Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 31 - 60 of 2218

Full-Text Articles in Materials Science and Engineering

Toward Sustainable 3d Printable Cementitious Materials: Low-Carbon Design With Fiber Reinforcement, Nima Mahmoudzadeh Vaziri Apr 2026

Toward Sustainable 3d Printable Cementitious Materials: Low-Carbon Design With Fiber Reinforcement, Nima Mahmoudzadeh Vaziri

Miners Solving for Tomorrow Research Conference

3D printing of cementitious materials, as an emerging construction technology, faces challenges in both mechanical performance and sustainability. Conventional mixture designs rely on high cement contents, leading to increased CO2 emissions, while printed elements often exhibit brittle behavior with limited crack resistance and reduced post-cracking performance. This study investigates the development of low-carbon 3D printed cementitious composites using environmentally friendly supplementary cementitious materials (SCMs) and fillers, combined with fiber reinforcement to enhance mechanical performance. Locally available SCMs and fillers were incorporated to significantly reduce cement content (>40%) and improve sustainability. Fiber reinforcement was introduced to mitigate brittleness and enhance …

Go to article

Structural Analysis On Iron Phosphate Glasses After Dechlorination Of Mixed Chloride Waste Forms, Lucas Greiner Apr 2026

Structural Analysis On Iron Phosphate Glasses After Dechlorination Of Mixed Chloride Waste Forms, Lucas Greiner

Miners Solving for Tomorrow Research Conference

Molten salt reactors (MSRs) require durable waste forms for immobilizing halide-rich salts. This study examines iron phosphate glasses derived from a simple salt mixture (SSM), focusing on the effect of Fe₂O₃ additions (2.5–10 wt%) on structure and phase stability. Intermediates were processed at 300–600 °C and vitrified at 1050 °C. Raman spectroscopy and HPLC show that increasing iron content depolymerizes the phosphate network, shifting from Q² toward Q¹ species and reducing chain length. XRD confirms amorphous behavior for ≤7.5 wt% Fe₂O₃, while 10 wt% shows crystallization, with KFeP₂O₇ observed in samples processed at 400 °C. Despite reduced connectivity, iron enhances …

Go to article

A Dataset Of Precipitate-Containing Multi-Principal Element Alloys, Anshu Raj, Xin Wang, Matthew Luebbe, Haiming Wen, Kun Lu, Shuozhi Xu Apr 2026

A Dataset Of Precipitate-Containing Multi-Principal Element Alloys, Anshu Raj, Xin Wang, Matthew Luebbe, Haiming Wen, Kun Lu, Shuozhi Xu

Materials Science and Engineering Faculty Research & Creative Works

We report a curated dataset that brings together composition, processing conditions, microstructural details, and mechanical properties for 396 combinations of alloy composition and processing condition drawn from 100 peer-reviewed research articles on precipitate-containing multi-principal element alloys (MPEAs). The dataset was created by first utilizing a generative large language model for information extraction, followed by expert review to ensure accurate recovery of materials data. Compositional information was taken directly from tables and text, while processing routes — including homogenization, rolling, recrystallization, and aging — were converted into uniform temperature and time metrics. Microstructural descriptors, including precipitate phases and sizes, were consolidated …

Go to article

Voltage Breakdown Strength And Energy Density Of Ceramic Srtio₃ At Cryogenic Temperatures From 295 K To 77 K, Hung Trinh, Alan Devoe, Fatih Dogan Mar 2026

Voltage Breakdown Strength And Energy Density Of Ceramic Srtio₃ At Cryogenic Temperatures From 295 K To 77 K, Hung Trinh, Alan Devoe, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The low-temperature dependence of the DC dielectric breakdown strength (EBD) and the energy storage density (W) of capacitors, fabricated from high purity polycrystalline strontium titanate, were investigated in the temperature range from 295 K to 77 K. Test samples were constructed with a process similar to that used for multilayer ceramic capacitors (MLCCs). The permittivity, loss tangent, leakage current, and breakdown strength were measured as a function of temperature and voltage. Weibull statistical analysis was used to quantify breakdown distributions. Despite electric-field suppression of permittivity, breakdown strength increased significantly with decreasing temperatures, leading to enhanced energy density. The breakdown field …

Go to article

Wasting The Risk, Or Risking The Waste? Understanding The Trends Of Critical Raw Material Loss Into Waste Streams During Copper And Aluminium Processing, Ella Lausberg, Joël Brugger, Rahul Ram, John R. Owen, Deanna Kemp, Micheal S. Moats, Jonathan Hamisi, Vanessa N.L. Wong Mar 2026

Wasting The Risk, Or Risking The Waste? Understanding The Trends Of Critical Raw Material Loss Into Waste Streams During Copper And Aluminium Processing, Ella Lausberg, Joël Brugger, Rahul Ram, John R. Owen, Deanna Kemp, Micheal S. Moats, Jonathan Hamisi, Vanessa N.L. Wong

Materials Science and Engineering Faculty Research & Creative Works

Many critical raw materials (CRM) necessary in the transition to carbon-neutral energy reside in the waste streams of mining projects, as they are by-products and often not recovered alongside the primary metal. This work aims to document (i) the loss and potential recovery of by-product metals during the host commodity processing and (ii) the consequences of non-recovery, via a multi-scale risk–reward analysis. The information on the deportment of by-product metals through processing circuits is crucial for treating them as a resource, without which they risk near-permanent loss when treated as 'waste'. We review the deportment of tellurium and selenium as …

Go to article

New Insights Into Dynamic Evolution Of Colloidal Network Structure During Early-Age Hardening Of Cementitious Materials, Hengrui Liu, Kaiyin Zhao, Shipeng Zhang, Hanghua Zhang, Shuangshuang Liu, Lucen Hao, Hongyan Ma, Kamal Khayat, Chi Sun Poon Mar 2026

New Insights Into Dynamic Evolution Of Colloidal Network Structure During Early-Age Hardening Of Cementitious Materials, Hengrui Liu, Kaiyin Zhao, Shipeng Zhang, Hanghua Zhang, Shuangshuang Liu, Lucen Hao, Hongyan Ma, Kamal Khayat, Chi Sun Poon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The evolution of microstructure in cementitious materials during their transition from fluid to solid state plays a critical role in determining their ultimate mechanical strength and overall performance. This hydration stage primarily involves a dynamic densification process occurring within the colloidal network. However, the field of cement-based materials currently lacks a comprehensive theoretical framework and associated parameters capable of effectively characterizing the specific structural regions within this network. In this study, we propose an Improved Particle Linkage (IPL) theory for describing the strength, types, and quantities of particle linkages within colloidal network. The IPL theory classifies the internal network structure …

Go to article

Microstructural Evolution Of Zirconium Diboride Irradiated With 5–10 Mev Au Ions At Room Temperature And 570 °C, Narrie Loftus, José Olivares, Miguel Crespillo, Esther Enríquez Pérez, Jeremy Watts, Eric W. Bohannan, Gregory Hilmas, William Fahrenholtz, Joseph Graham Mar 2026

Microstructural Evolution Of Zirconium Diboride Irradiated With 5–10 Mev Au Ions At Room Temperature And 570 °C, Narrie Loftus, José Olivares, Miguel Crespillo, Esther Enríquez Pérez, Jeremy Watts, Eric W. Bohannan, Gregory Hilmas, William Fahrenholtz, Joseph Graham

Materials Science and Engineering Faculty Research & Creative Works

Zirconium diboride was irradiated with 5 MeV Au2 + , 7 MeV Au4+ and 10 MeV Au3+ ions at room temperature and 570 °C to doses from 1 to 8 displacements per atom (dpa). Grazing incidence X-ray diffraction (GIXRD) analysis revealed no secondary phase formation. Rietveld analysis of the GIXRD data indicated an accumulation of microstrain at low dpa and room temperature. Dislocations observed in transmission electron microscopy (TEM) cross-sections are likely the main contributor to the microstrain. High dpa and high-temperature samples exhibit lower lattice distortion than lower dpa samples, suggesting the presence of enhanced defect …

Go to article

Thermally Stable Sic Particulate-Reinforced Sic Composites Up To 2000 ℃ Fabricated By Precursor Impregnation And Pyrolysis Method, Jian Gu, Vu Viet Hung, Lun Feng, William G. Fahrenholtz, Daejong Kim, Seyoung Kim, Sea Hoon Lee Mar 2026

Thermally Stable Sic Particulate-Reinforced Sic Composites Up To 2000 ℃ Fabricated By Precursor Impregnation And Pyrolysis Method, Jian Gu, Vu Viet Hung, Lun Feng, William G. Fahrenholtz, Daejong Kim, Seyoung Kim, Sea Hoon Lee

Materials Science and Engineering Faculty Research & Creative Works

The thermo-mechanical properties of SiC particulate-reinforced SiC composites (SiC-PRCs), fabricated using precursor impregnation & pyrolysis (PIP) process, were analyzed up to 2000 ℃. The relative density of the SiC-PRCs after 4 PIP cycles was 88.6 %. The number of PIP cycles required decreased to nearly half compared with the conventional PIP method by using ultra-high concentration slurries up to 70 vol%. In addition, room-temperature bending strength (215 MPa) and Young's modulus (269 GPa) improved as the solid loading of the slurry increased. The bending strength increased to 232 MPa at 2000 ℃ in Ar. Despite the thermal deterioration of the …

Go to article

A Software Package For Generating Robust And Accurate Potentials Using The Moment Tensor Potential Framework, Josiah Roberts, Biswas Rijal, Simon Divilov, Jon Paul Maria, William G. Fahrenholtz, Douglas E. Wolfe, Donald W. Brenner, Stefano Curtarolo, Eva Zurek Mar 2026

A Software Package For Generating Robust And Accurate Potentials Using The Moment Tensor Potential Framework, Josiah Roberts, Biswas Rijal, Simon Divilov, Jon Paul Maria, William G. Fahrenholtz, Douglas E. Wolfe, Donald W. Brenner, Stefano Curtarolo, Eva Zurek

Materials Science and Engineering Faculty Research & Creative Works

We present the Plan for Robust and Accurate Potentials (PRAPs), a software package for training and using moment tensor potentials (MTPs) in concert with the Machine Learned Interatomic Potentials (MLIP) software package. PRAPs provides an automated workflow to train MTPs using active learning procedures, and a variety of utilities to ease and improve workflows when utilizing the MLIP software. PRAPs was originally developed in the context of crystal structure prediction, in which one calculates convex hulls and predicts low energy metastable and thermodynamically stable structures, but the potentials PRAPs develops are not limited to such applications. PRAPs produces two potentials, …

Go to article

Superhard Refractory High-Entropy Diborides, M. D. Hossain, N. S. Mcilwaine, N. O. Marquez-Rios, A. C. Feltrin, V. Chawla, R. A. Mayanovic, W. G. Fahrenholtz, D. Penumadu, E. Zurek, D. W. Brenner, D. E. Wolfe, S. Divilov, H. Eckert, S. Curtarolo Mar 2026

Superhard Refractory High-Entropy Diborides, M. D. Hossain, N. S. Mcilwaine, N. O. Marquez-Rios, A. C. Feltrin, V. Chawla, R. A. Mayanovic, W. G. Fahrenholtz, D. Penumadu, E. Zurek, D. W. Brenner, D. E. Wolfe, S. Divilov, H. Eckert, S. Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Using first-principles calculations and companion experimental validations, we demonstrate that the valence electron concentration (VEC) can be used to self-consistently parameterize the bonding characteristics of high-entropy diborides (HEBs) and in turn predict their mechanical properties. When VEC is 10.0 per formula unit (f.u.), HEBs enter the superhard category where Hv>40GPa because bonding states are optimally filled to resist shear deformation. Conversely, above or below a VEC of 10.0, the hardness decreases due to the filling of antibonding or the emptying of bonding states of the HEBs, respectively. This result is supported by analyses of the electronic structure, bonding, antibonding, …

Go to article

A Borophosphate Glass Doped With Cobalt Oxide Improves Skeletal Muscle Structure And Function In Myopathic Mice, Jacob A. Kendra, Alexandra G. Naman, Rebekah L. Blatt, Carla D. Zingariello, Richard K. Brow, Steven S. Segal, Aaron B. Morton Mar 2026

A Borophosphate Glass Doped With Cobalt Oxide Improves Skeletal Muscle Structure And Function In Myopathic Mice, Jacob A. Kendra, Alexandra G. Naman, Rebekah L. Blatt, Carla D. Zingariello, Richard K. Brow, Steven S. Segal, Aaron B. Morton

Materials Science and Engineering Faculty Research & Creative Works

Skeletal muscle myopathy remains a significant cause of disability with limited treatment strategies. Advancements in tissue engineering have led to the development of borophosphate bioactive glasses (BPBGs) capable of enhancing skeletal muscle structure and function. Using a mouse model of severe myopathy (D2.mdx), we investigated muscle force, regeneration, angiogenesis and inflammation at 14, 70 and 140 days post-treatment (dpt). Tibialis anterior (TA) muscles of D2.mdx mice that received a single injection of cobalt oxide-doped BPBG (CoO-TRIM) particles exhibit greater active force, myofiber size, and regeneration through 70 dpt compared to control D2.mdx mice injected with Saline. Vascular endothelial growth factor …

Go to article

Hardness Of (Hf,Ti,W,Zr)B2/(Hf,Ti,W,Zr)C-Based Ceramics With Varying Wb Content, Suzana Filipović, William G. Fahrenholtz, Gregory E. Hilmas, Nina Obradović, Stefano Curtarolo Feb 2026

Hardness Of (Hf,Ti,W,Zr)B2/(Hf,Ti,W,Zr)C-Based Ceramics With Varying Wb Content, Suzana Filipović, William G. Fahrenholtz, Gregory E. Hilmas, Nina Obradović, Stefano Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Compositionally complex (Hf,Ti,Zr,W)B2/(Hf,Ti,Zr,W)C-based ceramics were produced with different boride and carbide phase contents by varying the C/B4C molar ratio used in boro/carbothermal reduction. A monoboride phase based on WB was detected in all compositions. As the C/B4C ratio was varied, the WB content decreased from 23.7 vol% for a C/B4C ratio of 6.0–15.3 vol% for a C/B4C ratio of 10.3. Further increases in the C/B4C ratio increased the WB content. The monoboride phase contained mainly W and Ti in a solid solution with the nominal composition of (W …

Go to article

Advances And Challenges In Nano-Modified Cementitious Composites: Mechanisms, Dispersion Strategies, And Impact On Mechanical Properties, Fatemeh Mohammadi Ghahsareh, Pengwei Guo, Nusrath Jaha, Yi Bao, Kamal H. Khayat, Weina Meng Feb 2026

Advances And Challenges In Nano-Modified Cementitious Composites: Mechanisms, Dispersion Strategies, And Impact On Mechanical Properties, Fatemeh Mohammadi Ghahsareh, Pengwei Guo, Nusrath Jaha, Yi Bao, Kamal H. Khayat, Weina Meng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Nanomaterials are increasingly utilized to enhance the mechanical properties, durability, and functionality of concrete materials but face challenges such as agglomeration and uneven dispersion in cementitious systems, which can offset the intended improvements. This paper reviews the advances and challenges associated with nano-modified cementitious composites, elucidating fundamental mechanisms and highlighting strategies for overcoming the challenges through experimental and computing techniques. The reviewed contents include (1) the classification of nanomaterials commonly used in cementitious systems and the mechanisms through which they enhance the mechanical properties of cementitious composites; (2) challenges of nanomaterials such as agglomeration in water, re-agglomeration in cementitious systems, …

Go to article

Integrated Computational And Experimental Investigation Of Groups V And Vi Metals In (M,Hf,Ti,Zr)B2-(M,Hf,Ti,Zr)C Ceramics, Ana C. Feltrin, Simon Divilov, Gregory E. Hilmas, Stefano Curtarolo, William G. Fahrenholtz Feb 2026

Integrated Computational And Experimental Investigation Of Groups V And Vi Metals In (M,Hf,Ti,Zr)B2-(M,Hf,Ti,Zr)C Ceramics, Ana C. Feltrin, Simon Divilov, Gregory E. Hilmas, Stefano Curtarolo, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Dual-phase compositionally complex ultra-high temperature ceramics were formulated by incorporating different Groups V and VI metals such as V, Nb, Ta, Cr, Mo, or W into a base composition containing the Group IV elements, Hf, Ti, and Zr. Metal distribution was predicted using first-principles-based thermodynamics simulations and compared with experimental results. Moreover, phase stability, microstructure, and mechanical properties were evaluated for all of the ceramics. Compositions containing Cr, V, Nb, or Ta formed dual-phase ceramics containing only one boride and one carbide phase, while compositions containing Mo or W developed an additional third phase. The experimental metal distribution trends generally …

Go to article

Zirconium And Hafnium Interdiffusion Study In Zrb2–Hfb2 System, Yue Zhou, Ana C. Feltrin, William G. Fahrenholtz, Gregory E. Hilmas Feb 2026

Zirconium And Hafnium Interdiffusion Study In Zrb2–Hfb2 System, Yue Zhou, Ana C. Feltrin, William G. Fahrenholtz, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Interdiffusion of Zr and Hf in the diboride system was investigated. High-purity zirconium diboride (ZrB2) and hafnium diboride (HfB2) were prepared by a combination of boro-/carbothermal reduction synthesis and densification by spark plasma sintering. The bulk ceramics had relative densities of 99.3% for ZrB2 and 99.7% for HfB2, and both ceramics were phase-pure by x-ray diffraction analysis. Diffusion couples of ZrB2 and HfB2 were annealed at temperatures ranging from 2000°C to 2200°C for times from 4 to 12 h. Zr and Hf elemental concentration profiles were measured using energy dispersive spectroscopy …

Go to article

Co-Calcination Of Limestone And Clay Enhances The Performance Of Limestone Calcined Clay Cement (Lc3), Oluwadamilare Charles Adesina, Sahil Surehali, Avinaya Tripathi, Kayla Lauren Lee, Bryan K. Aylas-Paredes, Aditya Kumar, Narayanan Neithalath Feb 2026

Co-Calcination Of Limestone And Clay Enhances The Performance Of Limestone Calcined Clay Cement (Lc3), Oluwadamilare Charles Adesina, Sahil Surehali, Avinaya Tripathi, Kayla Lauren Lee, Bryan K. Aylas-Paredes, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Limestone-calcined clay cements (LC3) reduce the environmental impact of cement production and accelerate the industry transition toward carbon neutrality. While conventional LC3 with 50% clinker replacement (LC3-50) demonstrate long-term performance comparable to ordinary Portland cement (OPC) in concrete, early-age performance is generally compromised. This study explores for the first time, joint thermal treatment—that is, co-calcination—of limestone (LS) and bulk kaolinitic clay in mass ratios of 1:1 to 1:4 under a calcination regime specifically designed to ensure activation of the clay mineral. The co-calcination converts a small fraction of LS to metastable CaO, thus providing an …

Go to article

Inclusion Engineering Through Deoxidation Practice Optimization For Enhanced Mechanical Properties Of Cast Cr-Ni-Mo Steel, Kingsley T. Amatanweze, Viraj A. Athavale, Simon Lekakh, Ronald J. O'Malley, Laura N. Bartlett Feb 2026

Inclusion Engineering Through Deoxidation Practice Optimization For Enhanced Mechanical Properties Of Cast Cr-Ni-Mo Steel, Kingsley T. Amatanweze, Viraj A. Athavale, Simon Lekakh, Ronald J. O'Malley, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

Deoxidation is an integral part of steelmaking, as it determines steel castability, cleanliness, and porosity levels of the final product. Steel quality is critical to its performance and can be sabotaged by impurities such as non-metallic inclusions and porosity. This study investigates the effects of four distinct deoxidation practices, using Al, Al-Ca, Zr-Ca, and Mn-Si respectively, on tensile strength, tensile ductility and impact toughness of a Cr-Ni-Mo steel. These deoxidation reactions were modeled on a commercially available thermodynamic software and possible inclusion product phases were predicted. The casting samples were studied on a scanning electron microscope (SEM) utilizing energy dispersive …

Go to article

Post-Calcium Treatment Evolution Of Alumina (Al2o3) Inclusions Morphology, Naziru I. Fuseini, Ronald J. O'Malley, Todd P. Sander, Jeffrey D. Smith, Haiming Wen, Laura N. Bartlett Feb 2026

Post-Calcium Treatment Evolution Of Alumina (Al2o3) Inclusions Morphology, Naziru I. Fuseini, Ronald J. O'Malley, Todd P. Sander, Jeffrey D. Smith, Haiming Wen, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The post-calcium morphological evolution of Al2O3 inclusions formed under high-oxygen supersaturation (~1000 ppm) was investigated through time-resolved sampling and quenching of aluminum-killed, calcium-treated steel. SEM-EDS analysis revealed the formation of angular two-phase CaO·Al2O3–CaS inclusions within 1 minute, gradually transforming into spherical liquid 12CaO·7Al2O3 and CaO·Al2O3 with a thin CaS layer around it. The 3D morphology of the CaS phase of the complex CaO·Al2O3–CaS inclusions observed at 1 minute appeared as a cone-cap attached to the partially modified CaO·Al2O3. This …

Go to article

Thermodynamic Analysis Of Metal Segregation In Two Metal Boride-Carbide Ceramics Containing V With Cr, Hf, Ti, Or Zr, Ana C. Feltrin, Simon Divilov, Gregory E. Hilmas, Stefano Curtarolo, William G. Fahrenholtz Feb 2026

Thermodynamic Analysis Of Metal Segregation In Two Metal Boride-Carbide Ceramics Containing V With Cr, Hf, Ti, Or Zr, Ana C. Feltrin, Simon Divilov, Gregory E. Hilmas, Stefano Curtarolo, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Dual-phase carbide-boride ceramics in different vanadium-Me (Me = Cr, Hf, Ti, and Zr) binary systems were synthesized by boro/carbothermal reduction under stoichiometric and carbon-deficient conditions and densified by spark plasma sintering. Thermodynamic analysis was used to evaluate the influence of composition on the phase stability and metal segregation between phases, along with the resulting effects on microstructure and hardness. Pairing vanadium with Group IV elements (Hf, Ti, and Zr) consistently formed one boride and one carbide phase, while the Cr-V system formed a monoboride phase and a carbon-deficient carbide. Metal segregation trends depended on composition. Vanadium preferentially segregated to the …

Go to article

Hybrid Data-Driven Cement-Stabilized Soil Design: An Integration Of Machine Learning, Multi-Objective Optimization, And Life Cycle Assessment, Chikezie Chimere Onyekwena, Yunli Li, Ikenna J. Okeke, Ubani Obinna Uzodimma, Monday Uchenna Okoronkwo, Wenping Wu Feb 2026

Hybrid Data-Driven Cement-Stabilized Soil Design: An Integration Of Machine Learning, Multi-Objective Optimization, And Life Cycle Assessment, Chikezie Chimere Onyekwena, Yunli Li, Ikenna J. Okeke, Ubani Obinna Uzodimma, Monday Uchenna Okoronkwo, Wenping Wu

Chemical and Biochemical Engineering Faculty Research & Creative Works

Soil stabilization is crucial in geotechnical engineering, yet conventional methods are often time-consuming, resource-intensive, and environmentally unsustainable. Despite growing interest in Machine Learning (ML) and optimization tools for mix design, few studies integrate these methods with decision-making techniques and environmental assessment to support practical implementation. This study proposes a hybrid data-driven framework for predicting strength, optimizing mix compositions, and evaluating environmental impacts via life cycle assessment of cement-stabilized soft soils. Six ML models were evaluated, and the top-performing eXtreme Gradient Boosting (XGB) model was further improved using the Grey Wolf Optimizer (GWO). The optimized XGB-GWO model, integrated with a polynomial …

Go to article

Performance And Mechanistic Insights Into Cement Systems Modified With Wastewater-Recovered Struvite, Ugochukwu Ewuzie, Rupack R. Halder, Abdulkareem O. Yusuf, Abiodun A. Saka, Godwin I. Ogbuehi, Titus C. Egbosiuba, Damilola A. Daramola, Monday Uchenna Okoronkwo Feb 2026

Performance And Mechanistic Insights Into Cement Systems Modified With Wastewater-Recovered Struvite, Ugochukwu Ewuzie, Rupack R. Halder, Abdulkareem O. Yusuf, Abiodun A. Saka, Godwin I. Ogbuehi, Titus C. Egbosiuba, Damilola A. Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite, the stable hydration product and primary strength phase in magnesium ammonium phosphate cement (MAPC), derived from wastewater treatment, has recently been utilized as a sustainable additive to Portland cement (PC). However, its impacts on cement hydration kinetics, pore refinement, rheology, and the mechanisms underlying these processes have not been comprehensively studied. This study developed Portland cement-struvite (PCS) systems by replacing PC with 3–20 % struvite (ST wt.%: PCS3–PCS20) and evaluated these processes using isothermal calorimetry, 3D micro-computed tomography (μXCT), time-dependent rheometry, X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), and the Krstulović-Dabić (K-D) model. The FTIR/XRD confirmed the coexistence …

Go to article

Recent Advances Toward Damage-Tolerant 3d-Printed Titanium Alloys: Alloy Design Perspective, Saeid Alipour, Arezoo Emdadi, Ju Li Jan 2026

Recent Advances Toward Damage-Tolerant 3d-Printed Titanium Alloys: Alloy Design Perspective, Saeid Alipour, Arezoo Emdadi, Ju Li

Materials Science and Engineering Faculty Research & Creative Works

Twenty-year uninterrupted endeavor of titanium alloys printing has opened up a new paradigm in metal additive manufacturing (AM) to fabricate engineering components with required strength–density–corrosion combinations. Despite the remarkable advances in titanium AM, controlling the grain structure to print the parts with engineered microstructures, tailored mechanical properties, and minimum anomalies remains challenging. Numerous approaches have been implemented to address this challenge, such as printing parameter control, post-AM heat treatments, and thermomechanical processing. In addition to the aforementioned conventional approaches, novel techniques have been proposed that require employing hybrid manufacturing or developing the printer itself. One of the novel pathways in …

Go to article

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei Jan 2026

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Go to article

Elevated Temperature Flexure Behavior Of Continuous Carbon Fiber Reinforced Zrb2–Zrsi2 Ultrahigh Temperature Ceramic Matrix Composites, Jacob Stacy, Aaron Ginsparg, Jason Lonergan, Jeremy Watts, Gregory Hilmas Jan 2026

Elevated Temperature Flexure Behavior Of Continuous Carbon Fiber Reinforced Zrb2–Zrsi2 Ultrahigh Temperature Ceramic Matrix Composites, Jacob Stacy, Aaron Ginsparg, Jason Lonergan, Jeremy Watts, Gregory Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Ultrahigh temperature ceramic matrix composites (UHTCMCs) were fabricated from unidirectional prepreg tapes consisting of a matrix of ZrB2 with 5, 10, and 15 vol.% ZrSi2 additions and continuous polyacrylonitrile carbon fibers and were densified at 1600°C in a hot press. The relative matrix densities ranged from 88% to 93% with interlayer spacings of ∼72 µm and fiber volume fractions between 30% and 36%. Phenolic resin additions were utilized to react with ZrSi2 acting as a transient sintering aid to form ZrC and SiC phases. Elastic moduli of the UHTCMCs decreased with increasing temperature during 4-pt flexure testing. …

Go to article

Quantitative Grain Structure And Texture Analysis Of Hot-Pressed Zrb2 Via 3d Ebsd, Randi Swanson, Michael Chapman, Yue Zhou, Ashley Hilmas, Lisa Rueschhoff, Michael Uchic, William Fahrenholtz, Scott J. Mccormack Jan 2026

Quantitative Grain Structure And Texture Analysis Of Hot-Pressed Zrb2 Via 3d Ebsd, Randi Swanson, Michael Chapman, Yue Zhou, Ashley Hilmas, Lisa Rueschhoff, Michael Uchic, William Fahrenholtz, Scott J. Mccormack

Materials Science and Engineering Faculty Research & Creative Works

Understanding and controlling the grain structure of ZrB2 is critical for optimizing its mechanical and thermal performance in high-temperature applications. Fully dense ZrB2, densified by hot pressing at 2150˚C and 32 MPa, was analyzed in three dimensions using electron backscattered diffraction, electron and optical microscopy, and mechanical polishing serial sectioning. Grain size followed a gamma distribution, with extreme deviations observed only in the largest 0.1% of grains. Large grains exhibited plate-like morphologies, with the shortest-to-longest axis ratio converging to ∼0.4 as grain volume increased. This work revealed a crystallographically controlled growth mechanism orthogonal to [0001] that is …

Go to article

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley Jan 2026

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were …

Go to article

Simulated Lunar Gravity Testing Of A Magnetic And Electrostatic System For Beneficiating Lunar Regolith, Blake A. Coffman, Gabriel Porter, Lindsay Manteufel, Mitchell Cottrell, Jeffrey D. Smith, David J. Bayless, William Shonberg, Frank D. Han, Fateme Rezaei, Kirby Runyon Jan 2026

Simulated Lunar Gravity Testing Of A Magnetic And Electrostatic System For Beneficiating Lunar Regolith, Blake A. Coffman, Gabriel Porter, Lindsay Manteufel, Mitchell Cottrell, Jeffrey D. Smith, David J. Bayless, William Shonberg, Frank D. Han, Fateme Rezaei, Kirby Runyon

Materials Science and Engineering Faculty Research & Creative Works

We present the design and testing of a lunar regolith beneficiation device that utilizes magnetic and electrostatic separation methods to concentrate desired minerals by removing unwanted material, such as the mineral anorthite, from bulk lunar regolith. The beneficiated materials would have value for downstream in-situ resource utilization (ISRU) processes such as metal extraction, oxygen extraction, and metal oxide additive manufacturing processes. The apparatus uses a dual-strength magnet system with N52 and N42 neodymium magnets to separate particles by magnetic susceptibility. The electrostatic separation system, which acts like a sieve, sorts the regolith simulant by particle size using a single-phase 50% …

Go to article

High Temperature Diffraction From Aerodynamically Levitated Materials, Chris J. Benmore, Stephen K. Wilke, David Lipke, Richard Weber Jan 2026

High Temperature Diffraction From Aerodynamically Levitated Materials, Chris J. Benmore, Stephen K. Wilke, David Lipke, Richard Weber

Materials Science and Engineering Faculty Research & Creative Works

Aerodynamic levitation combined with laser beam heating has become an established technique for studying the structure of materials at ultra-high temperatures and under non-equilibrium conditions. This article briefly highlights some recent technical and scientific advancements in understanding the relationships between a material's behavior and its structure, investigated using diffraction methods. It focuses on three evolving frontiers: sophisticated sample environments for accessing metastable states and reactive chemistries, high-flux photon and neutron probes to reveal atomic structure, and advanced computational modeling frameworks. Free from contamination, containerless processing (levitation) can minimize heterogeneous nucleation at the interface, enabling access to deeply supercooled melts or …

Go to article

A Combined Stochastic And Physical Framework For Alloys And Metal Casting Processes Modeling, Simon N. Lekakh, Oleg Neroslavsky Jan 2026

A Combined Stochastic And Physical Framework For Alloys And Metal Casting Processes Modeling, Simon N. Lekakh, Oleg Neroslavsky

Materials Science and Engineering Faculty Research & Creative Works

High temperature metal casting processes have dualistic nature and conceptually consist of two parts of distinct processes: the first type is deterministic, strictly obeying the physical law, while the second type is stochastic. Therefore, the metal casting processes are not precisely predictable, and deterministic considerations cannot provide exact outcomes. To solve this problem, the combined stochastic and deterministic framework was suggested. The local processes were described using deterministic models for several parameter arrangements, while the distribution of these arrangements on macro level was calculated using stochastic approaches. The approach was used for cast alloy design, investment casting process optimization, and …

Go to article

Thermal Transformations And Mechanical Properties Of All-D-Metal Mn2fecu Heusler-Type Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely Jan 2026

Thermal Transformations And Mechanical Properties Of All-D-Metal Mn2fecu Heusler-Type Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely

Materials Science and Engineering Faculty Research & Creative Works

All-d-metal Heusler alloys are emerging functional materials in which magnetic ordering, lattice distortion, and mechanical behavior are strongly coupled through d–d electronic interactions. This study systematically investigates the structural, thermal, magnetic, and mechanical properties of Mn₂FeCu synthesized within a Heusler-type compositional framework. SEM/EDS revealed a dual-phase FCC-based microstructure consisting of Mn–Fe–rich and Mn–Cu–rich domains, while XRD confirmed FCC symmetry with compositional partitioning rather than full L2₁ ordering. Differential scanning calorimetry identified partial melting of the Cu-rich phase near ~ 900 °C. Dilatometry showed a thermoelastic FCC → FCT transformation at ~ 770–780 °C with a recoverable strain of ~ 0.067%. …

Go to article

First Prev Next Last