Materials Science and Engineering Commons^™

Study Of The Influence Of B2o3 Oxide On The Physical And Technical Properties Of Ground Enamel Obtained Based On Local Raw Material Components, Shoxrux B. Naimov, Mastura Kh. Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the study was to obtain ground enamel based on local raw materials and to study the effect of boron oxide. The selection of local raw materials for producing ground enamel showed that the resulting glass compositions are in the SiO₂–Al₂O₃–Na₂O–K₂O–CaO–B₂O₃ system. To adjust the properties, additives of nickel oxide and cobalt oxide were used. The properties of the developed compositions of primer enamels meet the requirements of GOST 24405-80. It has been determined that the addition of boron and an increase in its amount …

Formation Of Luminescent Coatings With The Use Of Low Melting Glass, Eygeniy N. Poddenezhny, Ekaterina E. Trusova, Andrei A. Boiko, Ekaterina R. Kravcova, Olga V. Davydova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the present research is to develop compounds and technologies for applying the luminous vitrocrystalline compounds to smooth and ribbed glass substrates in LED lamp structure with a remote photoconverter that contains oxide low melting glass as the base and nanostructured cerium–doped yttrium–aluminum garnet powder as the luminophore. The luminescent coatings based on nanostructured cerium doped yttrium-aluminum garnet powder and low melting glass of composition BaO-Bi₂O₃-B₂O₃-K₂O-SiO₂ where prepared. YAG:Ce³⁺ powder was synthesized by the method of thermochemical reaction. Silica glass powder was introduced into the composition …

Anomalous Of Resistance And Magnetic Susceptibility At 280-310 K And Ambient Pressure In Bismuth Cuprates Synthesized By Solar Energy, Dilbara Dj. Gulamova, Elyor B. Eshonkulov, Valeriya R. Li, Grigor I. Mamniashvili, Timur I. Gulamov

CHEMISTRY AND CHEMICAL ENGINEERING

In order to obtain the full content of high-temperature superconducting phases using the “Super Fast Alloys Quenching” technology in the Large Solar Furnace (Parkent), precursors of bismuth cuprates of the series Bi_1,7Pb_0,3Sr₂Ca_(n-1)Cu_nO_y, n=3-30 were synthesized. Methods for study the properties of precursors are presented. The oriented nano-sized microstructure and layered structure of nanocrystalline nuclei are shown. The phase composition of the precursors at the beginning of the series (n=3-5) is represented by X-ray amorphous and crystalline phases. An increase in the content of CaO and CuO destabilizes the …

Waste Utilization In Korean Cement Plants, Geun-Seong Lee, Zebo Abdullaevna Babakhanova, Mastura Khikmatovna Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The kiln process in cement plant has the advantage of completely and effectively destroying and burning all organic substances due to high temperature and long residence time, oxygen atmosphere and excellent mixing effect, alkaline conditions of raw materials, and incorporation of trace metals into clinker, and plays a role as a pollutant emission barrier during waste utilization. Waste utilization technology is now proven and successful in cement plants. The waste utilization in Korean cement plants are greatly expanding in the view of energy and material recoveries, and economics as well as environmental preservation. Research on waste utilization in the Korean …

Study Of Reactive Distillation Equipment For Eterification Process, Abbos Elmanov, Abdulaziz Bakhtiyorov, Adham Norkobilov, Olimjon Maksudov, Zarif Oripov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen as the object of research. А reаctive distillаtion system is exаmined to produce for the production of Ethyl Acetate (EtAc) viа eterificаtion of acetic acid (HAc) with ethаnol. Optimizаtion methods using sensitivity analysis аre аlso conducted. Cаlculаtion of vаpor liquid equilibrium of the mixture system is done using UNIFАC model. Heat integration from the distillate stream of the column to the acid feed stream and from bottom …

Numerical Calculation Of The Flame Spreading Over A Methane Hydrate Surface, Otabek Nigmatov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The Methane Hydrate is expected as an energy source and is being as a medium distance transport means of natural gas alternative of LNG (Liquefied Natural Gas). During the natural gas transportation, fire accidents are concerned. In the present study, the flame spreading over a methane hydrate surface has been studied numerically as a function of hydrate surface temperature, T_s. When T_s = 173 K (-100℃), lower than the dissociation temperature (T_d = 183 K (-90℃)), the flame spreading speed is around 6.5 mm/s, while the flame spreading speed at T_s = 193 K (-80℃), …

Dft Study Of Quantum Chemical Parameters Of 4-Amino-2-Mercaptobenzimidazole And Their Tautomeric Forms, Dilnoza Rahmonova, Alisher Eshimbetov, Lobar Gapurova, Zuhra Ch. Kadirova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

Coordination competing donor centers, electronic and geometric structures of the 4-amino-2-mercaptobenzimidazole ligand molecule were studied using quantum chemical calculation by the DFT / 6-31G method (d, p). It was shown that during the formation of the metal complex, the ligand is coordinated through the localized nitrogen atom of the imidazole ring. In this study, the total energies (Etot) of 4-amino-2-mercaptobenzimidazole (1) and its tautomeric forms (2 and 3) were calculated. And also, the energies of boundary molecular orbitals, the energy gap between boundary MOs (ΔE) and the distribution of the total charge on atoms and boundary orbitals were determined. In …

The Effect Of Hydrogen Peroxide And Potassium Amylxanthate On The Surface Properties Of Chalcocite And Enargite, Berdakh T. Daniyarov, Hajime Miki, Daminbek A. Ziyatov, Shahlo Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

The effect on the surface properties and floatability of chalcocite and enargite after oxidative treatment with hydrogen peroxide (H₂O₂) in the presence and absence of potassium amylxanthate (PAX) as a collector was studied. In this research, flotation tests were carried out on mixed and individual minerals. Oxidative treatment with hydrogen peroxide had a negative effect on the floatability of chalcocite and enargite. PAX adsorption analysis shows that enargite adsorbs PAX faster than chalcocite. Moreover, Fourier transform infrared spectroscopy analysis shows that PAX was adsorbed in the form of copper amylxanthate on chalcocite and enargite surfaces. In …

Influence Of The Amount Of Monoethanolamine On The Physicochemical Properties Of Aminolysis Products, Soxibjon A. Egamberdiyev, Muzaffar G. Alimukhamedov, Juraev Asror, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this paper is to investigate the process of aminolysis of secondary polyethylene terephthalate with monoethanolamine at low ratio. The effect of the amount of monoethanolamine on the physical and chemical properties of the aminolysis product of secondary polyethylene terephthalate was studied. With an increase of 1-4 moles of monoethanolamine obtained for synthesis (without the presence of a catalyst), it was observed that the number of amines in the aminolysis product increased from 324 to 503 mgKON/g, and the number of hydroxyls increased from 298 to 491 mgKON/g. The structure of the resulting bis(2-hydroxyethylene)terephthalamide was studied using IR …

Study Of The Structure Of Glass Ionomer Cements Developed Based On Glass System Sio2-Al2o3-Cao-Zno-P2o5-Caf2, Tatyana O. Nam, Mastura X. Aripova, Ripsime V. Mkrtchyan

CHEMISTRY AND CHEMICAL ENGINEERING

The goal was to study the structure of glass ionomer cements (GIC) developed on the basis of glasses of the SiO₂-Al₂O₃-CaO-ZnO-P₂O5-CaF₂ system. Glass powders with sizes less than 50 μm were sealed with a 40% solution of polyacrylic acid and after 72 hours, electron microscopic examination was carried out on a JSM-IT200 scanning microscope (JEOL, Japan). All samples demonstrate a cellular structure consisting of glass particles surrounded by glass elements that have entered into an acid-ion interaction with polyacrylic acid in a polymer matrix. GIC-4 and GIC-6 show the most …

Impact Of Sulfurization On Sputtered Bivo4 Thin Films, Shukur P. Gofurov, Dilbar T. Bozorova, Zuhra Ch, Kadirova, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The sulfurization method has been used to decrease the band gap of the BiVO₄ structure, reduce the recombination of electrons and holes, and increase the photoelectrochemical performance of this material. It has been observed that incorporation of sulfur into stoichiometric and V_rich BiVO₄ is variously affected changing of properties of the structure. Sulfurization can modify V_rich BiVO₄ structure rather than stoichiometric BiVO₄.

Development Of Clinker And Portland Cement Composition Based On Surkhondaryo Raw Materials, Salohiddin Ramazanov, Abdumalik Nabiyev, Mastura Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this research work is to develop clinker and Portland cement compositions based on Surkhandarya raw materials for the planned construction of a cement plant, as well as to study their physical and chemical properties. The compositions of clinkers, including limestone, clay from the Yolgizbulok deposit and slag from the Almalyk mining and metallurgical plant, were studied. The optimal clinker composition was selected, on the basis of which Portland cement was obtained. The optimal amount of gypsum addition was determined to achieve a cement stone strength of 43,5 MPa. The developed clinker composition will provide the planned enterprise …

Antibacterial Cerium-Containing Glazes For Ceramic Tiles, Ivan Levitskiy, Mastura Aripova, Mihail Dyadenko, Dar’Ya Kucherova, Artem Golub

CHEMISTRY AND CHEMICAL ENGINEERING

The results of research on the production of semi-fritted cerium-containing glazes used for ceramic tiles are presented.

A multicomponent raw material mixture based on dolomite, cerium dioxide CeO₂, aluminosilicate multicalcium frit and permanent components including feldspar, alumina and clay components (kaolin and refractory clay) is used to produce glazes.

The characteristics of the obtained coatings were studied: appearance, technological and physico-chemical properties, including antibacterial properties in relation to the strains of Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538. The influence of temperature parameters on the formation of glaze coatings, as well as their structure and phase …

Synthesis Of Aromatic Acetylene Alcohols Based On Benzaldehyde And Its Halogenated Products, Sanat Samatov, Abduvakhab Ikramov, Saida Abdurakhmanova, Odiljon Ziyadullayev, Guzal Otamukhamedova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this study is to synthesize the corresponding aromatic acetylenic alcohols by alkylation with phenylacetylene in a complex catalytic system based on Zn(OTf)₂ and TBAF·3H₂O for the first time with benzaldehyde and some of its halogen derivatives. The selectivity and stability of catalysts used for the yields of reactions for the synthesis of aromatic acetylene alcohols were analyzed. The effect of benzaldehyde and its halogenated derivatives on the product yield was analyzed. The nature, structure, isomerism, spatial structure and other properties influenced to this reactions were studied. Some features of reactions of synthesis of aromatic …

Study Of Sorption Of Some Metal Ions By The Obtained Phosphoric Acid Cation Exchanger Of Polycondensation Type, Malika Berdieva, Rano Nazirova, Alisher Yuldashev, Umida Sharipova, Dilmurod Azimov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to investigate the sorption of Cu²⁺, Co²⁺, Ni²⁺, UO₂²⁺ ions, etc. depending on the ionic form of the cationite and the pH of the medium on phosphoric acid cationite obtained by forsforylation of a polymer based on cubic waste of the Shurtan gas-chemical complex and a secondary product of the hydrolysis industry – furfural. It was found that copper and UO₂²⁺ ions are best sorbed by cationite when the cationite is in Na form. The UO₂²⁺ ion is sorbed fairly well in …

Thermal Properties Of Polyelectrolyte Complexes Of Bombyx Mori Chitosan With Collagen, Shuhrat Khudoyberdiev, Noira Vokhidova, Mukhitdin Abdurazakov, Sayora Rashidova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work was to study the thermal behavior of the polyelectrolyte complexes of Bombyx mori ChS with collagen. As a result of the studies, the thermal properties of polyelectrolyte complexes based on Bombyx mori chitosan with collagen in wt. rel. 1:0,1 and 1:0,2 respectively. It has been determined that the most significant weight changes for chitosan with a molecular weight of 15×10³ and the degree of deacetylation of 85% occur at a temperature is 270 °C, when the mass loss rate reaches its maximum value. For collagen, the same temperature is 277 °C. For complexes ChS/collagen …

Glass Micro-Beads For Road Markings On The Basis Of Local Raw Materials, Farrukh Erkinov, Mastura Aripova, Jae-Shin Lee

CHEMISTRY AND CHEMICAL ENGINEERING

One of the priorities for the development of chemical and technological processes in the field of road-building materials and their quality is the production of materials for road markup based on glass micro-beads.

The use of glass micro-beads ensures the required retro-reflection of road marking and indicators of resistance to external influences, compliance with the requirements of regulatory documents. Therefore, the task of developing research approaches to develop a composition and control of road marking, which provide high performance and reduce accidents is an urgent problem.

For this purpose, on the basis of local raw materials, the theoretical foundations of …

Research Of The Process Of Obtaining Crystalline Monocalcium Phosphate Based On Extraction Phosphoric Acid From Phosphorites Of Central Kyzylkums, Kholtura Mirzakulov, Gavkhar Melikulova, Mohichehra Shaymardanova, Sherzod Khujamberdiev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to establish the optimal parameters of the technological process for the production of feed, crystalline monocalcium phosphate based on defluorinated and desulphated extraction phosphoric acid obtained from phosphorites of the Central Kyzylkum and limestone.

The influence of technological parameters, such as the norms and concentration of phosphoric acid, the process temperature on the filtration rate indicators, the rheological properties of the suspension and the mother liquor, as well as the dependence of the change in the commercial property of crystalline feed monocalcium phosphate, were studied.

It is shown that, regardless of the initial acid …

Investigations Of Roasting Process And Fractional Composition Of Zinc Concentrate Of Khandiza Deposit, Jasur Makhmayorov, Zafar Khakimov, Bakhrom Makhkamov, Murodjon Samadiy

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to study the effect of the process of calcining zinc concentrate from the Khandiza deposit on the degree of zinc extraction and fractional composition. For this, the chemical composition of the concentrate was established and it was shown that the main components are zinc, silicon, potassium, calcium, iron, copper, cadmium, and lead. Titanium, manganese, cobalt, and molybdenum are also contained in small amounts.

Extraction of zinc from a concentrate, calcined at 900 °C for 90 minutes with sulfuric acid with concentration of 18-25% in an autoclave at a temperature of 75 °C, a ratio …

Technology For Producing Alumosilicate Refractory Products Based On Non-Traditional Raw Materials Of Uzbekistan, Ripsime Mkrtchyan

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to develop a technology for producing aluminosilicate refractory products based on non-traditional raw materials - clay shale from the Jerdanak deposit and quartz-pyrophyllite rock from the Boynaksai deposit. The characteristics of prototypes of refractory materials were studied at different ratios of chamotte and binder. Quartz-pyrophyllite rock in its natural state and clay shale after firing at a relatively low temperature (1000 °C) were used as fireclay. The phase composition of the obtained materials was studied by X-ray diffraction and their fine structure by electron microscopy. Technological schemes for obtaining refractory products based on clay …

Study Of Various Quality Characteristics Of Polyester Fibers Obtained On The Basis Of Primary And Secondary Polyethylene Terephthalate, Samida Ernzarova, Asror Juraev, Muzaffar Alimukhamedov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of pre-oriented yarns (POY) threads has been carried out. The technological, physicomechanical properties, as well as the structure of the primary and secondary polyethylene terephthalate used in the production of the threads have been studied. The structure and properties of polyethylene terephthalate changed: the properties were worse, the structure were amorphous, the molecular weight decreased. The structure of recycled polyethylene terephthalate changed as a result of technological conversions in …

Мulti-Layer Fibrous Material Based On Textile Waste, Sevara Alimkhanova, Nodir Mirzaev, Adham Rafikov

CHEMISTRY AND CHEMICAL ENGINEERING

At the textile and sewing and knitting enterprises of the Republic of Uzbekistan, the number of which increases every year, a sufficient amount of technological waste is accumulated, which formed in the processes of sizing yarn, starting and setting up equipment, designing and sewing products. Meanwhile, there is a shortage of warm, comfortable, light, soft lining materials for clothes and shoes based on natural raw materials. With the purpose of rational use of textile waste - shredded, disheveled scraps of fabric and knitwear, a multilayer nonwoven material for details of clothing and footwear has been obtained. The material formed by …

Spectral Features And Hydrogen Bond Structure Of Aqueous Solutions Of Ethanol, Dilbar Bozorova, Shukur Gofurov, Mavlonbek Ziyayev, Abdulmutallib Kokhkharov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is develop an approach that makes it possible to study the spectral properties and structure of intermolecular hydrogen bonds in aqueous solutions of ethanol formed in systems whose existence in a gaseous medium or an isolated state is practically impossible. This approach bases on the combined use of infrared spectroscopy and molecular dynamics (MD) methods. An analysis give the structural reorganization of water molecules depending on the concentration of ethanol alcohol. It has been shown that the method of molecular dynamics with classical force fields makes it possible to explicitly take into account the molecules …

Determination Of The Stability Of Complex Compounds Of Copper (Ii), Zinc (Ii), Cadmium (Ii) And Silver (I) With Covalently Immobilized Sulfur Contain Ligands, Sherzod Kasimov, Khayit Turaev, Abdulakhat Jalilov, Farkhod Narmuratov, Zulkhumor Jumayeva

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is to determine the stability of the obtained coordination compounds of some d-metals with covalent immobilized sulfur-containing ligands. To achieve this goal, coordination compounds of copper (II), zinc (II), cadmium (II) and silver (I) ions with covalent immobilized sulfur-containing ligands - О,О-di- (2-aminoethyl) -dithiophosphate potassium - polyester matrix (KD2AEDTP-PEM), O,O-di- (2-aminoethyl) -dithiophosphate potassium - carbamide-formaldehyde matrix (KD2AEDTP-KFM). Studies were carried out to determine the acid-base properties of covalent-immobilized sulfur-containing ligands - KD2AEDTP-PEM, KD2AEDTP-KFM and the concentration stability of the obtained coordination compounds with ions of copper (II), zinc (II), cadmium (II), and silver (I). Based …

Synthesis And Spectroscopic Study Of Complex Compounds Mn(Ii), Co(Ii), Cu(Ii) And Zn With 5-Amino-2-Mercaptobenzimidazole, Lobar Gapurova, Dilnoza Rakhmonova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the effect of the nature of electron-donor and electron-withdrawing substituents in the molecules of heterocyclic ligands, the nature of acidoligands and transition metal ions on the properties of the synthesized coordination compounds. A method for the synthesis of new complex compounds of Mn (II), Cо (II), Cu (II) and Zn with 5-amino-2-mercaptobenzimidazole has been developed and the composition and structure of the synthesized complex compounds have been studied using modern physicochemical methods, such as elemental, thermogravimetric, X-ray phase analysis and IR spectroscopy. Coordination competing donor centers, electronic and geometric structures of the …

Resistance Of Polystyrol Concrete To Dynamic Impact Loads, Natalya Dubovitskaya, Zamira Mukhamedbaeva, Abduvali Mukhamedbaev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to increase the resistance of polystyrene concrete obtained from recycled polystyrene to dynamic shock loads. The issues of resistance of polystyrene concrete to compression forces with increasing load are considered. It was found that in terms of impact resistance, polystyrene concrete can be classified as a viscous material capable of absorbing high energy of shock loads. It has been determined that when Na₂SO₄ is introduced as a hardening accelerator, polystyrene concrete samples can absorb an impact energy of more than 178.5 J.

Features Of The Formation Of The Coating Structure On Titanium-Based Alloys, Uchkun Rakhimov, Nasiba Abduraimova, Yulbarskhon Mansurov

CHEMISTRY AND CHEMICAL ENGINEERING

Previously shown that coatings formed on titanium by plasma electrolytic oxidation (PEO) in an electrolyte with zirconium sulfate Zr(SO₄)₂ consisted of ZrO₂ and TiO₂ oxides, their surface layer is enriched with zirconium, they have good protective properties in chlorine-containing media. The resulting layers have a fairly regular distribution of relatively small pores, with a diameter of about 1 μm or less, on the surface. The composition and structure of PEO layers depend on both the composition of the electrolyte and the modes of formation. It is of scientific and practical interest to elucidate the effect …

Development Of The Composition Of A Composite Material Based On Thermoreactive Binder Ed-20, Umida Ziyamukhamedova, Gavhar Miradullayeva, Erkin Rakhmatov, Jasur Nafasov, Mavtuna Inogamova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective coatings for sheet and complex-configuration technological equipment, taking into account their rheological properties. Compositions of composite polymer materials based on a thermosetting binder of epoxy-diane resin ED-20 filled with a mineral filler - kaolin modified with gassipol resin (GS) - were developed using Newton's interpolation formula and the Lagrange method. The optimal amount of gossypol resin determined in the composition of the composite – in the amount …

Effect Of Talc On The Properties Of A Compound Based On Ethylene-Propylene Copolymer, Ikromjon Usmanov, Farrukh Kurbanbekov, Bobir Aykhodjaev, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the future, these compounds are used for the manufacture of plastic car parts. A block copolymer produced by Uz Kor Gaz Chemical was chosen as a binder. For this, the influence of the content and type of talc on the properties of a compound based on an ethylene-propylene copolymer was studied.

The properties of the obtained compounds checked using ISO standards. The fractional composition of the studied …

Physical And Chemical Studies Of Overroof Rocks Of Clay Shales Of The Dzherdanak Deposit, Mastura Aripova, Ivan Levitskiy, Khabiba Khamidova, Odelbek Ammanov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is study of the physical and chemical properties of the overburden of the Dzherdanak deposit. The chemical and mineralogical composition of the overburden of the Djerdanak deposit has been studied by the methods of X-ray and thermography, electron microscopy and infrared spectroscopy. The main phases are quartz, kaolinite and muscovite. The study of the fine structure of the rock under an electron microscope showed the homogeneity of the rock with pronounced uniform inclusions, which is preserved even after firing. Changes in the rock after firing at 1050 °C have been determined. The formation of mullite …