Materials Science and Engineering Commons^™

Preparation And Properties Of Phosphorus Oxynitride Glasses, Mary R. Reidmeyer

Masters Theses

"The preparation techniques and properties of phosphorus oxynitride glasses produced from sodium metaphosphate and nitride compounds are reported. A preliminary survey of possible nitride additives to sodium metaphosphate is presented along with an extended study of the two most promising nitrides, AIN and Mg₃N₂. Properties reported include: nitrogen content, dissolution rate in water, thermal expansion coefficient, softening point, glass transformation temperature, density, refractive index, microhardness, and infrared absorption"--Abstract, page 1.

The Role Of Boron In So32 And So43 Steels, Sunil S. Moghe

Masters Theses

"In this project study was conducted with the goal of understanding the role of boron involved in structure-toughness property relationship for SO32 and SO43 steels. For a standard heat-treatment of austenitizing (1 hr.) at 1700°F, water quenching and 1 hr. tempering at 1150°F SO32 steel (with 37 ppm B) lacked in toughness, while SO43 steel (with 2 ppm B) showed good toughness. In both steels all the boron was present in the form of "soluble boron" i.e., Fe₂₃ (B,C)₆ borocarbide. Experiments were carried out to study the effect of various heat treatment parameters on the precipitation behavior of …

Solid Solubility Of Sulfur In Transition Metal Oxides And Stability Of Sulfates Relevant To Roasting Processes, Zeynal Karakus

Masters Theses

"Two types of sulfur equilibration experiments were carried out in this study using either a conventional thermal gravimetric analysis (TGA) technique or a horizontal tube furnace apparatus. Samples were equilibrated with flowing SO₂-O₂ gas mixtures of either 58% SO₂ or 10% SO₂.

The types of experiments were:
1. Investigation of the extent of solid solution of sulfur in ZnO, NiO, CuO, and Fe₂O₃ over a wide range of temperature.
2. Studies of compound or solid solution formation between binary sulfate mixtures of Fe-Zn, Cu-Zn, Ni-Zn, Fe-Cr, and Cd-Zn by TGA.

The …

Oxygen Activity Dependence Of The Electrical Conductivity Of Li‐Doped Cr2o3, R. F. Huang, A. K. Agarwal, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

The electrical conductivity of Li‐doped Cr₂O₃ was investigated as a function of PO₂, temperature, and dopant content. Results show that the electrical conductivity remains almost unchanged with decreasing P O₂ in the high‐P O₂ region but decreases rapidly at low P O₂. A second phase was found in samples which contained more than 0.85 mol% Li. The results are explained by a model in which the concentration of charge carriers is dependent on the acceptor dopant and oxygen vacancy concentration. Copyright © 1984, Wiley Blackwell. All rights reserved

Ion Implantation For Improvement Of Wear Properties Of Steels, Kenneth W. Burris

Masters Theses

"Previous research on ion implantation at U.M.R. has dealt with the development of a modified Falex Lubricant Tester as a valid wear test and its use in dose curve determination. Our recent work uses Auger surface analysis and scanning electron microscopy to gather support for a model that will tie together some of the many theories proposed as to why ion-implantation improves the surface related mechanical properties of steels"--Abstract, page ii.

Defect Structure Of Mg‐Doped Lacro3 Model And Thermogravimetric Measurements, B. K. Flandermeyer, M. M. Nasrallah, A. K. Agarwal, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

Chemical stability and cation stoichiometry determine the applicability of LaCrO₃ as a high‐temperature oxide electrode. A model for the behavior of acceptor‐doped LaCrO₃, as a function of oxygen activity is proposed. The model is in agreement with experimental data on Mg‐doped LaCrO₃. Stability regimes and compensation mechanisms at various oxygen activities and temperature are presented. Copyright © 1984, Wiley Blackwell. All rights reserved

Dynamics Of Stress Induced Hydride Formation In Vanadium, Alex Aning, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Dynamics Of Twinning In Natural Α-Quartz, Alexander Aning, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

Finite amplitude internal friction experiments in α-quartz are described and interpreted in terms of the theory of nonlinear anelasticity. The theory predicts a linear relationship between the driving force of the excitation and the period of the auto modulation at its onset. This relation is substantiated by experiments performed with a natural α-quartz reed vibrating in flexure at resonance frequencies between 65 and 170 Hz in the temperature range of 162° and 224°C. The data suggests that Dauphiné twinning in α-quartz causes the auto modulation governed by an activation energy of 92 kJ mole. This activation energy characterizes short distance …

Non-Linear Oscillation, Automodulation And Anelasticity, Tetsuro Suzuki, Manfred Wuttig

Physics Faculty Research & Creative Works

The auto modulation observed in the course of internal friction is discussed as a special example of the universal nature of non-linear oscillations. Universal features of non-linear oscillations are the requirement of energy supply or negative damping and the period doubling route to chaos. The negative damping responsible for the auto modulation is described in terms of the soliton model for twinning deformation. © 1984 The Japan Society of Applied Physics.

Thermogravimetric And Electrical Conductivity Studies Of Mg-Doped Lacro₃ And La-Doped Srtio₃, Brian Keith Flandermeyer

Doctoral Dissertations

"Mg-doped LaCrO₃ and La-doped SrTiO₃ are perovskite compounds that display electrical conductivity which is a function of partial pressure of oxygen (po2). It has been proposed that acceptor-doped LaCrO₃ becomes highly resistive at low po2's due to ionic compensation of the acceptor-dopant present by oxygen vacancies. SrTiO₃ has been thought to absorb O₂ into a crystallographic shear structure and exsolve strontium vacancies which can then ionically compensate the La present and give a high resistance at high po2's.

Given these models, relationships between weight loss and conductivity vs. po₂ are developed for both these …

Thermally Stimulated Current Studies Of Barium Titanate Capacitors, Patrick Donald Martin

Masters Theses

"Thermally stimulated polarization current (TSPC) and thermally stimulated depolarization current (TSDC) measurements were used to study sample current behavior based on the thermally activated release of trapped charges and polarization mechanisms. Samples studied included laboratory-prepared barium titanate samples (the barium to titanium ratio ranging from 0.96 to 1.04) and commercial ceramic capacitors. Both TSPC and TSDC showed the current spectra of the barium titanate samples were a function of crystal structure and the Ba/Ti ratio. The TSPC/TSDC results of the ceramic capacitors showed differences between capacitor formulations. TSPC/TSDC results also showed differences between good capacitors (physically and electrically) and capacitors …

Electrogalvanizing And Drawing Of Steel Wires, Thomas Joseph O'Keefe Jr.

Masters Theses

"The effects of varying current density, temperature, Zn⁺² and licorice concentrations on the morphology of the zinc deposited on steel wire have been studied and compared. The plated wires were then drawn and evaluated in terms of required drawing energy and zinc loss during processing of up to 40% reduction in area. Scanning electron microscope and X-ray diffraction were used to evaluate the electrodeposits"--Abstract, page ii.

The Effects Of Certain Impurities And Their Interactions On Zinc Electrowinning, Donald R. Fosnacht, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

The effects of germanium, antimony, arsenic, cobalt, glue, and free acid concentration were studied on both commercial and synthetic electrolytes. The effects of a single factor and the combined effects of multiple factors were elucidated. The temperature, zinc concentration, and current density were varied for some of the tests. It was found that the acid content was the most critical factor when impurity levels were at normal plant solution concentrations. The ranges where the effect of the impurity became apparent were: greater than 20 ppb (parts per billion) for antimony; 40 ppb for germanium; 120 ppb for arsenic; and 7 …

Screening Design Test For Cobalt Cementation From Zinc Electrolyte, Mark S. Blaser, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Control Of Oxygen And Carbon Related Crystal Defects In Silicon Processing, P. D. Ownby, P. E. Grayson

Materials Science and Engineering Faculty Research & Creative Works

In the production of silicon articles at an elevated temperature, a stream comprising a controlled mixture of an oxygen-containing first gas and a second gas is admitted to the processing chamber. The first gas is one which partially dissociates under the conditions in the chamber to form both oxygen and the second gas. The second gas is one which is not harmful to silicon at the conditions in the chamber. Substantially equilibrium conditions are established in the chamber so that the dissociation of the first gas to oxygen occurs reversibly. The partial pressure of oxygen (P_O2) is sensed …

Mechanical Properties Of Alumina For Orthopedic Implant Use, Ho Tong Fang

Masters Theses

"The static fatigue, flexural strength and chemical corrosion of three commercially prepared, polycrystalline aluminas, two of orthopedic implant grade, were measured in demineralized water at 37°C and 70°C. The dissolution of a Ca-rich impurity phase, probably a glass, segregated at the grain boundaries and external surface, appears at least partially responsible for the significant difference in static fatigue of these three aluminas. The present results indicate that the minimum static fatigue in demineralized water, and the highest flexural strength in demineralized water and HF solution are both achieved by the alumina characterized by a low concentration of Ca at the …

Development Of Glass Microspheres For Radiotherapeutic Applications, Thomas A. Wetteroth

Masters Theses

"Oxide glasses make excellent candidates for radiotherapeutic microspheres used in liver cancer treatment because of their generally high chemical durability and safety of manufacture. From the compositions containing ~5 wt% P₂O₅ studied, magnesium alumino silicate glass microspheres and magnesium alkali silicate glass microspheres with 4 wt% ZrO₂ had acceptably low releases of both elemental phosphorus in deionized water at 50°C, and radioactive ³²P in human blood plasma at 37°C. The relative ranking of glass compositions in the elemental phosphorus leach test shows good agreement with the rankings of compositions in the radioactive ³²P leach …

The Influence Of Additives And Their Interactions On Copper Electrorefining, Chwan-Tsann Wang

Doctoral Dissertations

"Protein colloid (glue), thiourea, Avitone and chloride ion are the most common additives used electrorefining copper. The polarization behavior of these additives, single and combined, was studied by cyclic voltammetry techniques in conjunction with stationary and rotating disc electrodes. In the stationary electrode work, different protein colloids give substantially different results in polarization or interaction with other additives. The role played by Avitone is not clear, but it does somewhat modify other additives in the electrolyte. Thiourea can cause a depolarized peak and a polarized plateau depending on the concentration, the other additives present and the potential selected. Chloride ion …

Glass Formation And Properties In The Gallia-Calcia System, Glenn Whichard

Masters Theses

“The critical cooling rate for glass formation for melts containing from 37.5 to 68.0 mol % Ga₂O₃ varied from 310 ± 80°C/s to 855 ± 115°C/s. The crystallization temperature, microhardness, UV and visible transmission were measured. The density increased from 4.075 g/cm³ at 37.5 3 mol % Ga₂O₃ to 4.402 g/cm³ at 56.0 mol % Ga₂O₃. The refractive index, n_D, increased from 1.778 at 37.5 mol % Ga₂O₃ to 1.802 at 62.0 mol % Ga₂O₃. The IR spectra indicate …

Sintering Of Lif-Fluxed Srtio₃, Marie-Christine P. Proudian

Masters Theses

"Lithium fluoride (LiF) is used to enhance the sinterability of perovskites, as it results in the formation of a liquid phase. In this study, the mechanism and kinetics of sintering for LiF-fluxed strontium titanate (SrTiO₃) were investigated. The Sr/Ti ratio was varied between 0.98 and 1.03, and the LiF content in the green compact ranged from 0.5 to 2.0 weight percent. Sintering was conducted at temperatures between 695° and 925°C for isothermal dilatometric shrinkage measurements for time intervals of 6000 seconds or less. Weight loss, shrinkage, density and porosity measurements were conducted on samples isothermally sintered between 690° …

Preface, Delbert E. Day, Günther H. Frischat

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Comments On A Paper By Baik And Raj, Hollis P. Leighly

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Twinning Pseudoelasticity In Intl, Manfred Wuttig, Lin Chun-Hung

Materials Science and Engineering Faculty Research & Creative Works

Twin boundaries generally contribute significantly to the damping of a twinned crystal. In an In-19.1 at.% Tl single crystal the damping gives rise to auto modulation if the internal friction studies are performed in the 10 Hz frequency range, with a strain amplitude larger than 0.05 and at temperatures lower than 10°C. The frequency of the auto modulation is about 60 times slower than the frequency with which the reed type sample is driven. The auto modulation frequency has a maximum at -6 C and is characterized by an activation energy of 29 kJ/mol (7 kcal/mol). This maximum can be …

Separation Of Mineral Particles In Cyclones Under The Influence Of A Magnetic Field, Kwasi Amoako-Gyampah

Masters Theses

"The separation of mineral particles in a cyclone under the influence of a magnetic field was investigated using an electromagnetic - cyclone arrangement. Feed pulps of dolomite and magnetite were used in the study. Two different cyclone types were investigated: An air-type cyclone arrangement and a conventional cyclone arrangement. Magnetic field strengths of 0 to 3000 gauss (0 - 0.3 Tesla) were used in the study by varying the current through the coils of the electromagnet .

The parameters evaluated in the study were the grades and recoveries of the magnetic concentrates produced, the enrichment ratios, the improvement in recoveries …

The Effect Of Selected Alloying Elements On The Hardness And Microstructure Of Ductile Cast Iron, Chi-Hua Edward Tseng

Masters Theses

The effects of cooling rate and alloying element on the matrix structure, nodule count and hardness have been studied in this investigation.

Recommendations for producing ferritic ductile iron have been made and the relationship between hardness and pearlite percentage has been obtained in this study.

Defect Chemistry Of La-Doped Strontium Titanate, Brian Keith Flandermeyer

Masters Theses

"Thermogravimetric measurements as a function of oxygen activity were performed in the temperature range of 1200°C to 1400°C on a series of La-doped SrTiO₃ compounds. A model postulating the crystallographic accommodation of ionic defects induced by the donor under oxidizing conditions is assumed. Thermodynamic calculations were performed to compare this model to the experimental results with reasonable success"--Abstract, page iii.

Nonlinear Anelasticity Of Magnesium, Alexander Aning, Tetsuro Suzuki, Manfred Wuttig

Physics Faculty Research & Creative Works

An approximate solution of the equation of motion of a nonlinear anelastic reed at or near resonance is presented. The steady state solution reproduces the well-known nonlinear resonances. The solution also predicts the existence of auto modulations, i.e., self-excited modulations of the amplitude and phase at constant power of excitation of the reed. Numerical examples of such auto modulations are presented for an antisymmetric deformation potential. Experimental studies of finite amplitude oscillations of a magnesium reed vibrating at 72 and 431 Hz at room temperature confirm the existence of auto modulations. The experimental results can be semi quantitatively described in …

Factors Influencing The Production Rate And Quality Of Lead Sinter, John R. Knoepke, Hung Yang Tsai, Arthur E. Morris

Materials Science and Engineering Faculty Research & Creative Works

The sintering characteristics of a typical Missouri lead concentrate were determined for two types of raw sinter mix: conventionally prepared and pelletized. The important sintering characteristics are sulfur elimination, sinter strength, production rate of sinter, permeability of the sinter bed, and bed temperature. These characteristics were analyzed statistically, and are described by an empirical model, in which proportion of returns, moisture content, air flow, bed height, size distribution of returns, and ignition time are the independent variables. The characteristics of a conventionally prepared sinter mix are most strongly affected by the moisture content of the raw mix. The characteristics of …

The Influence Of Manganese Oxide On Sintering Of A Commercial Natural Magnesite., Alamar Kasan Duarte

Masters Theses

"Sintering studies on a commercial natural magnesite have been done to investigate the influence of MnO doping (MnO concentration from 0.16 to 2.50 wt.%) on the densification process over the temperature range 1520 to 1760°C , over periods of time from 3,600 to 57,600s in both oxidizing and reducing atmospheres (Air and P_O2 = 10^-7 KPa. In an air atmosphere the additions of MnO enhances the densification process. This fact may be associated with an increase in lattice diffusion of Mg ions due to an increase in cation vacancies in the MgO lattice from the presence of …

Drawing Characteristics Of Electrogalvanized Steel Wires., Chi-Yuan Tsao

Masters Theses

"As a means of investigating the often adverse drawing behavior of electrogalvanized steel wire, drawing experiments were conducted on a variety of industrially-supplied and laboratory-prepared electroplated steel wires. Back-flow and shaving appeared to be the mechanisms by which sizeable zinc losses occurred. Performance during drawing and the quality of the product depended upon both the characteristics of the plating and the drawing process variables. Grain size, grain texture, and surface 'flatness' can affect the required drawing force, surface finish and level of zinc retention. Low die angles and large reductions offered greatest efficiencies with minimum zinc loss"--Abstract p. ii