Open Access. Powered by Scholars. Published by Universities.®
Materials Science and Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Tensile strength (11)
- Mechanical properties (6)
- Microstructure (6)
- Performance (6)
- Simulation (6)
-
- Activated carbon (5)
- Bacterial cellulose (5)
- Biodiesel (5)
- CFD (5)
- Composite (5)
- Surface roughness (5)
- ANSYS (4)
- Hardness (4)
- Material (4)
- Pyrolysis (4)
- SEM (4)
- Temperature (4)
- Biocomposite (3)
- Bioethanol (3)
- Bioplastic (3)
- Cassava starch (3)
- Efficiency (3)
- Energy efficiency (3)
- FEA (3)
- FTIR (3)
- Heat treatment (3)
- Morphology (3)
- NaOH (3)
- Permeability (3)
- Roughness (3)
Articles 151 - 180 of 191
Full-Text Articles in Materials Science and Engineering
The Influence Of The Reference Area Of Aileron On The N2xx Aircraft Using Computational Fluid Dynamics, Siti Nur Rahmah, Gaguk Jatisukamto, Hary Sutjahjono
The Influence Of The Reference Area Of Aileron On The N2xx Aircraft Using Computational Fluid Dynamics, Siti Nur Rahmah, Gaguk Jatisukamto, Hary Sutjahjono
Journal of Mechanical Engineering Science and Technology (JMEST)
Aileron is a control surface that functions as a regulator of roll motion. The movements of the ailerons are opposite to the left and right sides. Previous studies have shown that graphs of hinge moment coefficient (Chm) values increases with increasing angle of attack. This study is to determine the aerodynamic characteristics of aileron by combining the surface area of the vane into the aileron by varying the aileron’s deflection. The calculation is performed using a numerical method in two dimensions (2D) commercial CFD simulation software. The results of the study concluded that the hinge moment coefficient for modified airfoil …
Hardness Evaluation On Ss 316l Joined With Gas Tungsten Arc Welding Under Constant Heat Treatment, Duwi Leksono, Imam Sudjono
Hardness Evaluation On Ss 316l Joined With Gas Tungsten Arc Welding Under Constant Heat Treatment, Duwi Leksono, Imam Sudjono
Journal of Mechanical Engineering Science and Technology (JMEST)
The purpose of this study is to show the hardness of the GTAW welding results on SS 316L metal with surface heating during the welding process. Observations in this study used SS 316L material with heat temperature regulation on the metal surface of the welding process using heating variations of 100 ℃, 120 ℃ and 140 ℃. The welding process of SS 316L material used a welding joint model uses single V-type welding joint with an angle of 60°, a spacing of 2 mm, a root surface of 1 mm and a thickness of 5 mm. Vickers hardness test was …
The Effect Of Heat Treatment To The Erosion Rate Of Brass Composite, Aminnudin Aminnudin, Solichin Solichin
The Effect Of Heat Treatment To The Erosion Rate Of Brass Composite, Aminnudin Aminnudin, Solichin Solichin
Journal of Mechanical Engineering Science and Technology (JMEST)
Brass composites can be improved their mechanical properties by the heat treatment process. The improvement of the mechanical properties of this technique is expected to increase the resistance of the composite to erosion that occurs in the environment of flow water. Brass composites used are compositeswith fly ash 5, 10, 15, and 20%. The heat treatment process was carried out using electric furnace withoutprotective gas. Composite heat up to 350°C and 400°C for 30 min. and quenching with water. Before and after the erosion test, the weight of the test specimen was weighed with analytical scales. The treatment process affects …
Performance Enhancement Of Shell And Tube Heat Exchanger On Parallel Flow With Single Segmental Baffle, Avita Ayu Permanasari, Poppy Puspitasari, Sukarni Sukarni, Retno Wulandari
Performance Enhancement Of Shell And Tube Heat Exchanger On Parallel Flow With Single Segmental Baffle, Avita Ayu Permanasari, Poppy Puspitasari, Sukarni Sukarni, Retno Wulandari
Journal of Mechanical Engineering Science and Technology (JMEST)
The shell and tube heat exchanger was a tool to exchange the heat energy between fluids with different temperatures that occurred through direct or indirect contact. The energy exchange in fluids could be occurred with the same phase (liquid to liquid or gas to gas) or two fluids with different phase. To date, the process of heat transfer in the industrial field was crucial in machine work. Therefore, there were studies directed to optimize and develop the function and thermal performance of a heat exchanger by adding Baffles to the side of the shell. Vortex flow that occurs with the …
The Effect Of Solution Treatment Temperature And Quenching Media Variation In Heat Treatment Process Cu-Zn-Al Shape Memory Alloys On Shape Memory Effect And Microstructures, Wikan Jatimurti, Monica Gayatri K, Mavindra Ramadhani, Rochman Rochiem
The Effect Of Solution Treatment Temperature And Quenching Media Variation In Heat Treatment Process Cu-Zn-Al Shape Memory Alloys On Shape Memory Effect And Microstructures, Wikan Jatimurti, Monica Gayatri K, Mavindra Ramadhani, Rochman Rochiem
Journal of Mechanical Engineering Science and Technology (JMEST)
Shape memory alloys (SMAs) are metal alloys with a reversible ability to recover their shape at a certain temperature after being deformed. This ability referred to as Shape Memory Effect (SME). The application of SMAs such as Ni-Ti and Cu-Zn-Al alloys usually used on automotive, biomedical, etc. The commonly used SMA is Ni-Ti because of its superior SME properties than Cu-Zn-Al, even though the price is quite higher. The SME of Cu-Zn-Al might be improved by increasing the presence of the martensite phase in its microstructure by heat treatment. The heat treatment process given to Cu-21Zn-5Al alloy is a homogenizing, …
The Flame Characteristics Of Diesel Fuel Blend With Kepuh (Sterculia Foetida) Biodiesel, Dani Hari Tunggal Prasetiyo, Nasrul Ilminnafik, Salahuddin Junus
The Flame Characteristics Of Diesel Fuel Blend With Kepuh (Sterculia Foetida) Biodiesel, Dani Hari Tunggal Prasetiyo, Nasrul Ilminnafik, Salahuddin Junus
Journal of Mechanical Engineering Science and Technology (JMEST)
Kepuh biodiesel fuel (sterculia foetida) is an alternative fuel that can be used to replace fossil fuel. Diesel fuel is performed to determine the laminar burning velocity and high flame by adding biodiesel kepuh volume of 10%, 20%, 30%. The purpose of this study was to study the effect of biodiesel and the effect of bunsen burners on the laminar burning velocity and flame height. Bunsen burner is made of copper and stainless steel. Testing of flame characteristics was carried out by heating the mixture of fuel and air at a temperature of 200°C. The purpose of heating the air …
Critical Solid Fraction Point Analysis: Case Study On Cement Mill Machine Diaphragm, Mochamad Achyarsyah, Poppy Puspitasari
Critical Solid Fraction Point Analysis: Case Study On Cement Mill Machine Diaphragm, Mochamad Achyarsyah, Poppy Puspitasari
Journal of Mechanical Engineering Science and Technology (JMEST)
During the solidification process, metal liquids turn into solid geometry units including the riser and gating system. The disruption in the liquid flow often causes shrinkage in the object. Critical Solid Fraction Point is a critical point where the continuous liquid supply turned solid and unable to pour to some sections. Simulation software can predict the critical solid fraction time of an object and the liquid supply behavior. The simulation helps the designer in the casting design. The application of low steel alloys in the cement industry, e.g., the Diaphragm, needs development to minimize the shrinkage. This research aimed to …
Characteristic Analysis Of Horizontal Axis Wind Turbine Using Airfoil Naca 4712, Bili Darnanto Susilo, Gaguk Jatisukamto, Nurkoyim Kustanto
Characteristic Analysis Of Horizontal Axis Wind Turbine Using Airfoil Naca 4712, Bili Darnanto Susilo, Gaguk Jatisukamto, Nurkoyim Kustanto
Journal of Mechanical Engineering Science and Technology (JMEST)
Wind energy has been developed and used as a source of electrical energy by converting wind energy into electrical energy using a generator. There are some wind turbine parameters that important for wind turbines design and model, includes the size of the rotor radius, airfoil selection, chord length, and pitch angle. The study aims to characterize the performance of a horizontal axis wind turbine using computational methods. The methods used a design and simulation of NACA 4412 and NACA 4712 airfoil using QBlade software using wind conditions in the region of Pancer, Jember. Results show that the maximum Cl value …
Synthesis And Applications Of Hematite Α-Fe2o3 : A Review, Muhamad Muhajir, Poppy Puspitasari, Jeefferie Abdul Razak
Synthesis And Applications Of Hematite Α-Fe2o3 : A Review, Muhamad Muhajir, Poppy Puspitasari, Jeefferie Abdul Razak
Journal of Mechanical Engineering Science and Technology (JMEST)
This article reviewed the hematite α-Fe2O3. It focuses on its material properties, nanostructures, synthesis techniques, and its numerous applications. Researchers prepared the hematite nanostructure using the synthesis methods such as hydrothermal, and, further, enhanced it by improving the techniques to accommodate the best performance for specific applications and to explore new applications of hematite in humidity sensing.
Failure Analysis On Titen Proto-Xx Car Chassis, Gaguk Jatisukamto, Rika Dwi Hidayatul Qoryah, Santoso Mulyadi
Failure Analysis On Titen Proto-Xx Car Chassis, Gaguk Jatisukamto, Rika Dwi Hidayatul Qoryah, Santoso Mulyadi
Journal of Mechanical Engineering Science and Technology (JMEST)
The car chassis as a skeleton supports all loads and is the most important component. Car chassis requirements must be rigid, twisting resistant, vibration resistant and resistant to fatigue. This study aims to find the cause of the failure of the Titen Proto-XX car chassis connection. The research methodology was conducted by testing the composition of materials and structural analysis using Ansys Workbench Release 15.0 software. The conclusion of the research is that the skeletal structure material uses Aluminum AA series 1XXX with Al content greater than 99.5%, the welding ability is low, causing a failure in the welded joint. …
The Effect Of Chlorophyll Concentration From Papaya Leaves On The Performance Of Dye-Sensitized Solar Cell, Dede Rizali, Heru Suryanto, Sukarni Sukarni
The Effect Of Chlorophyll Concentration From Papaya Leaves On The Performance Of Dye-Sensitized Solar Cell, Dede Rizali, Heru Suryanto, Sukarni Sukarni
Journal of Mechanical Engineering Science and Technology (JMEST)
Dye-Sensitized Solar Cell (DSSC) is the third generation solar cell that has sandwich structure consisted of organic dye material and other components such as titanium dioxide (TiO2) semiconductor, electrolyte, and substrates (counter electrode and working electrode). The dye in the device was made from green plant chlorophyll such as papaya. This research aimed to find the influence of dye concentration from papaya leaves chlorophyll on the performance of DSCC. The discussion covered the output power (Pout), Fill Factor (FF), and efficiency (ɳ). The method in this research was explorative experimental with independent variables such as direct and indirect sunlight. The …
Preparation Of Chitosan-Polyethylene Oxide-Colocasia Esculenta Flour Nanofibers Using Electrospinning Method, Riesca Ayu Kusuma Wardhani, Lia Asri, Muhamad Nasir, Bambang Sunendar Purwasasmita
Preparation Of Chitosan-Polyethylene Oxide-Colocasia Esculenta Flour Nanofibers Using Electrospinning Method, Riesca Ayu Kusuma Wardhani, Lia Asri, Muhamad Nasir, Bambang Sunendar Purwasasmita
Journal of Mechanical Engineering Science and Technology (JMEST)
Nanofibers have been prepared from the mixture of chitosan, polyethylene oxide (PEO) and Colocasia esculenta flour (CE flour) by using the electrospinning method. Two different nanofibers were formulated, containing chitosan-PEO and chitosan-PEO-CE flour. The higher concentration of PEO (3%chitosan-6%PEO) (w/v) resulted in more uniform chitosan-PEO electrospun nanofibers without beads. Chitosan-PEO-CE flour was prepared by addition of colloidal CE flour into the solution containing 3%chitosan-6%PEO with variation of the CE flour concentration of 5, 15 and 25% (w/v). Scanning Electron Microscopy demonstrated that the average diameter of chitosan-PEO nanofibers was 128±41 nm, whereas the diameter of chitosan-PEO-CE flour nanofibers was 159±45 …
Study On The Thermal Distortion, Hardness, And Microstructure Of St 37 Steel Plate Joined Using Fcaw, Maijuansyah Maijuansyah, Yanuar Rohmat Aji Pradana, Gaguk Jatisukamto, Solichin Solichin
Study On The Thermal Distortion, Hardness, And Microstructure Of St 37 Steel Plate Joined Using Fcaw, Maijuansyah Maijuansyah, Yanuar Rohmat Aji Pradana, Gaguk Jatisukamto, Solichin Solichin
Journal of Mechanical Engineering Science and Technology (JMEST)
This study sets out to investigate the distortion angle, microstructure, and hardness of St 37 steel plate weld joint produced by FCAW using the welding current of 80, 110, and 140 A. By using flat position, CO2 and E71T-1 wire were utilized as a shielding gas and electrode filler, respectively. The distortion angle measurement was done on 3 different locations of the welded sample perpendicular to weld direction by using bevel protractor. The micro Vickers tests were then applied gradually at the crosssectional surface with a distance of 0, 5, 10 and 15 mm from weld centerline using the load …
Comparison Study Of Mechanical Properties Of Al-Si Alloy With And Without Nanoreinforce Iron Oxide (Fe2o3), Cepi Yazirin, Poppy Puspitasari, Muhamad Fatikul Arif
Comparison Study Of Mechanical Properties Of Al-Si Alloy With And Without Nanoreinforce Iron Oxide (Fe2o3), Cepi Yazirin, Poppy Puspitasari, Muhamad Fatikul Arif
Journal of Mechanical Engineering Science and Technology (JMEST)
Nanoreinforce materials such as ZnO, eggshell, Al2O3, TiO2, and ZrO2 have been shown to improve the mechanical properties of Al-Si alloy. Nanomaterial Fe2O3 has many applications as catalysts reaction in electronic devices, for example, semiconductor materials, paint formulations, lithium rechargeable batteries, and is often applied in industrial fields. It is known that Fe2O3 can be synthesized through the stirring process on machine and method used will involve several steps that relatively take a long time. In this study, Al-Si alloy reinforced by using nanomaterial Fe2O3 which sintered at a temperature of 600C for 3 hours aimed to improve mechanical and …
The Effect Of Chemical Pretreatment Process On Mechanical Properties And Porosity Of Bacterial Cellulose Film, Tito Arif Sutrisno, Heru Suryanto, Retno Wulandari, M. Muhajir, Shikh Mohd Shahrul Nizan Shikh Zahari
The Effect Of Chemical Pretreatment Process On Mechanical Properties And Porosity Of Bacterial Cellulose Film, Tito Arif Sutrisno, Heru Suryanto, Retno Wulandari, M. Muhajir, Shikh Mohd Shahrul Nizan Shikh Zahari
Journal of Mechanical Engineering Science and Technology (JMEST)
Bacterial cellulose (BC) is a natural polymer which have superior properties, like high porosity, high purity, and high permeability. The study objective is to determine the influence of chemical pretreatment on tensile strength and the porosity of BC. The method was to make BC films from pineapple peel extract through fermentation process for 14 days. The pretreatment was conducted by immersion of BC in BmimCl, H2O2, and NaOH solution with a concentration of 2.5%; 5%; and 7.5 %, heated at 80 °C then dried in the oven, and the samples were then tested by a tensile test using ASTM-D636-V standard, …
The Characteristic Of Overhang Object To Material Usage On Fdm 3d Printing Technology, Redyarsa Dharma Bintara, Aminnudin Aminnudin, Zumrotul Ida, Ferian Rizki Arbianto, Dani Prasetiyo
The Characteristic Of Overhang Object To Material Usage On Fdm 3d Printing Technology, Redyarsa Dharma Bintara, Aminnudin Aminnudin, Zumrotul Ida, Ferian Rizki Arbianto, Dani Prasetiyo
Journal of Mechanical Engineering Science and Technology (JMEST)
Fuse Deposition Modeling (FDM) 3D printing is one of additive manufacturing technology which physical 3D model is build up layer by layer. The support structure is almost involved on the process if overhang shape is met on the 3D model. It has main function to prevent the 3D printed model from collapsing. Commonly, the single material source of FDM 3D printer machine is to supply building two structure, structure of main 3D object and support structure. Hence, our goal optimizes the using of support material for reducing the main material usage. Furthermore, the sixteen of variation overhang angle is set …
Elastic Linear Analysis Of Connecting Rods For Single Cylinder Four Stroke Petrol Engines Using Finite Element Method, Didin Zakariya Lubis, Andoko Andoko
Elastic Linear Analysis Of Connecting Rods For Single Cylinder Four Stroke Petrol Engines Using Finite Element Method, Didin Zakariya Lubis, Andoko Andoko
Journal of Mechanical Engineering Science and Technology (JMEST)
A connecting rod is one of the most critical parts in engine assembly which transfers energy from the piston to the crankshaft. The connecting rod mainly undergoes tensile and compressive loading under engine cyclic process. The forces acting on the connecting rod are forces due to maximum combustion pressure and forces due to the inertia of the connecting rod. This research aimed to analyze the design of the connecting rod of single-cylinder four-stroke engines. This study used CAD software for modeling and structural design. Stresses generated across all the locations of the connecting rod were evaluated using FEA Software. Elastic …
Analysis Of Casting Defect, Tensile Strength, And Hardness Of Al-Si Casting Alloy With Percentage Variation Of Clay Binder Bangkalan, Imam Muhtarom, Sunomo Sunomo
Analysis Of Casting Defect, Tensile Strength, And Hardness Of Al-Si Casting Alloy With Percentage Variation Of Clay Binder Bangkalan, Imam Muhtarom, Sunomo Sunomo
Journal of Mechanical Engineering Science and Technology (JMEST)
Casting is one of method that used in forming the work piece by melting specific metal and pouring into moulding that has been prepared. This study aimed to determine the effect of the use of Bangkalan clay as binder in sand moulding against tensile strength, hardness, and defects in Al-Si casting alloy by using gravity casting method. The method used in this study was experimental method then using descriptive analysis. Descriptive analysis included explanation of the test result of tensile strength, hardness, and the type of surface defect of Al-Si casting. Based on the research result obtained the highest shear …
Analysis Of Hardness, Quality And Fluidity Al-Si Casting Result By Using Clamshell (Placuna Placenta) As The Mixture Of Sand Moulding, Shikh Mohd Shahrul Nizan Shikh Zahari, Saif Aziz Saputra, Putut Murdanto
Analysis Of Hardness, Quality And Fluidity Al-Si Casting Result By Using Clamshell (Placuna Placenta) As The Mixture Of Sand Moulding, Shikh Mohd Shahrul Nizan Shikh Zahari, Saif Aziz Saputra, Putut Murdanto
Journal of Mechanical Engineering Science and Technology (JMEST)
Metal is an element that cannot be separated from human life. Almost all of human activities includes metal element in it. Metals can be formed through several ways, one of which is metal casting. Metal casting is one of technique in producing products where the metal was melted in crucible and then poured in a moulding which is similar to the original shape of the product. Moulding that are commonly used are sand moulding. Commonly, binder which used in sand casting process is bentonite. Bentonite, was kind of mineral which can be run out during its usage. This study aimed …
Analysis Of Mechanical Properties And Permeability Of Sand Moulding By Using Eggshell In Sand Casting, Wahyu Kurnianto, Poppy Puspitasari, Wahono Wahono
Analysis Of Mechanical Properties And Permeability Of Sand Moulding By Using Eggshell In Sand Casting, Wahyu Kurnianto, Poppy Puspitasari, Wahono Wahono
Journal of Mechanical Engineering Science and Technology (JMEST)
This study aimed to analyse the usage of Eggshell as mixture material of bentonite in metal casting process which used dried sand moulding. Eggshell variations in this study were 4%, 7%, 10% eggshell, and additional 3% of bentonite on each sample. This study used pre-experimental method and included to OneShot Case Study model. The highest strength was found on the sample 3 ES 10%. Tensile strength of dried sand moulding reach up to 0.09 kg/cm2, the compressive strength of dried sand moulding reached up to 3.11 kg/cm2, and the shear strength of dried sand moulding reached up to 1.13 kg/cm2. …
The Analysis Of Permeability And Mechanical Properties Of Sand Moulding Using Mixed Material Clamshell (Placuna Placenta) On Sand Casting, Kritchakhris Nawettanaprasert, Zakaria Bagus Aminanta, Putut Murdanto
The Analysis Of Permeability And Mechanical Properties Of Sand Moulding Using Mixed Material Clamshell (Placuna Placenta) On Sand Casting, Kritchakhris Nawettanaprasert, Zakaria Bagus Aminanta, Putut Murdanto
Journal of Mechanical Engineering Science and Technology (JMEST)
This study objected to determine mechanical properties of sand moulding by conducting tensile test, compressive and shear test, and also permeability test. This study also had the other objective that was analyse clamshell (Placuna placenta) as mixture material for bentonite as binder in manufacturing sand moulding in order to reduce the usage of bentonite. The method that used in this study was pre-experimental method with One-Shot Case Study model. The best mechanical properties obtained on sample 3 clamshell 11%, permeability results obtained was 190 ml/min, tensile strength results obtained for the dry sand was 0.015 kg/cm2, compressive strength obtained for …
The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin
The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin
Journal of Mechanical Engineering Science and Technology (JMEST)
Electric arc welding with covered electrodes is ideally suited for flat plates. If this technique is employed for welding rigid bodies, the results would be of poor quality. One viable solution to weld rigid bodies is through friction welding. The study aimed to investigate the tensile strength of specimens subjected to friction welding with variations in rotational speed, friction time, and pressure and to examine the microstructure of friction welding joints. This research used the one-shot case study design and involved descriptive analysis. The descriptive analysis described the results of tensile testing and microstructure of welding joints. Results showed that …
Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati
Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati
Journal of Mechanical Engineering Science and Technology (JMEST)
Indonesia one of the tropical countries in the world can not be separated from environment problems like other developing countries. One of the causes of declining environment quality is the decline of forests in Indonesia. In 2009, Indonesia’s forest area was by more than half, to about 88 million hectares. By the year 2013 the number is about 82 million hectares. One of the efforts to promote environment education is to familiarize planting plants to children from an early age from the school environment to the family environment. Therefore it is necessary an alternative in the form of planting media …
Effect Of Mnfe2o4 Nanoparticles To Reduce Co And Hc Levels On Vehicle Exhaust Gas Emissions, Poppy Puspitasari, Sukarni Sukarni, Amir Hamzah
Effect Of Mnfe2o4 Nanoparticles To Reduce Co And Hc Levels On Vehicle Exhaust Gas Emissions, Poppy Puspitasari, Sukarni Sukarni, Amir Hamzah
Journal of Mechanical Engineering Science and Technology (JMEST)
The air pollution particle emitted from transportation in Indonesia Bay 2015 consist of 70.50% CO; 18.34% HC; 8.89% NOx; 0.88% SOx; 1.33%. These gases are very harmful to humans. To reduce the toxic gas effect, special treatment is needed, one of them is by applying catalyst on exhaust system. MnFe2O4 has the potential to bind the CO and HC elements contained in the exhaust gas. This study aims to investigate the effect of MnFe2O4 addition on catalityc converter towards CO gas and HC emissions of motor vehicles. Therefore, the percentage of exhaust reduction with and without applying MnFe2O4 on varied …
Damage Simulation Of Pre-Forming V-Neck Plates With Variations In Material Type, Time And Temperature Using The Taguchi Method, Avita Ayu Permanasari, Rr. Poppy Puspitasari, Kevin Valiant Cahya, Mahfud Ihsan
Damage Simulation Of Pre-Forming V-Neck Plates With Variations In Material Type, Time And Temperature Using The Taguchi Method, Avita Ayu Permanasari, Rr. Poppy Puspitasari, Kevin Valiant Cahya, Mahfud Ihsan
Journal of Mechanical Engineering Science and Technology (JMEST)
In metal forming, damage can be caused by several factors: load on the workpiece, initial heating temperature, and temperature due to the friction between the die and the material for pre-forming. The metal forming process can be executed in 2 ways, namely by hot working and cold working. During these two types of mechanical working process, the metal undergoes plastic deformation. In hot working, the required deformation force is relatively low, and changes in mechanical properties are also insignificant. In cold working, a higher force is required, but the strength of the metal will increase significantly. The use of simulation …
Mechanical Properties And Permeability Of Sand Casting Moulds With Eggshells Binder, Maryam Sharifi Jebeli Sharifi Jebeli, Wahyu Kurnianto, Wahono Wahono
Mechanical Properties And Permeability Of Sand Casting Moulds With Eggshells Binder, Maryam Sharifi Jebeli Sharifi Jebeli, Wahyu Kurnianto, Wahono Wahono
Journal of Mechanical Engineering Science and Technology (JMEST)
This research aimed to analyse whether or not eggshell could be a potential addition to sand mould composition as a binding material together with bentonite. Different amounts of eggshell material, i.e. 4%, 7%, 10% and 3%, were added to each sample. This study was a type of pre-experimental design called the one-shot case study. Among all sand moulds under study, sample 3 10% ES in dry conditions had the highest tensile, compressive and shear strengths of 0.09 Kg/cm2, 3.11 Kg/cm2 and 1.13 Kg/cm2, respectively. The results of the permeability test with heat treatment at 110˚C for 60 minutes showed that …
Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto
Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto
Journal of Mechanical Engineering Science and Technology (JMEST)
Synthetic Synthetic plastic is chemical materials which cause severe environmental problems. Incinerating plastic waste leads to release of hazardous gases, which is not good for humans. Bioplastic can help reduce the dependence on fossil fuels and petroleum, that bioplastic can solve the problem of synthetic plastic use. This research aims to define the properties of the cassava starch-based bioplastic reinforced by nanoclay. Methods were experimental with bioplastic component of cassava starch, glycerol as plasticizer and nanoclay as reinforcement. The bioplastic was analyzed using XRD, tensile test, moisture absorption, biodegradability, and compared with another bioplastic. The results show that the addition …
Blanking Clearance And Punch Velocity Effects On The Sheared Edge Characteristic In Micro-Blanking Of Commercially Pure Copper Sheet, Didin Zakariya Lubis, Ichsan Ristiawan
Blanking Clearance And Punch Velocity Effects On The Sheared Edge Characteristic In Micro-Blanking Of Commercially Pure Copper Sheet, Didin Zakariya Lubis, Ichsan Ristiawan
Journal of Mechanical Engineering Science and Technology (JMEST)
This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr height and rollover, and a larger shear zone. Furthermore, it could be observed that the part-edge quality improvement when blanking with high punch velocity is much more distinct for …
Formula Of Moulding Sand, Bentonite And Portland Cement To Improve The Quality Of Al-Si Cast Alloy, Andoko Andoko, Poppy Puspitasari, Avita Ayu Permanasari, Didin Zakaria Lubis
Formula Of Moulding Sand, Bentonite And Portland Cement To Improve The Quality Of Al-Si Cast Alloy, Andoko Andoko, Poppy Puspitasari, Avita Ayu Permanasari, Didin Zakaria Lubis
Journal of Mechanical Engineering Science and Technology (JMEST)
A binder is any material used to strengthen the bonding of moulding sand grains. The primary function of the binder is to hold the moulding sand and other materialstogether to produce high-quality casts. In this study, there were four binder compositions being tested, i.e. 5% bentonite + 5% Portland cement, 4% bentonite + 6% Portland cement, 6% bentonite + 4% Portland cement, and 7% bentonite + 3% Portland cement. Each specimen was measured for its compressive strength, shear strength, tensile strength and permeability. The highest compressive strength was obtained fromthe specimen composed of 6% bentonite+ 4% Portland cement. The highest …
Modeling Of Antenna For Deep Target Hydrocarbon Exploration, Nadeem Nasir, Noorhana Yahya, Hasnah Mohd Zaid, Afza Shafie, Norhisham Hamid
Modeling Of Antenna For Deep Target Hydrocarbon Exploration, Nadeem Nasir, Noorhana Yahya, Hasnah Mohd Zaid, Afza Shafie, Norhisham Hamid
Journal of Mechanical Engineering Science and Technology (JMEST)
Nowadays control source electromagnetic method is used for offshore hydrocarbon exploration. Hydrocarbon detection in sea bed logging (SBL) is a very challenging task for deep target hydrocarbon reservoir. Response of electromagnetic (EM) field from marine environment is very low and it is very difficult to predict deep target reservoir below 2km from the sea floor. This work premise deals with modeling of new antenna for deep water deep target hydrocarbon exploration. Conventional and new EM antennas at 0.125Hz frequency are used in modeling for the detection of deep target hydrocarbon reservoir. The proposed area of the seabed model (40km ´ …