-scan cyclic voltammetry, as film delamination and dislocation of BDD-coated electrodes that can occur during neurosurgical electrode implantation can negatively impact the biosensing reliability of this technique. Electrodes were fabricated by coating cylindrical tungsten rods using a custom-built chemical vapor deposition reactor. The results of the analysis reveal a direct correlation between regions of pure diamond and enhanced material stress, as well as preferential …

Structural And Electrical Characterization Of Tin Oxide Resistive Switching, Arka Talukdar

Open Access Theses & Dissertations

Resistive switching in metal oxide is a phenomenon in which the metal oxide changes its resistance upon application of electric field and thus giving two states; high resistance state (HRS) and low resistance state (LRS). Many metal oxides have been investigated however very little is known about unipolar resistive switching in SnO2 though it has shown excellent resistive switching characteristics. Defects in the material play a vital role in resistive switching of the metal oxides. In this work, the role of defects in resistive switching of SnO2 are investigated in Ti/SnO2/Au structures. Two methods were used to control the concentration …

Comprehensive Finite Element Modeling Of Ti-6al-4v Cellular Solids Fabricated By Electron Beam Melting, Edel Arrieta

Open Access Theses & Dissertations

Additive manufacturing permits the fabrication of cellular metals which are materials that can be highly customizable and possess multiple and extraordinary properties such as damage tolerance, metamorphic and auxetic behaviors, and high specific stiffness. This makes them the subject of interest for innovative applications. With interest in these materials for energy absorption applications, this work presents the development of nonlinear finite element models in commercial software platforms (MSC Patran/Nastran) that permit the analysis of the deformation mechanisms of these materials under compressive loads. In the development of these models, a detailed multiscale study on the different factors affecting the response …

Characterization & Extraction Of Extracellular Matrix From Porcine Adipose Tissue, Rahulkumar Kantibhia Bhoi

Open Access Theses & Dissertations

Tissue in particular extracellular matrix(ECM) plays a vital role in the growth and the function of each cell types and promote tissue regeneration and repair an impair organs. Many techniques have been developed so far to decellularized porcine tissue for the purpose to use as regenerative medicine and in tissue engineering. We aimed to optimized a method to decellularized porcine tissue while effectively eliminating xenogeneic epitopes, lipids and to retain necessary component of it intact without disrupting ECM. We have developed 2-week protocol to optimize well preserved ECM component that may keep xenogeneic biomaterial for tissue engineering and regenerative medicine. …

Fabrication And Testing Of Cfrp Composites With Embedded Piezoelectric Particles For Temperature Sensing And Energy Harvesting, Emilio Tarango Valles

Open Access Theses & Dissertations

As a part of this world's continuous evolution and technological advancements, smart materials and functional composites have become an attractive topic. In many cases, these new functional composites are replacing the traditional engineering material due to their customizable mechanical properties. This Thesis analyzes and demonstrates the signal response, sensing capabilities and structural properties from Carbon/Glass Fiber Reinforced Plastic Composites (CFRP) with embedded Lead Zirconate Titanate Particles (PZT). The added PZT particles function as actuators, giving the composites a functionality. The PZT quantity inside each composite was variated to study better and characterize the mechanical and electrical properties; the variations were …

Implementation Of New System For Oxygen Generation And Carbon Dioxide Removal, Angelo Peter Karavolos

Open Access Theses & Dissertations

This research effort develops an integrated system for CO2 removal and O2 production. A unique material, dodeca-tungsto-phosphoric acid (H3PO4W12O3; henceforth referred to as DTPA) is mixed with tetra-ethyl-ortho-silicate Si(OC2H5)4 or TEOS. This mixture exhibits unique properties of heat absorption and high electrical conductivity. In the system described herein, the DTPA resides within a cross linked arrangement of TEOS. The DTPA furnishes a source of O2, while the TEOS furnishes structural support for the large DTPA crystals. In addition, the large amount of H2O within the crystal also adsorbs CO2. It can also be cross-linked with other polymers such as polycarbonate, …

A Cracking Methodology To Assess Fracture And Fatigue Properties Of Asphalt Concrete Mixtures Using Overlay Tester, Victor M. Garcia

Open Access Theses & Dissertations

Several highway agencies have either implemented or considered implementing performance tests to predict the cracking potential of asphalt concrete (AC) mixtures in the laboratory setting. One such test, the Overlay Tester (OT) test, measures the number of cycles to failure of the AC specimens by simulating the opening and closing of the cracks induced by daily temperature variations and high tensile strain generated by the traffic load. The variability of the OT test results is expressed as a major concern in reliably characterizing the cracking potential of the AC mixes.

The performance of the OT test, in general, and current …

Liquid-Phase Exfoliation Of Two-Dimensional Graphite For Ink-Jet Printing, Monica Michel

Open Access Theses & Dissertations

Over the last decade, the study of two-dimensional (2D) materials has seen an incredible growth due to their unique thermal, mechanical and electronic properties. Solution phase manufacturing offers a way in which they can be produced at large scale by creating dispersions from the exfoliated material. Once created, different options for assembling devices exist. One technique for large scale manufacturing of materials in this form is ink-jet printing, which is a form of additive manufacturing that has proven to be attractive for the printed electronics industry. One challenge that ink-jet printing still faces is the shortage of inks with appropriate …