Materials Science and Engineering Commons^™

Interfacial Rheological Mechanics Of A Non-Ionic, Tri-Block Copolymer At Water/Hexadecane Interface, Jerome J. Nash, Kendra Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Growing interest on the stability of foams and emulsions has lead to concentrated research of interfacial rheology. The response of an interfacial layer to mechanical deformation in size and shape is dependent on its composition. [Miller 2010] This research analysis focused on the adsorption and rheological mechanics of the non-ionic, tri-block copolymer, Pluronic 17R4 at the water/hexadecane interface. The adsorption and viscoelastic properties of the interface were measured via methods of pendant drop tensiometry and dynamic oscillation with drop shape analysis software. Interfacial tension measurements were taken to study the surface pressures of Pluronic 17R4 solutions with concentrations ranging from …

Stanford Stratified Structure Solver (S4) Simulation Tool, Chang Liu, Xufeng Wang, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Stanford Stratified Structure Solver (S4) developed in 2012 allows for fast, accurate prediction of optical propagation through complex 3D structures. However, there have been two key challenges preventing wider use to date: the use of a specialized control language, and the difficulty of incorporating realistic materials parameters. In this project, both concerns have been addressed. We have constructed a graphical user interface as an alternative, using the open-source Rappture platform on nanoHUB. This has been combined with a comprehensive materials database known as PhotonicsDB, which incorporates materials optical data drawn from carefully vetted sources. An Octave script file was …

Assessing The Mvs Model For Nanotransistors, Siyang Liu, Xingshu Sun, Mark S. Lundstrom

The Summer Undergraduate Research Fellowship (SURF) Symposium

A simple semi-empirical compact MOSFET model has been developed, which is called MIT virtual source (MVS) model. Compare to other model used in industry, MVS model requires only a few parameters, most of which can be directly obtained from experiment, and produce accurate results. One aim of this paper is to test the applicability of the MVS model to transistor made from MoS₂ rather than silicon. Another target is to determine the sustainability of the MVS model under different transistor tests. To achieve these goals, the MVS model will be used to fit the experimental data on MoS_{2 …}

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Validation Of Long-Fiber Thermoplastic Composite Models, Christian A. Vuong, Megan Kinney, Michael Sangid

The Summer Undergraduate Research Fellowship (SURF) Symposium

With increased pressure to reduce energy consumption, long-fiber reinforced thermoplastic composites (LFTs) are of interest to aerospace and automotive industries due to their light weight in combination with other desirable mechanical properties and ease of manufacturing to replace common materials such as aluminum and magnesium. However, the performance of LFTs is highly dependent on microstructural variables such as fiber length and orientation, which are heavily influenced by the manufacturing process. Accurately predicting these factors would allow for more rapid advances in LFTs by reducing the experiments needed for certification and decreasing expenses. While models that serve this purpose exist, the …

Pulsed Laser Coating Of Bioceramic (Hap) And Niti Nanoparticles On Metallic Implants, Aayush Goswami, Gary J. Cheng

The Summer Undergraduate Research Fellowship (SURF) Symposium

This research deals with increasing the biocompatibility of the bio implants which have a global market valued more than $94.1 billion . The surface of the metal alloys used for the bone implants need to be coated with bio compatible materials like HAp(Hydroxyapatite), graphene, etc. in order to promote the growth of cells(osteoblasts) on the surface of the implants. Various techniques like plasma spray coating, ion beam sputter coating, etc. have been used before to coat such materials on a substrate, however these have faced problems of coating quality. In order to perfect this coating, that is make it more …

Computation Of Piezo-Electric Materials, Seung Yun Song, R. Edwin García

The Summer Undergraduate Research Fellowship (SURF) Symposium

Piezo -electric materials are materials that will change its shape and size when an electric field is applied to the material. Vice versa, these materials will generate a certain voltage when they are bent, vibrated, or deformed. These materials show promising future , because they link mechanical and electrical properties of a material. In 21^st century when electronic devices such as smart phones or touch-screen TV’s depend highly on mechanical input such as human’s touch, developing and researching materials that can link the mechanical and electrical properties can greatly improve the quality of i-phones. The main challenge regarding piezo-electric …

Insights Into The Effect Of Geometrical Parameters In The Mechanical Properties Of The Radular Teeth Of The Cryptochiton Stelleri – A 3d Print Approach, Chan Jeong, Enrique Escobar, Pablo Zavattieri Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Cryptochiton Stelleri is known to have ultra-hard radular teeth that have one of the largest hardness (9-12GPa) and stiffness (90-125GPa) among other biological materials such as Enamel and Abalone shell. The ultrastructure of the teeth is formed by a bundle of highly mineralized rods composed of iron oxides and organic material. The main method to measure the material properties has been through nanoindentation. However there are limitations to nanoindentation of the Chiton’s teeth such as limited equipment, costly and time consuming preparation of the samples, and observation of nanoscale features being difficult. In this work, the rod-like microstructure of …

Iron-Magnesium Alloy Bioabsorbable Blood Stent, Kaitlyn Jarry, L Stanciu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bioabsorbable materials are fairly new and proper alloys for implantation in the body have not yet been established. There are a few polymers that have showed promise, but they do not provide the proper mechanical support that metal does. These materials would be used to create devices such as blood stents and orthopedic screws. Investigation into the properties of different alloys can help to establish a material that can be used for implanted devices that are only needed for a limited amount of time. In order to investigate these alloys many different experiments will to be run to test the …

Python-Based Simulation Tool For Kinetic Monte Carlo, Zaiwei Zhang, R. Edwin García

The Summer Undergraduate Research Fellowship (SURF) Symposium

Simulation tools are highly needed for testing or designing nanotechnology in university research projects.The problem in the current simulation tool used in our research, which is conducted by Prof.Garcia in MSE department at Purdue, is that users cannot observe the changing numbers of diffusivities during Vacancy Diffusion simulations between different materials. Also, there is no Graphic User Interface for the simulation tools.To solve the problem, the Virtual Kinetics of Materials Laboratory program is used to create the Graphic User Interface. Also, GTK+ toolkit has been used to create a pop-up window displaying updated diffusivities during the simulation. For user purpose, …

Electrochemical Sensing With Metal Oxides, Isabella Ramirez, Lia Stanciu, Alexandra Snyder

The Summer Undergraduate Research Fellowship (SURF) Symposium

The effective sensing of hydrogen peroxide is important for a variety of reasons. It can be utilized as a diagnostic tool for diseases like asthma; also, the sensing can be utilized in pharmaceutical and food production for quality control. The use of silver oxide nanoparticles with varying morphologies has not been investigated as a sensing agent for hydrogen peroxide in the past. The particles’ properties and ability to oxidize and reduce hydrogen peroxide suggest that they will be effective to create a sensitive sensor. The silver oxide particles were prepared through chemical reduction using varying molar ratios of reactants. The …

Use Of Oscillatory Shear To Study The Effect Of Limestone Filler On The Rheology Of Early-Age Portland Cement, Christopher W. Barney, Kendra Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cement is a material that has been in use since the ancient times and is the most widely manufactured material in industry today. During the production of cement, limestone undergoes a process called calcination which releases CO₂. In order to reduce the environmental impact and cost of cement production it has become standard practice to replace a portion of the cement mixture with ground limestone, but this causes a change in the rheological profile of the mixture. This change in rheology affects both the short and long term workability of the material. In this study, small amplitude oscillatory …

Modeling The Atomic And Electronic Structure Of Metal-Metal, Metal-Semiconductor And Semiconductor-Oxide Interfaces, Ganesh Krishna Hegde

Open Access Dissertations

The continuous downward scaling of electronic devices has renewed attention on the importance of the role of material interfaces in the functioning of key components in electronic technology in recent times. It has also brought into focus the utility of

atomistic modeling in providing insights from a materials design perspective. In this thesis, a combination of Semi Empirical Tight-Binding (TB), first-principles Density

Functional Theory and Reactive Molecular Dynamics (MD) modeling is used to study aspects of the electronic and atomic structure of three such 'canonical' material interfaces - Metal-Metal, Metal-Semiconductor and Semiconductor oxide interfaces.

An important contribution of this thesis …

Spectroscopic And Kinetic Characterization Of Catalytic Materials For The Conversion Of Biomass-Derived Compounds, Paul James Dietrich

Open Access Dissertations

As economies look to transition away from petroleum for social, economic, and political reasons, biomass will continue to attract attention as a renewable feedstock for the fuels and chemicals industry. In order to turn biomass into end use fuels and chemicals, the oxygen content must be lowered significantly, requiring large hydrogen inputs. For these processes to be completely renewable, the hydrogen must come from biomass or biomass-derived compounds. In this work, catalysts for the aqueous phase reforming (APR) of biomass-derived sugars were characterized by a combination of reaction kinetics, X-ray spectroscopy, electron microscopy, and theoretical computation to determine the active …

The Comparison Of Composite Aircraft Field Repair Method (Cafrm) With Traditional Aircraft Repair Technologies, Peng Hao Wang

Open Access Dissertations

In the aviation industry, manufacturers made the transition from aluminum to composite materials for the majority of their primary structures over the last few decades. While the design and manufacturing techniques have consistently evolved, field repair methods were consistently overlooked. In this study, specimens fabricated using some of the common repair methods such as the autoclave repair method, and Double Vacuum Debulk (DVD) repair method were tested against the Composite Aircraft Field Repair Method (CAFRM) proposed by the researcher. Specimens were tested with microscopy, acid digestion, short beam shear, and mode I fracture tests. The researcher was able to determine …

Synthesis Of Graphene Nanomaterials And Their Application In Electrochemical Energy Storage, Guoping Xiong

Open Access Dissertations

The need to store and use energy on diverse scales in a modern technological society necessitates the design of large and small energy systems, among which electrical energy storage systems such as batteries and capacitors have attracted much interest in the past several decades. Supercapacitors, also known as ultracapacitors, or electrochemical capacitors, with fast power delivery and long cycle life are complementing or even replacing batteries in many applications. The rapid development of miniaturized electronic devices has led to a growing need for rechargeable micro-power sources with high performance. Among different sources, electrochemical micro-capacitors or micro-supercapacitors provide higher power density …

Dynamic Behavior Of Sandwich Beams With Internal Resonators, Bhisham Nar Narain Sharma

Open Access Dissertations

Dynamic behavior of sandwich beams with internal resonators was investigated. The effect of inserting spring-mass resonators into the sandwich core was theoretically analyzed and it was shown that a wave attenuation bandgap exists due to local resonance. Steady state experiments were used to demonstrate such an attenuation bandgap. Frequency response functions were obtained for a beam with resonators and without resonators. It was shown that insertion of resonators into the core causes a wave attenuation bandgap to open up. The experimental results were verified using finite element simulations. Further experiments were carried out by tuning the resonators at 12 Hz …

Mechanisms Of Microstructure Formation Under The Influence Of Ultrasonic Vibrations, Milan Rakita

Open Access Dissertations

Positive effects of ultrasound on crystallization have been known for almost 90 years. Application of ultrasound has been very successful in many industries, most notably in chemistry, creating a new branch of science - sonochemistry. However, ultrasonication has not found wide commercial application in the solidification processing. The reason for that is the complexity of underlying phenomena and the lack of predicting models which correlate processing parameters with the properties of a product. The purpose of this study is to give some contribution toward better understanding of mechanisms that lead to changes in the solidifying microstructure. It has been found …

Utilizing Electron Microscopy And Spectroscopy Methods To Understand Water Structure And Water Doping, Lior Miller

Open Access Dissertations

Water is the second most common element in the universe and the most studied material on earth. Most of the studies concerning water are from the fields of chemistry and biology. Hence, the structure of water molecules and short range order and interactions are well characterized and understood. However, the collective arrangement of water molecules and the long range order are still missing. Understanding of this long range order in water is needed, as it is the key to many water activities.

To fill this gap, this study utilizes a new direct method for characterization of water in the vapor …

The Effect Of Composition On The Linear And Nonlinear Mechanical Properties Of Particulate Filled Elastomers, Oluwaseyi Ogebule

Open Access Dissertations

Engineering elastomers are materials capable of undergoing large deformation upon load application and recovering upon load removal. From car tires to building vibration isolator systems, elastomers are the most versatile of engineering materials. The inclusion of particulate fillers into elastomers enhances their mechanical properties (modulus, tensile strength, toughness, tear resistance, etc) thereby extending their applicability to more demanding functions. The automotive, healthcare, construction, adhesives and consumer products are some of the many industries that produce finished goods containing elastomeric parts.

Despite the various concepts on reinforcement in filled elastomers, a complete understanding of their linear viscoelastic properties and the nonlinear …

Response Of Plasma Facing Components In Tokamaks Due To Intense Energy Deposition Using Particle-In-Cell(Pic) Methods, Filippo Genco

Open Access Dissertations

Damage to plasma-facing components (PFC) due to various plasma instabilities is still a major concern for the successful development of fusion energy and represents a significant research obstacle in the community. It is of great importance to fully understand the behavior and lifetime expectancy of PFC under both low energy cycles during normal events and highly energetic events as disruptions, Edge-Localized Modes (ELM), Vertical Displacement Events (VDE), and Run-away electron (RE). The consequences of these high energetic dumps with energy fluxes ranging from 10 MJ/m2 up to 200 MJ/m2 applied in very short periods (0.1 to 5 ms) can be …

Solution To Certain Problems In The Failure Of Composite Structures, Jonathan Goodsell

Open Access Dissertations

The present work contains the solution of two problems in composite structures. In the first, an approximate elasticity solution for prediction of the displacement, stress and strain fields within the m-layer, symmetric and balanced angle-ply composite laminate of finite-width subjected anticlastic bending deformation is developed. The solution is shown to recover classical laminated plate theory predictions at interior regions of the laminate and thereby illustrates the boundary layer character of this interlaminar phenomenon. The results exhibit the anticipated response in congruence with the solutions for uniform axial extension and uniform temperature change, where divergence of the interlaminar shearing stress is …

Multiscale Modeling Of The Hierarchical Structure Of Cellulose Nanocrystals, Fernando Luis Dri

Open Access Dissertations

Cellulose constitutes the most abundant renewable polymeric resource available today. It considered an almost inexhaustible source of raw material, and holds great promise in meeting increasing demands for environmentally friendly and biocompatible products. Key future applications are currently under development for the automotive, aerospace and textile industries. When cellulose fibers are subjected to acid hydrolysis, the fibers yield rod-like, highly crystalline residues called cellulose nanocrystals (CNCs). These particles show remarkable mechanical and chemical properties (e.g. Young Modulus ~200 GPa) within the range of other synthetically-developed reinforcement materials. Critical to the design of these materials are fundamental material properties, many of …

Applicability Of Continuum Fracture Mechanics In Atomistic Systems, Shao-Huan Cheng

Open Access Dissertations

By quantitating the amplitude of the unbounded stress, the continuum fracture mechanics defines the stress intensity factor K to characterize the stress and displacement fields in the vicinity of the crack tip, thereby developing the relation between the stress singularity and surface energy (energy release rate G). This G-K relation, assigning physical meaning to the stress intensity factor, makes these two fracture parameters widely used in predicting the onset of crack propagation. However, due to the discrete nature of the atomistic structures without stress singularity, there might be discrepancy between the failure prediction and the reality of nanostructured materials. Defining …

Atomic Level Study Of Water-Gas Shift Catalysts Via Transmission Electron Microscopy And X-Ray Spectroscopy, Mehmed Cem Akatay

Open Access Dissertations

Water-gas shift (WGS), CO + H₂ O [Special characters omitted.] CO₂ + H₂ (ΔH° = -41 kJ mol ^-1 ), is an industrially important reaction for the production of high purity hydrogen. Commercial Cu/ZnO/Al₂ O₃ catalystsare employed to accelerate this reaction, yet these catalysts suffer from certain drawbacks, including costly regeneration processes and sulfur poisoning. Extensive research is focused on developing new catalysts to replace the current technology. Supported noble metals stand out as promising candidates, yet comprise intricate nanostructures complicating the understanding of their working mechanism.

In this study, the structure of the supported …

The Effects Of A Collaborative Problem-Based Learning Experience On Students’ Motivation In Engineering Capstone Courses, Brett D. Jones, Cory M. Epler, Parastou Mokri, Lauren H. Bryant, Marie C. Paretti

Interdisciplinary Journal of Problem-Based Learning

We identified and examined how the instructional elements of problem-based learning capstone engineering courses affected students’ motivation to engage in the courses. We employed a two-phase, sequential, explanatory, mixed methods research design. For the quantitative phase, 47 undergraduate students at a large public university completed a questionnaire that measured the components of the MUSIC Model of Academic Motivation (Jones, 2009): empowerment, usefulness, success, situational interest, individual interest, academic caring, and personal caring. For the qualitative phase that followed, 10 students answered questions related to the MUSIC components. We identified several instructional elements that led to motivating opportunities that affected students’ …

Microstructural Evolution During Stress Relaxation Of Gold Thin Films, Luthfia Amra Syarbaini

Open Access Theses

Microstructure evolution in metal thin films for use in microelectronic devices was studied due to the formation of defects such as whiskers and hillocks that may cause problems in electrical circuits. Thin film stress relaxation can occur through a variety of processes. Understanding such mechanisms and the conditions under which certain mechanism dominate can potentially lead to the improved control of thin film stability. Studies of the 3D microstructural changes in Au thin films on silicon and other substrates with different thermal expansion coefficients aid us in understanding thin film relaxation phenomena such as hillock/whisker formation. Techniques such as in-situ …

Accurate Prediction Of Spectral Phonon Relaxation Time And Thermal Conductivity Of Intrinsic And Perturbed Materials, Tianli Feng

Open Access Theses

The prediction of spectral phonon relaxation time, mean-free-path, and thermal conductivity can provide significant insights into the thermal conductivity of bulk and nanomaterials, which are important for thermal management and thermoelectric applications. We perform frequency-domain normal mode analysis (NMA) on pure bulk argon and pure bulk germanium. Spectral phonon properties, including the phonon dispersion, relaxation time, mean free path, and thermal conductivity of argon and germanium at different temperatures have been calculated. We find the dependence of phonon relaxation time τ on frequency ω and temperature T vary from ~ω^-1.3 to ~ω^-1.8 and ~T^-0.8 to ~T^{-1.8 …}

High Speed Turning Of Compacted Graphite Iron (Cgi) Using Controlled Modulation, Tyler Paul Stalbaum

Open Access Theses

Compacted graphite iron (CGI) is a material which emerged as a candidate material to replace cast iron (CI) in the automotive industry for engine block castings. Its thermal and mechanical properties allow the CGI-based engines to operate at higher cylinder pressures and temperatures than CI-based engines, allowing for lower fuel emissions and increased fuel economy. However, these same properties together with the thermomechanical wear mode in the CGI-CBN system result in poor machinability and inhibit CGI from seeing wide spread use in the automotive industry.

In industry, machining of CGI is done only at low speeds, less than V = …

Examining The Effects Of Computational Tools On Students' Conceptual Understanding Of Thermodynamics Of Material Concepts And Representations, Oyindamola Oluwatimi

Open Access Theses

Technology is becoming a more critical agent for supporting learning as well as research in science and engineering. In particular, technology-based tools in the form of simulations and virtual environments support learning using mathematical models and computational methods. The purpose of this research is to: (a) measure the value added in conveying Thermodynamics of materials concepts with a blended learning environment using computational simulation tools with lectures; and (b) characterize students' use of representational forms to convey their conceptual understanding of core concepts within a learning environment that blended Gibbs computational resource and traditional lectures.

A mix-method approach was implemented …