Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 661 - 690 of 2244

Full-Text Articles in Materials Science and Engineering

Mitigation Of Environmental Hazards Of Sulfide Mineral Flotation With An Insight Into Froth Stability And Flotation Performance, Muhammad Badar Hayat Jan 2018

Mitigation Of Environmental Hazards Of Sulfide Mineral Flotation With An Insight Into Froth Stability And Flotation Performance, Muhammad Badar Hayat

Doctoral Dissertations

"Today's major challenges facing the flotation of sulfide minerals involve constant variability in the ore composition; environmental concerns; water scarcity and inefficient plant performance. The present work addresses these challenges faced by the flotation process of complex sulfide ore of Mississippi Valley type with an insight into the froth stability and the flotation performance. The first project in this study was aimed at finding the optimum conditions for the bulk flotation of galena (PbS) and chalcopyrite (CuFeS₂) through Response Surface Methodology (RSM). In the second project, an attempt was made to replace toxic sodium cyanide (NaCN) with the biodegradable chitosan …

Go to article

Inorganic Biodegradable Substrates For Devices And Systems, Chang-Soo Kim, Richard K. Brow, D. E. Day Dec 2017

Inorganic Biodegradable Substrates For Devices And Systems, Chang-Soo Kim, Richard K. Brow, D. E. Day

Electrical and Computer Engineering Faculty Research & Creative Works

Disclosed are biodegradable glass substrates that are useful as functional elements of solid-state devices. In particular, biodegradable glass substrates having a rapidly degradable glass and a slowly degradable glass provide a structural platform that completely dissolves following a desired operational lifetime of devices such as implanted electronic devices, implanted sensor devices, and optical fibers.

Go to article

Factors Affecting The Evolution Of Inclusion Populations During Steelmaking And Casting Processes, Obinna Adaba, Laura Bartlett, Mingzhi Xu, Ronald J. O'Malley Dec 2017

Factors Affecting The Evolution Of Inclusion Populations During Steelmaking And Casting Processes, Obinna Adaba, Laura Bartlett, Mingzhi Xu, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Investigations into the evolution of inclusion populations during ladle processing and continuous casting are reviewed. Details of the steelmaking practices employed in BOP and EAF steelmaking have been observed to have a strong influence on the size distribution, quantity, composition, phases and morphology of the final inclusion population delivered to the caster. Examples of the effects of different processing paths on the evolution of inclusion populations are presented. The importance of preexisting inclusion populations on the formation and removal of new inclusion populations is also reviewed and discussed.

Go to article

Investigation On Ti6al4v-V-Cr-Fe-Ss316 Multi-Layers Metallic Structure Fabricated By Laser 3d Printing, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer Dec 2017

Investigation On Ti6al4v-V-Cr-Fe-Ss316 Multi-Layers Metallic Structure Fabricated By Laser 3d Printing, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Joining titanium alloy and stainless steel is becoming an urgent need since their outstanding mechanical properties can be utilized integratedly. However, direct fusion joining of Ti6Al4V to SS316 can cause brittle Ti-Fe intermetallics which compromise join bonds’ mechanical properties. In this research, Laser 3D Printing was applied to explore a new Ti6Al4V to SS316 multi-metallic structure. A novel filler transition route was introduced (Ti6Al4V → V → Cr → Fe → SS316) to avoid the Ti-Fe intermetallics. Two experimental cases were performed for comparison to evaluate this novel route’s effect. In the first case, SS316 layer was directly deposited on …

Go to article

Nanograin Size Effects On The Strength Of Biphase Nanolayered Composites, Sixie Huang, Irene J. Beyerlein, Caizhi Zhou Dec 2017

Nanograin Size Effects On The Strength Of Biphase Nanolayered Composites, Sixie Huang, Irene J. Beyerlein, Caizhi Zhou

Materials Science and Engineering Faculty Research & Creative Works

In this work, we employ atomic-scale simulations to uncover the interface-driven deformation mechanisms in biphase nanolayered composites. Two internal boundaries persist in these materials, the interlayer crystalline boundaries and intralayer biphase interfaces, and both have nanoscale dimensions. These internal surfaces are known to control the activation and motion of dislocations, and despite the fact that most of these materials bear both types of interfaces. From our calculations, we find that the first defect event, signifying yield, is controlled by the intralayer spacing (grain size, d), and not the intralayer biphase spacing (layer thickness, h). The interplay of two internal sizes …

Go to article

Nonlinear Optical Properties Of Gesbs Chalcogenide Waveguides, Ju Won Choi, Byoung Uk Sohn, George F.R. Chen, Dawn T.H. Tan, Zhaohong Han, Lionel C. Kimerling, Charmayne Smith (Lonergan), Kathleen A. Richardson, Anuradha M. Agarwal Nov 2017

Nonlinear Optical Properties Of Gesbs Chalcogenide Waveguides, Ju Won Choi, Byoung Uk Sohn, George F.R. Chen, Dawn T.H. Tan, Zhaohong Han, Lionel C. Kimerling, Charmayne Smith (Lonergan), Kathleen A. Richardson, Anuradha M. Agarwal

Materials Science and Engineering Faculty Research & Creative Works

We characterize the nonlinear optical properties of GeSbS chalcogenide glasses with fiber-based experiments. A waveguide nonlinear parameter of 7 W-1/m and nonlinear refractive index of 3.71 x 10-18 m2/W are estimated by self-phase modulation. A GeSbS waveguide could also generate a supercontinuum from 1280 to 2120 nm at the -30 dB level for maximum coupled power of 340 W, showing a 14-fold spectral broadening of the input spectrum explained by cascaded stimulated Raman scattering.

Go to article

Effective Mechanical Properties Of Multilayer Nano-Heterostructures, T Mukhopadhyay, A Mahata, S Adhikari, Mohsen Asle Zaeem Nov 2017

Effective Mechanical Properties Of Multilayer Nano-Heterostructures, T Mukhopadhyay, A Mahata, S Adhikari, Mohsen Asle Zaeem

Materials Science and Engineering Faculty Research & Creative Works

Two-dimensional and quasi-two-dimensional materials are important nanostructures because of their exciting electronic, optical, thermal, chemical and mechanical properties. However, a single-layer nanomaterial may not possess a particular property adequately, or multiple desired properties simultaneously. Recently a new trend has emerged to develop nano-heterostructures by assembling multiple monolayers of different nanostructures to achieve various tunable desired properties simultaneously. For example, transition metal dichalcogenides such as MoS2 show promising electronic and piezoelectric properties, but their low mechanical strength is a constraint for practical applications. This barrier can be mitigated by considering graphene-MoS2 heterostructure, as graphene possesses strong mechanical properties. We …

Go to article

Investigation Of Build Strategies For A Hybrid Manufacturing Process Progress On Ti-6al-4v, Lei Yan, Leon Hill, Frank W. Liou, Joseph William Newkirk Aug 2017

Investigation Of Build Strategies For A Hybrid Manufacturing Process Progress On Ti-6al-4v, Lei Yan, Leon Hill, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The various processing parameters of a hybrid manufacturing process, including deposition and machining, is being investigated with a Design of Experiment (DoE). The intent was to explore the effect of different build strategies on the final part’s Vickers hardness, tensile test, fatigue life, and microstructure. From this experiment, the processing parameters can be linked to various mechanical properties. This will lead to the ability to create a combination of deposition and machining parameters, which will result in improved mechanical properties.

Go to article

Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas Aug 2017

Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70 ⁰C to melt the PCL. The part is then …

Go to article

Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai Aug 2017

Building Zr-Based Metallic Glass Part On Ti-6al-4v Substrate By Laser-Foil-Printing Additive Manufacturing, Yingqi Li, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Through using Zr intermediate layers, Zr52.5Ti5Al10Ni14.6Cu17.9 metallic glass (MG) parts are successfully built on Ti-6Al-4V substrates by laser-foil-printing (LFP) additive manufacturing technology in which MG foils are laser welded layer-by-layer onto the substrate. The printed MG part is free of porosity, cracking and crystallization; additionally, its glass transition temperature, crystallization temperature, micro-hardness, and tensile strength are very similar to the original MG material. The Zr intermediate layers are aimed at preventing direct interaction between the first layer of MG foil and the Ti substrate; otherwise, the welded MG foils would peel …

Go to article

Bonding Of 304l Stainless Steel To Cast Iron By Selective Laser Melting, Baily Thomas, Austin T. Sutton, Ming-Chuan Leu, Nikhil Doiphode Aug 2017

Bonding Of 304l Stainless Steel To Cast Iron By Selective Laser Melting, Baily Thomas, Austin T. Sutton, Ming-Chuan Leu, Nikhil Doiphode

Mechanical and Aerospace Engineering Faculty Research & Creative Works

While cast iron is widely used in industry, a major limitation is the weldability of a dissimilar material onto cast iron due to hot cracking as a result of lack of ductility from graphite flakes. Consequently, a significant amount of preheat is often employed to reduce the cooling rate in the fusion zone, which, however, may lead to distortion of the welded parts. A potential remedy could be the Selective Laser Melting (SLM) process, where only small melt pools are created and thus the overall energy input is reduced. The present paper describes an investigation of the SLM process to …

Go to article

A Two-Dimensional Simulation Of Grain Structure Growth Within Substrate And Fusion Zone During Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, Joseph William Newkirk Aug 2017

A Two-Dimensional Simulation Of Grain Structure Growth Within Substrate And Fusion Zone During Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, a predictive model based on a cellular automaton (CA)-finite element (FE) method has been developed to simulate thermal history and microstructure evolution during metal solidification for a laser-based additive manufacturing process. The macroscopic FE calculation that is validated by thermocouple experiment is designed to update the temperature field and a high cooling rate. A cellular automata-finite element (CAFE) method is developed to describe grain growth in the fusion zone. In the mesoscopic CA model, heterogeneous nucleation sites, grain growth orientation and rate, epitaxial growth, remelting of preexisting grains, metal addition, grain competitive growth, and columnar to equiaxed …

Go to article

Mechanical Properties Of 304l Parts Made By Laser-Foil-Printing Technology, Chia-Hung Hung, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai Aug 2017

Mechanical Properties Of 304l Parts Made By Laser-Foil-Printing Technology, Chia-Hung Hung, Yiyu Shen, Ming-Chuan Leu, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser-Foil-Printing (LFP) is a novel laminated object manufacturing process for metal additive manufacturing. It fabricates three-dimensional metal parts by using a dual-laser system to weld and cut metal foils layer by layer. A main advantage of LFP is the higher cooling rate compared to powder-based laser additive manufacturing processes due to the thermal conductivity difference between foil and powder. This study focuses on the mechanical properties of 304L stainless steel parts built by the LFP process. The experimental results indicate that the yield strength and ultimate tensile strength of LFP fabricated 304L SS parts are higher by 9% and 8% …

Go to article

Design And Fabrication Of Functionally Graded Material From Ti To Γ-Tial By Laser Metal Deposition, Xueyang Chen, Lei Yan, Joseph William Newkirk, Frank W. Liou Aug 2017

Design And Fabrication Of Functionally Graded Material From Ti To Γ-Tial By Laser Metal Deposition, Xueyang Chen, Lei Yan, Joseph William Newkirk, Frank W. Liou

Materials Science and Engineering Faculty Research & Creative Works

Functionally graded material (FGM) is one kind of advanced material characterized by a gradual change in properties as the position varies. The spatial variation of compositional and microstructure over volume is aimed to control corresponding functional properties. In this research, when 100% γ-TiAl was directly deposited on pure Ti substrate, cracks were formed within the γ-TiAl layer. Then a six-layer crack-free functionally graded material of Ti/TiAl was designed and fabricated by laser metal deposition (LMD) method, with composition changing from pure Ti on one side to 100% γ-TiAl on the other side. The fabricated FGM was characterized for material properties …

Go to article

Effects Of Area Fraction And Part Spacing On Degradation Of 304l Stainless Steel Powder In Selective Laser Melting, Cairlin S. Kriewall, Austin T. Sutton, Sreekar Karnati, Joseph William Newkirk, Ming-Chuan Leu Aug 2017

Effects Of Area Fraction And Part Spacing On Degradation Of 304l Stainless Steel Powder In Selective Laser Melting, Cairlin S. Kriewall, Austin T. Sutton, Sreekar Karnati, Joseph William Newkirk, Ming-Chuan Leu

Materials Science and Engineering Faculty Research & Creative Works

In selective laser melting (SLM) systems, a large portion of powder remains unconsolidated and therefore recycling powder could make SLM more economical. Currently, a lack of literature exists specifically targeted at studying the reusability of powder. Furthermore, the definition of powder reusability is complex since powder degradation depends on many factors. The goal of the current research is to investigate the effects of area fraction and part spacing on the degradation of 304L powder in SLM. An experimental study was conducted where various area fractions and part distances were chosen and powder characterization techniques for determination of particle size distributions, …

Go to article

Studying Chromium And Nickel Equivalency To Identify Viable Additive Manufacturing Stainless Steel Chemistries, Zachary T. Hilton, Joseph William Newkirk, Ronald J. O'Malley Aug 2017

Studying Chromium And Nickel Equivalency To Identify Viable Additive Manufacturing Stainless Steel Chemistries, Zachary T. Hilton, Joseph William Newkirk, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Chromium and nickel equivalency modeling has long been used in welding to determine the weldability of steel chemistries. A study was conducted to determine the applicability of Cr-Ni modeling to the additive manufacturing process. Many AM methods involve rapid solidification of small melt pools, similar to welding. Chemistries with varying Cr/Ni ratios were selected for use in a selective laser melting process and modeled using known models. Initial results indicate that the standard "safe welding zone" may not directly apply to additive manufacturing. The capability to build with chemistries outside the weldability “safe zone” could result in improved and varied …

Go to article

Aluminum Matrix Syntactic Foam Fabricated With Additive Manufacturing, M. Spratt, Joseph William Newkirk, K. Chandrashekhara Aug 2017

Aluminum Matrix Syntactic Foam Fabricated With Additive Manufacturing, M. Spratt, Joseph William Newkirk, K. Chandrashekhara

Materials Science and Engineering Faculty Research & Creative Works

Syntactic foams are lightweight structural composites with hollow reinforcing particles embedded in a soft matrix. These materials have applications in transportation, packaging, and armor due to properties such as relatively high specific stiffness, acoustic dampening, and impact absorption. Aluminum matrices are the most widely studied of metal matrix syntactic foams, but there is little to no research in regards to processing the foams with additive manufacturing. It is theorized that the fast cooling rates and limited kinetic energy input of additive could reduce two issues commonly associated with processing syntactic foams: microsphere flotation in the melt and microsphere fracture during …

Go to article

Characterization Of Heat-Affected Powder Generated During Selective Laser Melting Of 304l Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk Aug 2017

Characterization Of Heat-Affected Powder Generated During Selective Laser Melting Of 304l Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The selective laser melting (SLM) process is an Additive Manufacturing (AM) technique that uses a laser to fuse successive layers of powder into near fully dense components. Due to the large energy input from the laser during processing, vaporization and instabilities in the melt pool occur causing the formation of condensate and laser spatter, collectively known as heat-affected powder. Since heat-affected powder settles into the powder bed, the properties of the unconsolidated powder may be altered compromising its reusability. In this study, characterization of 304L heat-affected powder was performed through particle size distribution measurements, x-ray diffraction, metallography, energy-dispersive spectroscopy mapping, …

Go to article

Influence Of Gage Length On Miniature Tensile Characterization Of Powder Bed Fabricated 304l Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, Joseph William Newkirk Aug 2017

Influence Of Gage Length On Miniature Tensile Characterization Of Powder Bed Fabricated 304l Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Miniature tensile specimens with varying aspect ratios were fabricated from 304L stainless steel (SS) made using powder bed additive manufacturing (AM) process. The tensile characteristics measured from these specimens were analyzed to assess the impact of gage length. The study found no impact upon varying gage length on yield and ultimate strength measurements. However, a significant impact was observed on strain measurements. This data was also used to perform Weibull statistics to estimate the stochastic performance of the material. Fractography was performed to visually identify the types of flaws. A comparative study with specimens fabricated from cold rolled annealed 304 …

Go to article

Fabricating Zirconia Components With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas Aug 2017

Fabricating Zirconia Components With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming-Chuan Leu, Greg Hilmas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70°C to melt the PCL. The part is then sintered …

Go to article

Effects Of Iron Concentration And Redox States On Failure Of Boron-Free E-Glass Fibres Under Applied Stress In Different Conditions, Qingwei Wang, Richard K. Brow, Hong Li, Erica Ann Ronchetto Aug 2017

Effects Of Iron Concentration And Redox States On Failure Of Boron-Free E-Glass Fibres Under Applied Stress In Different Conditions, Qingwei Wang, Richard K. Brow, Hong Li, Erica Ann Ronchetto

Materials Science and Engineering Faculty Research & Creative Works

Hydrolysis resistance of boron-free E-glass fiber with different total iron oxide (Fe2O3) concentrations, iron redox index and durations of fiber ageing up to 180 days at 50◦C with 50% relative humidity (RH) was studied. The effect of ageing on the fibre failure measured in two different test environments was examined by using two-point bending method. Based on the differences in failure strains of the fibres obtained from the two conditions as a function of ageing time, the Griffith theory of solid fracture was applied to estimate glass surface energy difference in ageing conditions. The results showed …

Go to article

Homogenization Of Plastic Deformation In Heterogeneous Lamella Structures, Rui Yuan, Irene J. Beyerlein, Caizhi Zhou Jul 2017

Homogenization Of Plastic Deformation In Heterogeneous Lamella Structures, Rui Yuan, Irene J. Beyerlein, Caizhi Zhou

Materials Science and Engineering Faculty Research & Creative Works

It has been shown that unlike its constituent nanocrystalline (NC) phase, a heterogeneous lamella (HL) composite comprising NC and coarse-grain layers exhibits greatly improved ductility. To understand the origin of this enhancement, we present a 3D discrete dislocation, crystal plasticity finite element model to study the development of strains across this microstructure. Here we show that the HL structure homogenizes the plastic strains in the NC layer, weakening the effect of strain concentrations. These findings can provide valuable insight into the effects of material length scales on material instabilities, which is needed to design heterogeneous structures with superior properties.

Go to article

Effects Of Specimen Size And Yttria Concentration On Mechanical Properties Of Single Crystalline Yttria-Stabilized Tetragonal Zirconia Nanopillars, Ning Zhang, Mohsen Asle Zaeem Jul 2017

Effects Of Specimen Size And Yttria Concentration On Mechanical Properties Of Single Crystalline Yttria-Stabilized Tetragonal Zirconia Nanopillars, Ning Zhang, Mohsen Asle Zaeem

Materials Science and Engineering Faculty Research & Creative Works

The nanoscale plastic deformation of yttria-stabilized tetragonal zirconia (YSTZ) is highly dependent on the crystallographic orientations, i.e., dislocation is induced when the loading direction is 45° tilted to {111} and {101} slip planes, while tetragonal to monoclinic phase transformation dominates the plastic deformation when loading direction is perpendicular to the slip planes. This study investigates the effects of specimen size and yttria concentration on the mechanical response of single crystalline YSTZ nanopillars. Through uniaxial compression test, the smaller-is-stronger phenomenon is revealed in nanopillars deformed through a dislocation motion mechanism. Serrated stacking faults are observed in the smallest nanopillar, while neat …

Go to article

Solvent Based 3d Printing Of Biopolymer/Bioactive Glass Composite And Hydrogel For Tissue Engineering Applications, Krishna Kolan, Yong Liu, Jakeb Baldridge, Caroline Murphy, Julie A. Semon, D. E. Day, Ming-Chuan Leu Jul 2017

Solvent Based 3d Printing Of Biopolymer/Bioactive Glass Composite And Hydrogel For Tissue Engineering Applications, Krishna Kolan, Yong Liu, Jakeb Baldridge, Caroline Murphy, Julie A. Semon, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

Three-dimensional (3D) bioprinting is an emerging technology in which scaffolding materials and cell-laden hydrogels may be deposited in a pre-determined fashion to create 3D porous constructs. A major challenge in 3D bioprinting is the slow degradation of melt deposited biopolymer. In this paper, we describe a new method for printing poly-caprolactone (PCL)/bioactive borate glass composite as a scaffolding material and Pluronic F127 hydrogel as a cell suspension medium. Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste using one syringe while hydrogel was extruded and deposited in between the PCL/borate glass …

Go to article

Nanostructured Dielectric Materials For High Energy Density Multi Layer Ceramic Capacitors, Fatih Dogan May 2017

Nanostructured Dielectric Materials For High Energy Density Multi Layer Ceramic Capacitors, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

A high energy density multilayer ceramic capacitor, having at least two electrode layers and at least one substantially dense polycrystalline dielectric layer positioned therebetween. The at polycrystalline dielectric layer has an average grain size of less than about 300 nanometers, a particle size distribution of between about 150 nanometers and about 3 micrometers, and a maximum porosity of about 1 percent. The dielectric layer is selected from the group including TiO2, BaTiO3, Al2O3, ZrO2, lead zirconium titanate, and combinations thereof and has a breakdown strength of at least about 1100 …

Go to article

The Role Of Ceramic And Glass Science Research In Meeting Societal Challenges: Report From An Nsf-Sponsored Workshop, Katherine T. Faber, Tewodros Asefa, Monika Backhaus-Ricoult, Richard K. Brow, Julie Y. Chan, Shen Dillon, William Fahrenholtz, For Full List Of Authors, See Publisher's Website. May 2017

The Role Of Ceramic And Glass Science Research In Meeting Societal Challenges: Report From An Nsf-Sponsored Workshop, Katherine T. Faber, Tewodros Asefa, Monika Backhaus-Ricoult, Richard K. Brow, Julie Y. Chan, Shen Dillon, William Fahrenholtz, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

Under the sponsorship of the U.S. National Science Foundation, a workshop on emerging research opportunities in ceramic and glass science was held in September 2016. Reported here are proceedings of the workshop. The report details eight challenges identified through workshop discussions: Ceramic processing: Programmable design and assembly; The defect genome: Understanding, characterizing, and predicting defects across time and length scales; Functionalizing defects for unprecedented properties; Ceramic flatlands: Defining structure-property relations in free-standing, supported, and confined two-dimensional ceramics; Ceramics in the extreme: Discovery and design strategies; Ceramics in the extreme: Behavior of multimaterial systems; Understanding and exploiting glasses and melts under …

Go to article

Effects Of Yttria Concentration And Microstructure On Electric Breakdown Of Yttria Stabilized Zirconia, Oratai Jongprateep, Vladimir Petrovsky, Fatih Dogan Apr 2017

Effects Of Yttria Concentration And Microstructure On Electric Breakdown Of Yttria Stabilized Zirconia, Oratai Jongprateep, Vladimir Petrovsky, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Ceramic materials have great potentials for capacitor application. However, low breakdown strength of the materials remains a key challenge for development of high-performance capacitors. In this study, yttria stabilized zirconia (YSZ) were fabricated and tested for breakdown strength. YSZ samples with 3, 8, and 10 mol% yttria were carefully processed to control grain size and porosity level. Experimental results revealed that breakdown strength as high as 2 MV/cm could be achieved. The breakdown strength was not significantly affected by porosity level, but it was by yttria concentration. Relationship among yttria concentration, residual porosity and breakdown strength is discussed in this …

Go to article

Controlling Calcium Compound Formation In Biocompatible Materials For Tissue Regeneration And Repair In Mammals, Steven B. Jung, D. E. Day Feb 2017

Controlling Calcium Compound Formation In Biocompatible Materials For Tissue Regeneration And Repair In Mammals, Steven B. Jung, D. E. Day

Materials Science and Engineering Faculty Research & Creative Works

A biocompatible composition for tissue repair or regeneration in mammals comprising one or more glass former compounds selected from the group consisting of B2O3, P2O5, and SiO2 and director elements selected from the group consisting of Cu, Sr, Zn, Fe, Mn, Cr, V, Nb, Mo, W, Ba, Co, S, Al, Ti, Y, Mg, Si and/or Ni to promote in vivo calcium compound formation of calcium carbonate or other calcium compounds other than hydroxyapatite. Upon direct application of the biocompatible composition to a mammalian host, calcium carbonate or other calcium compounds other …

Go to article

Scaffold For Tissue Regeneration In Mammals, D. E. Day, Steven B. Jung, Roger F. Brown Feb 2017

Scaffold For Tissue Regeneration In Mammals, D. E. Day, Steven B. Jung, Roger F. Brown

Materials Science and Engineering Faculty Research & Creative Works

A three-dimensional scaffold with interconnected pores for repair of tissue comprising a scaffold body for structural support of the tissue scaffold, where the scaffold body comprises scaffold body components bonded to each other and made from component materials comprising about 40 to about 90 wt % B2O3, and two or more other oxides, wherein the scaffold body has a porosity between about 15 and about 90 vol %.

Go to article

Processing, Microstructure, And Mechanical Properties Of Zirconium Diboride-Molybdenum Disilicide Ceramics And Dual Composite Architectures, Ryan Joseph Grohsmeyer Jan 2017

Processing, Microstructure, And Mechanical Properties Of Zirconium Diboride-Molybdenum Disilicide Ceramics And Dual Composite Architectures, Ryan Joseph Grohsmeyer

Doctoral Dissertations

"This research had two objectives: characterization of processing-microstructure-mechanical property relationships of conventional ZrB2-MoSi2 ceramics at room temperature (RT) and 1500⁰C in air, and fabrication of ZrB2-MoSi2 dual composite architectures (DCAs) for use near 1500⁰C. Elastic moduli, fracture toughness, and flexure strength were measured at RT and 1500⁰C for 15 ZrB2-MoSi2 ceramics hot pressed using fine, medium, or coarse ZrB2 starting powder with 5-70 vol.% MoSi2, referred to as FX, MX, and CX respectively where X is the nominal MoSi2 content. MoSi2 decomposed during sintering, resulting in …

Go to article

First Prev Next Last