Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Michigan Technological University

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 61 - 90 of 318

Full-Text Articles in Materials Science and Engineering

Carbohydrates Generated Via Hot Water As Catalyst For Co2 Reduction Reaction, Yang Yang, Heng Zhong, Jiong Cheng, Yun Hang Hu, Richard Lee Smith Jr, Fangming Jin Sep 2023

Carbohydrates Generated Via Hot Water As Catalyst For Co2 Reduction Reaction, Yang Yang, Heng Zhong, Jiong Cheng, Yun Hang Hu, Richard Lee Smith Jr, Fangming Jin

Michigan Tech Publications

Combining terrestrial biomass with submarine-type hydrothermal environments for CO2 reduction is a possible approach for realizing new energies while achieving sustainable circulation of carbon. Herein, carbohydrateenabled CO2 reduction based on NaHCO3 conversion to formate revealed that hydrothermal environments facilitated direct hydrogen transfer from carbohydrates (glucose, cellulose) to CO2/NaHCO3 with hot water (250–300 °C, 5–20 MPa) acting as homogeneous catalyst in absence of any conventional catalysts giving CO2/ NaHCO3 reduction efficiencies as high as 76% for cellulose. Time-resolved operando hydrothermal DRIFTS spectra of glycolaldehyde in hot water (250 °C, autogenous pressure) verified that water catalyzed NaHCO3 reduction by converting the -CHO …

Go to article

Establishing Physical And Chemical Mechanisms Of Polymerization And Pyrolysis Of Phenolic Resins For Carbon-Carbon Composites, Ivan Gallegos, Josh Kemppainen, Jacob R. Gissinger, Malgorzata Kowalik, Adri Van Duin, Kristopher E. Wise, S. Gowtham, Gregory Odegard Sep 2023

Establishing Physical And Chemical Mechanisms Of Polymerization And Pyrolysis Of Phenolic Resins For Carbon-Carbon Composites, Ivan Gallegos, Josh Kemppainen, Jacob R. Gissinger, Malgorzata Kowalik, Adri Van Duin, Kristopher E. Wise, S. Gowtham, Gregory Odegard

Michigan Tech Publications

The complex structural and chemical changes that occur during polymerization and pyrolysis critically affect material properties but are difficult to characterize in situ. This work presents a novel, experimentally validated methodology for modeling the complete polymerization and pyrolysis processes for phenolic resin using reactive molecular dynamics. The polymerization simulations produced polymerized structures with mass densities of 1.24 ± 0.01 g/cm3 and Young's moduli of 3.50 ± 0.64 GPa, which are in good agreement with experimental values. The structural properties of the subsequently pyrolyzed structures were also found to be in good agreement with experimental X-ray data for the phenolic-derived carbon …

Go to article

Magnesium-Based Nanocomposites: A Review From Mechanical, Creep And Fatigue Properties, S. Abazari, A. Shamsipur, H. R. Bakhsheshi-Rad, J. W. Drelich, J. Goldman, S. Sharif, A. F. Ismail, M. Razzaghi Aug 2023

Magnesium-Based Nanocomposites: A Review From Mechanical, Creep And Fatigue Properties, S. Abazari, A. Shamsipur, H. R. Bakhsheshi-Rad, J. W. Drelich, J. Goldman, S. Sharif, A. F. Ismail, M. Razzaghi

Michigan Tech Publications

The addition of nanoscale additions to magnesium (Mg) based alloys can boost mechanical characteristics without noticeably decreasing ductility. Since Mg is the lightest structural material, the Mg-based nanocomposites (NCs) with improved mechanical properties are appealing materials for lightweight structural applications. In contrast to conventional Mg-based composites, the incorporation of nano-sized reinforcing particles noticeably boosts the strength of Mg-based nanocomposites without significantly reducing the formability. The present article reviews Mg-based metal matrix nanocomposites (MMNCs) with metallic and ceramic additions, fabricated via both solid-based (sintering and powder metallurgy) and liquid-based (disintegrated melt deposition) technologies. It also reviews strengthening models and mechanisms that …

Go to article

Conventional Platinum Metal Implants Provoke Restenosis Responses In Atherogenic But Not Healthy Arteries, Lea M. Morath, Roger J. Guillory Ii, Alexander A. Oliver, Shu Q. Liu, Martin L. Bocks, Galit Katarivas Levy, Jaroslaw Drelich, Jeremy Goldman Jun 2023

Conventional Platinum Metal Implants Provoke Restenosis Responses In Atherogenic But Not Healthy Arteries, Lea M. Morath, Roger J. Guillory Ii, Alexander A. Oliver, Shu Q. Liu, Martin L. Bocks, Galit Katarivas Levy, Jaroslaw Drelich, Jeremy Goldman

Michigan Tech Publications, Part 1

Platinum-containing stents are commonly used in humans with hypercholesterolemia, whereas preclinical stent evaluation has commonly been performed in healthy animal models, providing inadequate information about stent performance under hypercholesterolemic conditions. In this investigation, we used an ApoE−/− mouse model to test the impact of hypercholesterolemia on neointima formation on platinum-containing implants. We implanted 125 μm diameter platinum wires into the abdominal aortas of ApoE−/− and ApoE+/+ mice for 6 months, followed by histological and immunofluorescence examination of neointimal size and composition. It was found that ApoE−/− mice developed neointimas with four times larger area and ten times greater thickness than …

Go to article

Material Design And Performance Of Carbon Monoxide-Fueled Solid Oxide Fuel Cells: A Review, Wei Zhang, Yun Hang Hu Jun 2023

Material Design And Performance Of Carbon Monoxide-Fueled Solid Oxide Fuel Cells: A Review, Wei Zhang, Yun Hang Hu

Michigan Tech Publications, Part 1

Solid oxide fuel cells (SOFCs) are electrochemical energy conversion devices with fuel flexibility. Since carbon monoxide (CO) is a major product of SOFC anodes operating with hydrocarbon fuels, direct utilization of CO as a fuel is expected for more efficient operation of SOFCs. A review on CO-fueled SOFC technologies is imperative to promote research activities in this important field, but it has not been published. In this review, we summarize and comment on literatures in this field, with respect to (1) materials developed for three fundamental components (anode, cathode, and electrolyte), (2) power output and stabilization strategies, and (3) critical …

Go to article

Turning Dead Leaves Into An Active Multifunctional Material As Evaporator, Photocatalyst, And Bioplastic, Siyuan Fang, Xingyi Lyu, Tian Tong, Aniqa Ibnat Lim, Tao Li, Jiming Bao, Yun Hang Hu Mar 2023

Turning Dead Leaves Into An Active Multifunctional Material As Evaporator, Photocatalyst, And Bioplastic, Siyuan Fang, Xingyi Lyu, Tian Tong, Aniqa Ibnat Lim, Tao Li, Jiming Bao, Yun Hang Hu

Michigan Tech Publications, Part 1

Large numbers of leaves fall on the earth each autumn. The current treatments of dead leaves mainly involve completely destroying the biocomponents, which causes considerable energy consumption and environmental issues. It remains a challenge to convert waste leaves into useful materials without breaking down their biocomponents. Here, we turn red maple dead leaves into an active three-component multifunctional material by exploiting the role of whewellite biomineral for binding lignin and cellulose. Owing to its intense optical absorption spanning the full solar spectrum and the heterogeneous architecture for effective charge separation, films of this material show high performance in solar water …

Go to article

Austenite Formation And Manganese Partitioning During Double Soaking Of An Ultralow Carbon Medium-Manganese Steel, Josh J. Mueller, Alexandra G. Glover, David K. Matlock, John G. Speer, Emmanuel De Moor Mar 2023

Austenite Formation And Manganese Partitioning During Double Soaking Of An Ultralow Carbon Medium-Manganese Steel, Josh J. Mueller, Alexandra G. Glover, David K. Matlock, John G. Speer, Emmanuel De Moor

Michigan Tech Publications, Part 1

Double soaking (DS) is a thermal processing route intended to produce austenite–martensite microstructures in steels containing austenite-stabilizing additions and consists of intercritical annealing (primary soaking), followed by heating and brief isothermal holding at an increased temperature (secondary soaking), and quenching. Herein, experimental dilatometry during DS of a medium-manganese (Mn) steel with nominally 7 wt% Mn and an ultralow residual carbon concentration, in combination with phase-field simulations of austenite formation during secondary soaking, is presented. The feasibility of maintaining heterogeneous Mn distributions during DS is demonstrated and insight is provided on the effects of the secondary soaking temperature and prior Mn …

Go to article

Can Grid-Tied Solar Photovoltaics Lead To Residential Heating Electrification? A Techno-Economic Case Study In The Midwestern U.S., Nelson Sommerfeldt, Joshua M. Pearce Feb 2023

Can Grid-Tied Solar Photovoltaics Lead To Residential Heating Electrification? A Techno-Economic Case Study In The Midwestern U.S., Nelson Sommerfeldt, Joshua M. Pearce

Michigan Tech Publications, Part 1

This study aims to quantify the techno-economic potential of using solar photovoltaics (PV) to support heat pumps (HP) towards the replacement of natural gas heating in a representative North American residence from a house owner's point of view. For this purpose, simulations are performed on: (1) a residential natural gas-based heating system and grid electricity, (2) a residential natural gas-based heating system with PV to serve the electric load, (3) a residential HP system with grid electricity, and (4) a residential HP+PV system. Detailed descriptions are provided along with a comprehensive sensitivity analysis for identifying specific boundary conditions that enable …

Go to article

Temperature, Pressure, And Adsorption Dependent Redox Potentials: Iii. Processes Of Co Conversion To Value-Added Compounds, Siyuan Fang, Yun Hang Hu Jan 2023

Temperature, Pressure, And Adsorption Dependent Redox Potentials: Iii. Processes Of Co Conversion To Value-Added Compounds, Siyuan Fang, Yun Hang Hu

Michigan Tech Publications, Part 1

Carbon monoxide (CO) is a primary air pollutant and a poisonous species for human beings, animals, and some catalytic reactions. Meanwhile, CO is also a versatile feedstock in the chemical industry to produce high‐value chemicals and clean fuels, which has stimulated extensive research interests in exploiting efficient CO conversion processes. Redox potential is a key thermodynamic quantity in these processes whereas only standard reduction potentials at 25°Cand 1 atm are currently available. Herein, it is the first time to report the effects of temperature (0–1000°C), pressure (1–100 atm), and adsorption on the redox potentials of 18 CO conversion reactions to …

Go to article

Stability Of Linicoal-Oxide Electrode Material Under High-Temperature Ceramic Fuel Cell Conditions, Wei Zhang Jan 2023

Stability Of Linicoal-Oxide Electrode Material Under High-Temperature Ceramic Fuel Cell Conditions, Wei Zhang

Dissertations, Master's Theses and Master's Reports

LiNi0.8Co0.15Al0.05O2 (LNCA) is an important cathode material for room-temperature operation of lithium-ion batteries (LIBs). As an emerging research area, LNCA was recently applied as electrodes (both cathode and anode) for high-temperature ceramic fuel cells (CFCs) with impressive performances. However, the stability of LNCA electrode material under CFC operating conditions (i.e., reactive atmospheres and high temperatures) remains unknown. In this dissertation: (1) The stability of LNCA in air and H2 atmospheres was systematically evaluated at elevated temperatures (i.e., the operating electrode environments of H2-fueled CFCs). It was found that LNCA exhibited excellent stability in air within a wide temperature range from …

Go to article

Fabrication And Optical Properties Of Two-Dimensional Transition Metal Dichalcogenides, Manpreet Boora Jan 2023

Fabrication And Optical Properties Of Two-Dimensional Transition Metal Dichalcogenides, Manpreet Boora

Dissertations, Master's Theses and Master's Reports

Two-dimensional layered materials such as graphene and transition metal dichalcogenides have gained a lot of attention because of their distinctive chemical, optical, and electronic properties. Transition metal dichalcogenides can have a tunable bandgap in the range of 1 − 3 eV (visible), which enables their applications in ultrathin field effect transistors, photovoltaics, sensors, and optoelectronic devices. They exhibit an indirect-to-direct band gap transition when thinned down from bulk to a single layer. They show strong photoluminescence, electron–photon interaction, valley pseudospin, nonlinear optical response, and lack of dangling bonds. Many exotic phenomena appear when materials are thinned to nanoscale size because …

Go to article

Study Of Nanocomposite Materials Using Molecular Dynamics, Prashik Sunil Gaikwad Jan 2023

Study Of Nanocomposite Materials Using Molecular Dynamics, Prashik Sunil Gaikwad

Dissertations, Master's Theses and Master's Reports

There is an increase in demand for new lightweight structural materials in the aerospace industry for more efficient and affordable human space travel. Polymer matrix composites (PMCs) with reinforcement material as carbon nanotubes (CNTs) have shown exceptional increase in the mechanical properties. Flattened carbon nanotubes (flCNTs) are a primary component of many carbon nanotube (CNT) yarn and sheet materials, which are promising reinforcements for the next generation of ultra-strong composites for aerospace applications. These flCNT/polymer materials are subjected to extreme pressure and temperature during curing process. Therefore there is a need to investigate the evolution of properties during the curing …

Go to article

Size Distribution, Elemental Composition And Morphology Of Nanoparticles Separated From Respirable Coal Mine Dust, Shoeleh Assemi, Lei Pan, Xuming Wang, Titilayo Akinseye, Jan D. Miller Jan 2023

Size Distribution, Elemental Composition And Morphology Of Nanoparticles Separated From Respirable Coal Mine Dust, Shoeleh Assemi, Lei Pan, Xuming Wang, Titilayo Akinseye, Jan D. Miller

Michigan Tech Publications, Part 1

Nanoparticles, defined as particles with one dimension below 100 nm, contribute little to the total mass concentration in respirable coal mine dust (RCMD) toxicological studies, but they could have a considerable part in the adverse health effects by RCMD inhalation. It has been shown that inhaled nanoparticles can penetrate deep into the lung and could plausibly contribute to acute and chronic pulmonary diseases by triggering oxidative stress formation and inducing inflammation. RCMD nanoparticles from samples collected in an underground mine in the United States were analyzed by a particle separation technique, field-flow fractionation (FFF), for size, morphology, and elemental composition. …

Go to article

Effect Of Sc On Recrystallization Resistance Of Aa7050, Keaton Schmidt Jan 2023

Effect Of Sc On Recrystallization Resistance Of Aa7050, Keaton Schmidt

Dissertations, Master's Theses and Master's Reports

The extrusion process involves high temperatures and strains that can result in undesirable microstructures, especially along the surface. Extruded alloys tend to exhibit surface recrystallization during heat treating at regions of higher strains, which can lead to reduced fatigue strength and corrosion resistance. By adding Sc to AA7050, nano-sized dispersoids are formed with Sc cores and Zr shells that restrict recrystallization more than the base alloy that only utilizes Zr. Billets with varying Sc content and a control with only Zr were cast, and extrusions were made in order to compare surface microstructures at varying strains in the as-extruded and …

Go to article

Quantifying The Evolution Of Strengthening Mechanisms For Commercially Produced Niobium And Titanium Hsla Steel Sheet, Isabella M.W. Jaszczak Jan 2023

Quantifying The Evolution Of Strengthening Mechanisms For Commercially Produced Niobium And Titanium Hsla Steel Sheet, Isabella M.W. Jaszczak

Dissertations, Master's Theses and Master's Reports

Strength uniformity along the coil length of commercially produced high-strength, low-alloy (HSLA) steel hot-rolled sheet is crucial to avoid the downgrading of product that does not meet strength specifications. In addition to contributing to precipitation strengthening through the growth of niobium-titanium carbides ((Nb,Ti)-C), niobium hinders austenite recrystallization and refines ferrite grain size. The potency of these strengthening mechanisms relies heavily on the austenite to ferrite transformation kinetics of the hot-rolling process. While niobium’s effect on precipitation strengthening, Hall-Petch strengthening, dislocation strengthening, and solute strengthening have all been studied in literature independently, the interactions of these mechanisms with each other and …

Go to article

Optimizing The Extrudability Of 6082 Aluminum By Varying The Magnesium And Silicon Concentration, Eli A. Harma Jan 2023

Optimizing The Extrudability Of 6082 Aluminum By Varying The Magnesium And Silicon Concentration, Eli A. Harma

Dissertations, Master's Theses and Master's Reports

Alloy 6082 aluminum is used for high-volume manufacturing in the automotive industry due to its high strength, impact performance, and corrosion resistance. However, given these improved properties, the alloy has decreased formability compared to other 6xxx series alloys, especially in the extrusion process. Controlling the dynamic recovery and recrystallization properties by changing the additions of Mg and Si can improve the hot deformation properties. Five alloys of varying Mg and Si concentrations between 0.6 to 1.2wt% Mg and 0.7 to 1.3wt% Si were made with constant concentrations of Cr, Fe, and Mn and the same homogenization heat treatment. The proposed …

Go to article

Nanomaterials For Cardiovascular Engineering, Roya Bagheri Jan 2023

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

Go to article

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane Jan 2023

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane

Dissertations, Master's Theses and Master's Reports

Polymer matrix composite materials are widely used as structural materials in aerospace and aeronautical vehicles. Resin/reinforcement wetting and the effect of polymerization on the thermo-mechanical properties of the resin are key parameters in the manufacturing of aerospace composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. It is challenging to determine contact angle values experimentally of high-performance resins on CNT materials such as CNT, graphene, bundles or yarns, and BNNT surfaces. It is also experimentally difficult to determine the effect of polymerization reaction on material properties of a …

Go to article

Conductive 3d Nano-Biohybrid Systems Based On Densified Carbon Nanotube Forests And Living Cells, Roya Bagheri, Alicia K. Ball, Masoud Kasraie, Aparna Chandra, Xinqian Chen, Ibrahim Miskioglu, Zhiying Shan, Parisa Pour Shahid Saeed Abadi Jan 2023

Conductive 3d Nano-Biohybrid Systems Based On Densified Carbon Nanotube Forests And Living Cells, Roya Bagheri, Alicia K. Ball, Masoud Kasraie, Aparna Chandra, Xinqian Chen, Ibrahim Miskioglu, Zhiying Shan, Parisa Pour Shahid Saeed Abadi

Michigan Tech Publications

Conductive biohybrid cell-material systems have applications in bioelectronics and biorobotics. To date, conductive scaffolds are limited to those with low electrical conductivity or 2D sheets. Here, 3D biohybrid conductive systems are developed using fibroblasts or cardiomyocytes integrated with carbon nanotube (CNT) forests that are densified due to interactions with a gelatin coating. CNT forest scaffolds with a height range of 120–240 µm and an average electrical conductivity of 0.6 S/cm are developed and shown to be cytocompatible as evidenced from greater than 89% viability measured by live-dead assay on both cells on day 1. The cells spread on top and …

Go to article

Fluid Droplet Spreading And Adhesion Studied With A Microbalance: A Review, Youhua Jiang, Jaroslaw Drelich Nov 2022

Fluid Droplet Spreading And Adhesion Studied With A Microbalance: A Review, Youhua Jiang, Jaroslaw Drelich

Michigan Tech Publications, Part 1

A contact angle observed for a liquid–solid system is not necessarily a unique value, and a few contact angles need to be considered carefully in relation to liquid spreading, adhesion and phase separation. Understanding of the significance of different contact angles has improved in the last few years through direct measurements of interactive forces between droplets/bubbles and solids together with the simultaneous visualization of the changes in their shapes. A microelectronic balance system is employed to measure the force of spreading after either liquid droplet or gas bubble attachment to a substrate surface and the droplet/bubble–substrate adhesion forces after droplet/bubble …

Go to article

Carbonate-Superstructured Solid Fuel Cells With Hydrocarbon Fuels, Hanrui Su, Wei Zhang, Yun Hang Hu Oct 2022

Carbonate-Superstructured Solid Fuel Cells With Hydrocarbon Fuels, Hanrui Su, Wei Zhang, Yun Hang Hu

Michigan Tech Publications, Part 1

A basic requirement for solid oxide fuel cells (SOFCs) is the sintering of electrolyte into a dense impermeable membrane to prevent the mixing of fuel and oxygen for a sufficiently high open-circuit voltage (OCV). However, herein, we demonstrate a different type of fuel cell, a carbonate-superstructured solid fuel cell (CSSFC), in which in situ generation of superstructured carbonate in the porous samarium-doped ceria layer creates a unique electrolyte with ultrahigh ionic conductivity of 0.17 S.cm21 at 550 °C. The CSSFC achieves unprecedented high OCVs (1.051 V at 500 °C and 1.041 V at 550 °C) with methane fuel. Furthermore, the …

Go to article

Development Of High-Performance Fiber Cement: A Case Study In The Integration Of Circular Economy In Product Design, Parinya Chakartnarodom, Sarunya Wanpen, Wichit Prakaypan, Edward A. Laitila, Nuntaporn Kongkajun Sep 2022

Development Of High-Performance Fiber Cement: A Case Study In The Integration Of Circular Economy In Product Design, Parinya Chakartnarodom, Sarunya Wanpen, Wichit Prakaypan, Edward A. Laitila, Nuntaporn Kongkajun

Michigan Tech Publications, Part 1

A new fiber cement (FC) is designed with the integration of circular economy (CE) concepts, in particular a product that is recyclable yet maintains performance. The FC samples were prepared from the mixtures of ordinary Portland cement (OPC), sand, and cellulose fibers, and required an inclusion compound (IC) and water. From the heat of hydration tests, the most effective IC, IC1, was prepared from lithium silicate, sodium thiocyanate, alkylbenzene sulfonate, and hydrochloric acid. The FC samples were recycled by crushing and grinding, then used as sand replacement in varying amounts to produce new FC samples. The results from the mechanical …

Go to article

Thermal Post-Processing Of 3d Printed Polypropylene Parts For Vacuum Systems, Pierce Mayville, Aliaksei L. Petsiuk, Joshua M. Pearce Sep 2022

Thermal Post-Processing Of 3d Printed Polypropylene Parts For Vacuum Systems, Pierce Mayville, Aliaksei L. Petsiuk, Joshua M. Pearce

Michigan Tech Publications, Part 1

Access to vacuum systems is limited because of economic costs. A rapidly growing approach to reduce the costs of scientific equipment is to combine open-source hardware methods with digital distributed manufacturing with 3D printers. Although high-end 3D printers can manufacture vacuum components, again, the cost of access to tooling is economically prohibitive. Low-cost material extrusion 3D printing with plastic overcomes the cost issue, but two problems arise when attempting to use plastic in or as part of vacuum systems: the outgassing of polymers and their sealing. To overcome these challenges, this study explores the potential of using post-processing heat treatments …

Go to article

Do Agrivoltaics Improve Public Support For Solar? A Survey On Perceptions, Preferences, And Priorities, Alexis Pascaris, Chelsea Schelly, Mark Rouleau, Joshua Pearce Aug 2022

Do Agrivoltaics Improve Public Support For Solar? A Survey On Perceptions, Preferences, And Priorities, Alexis Pascaris, Chelsea Schelly, Mark Rouleau, Joshua Pearce

Michigan Tech Publications, Part 1

Agrivoltaic systems integrate agricultural production with solar photovoltaic electricity generation. Given the proven technical, economic, and environmental co-benefits provided by agrivoltaic systems, increased proliferation is anticipated, which necessitates accounting for the nuances of community resistance to solar development on farmland and identifying pathways for mitigation. Minimizing siting conflict and addressing agricultural communities’ concerns will be key in continued deployment of agrivoltaics, as localized acceptance of solar is a critical determinant of project success. This survey study assessed if public support for solar development increases when energy and agricultural production are combined in an agrivoltaic system. Results show that 81.8% of …

Go to article

Utilization Of Bayesian Optimization And Kwn Modeling For Increased Efficiency Of Al‐Sc Precipitation Strengthening, Kyle Deane, Yang Yang, Joseph Licavoli, Vu Nguyen, Santu Rana, Sunil Gupta, Svetha Venkatesh, Paul G. Sanders Jun 2022

Utilization Of Bayesian Optimization And Kwn Modeling For Increased Efficiency Of Al‐Sc Precipitation Strengthening, Kyle Deane, Yang Yang, Joseph Licavoli, Vu Nguyen, Santu Rana, Sunil Gupta, Svetha Venkatesh, Paul G. Sanders

Michigan Tech Publications, Part 1

The Kampmann and Wagner numerical model was adapted in MATLAB to predict the precipitation and growth of Al3Sc precipitates as a function of starting concentration and heat‐treatment steps. This model was then expanded to predict the strengthening in alloys using calculated average precipitate number density, radius, etc. The calibration of this model was achieved with Bayesian optimization, and the model was verified against experimentally gathered hardness data. An analysis of the outputs from this code allowed the development of optimal heat treatments, which were validated experimentally and proven to result in higher final strengths than were previously observed. Bayesian optimization …

Go to article

Energy Science & Engineering: 10 Years Of Excellence, Yun Hang Hu May 2022

Energy Science & Engineering: 10 Years Of Excellence, Yun Hang Hu

Michigan Tech Publications, Part 1

No abstract provided.

Go to article

Ultrahigh Piezoelectric Performance Through Synergistic Compositional And Microstructural Engineering, Yongke Yan, L. D. Geng, Li Feng Zhu, Haoyang Leng, Xiaotian Li, Hairui Liu, Dabin Lin, Ke Wang, Yu Wang, Shashank Priya Mar 2022

Ultrahigh Piezoelectric Performance Through Synergistic Compositional And Microstructural Engineering, Yongke Yan, L. D. Geng, Li Feng Zhu, Haoyang Leng, Xiaotian Li, Hairui Liu, Dabin Lin, Ke Wang, Yu Wang, Shashank Priya

Michigan Tech Publications, Part 1

Piezoelectric materials enable the conversion of mechanical energy into electrical energy and vice-versa. Ultrahigh piezoelectricity has been only observed in single crystals. Realization of piezoelectric ceramics with longitudinal piezoelectric constant (d33) close to 2000 pC N–1, which combines single crystal-like high properties and ceramic-like cost effectiveness, large-scale manufacturing, and machinability will be a milestone in advancement of piezoelectric ceramic materials. Here, guided by phenomenological models and phase-field simulations that provide conditions for flattening the energy landscape of polarization, a synergistic design strategy is demonstrated that exploits compositionally driven local structural heterogeneity and microstructural grain orientation/texturing to provide record piezoelectricity in …

Go to article

Microscale Transverse Compression Modeling: A Comparative Study Of The Analytical Mac/Gmc Methods To Experimental Results, Emily Zeitunian Jan 2022

Microscale Transverse Compression Modeling: A Comparative Study Of The Analytical Mac/Gmc Methods To Experimental Results, Emily Zeitunian

Dissertations, Master's Theses and Master's Reports

Composite materials require a multi-scale approach to fully understand its behavior. At the micro level, material behavior analysis is conducted most often using numerical or analytical approaches. These models, however, require validation from experimental data to ensure material predictions are accurate. This study compares a semi-analytical micromechanical analysis tool, MAC/GMC, to experimental results of in-situ microscale transverse compression testing conducted at AFRL facilities. Effective properties, stress-strain curves, stress and strain fields, and damage predictions are compared with experimental outputs. Both generalized method of cells (GMC) and high-fidelity generalized method of cells (HFGMC) theories implemented within MAC/GMC show results that agree …

Go to article

The Influence Of Different Crystal Modifiers On Ultra-Low Embodied Energy Curing Fiber-Reinforced Cement Composites, Passakorn Sonprasarn, Wichit Prakaypan, Sureerat Polsilapa, Nuntaporn Kongkajun, Edward A. Laitila, Nutthita Chuankrerkkul, Parinya Chakartnarodom Jan 2022

The Influence Of Different Crystal Modifiers On Ultra-Low Embodied Energy Curing Fiber-Reinforced Cement Composites, Passakorn Sonprasarn, Wichit Prakaypan, Sureerat Polsilapa, Nuntaporn Kongkajun, Edward A. Laitila, Nutthita Chuankrerkkul, Parinya Chakartnarodom

Michigan Tech Publications, Part 1

Fiber-reinforced cement composites (FRCC) are widely used in the construction of houses and commercial buildings in many countries such as the United States, the United Kingdom, the European countries, and the Asian countries such as China, India, and Thailand. Conventionally, the FRCC is manufactured from Portland cement, silica sand, and cellulose fiber using the so-called autoclaved curing under a designate hydrothermal condition to accelerate the hydration reaction resulting in superior properties. However, the autoclave-curing process needs a huge investment and generates highly environmental impact specially greenhouse gases due to its heavy energy consumption. Hence, this research aims to develop the …

Go to article

Length-Scale-Dependent Stress Relief Mechanisms In High Purity Indium, Fereshteh Mallakpour Jan 2022

Length-Scale-Dependent Stress Relief Mechanisms In High Purity Indium, Fereshteh Mallakpour

Dissertations, Master's Theses and Master's Reports

Lithium-ion batteries are widely used in portable electronics and electric vehicles. However, due to the presence of flammable liquid electrolytes, these devices fail catastrophically when the cell experiences a short circuit. One attractive solution to this problem is a solid-state battery. As the name implies, the flammable liquid electrolyte is replaced by a non-flammable solid-state electrolyte (SSE). The unexpected, yet frequently observed failure mechanism in these devices is the formation and growth of lithium dendrites originating at the interface between the lithium anode and the SSE. As the dendrites grow, device performance degrades. Once the dendrites completely penetrate the SSE, …

Go to article

First Prev Next Last