Materials Science and Engineering Commons^™

Core-Shell Copper And Nickel Nanofoam: Uniform Electroplating And Properties, Hassan Zbib, David Bahr

The Summer Undergraduate Research Fellowship (SURF) Symposium

Characterizing materials on the nanoscale is a key factor to enhance nanotechnology in diverse applications, ranging from electronics to energy fields. However, controlling the structure of the material at the nanoscale or mimicking the nanoscale features of a structure that already exists requires linking processing conditions to the nanostructure. This work focuses on solids that show porous patterns at the nano-micro scale; these are often called cellular solids and classified into two categories: honeycombs and foams. This study focuses on nanofoams; with ligament dimensions in the sub-micron scale. Electrospinning has been developed to produce nanofoam structures of polymers with controlled …

Structure-Force Field Generator For Molecular Dynamics Simulations, Carlos M. Patiño, Lorena Alzate, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Atomistic and molecular simulations have become an important research field due to the progress made in computer performance and the necessity of new and improved materials. Despite this, first principle simulations of large molecules are still not possible because the high computational time and resources required. Other methods, such as molecular dynamics, allow the simplification of calculations by defining energy terms to describe multiple atom interactions without compromising accuracy significantly. A group of these energy terms is called a force field, and each force field has its own descriptions and parameters. The objective of this project was to develop a …

Cylindrical Shell Based Phase Transforming Cellular Materials: Designing A Recoverable Energy Dissipating Material, Gordon F. Jarrold, David Restrepo, Nilesh Mankame, Pablo Zavattieri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Energy dissipating materials are used in a variety of impact events to protect more important parts of a system; one example of this is a football player’s helmet protecting a brain. A major drawback to classic energy dissipating materials however is that they dissipate energy through plastic deformation, meaning that after a single use, permanent deformations will prevent the material from being reusable to the same capacity as initially. We have designed a 1D cellular material in which geometric phase transformations in cylindrical shell elements are the primary energy dissipating mechanism, allowing for recoverability after use while keeping high energy …

Effect Of Particle Interactions On Powder Flow Behavior, Ivana A. Penagos, Carolina P. Mora, Teresa Carvajal

The Summer Undergraduate Research Fellowship (SURF) Symposium

The study of powder flow behavior is essential for the development of processing technologies in many industries. In fact, powders have a major function in diverse types of manufacturing, such as pharmaceuticals, foods, chemicals, materials, minerals and cosmetics. This leads to an increasing demand for the development of reliable methods to assess powder flow problems in industry. This research intends to provide a general insight into how surface interactions and particle properties may alter powder flowability. The materials used for this study were lactose, starch, milk powder, cocoa and chocolate. These vary in their interparticle forces as well as on …

Atomistic Simulations Of Novel Nanoscale Semiconductor Devices: Resistance Switches And Two-Dimensional Transistors, Joseph P. Anderson, Mahbubul Islam, David Guzman, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

As transistors get smaller, we are achieving record levels of memory density. However, there is a limit to how small transistors can be made before their functionality breaks down. Thus alternatives to traditional transistor technology are needed. The two such technologies we examined are: resistance switching devices, which reversibly grow metal filaments through a dielectric, and two-dimensional transistors, which are capable of breaking through the scalability limit of traditional transistors. In order to design resistance switching devices which create filaments with some level of consistency, the dynamics of the filament formation need to be explored. Herein we model this process …

Study Of Persistent Slip Bands Formed By Low Cycle Fatigue On Nickel-Based Superalloys At Room Temperature, Anjola Uprety, Sae Matsunaga, Michael S. Titus Dr., Michael D. Sangid Dr., Alberto W. Mello Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

The ability of Ni-based superalloys to withstand temperatures in excess of 1100⁰C makes them useful for applications in the hottest components in jet engines, gas turbines, and thrust engines. Increasing the efficiency of these gas turbine engines helps to reduce the fossil fuel consumption and the production of greenhouse gasses. A common mode of failure in these Ni-based superalloys is low cycle fatigue, in which narrow regions of high dislocation density, which are known as persistent slip bands (PSBs), can develop and lead to crack initiation. A detailed understanding of the formation and structure of PSBs has eluded …

Comparison Of Pm-Hip To Cast Alloy 625 For Nuclear Applications, Alexander L. Bullens, Keyou Mao, Janelle P. Wharry, Esteban Bautista

The Summer Undergraduate Research Fellowship (SURF) Symposium

PM-HIP, or Powder Metallurgy and Hot Isostatic Pressing, metals have been a low cost alternative to forged and cast structural metals within various industries. The nuclear industry has recently developed interest in PM-HIP alloys, but further research needs to be done to quantify their mechanical properties and characterize the microstructure. Specifically, we must understand the mechanical and microstructural evolution of PM-HIP materials after long-term operation at the elevated temperatures that PM-HIP components will experience in service. We focus on Ni-base alloy Inconel 625, and compare the PM-HIP version to the cast version. Our methodology consists of annealing samples to various …

Improving Methods Of Doping On Black Phosphorus, Yuqin Duan, Adam Charnas, Jingkai Qin, Peide Ye

The Summer Undergraduate Research Fellowship (SURF) Symposium

Black phosphorus (BP) is a 2D semiconducting material with high carrier mobility. It is usually p-type due to oxidation states near its valence band. Although achieved through other growth methods, n-type doping has not yet been accomplished through the modern chemical vapor transport (CVT) growth method. To address this issue, small amounts of tellurium were added to Red Phosphorus to act as a dopant during the CVT growth process in addition to tin(Sn) and tin(IV) iodide, which facilitate growth. The chemicals are heated up to 600°C and precisely cooled in a 21-hour process, during which BP crystals should form. After …

Passive Thermal Management Using Phase Change Materials, Yash Yogesh Ganatra

Open Access Theses

The trend of enhanced functionality and reducing thickness of mobile devices has led to a rapid increase in power density and a potential thermal bottleneck since thermal limits of components remain unchanged. Active cooling mechanisms are not feasible due to size, weight and cost constraints. This work explores the feasibility of a passive cooling system based on Phase Change Materials (PCMs) for thermal management of mobile devices. PCMs stabilize temperatures due to the latent heat of phase change thus increasing the operating time of the device before threshold temperatures are exceeded. The primary contribution of this work is the identification …

Size Scaling Of Strength And Toughness For 3d Printed Polymer Specimens, Darren Thomas Bell

Open Access Theses

To find material systems that offer low density and high strength, stiffness or toughness, hierarchically designed material systems have provided a promising research area. This thesis lays the groundwork for designing efficient micro-architectured material systems by characterizing size effects for 3d printed polymer parts. Two methods were used to analyze data from 3-point bend tests for specimens of varying size: the load-separation method was used for finding the point of crack growth initiation and Bazant’s method was used to find shape independent strength at failure. The strength values were used as inputs for finding size independent material constants within a …

Mechanism Of Shot Peening Enhancement For The Fatigue Performance Of Aa7050-T7451, Daniel James Chadwick

Open Access Theses

Shot peening is a dynamic cold working process involving the impingement of peening media onto a substrate surface. Shot peening is commonly employed as a surface treatment technique within the aerospace industry during manufacturing, in order to improve fatigue performance of structural components. The compressive residual stress induced during shot peening is understood to result in fatigue crack growth retardation, improving the performance of shot peened components. However, shot peening is a compromise between the benefit of inducing a compressive residual stress and causing detrimental surface damage. Due to the relatively soft nature of AA7050-T7451, shot peening can result in …

Design Of Nitroxide-Based Radical Polymer Materials For Electronic Applications, Martha E. Hay

Open Access Theses

Radical polymers represent a new class of organic electronic materials that rely on an oxidation-reduction (redox) reaction to transport charge. That is, stable radical sites pendant to the polymer backbone communicate electronically through a rapid oxidation-reduction reaction. This redox mechanism has previously been established as effective for charge-storage applications (e.g., secondary batteries). When applied in the solid state, radical polymers demonstrate electrical conductivity on par with that of first-generation conjugated polymer electronic materials. This initial success has prompted interest in developing design rules for radical polymers. Specifically, this thesis explores the impact of radical density in a polymer …

Degradation Of High Performance Polymeric Fibers: Effects Of Sonication, Humidity And Temperature On Poly (P-Phenylene Terephthalamide) Fibers, Nelyan Lopez-Perez

Open Access Theses

High performance fibers are characterized by properties such as high strength and resistance to chemicals and heat. Due to their outstanding properties, they are used on applications under harsh environments that can degrade and decrease their performance. Fiber degradation due to different chemical and mechanical factors, is a process that begins at a microstructural level. Changes in the polymer’s chemical or physical structure can alter their mechanical properties. Knowledge of the structure-properties relationship and the effects of environmental chemical and physical factors over time, is crucial for the improvement and development of high performance fibers.

In this study ballistic fibers …

Linking Nanoscale Mechanical Behavior To Bulk Physical Properties And Phenomena Of Energetic Materials, Matthew R. Taw

Open Access Theses

The hardness and reduced modulus of aspirin, RDX, HMX, TATB, FOX-7, ADAAF, and TNT/CL-20 were experimentally measured with nanoindentation. These values are reported for the first time using as-received micron sized crystals of energetic materials with no additional mechanical processing. The results for TATB, ADAAF, and TNT/CL-20 are the first of their kind, while comparisons to previous nanoindentation studies on large, carefully grown single crystals of the other energetic materials show that mechanical properties of the larger crystals are comparable to crystals in the condition they are practically used. Measurements on aspirin demonstrate the variation that can occur between nanoindentation …

The Influence Of Alkalinity Of Portland Cement On The Absorption Characteristics Of Superabsorbent Polymers (Sap) For Use In Internally Cured Concrete, Juan D. Tabares Tamayo

Open Access Theses

The concrete industry increasingly emphasizes advances in novel materials that promote construction of more resilient infrastructure. Due to its potential to improve concrete durability, internal curing (IC) of concrete by means of superabsorbent polymers (SAP) has been identified as one of the most promising technologies of the 21st century. The addition of superabsorbent polymers into a cementitious system promotes further hydration of cement by providing internal moisture during the hardening and strength development periods, and thus limits self-desiccation, shrinkage, and cracking.

This thesis presents the work performed on the series of cement pastes with varying alkalinity of their pore solutions …

Thermomechanical Properties Of Novel Lanthanum Zirconate Based Thermal Barrier Coatings - An Integrated Experimental And Modeling Study, Xingye Guo

Open Access Dissertations

Thermal barrier coatings (TBCs) are refractory materials deposited on gas turbine components, which provide thermal protection for metallic components at operating conditions. The current state-of-art TBC material is yttria-stabilized zirconia (YSZ), whose service temperature is limited to 1200 celsius, due to sintering and phase transition at higher temperatures. In comparison, lanthanum zirconate (La2Zr2O7, LZ) has become a promising candidate material for TBCs due to its lower thermal conductivity and higher phase stability compared to YSZ.

The primary objective of this thesis is to design a novel robust LZ-based TBC system suitable for applications beyond 1200 celsius. Due to LZ’s low …

Plasmonic Devices Based On Transparent Conducting Oxides For Near Infrared Applications, Kim Jongbum

Open Access Dissertations

In the past decade, there have been many breakthroughs in the field of plasmonics and nanophotonics that have enabled optical devices with unprecedented functionalities. Even though remarkable demonstration of at photonic devices has been reported, constituent materials are limited to the noble metals such as gold (Au) and silver (Ag) due to their abundance of free electrons which enable the support of plasmon resonances in the visible range. With the strong demand for extension of the optical range of plasmonic applications, it is now a necessity to explore and develop alternative materials which can overcome intrinsic issues of noble metals …

Energy Localization And Heat Generation In Composite Energetic Systems Under High-Frequency Mechanical Excitation, Jesus O. Mares

Open Access Dissertations

In this work, the ability to use high frequency mechanical excitation to generate significant heating within plastic bonded explosives, as well as single energetic particles embedded within a viscoelastic binder, is studied. In this work, the fundamental mechanisms associated with the conversion of high-frequency mechanical excitation to heat as applied to these composite energetic systems are thoroughly investigated.

High-frequency contact excitation has been used to generate a significant amount of heat within samples of PBX 9501 and representative inert mock materials. Surface temperature rises on the order of 10 °C were observed at certain frequencies over a range from 50 …

Bridge Maintenance To Enhance Corrosion Resistance And Performance Of Steel Girder Bridges, Luis M. Moran Yanez

Open Access Dissertations

The integrity and efficiency of any national highway system relies on the condition of the various components. Bridges are fundamental elements of a highway system, representing an important investment and a strategic link that facilitates the transport of persons and goods. The cost to rehabilitate or replace a highway bridge represents an important expenditure to the owner, who needs to evaluate the correct time to assume that cost. Among the several factors that affect the condition of steel highway bridges, corrosion is identified as the main problem. In the USA corrosion is the primary cause of structurally deficient steel bridges. …

Microstructural Evolution During The Homogenization Heat Treatment Of 6xxx And 7xxx Aluminum Alloys, Pikee Priya

Open Access Dissertations

Homogenization heat treatment of as-cast billets is an important step in the processing of aluminum extrusions. Microstructural evolution during homogenization involves elimination of the eutectic morphology by spheroidisation of the interdendritic phases, minimization of the microsegregation across the grains through diffusion, dissolution of the low-melting phases, which enhances the surface finish of the extrusions, and precipitation of nano-sized dispersoids (for Cr-, Zr-, Mn-, Sc-containing alloys), which inhibit grain boundary motion to prevent recrystallization. Post-homogenization cooling reprecipitates some of the phases, changing the flow stress required for subsequent extrusion. These precipitates, however, are deleterious for the mechanical properties of the alloy …

Effect Of Preparation Technology On Arc Erosion Resistance Of Mgo/Cu Contact Materials, Xiuhua Guo, Kexing Song, Yanmin Zhang, Xuebin Zhang, Jianxin Gao

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Thermodynamic Calculation Of The Liquidus Surface Projection Of Multi-Component Aluminum Alloys, Jingrui Zhao, Yong Du, Lijun Zhang, Jixue Zhou, Yuansheng Yang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

A356 Aluminum Alloy, Grain Refining, Modification, Microstructure, Mechanical Properties, Jonghun Yoon

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

A Molecular Dynamics Study Of Activated Tungsten Inert Gas Welding Process, Cheng Jin, Hanchen Huang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Effect Of Thickness Of Anode Functional Layer On Electrochemical Performance Of Ni-Ce0.8gd0.2o1.9 Anode-Supported Solid Oxide Fuel Cells, Xueping Guo, Kaiping Peng, Chan Zheng, Wei Li, Wenzhe Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Impact And Friction Properties Of Za45si3cu Alloy, Weihe Shi

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Modelling The Evaporation Of Aluminum In Ti–6al–4v Alloy Melted With Electron Beam And Laser, Xuan Wang, Liang Wang, Liang S. Luo, Yan Q. Su, Xin Z. Li, Rui R. Chen, Jing J. Guo, Heng Z. Fu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On Criterion Of Fabricating Columnar Dendrite Structure Dz466 Superalloy Based On Lmc Process, Xun Sun

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Experimental Investigation On Recovery Of Fe-Ni Alloy From Bayer Red Mud And Laterite Nickel, Aoping He, Chen Liu, Jianmin Zeng

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Microstructures And Properties Of Sintered Cu–Mos2/Cu Functional Gradient Materials, Aiqin Wang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.