Materials Science and Engineering Commons^™

Development Of Test Methods For Measuring Fiber Misalignment And Warping In Honeycomb-Core Composite Panels, Wyatt Taylor, Haripriya Nilakantan

Materials Engineering

Zodiac Aerospace manufactures honeycomb-core composite panels to be used in aircraft cabin interior components. During the manufacturing process, some panels become warped such that they cannot be used for their designated aircraft cabin components. As a result, these panels are scrapped because they cannot be recycled. About 44 to 90% of panels become warped during manufacturing. Warping is caused by many factors, including layer misalignment, processing parameters such as temperature and pressure gradients, and fiber misalignment in the prepregs. Currently, Zodiac does not have any data on the effect of fiber misalignment on panel warpage, so a testing protocol was …

Synthesis Of Ɣ-Cyclodextrin Metal Organic Frameworks And The Encapsulation Of Caffeine And Theophylline, Evan Noel Sommerville, Riley Andrew Harden

Materials Engineering

Nanoporous, non-toxic, ɣ-cyclodextrin metal organic frameworks (𝛾-CDMOFs) have potential applications in fields such as drug delivery and organic compound storage. The properties of many methylxanthines (alkaloids such as caffeine and theophylline) could be improved through 𝛾-CDMOF encapsulation, yet little research has been performed on the subject. In this study, 𝛾-CDMOFs were synthesized in order to 1. Determine if the vapor diffusion synthesis method can produce 𝛾-CDMOF crystals that replicate those in literature and 2. Determine if 𝛾-CDMOFs are able to encapsulate methylxanthines. The 𝛾-CDMOFs were synthesized through vapor diffusion of methanol in a solution of ɣ-cyclodextrin and potassium hydroxide (KOH). …

Next Generation Protocol: Innovating A Resilient Future, Andrew Steven Rudnick, Jamie Cannady, Joe Decesaro, Juan A. Ortiz Salazar

Materials Engineering

Conventional practices do not account for product life beyond end-of-sale – these practices are not sustainable. We have developed an end-of-life protocol that includes a metric that we call the Recovery Rating. The objectives of this Next Generation Protocol, beyond supporting the United Nations’ Sustainable Development Goals, are to encourage the production of goods designed for recovery and to promote the collaboration between consumers, the public, and the private sector to recover goods at their end-of-life. The Recovery Rating that we propose evaluates and quantifies recovery potential of products. The Recovery Rating, which is normed against embodied energy from the …

Investigation Of Narloy-Z Yield Strength In Response To Changes In Ingot Processing And Heat Treatment, Stanley C. Goto, Sarah E. Wattenberg

Materials Engineering

This study investigates the effect of cooling rate on the yield strength of NARloy-Z. NARloy-Z is a copper-based alloy with 3 wt.% silver and 0.5 wt.% zirconium. The types of NARloy-Z were classified by the ingot processing (old or new) and the material lot (old or new). There were three variations of NARloy-Z in this study: old processing and material (Old/Old); old processing and new material (Old/New); and new processing and material (New/New). NARloy-Z undergoes a braze thermal cycle and age (BTCA) heat treatment for its application, and a single cooling rate within the BTCA was manipulated in this study. …

Evaluation Of Electrochemical And Laser Polishing Of Selectively Lasermelted 316l Stainless Steel, Julian R. Lohser

Master's Theses

Selective laser melting has shown incredible growth as a metallic additive manufacturing process in recent years. While it does provide many solutions and new ways to approach challenges, it does not come without issues of its own, namely, surface roughness. In the as-printed state, the surface roughness of selectively laser melted parts is unacceptable for use in engineering applications. Additionally, selective laser melting is used to produce complex geometries with hard to reach features, preventing conventional mechanical polishing from being successful. Therefore, it is necessary to evaluate non-mechanical polishing processes as treatments for surface roughness. In this study, electrochemical and …

Effects Of Head Formation And Heat Treatment On The Mechanical Properties Of Connecting Rod Bolts, Caleb A. Leavitt, Matthew R. Lauretta

Materials Engineering

Oliver Racing Parts (ORP; Charlevoix, Michigan) is looking to optimize their manufacturing process for high-strength connecting rod bolts. A high yield strength is desired for the bolts because deformation would result in catastrophic engine failure. The bolts were made of H11, a chromium hot-work tool steel; and MLX17, a precipitation hardenable stainless steel. Tensile testing was performed to determine the tensile and yield strengths of the bolts. Fracture surfaces were imaged via scanning electron microscopy to characterize the failure modes. To observe the effects of bolt heading on microstructure and bolt strength, two batches of MLX17 were prepared; one batch …

Analysis Of The Low-Cycle Fatigue Behavior Of Silicone Rubber For Biomedical Balloons, Chase Cooper

Materials Engineering

The development of a medical drug delivery device that allows for the deployment drugs into the adventitial tissue of blood vessels requires the inflation of a silicone elastomer. The inflated silicone must be able to consistently endure multiple loading cycles without failing so that the device can operate reliably. There are multiple methods of processing the silicone for the device and the goal of this study is to examine the effect of the various processing methods on the characteristics of the silicone. The Dynamic Mechanical Analysis Machine (DMA) is used to model the conditions of the device’s application by performing …

Development Of Low Cost, Environmentally Friendly And High Strength Carbon Foams From Bread And Cake, Laura Mountain-Tuller

Materials Engineering

Carbon foam is a high niche material that consists of a highly porous, three-dimensional cellular network that is characterized by extremely high strength-to-weight ratios and low thermal conductivity. Due to these properties, carbon foams excel in structural and thermal applications, especially in the aerospace industry. Typically, carbon foams are formed through a heating process called pyrolysis of polymer precursors with high carbon content. This process is done at high temperatures in an oxygen free environment. These precursors are expensive to make and use toxic chemicals to produce, therefore, there is a push to find an environmentally friendly and cost-effective method …

Usa Boccia Ball Ramp For Athletes With Quadriplegia, Alissa A. Koukourikos, Matthew Lee, Nathan Bernards

Mechanical Engineering

In this report, the design process in creating an assistive device for Boccia Classification 3 (BC3) players is outlined. The initial research steps, including research into the rules of the game, capabilities of the players, and existing products is documented to show where ideas for the product stemmed from. This transitions into requirements that the sponsor requested, and preliminary designs and ideas for the product. Finally, this report explains the details of the final design, which has been analyzed for safety, ease of use, and ability to function under different conditions. The processes of manufacturing and testing will also be …

A Comparison Study Of Composite Laminated Plates With Holes Under Tension, Joun S. Kim

Master's Theses

A Comparison Study of Composite Laminated Plates with Holes under Tension

A study was conducted to quantify the accuracy of numerical approximations to deem sufficiency in validating structural composite design, thus minimizing, or even eliminating the need for experimental test. Error values for stress and strain were compared between Finite Element Analysis (FEA) and analytical (Classical Laminated Plate Theory), and FEA and experimental tensile test for two composite plate designs under tension: a cross-ply composite plate design of [(0/90)4]s, and a quasi-isotropic layup design of [02/+45/-45/902]s, each with a single, centered hole of 1/8” diameter, and 1/4" diameter (four sets …

Usage Of Fomblin Y To Improve Water Repellence Of Surface Coatings, Shawn Pj Kirby, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Fluoro-Decyl POSS (FDP) has shown strong potential as a water repellant surface coating. Additionally, Fomblin is a solvent believed to have the ability to control the crystallization of POSS compounds on surfaces. Controlling the crystallization is key to improving water repelling abilities of surfaces. Thus, dip coating FDP and Fomblin onto surfaces is being investigated for water repulsion, mechanical stability, and deposition feasibility. Relative water repelling abilities of different coatings were determined by measuring contact angle of surfaces with water. Coatings with and without POSS and Fomblin were compared. It was shown that the surfaces treated with both POSS and …

Usage Of Fomblin Y To Improve Water Repellence Of Surface Coatings, Shawn Pj Kirby, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Fluoro-Decyl POSS (FDP) has shown strong potential as a water repellant surface coating. Additionally, Fomblin is a solvent believed to have the ability to control the crystallization of POSS compounds on surfaces. Controlling the crystallization is key to improving water repelling abilities of surfaces. Thus, dip coating FDP and Fomblin onto surfaces is being investigated for water repulsion, mechanical stability, and deposition feasibility. First, temperature dependence of solubility of Fluoro-Decyl POSS in Fomblin was tested using Dynamic Light Scattering. Relative water repelling abilities of different coatings were determined by measuring contact angle of surfaces with water. Coatings with and without …

Comparative Solubility Of Poss Compounds In Fomblin Y, Shawn Pj Kirby, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Fluoro-Decyl POSS (FDP) has shown strong potential as a water repellant surface coating. Additionally, Fomblin is a solvent believed to have the ability to control the crystallization of POSS compounds on surfaces. Controlling the crystallization is key to improving water repelling abilities of surfaces. Thus, dip coating FDP and Fomblin onto surfaces is being investigated for water repulsion, mechanical stability, and deposition feasibility. However, in order for this to be successful, POSS must be soluble in Fomblin. Temperature dependence of solubility of Fluoro-Hexyl, Fluoro-Octyl, Fluoro-Decyl POSS in Fomblin was tested using Dynamic Light Scattering. The values were compared, and it …

Characterization Of Slm Printed 316l Stainless Steel And Investigation Of Microlattice Geometry, Finley H. Marbury

Materials Engineering

The goal of this project was firstly to characterize Cal Poly’s SLM printed 316L stainless steel. SEM analysis showed Cal Poly’s as-printed 316L material to have a cellular dendritic microstructure containing mostly austenite and a small amount of δ-ferrite. After being heat treated to eliminate warp, its yeild and ultimate tensile strength were on par with the literature, however higher modulus and lower elongation were observed. XRD analysis confirmed residual stresses in the material, and that grains are preferentially oriented in both heat treated and non heat treated samples. The amount of porosity in the material was found to be …

Characterization Of The 15-5 Stainless Steel Electric Discharge Machining Recast Layer, Julian R. Lohser, Rhys W. Gilmore

Materials Engineering

Electric discharge machining (EDM) is a non-conventional machining process that is used for tough, hard materials or materials that require no tool force. Wire EDM produces a recast layer and heat-affected zone as a result of rapid melting and quenching at the surface of the cut. A secondary machining operation has been required to remove this layer. Previous estimates of the depth of the recast layer are likely too conservative due to improvements in the technology; therefore, the goal of this study is to characterize and more accurately investigate the size of the layer. Two EDM machine parameters, voltage and …

Inkjet Printing Of Nano-Silver Conductive Ink On Pet Substrate, Skyler Jiang

Materials Engineering

Printing of conductive ink traditionally uses copper-based ink and was used on high temperature metal substrates due to the high curing and sintering temperature of copper. In this experiment, however, Metalon JS-B25P nano-silver conductive ink was printed using an Epson Stylus C88+ inkjet printer on polyethylene terephthalate (PET) based Novele printing media made for low temperature applications. With silver’s lower sintering temperature, the nano-silver particles in this ink are desired to be able to sinter at a low enough temperature to be used on the PET substrate. The printed ink traces were cured with a temperature-controlled hotplate at 100℃, 120℃, …

The Relationship Between Structural Parameters And Mechanical Properties Of Cactus Spines, Jorge Armando Martinez, Pamela Liz Szeto, Theresa Mae Stewart

Materials Engineering

Considering an increasing interest in renewable, biodegradable resources that exhibit excellent mechanical properties, 24 species of cactus spines were investigated using three-point bend testing, X-ray diffraction (XRD) for structural parameters, and scanning electron microscopy (SEM) to analyze fracture surfaces. Additionally, a density of about 1.3 g/cm3 was measured for each spine utilizing the displacement method, closely matching existing data from literature. The flexural modulus varied greatly between species, ranging from 1.22 GPa (Echinocactus polycephalus) to 43.58 GPa (Stenocereus thurberi). In addition, flexural strength and strain to failure was also measured for each spine. XRD analysis of …

Selective Depolymerization Of Industrial Hemp And Its Effects On Thermal Resistivity, Tanner J. Jolly

Materials Engineering

There is a growing shift within the construction materials industry towards green and sustainable building products. Spending in this area has increased 5 fold since 2011 to a total revenue of $70 billion. An area of particular interest has been aimed at replacing fiberglass batt insulation with cellulose. Cellulose is the most abundant polymer on earth, and has potential to replace petroleum derived insulations. This project explores the potential of selectively isolating cellulose by depolymerizing the support structures found in lignocellulosic materials – specifically lignin and hemicellulose. The current focus is on isolating cellulose from Cannibas sativa, but more …

Tensile Properties Of High-Strength Connecting Rod Bolts, Leland K. Lam

Materials Engineering

Oliver Racing Parts (ORP) is looking to optimize the manufacturing process for high-strength connecting rod bolts. A high yield strength is desired for the bolts because deformation would result in a loss of engine performance. A high tensile strength is also necessary to prevent catastrophic failure if deformation occurs. A high ductility as a proxy for toughness is attractive for resisting crack nucleation and growth during cyclic loading. Bolts were made of MP35N, a nickel-cobalt multiphase alloy; MLX-17, a precipitation hardenable stainless steel; 8740, a low alloy steel; and H11, a chromium hot-work tool steel. The temperature of the most …

Straightening Of Investment Casting Ni-Based Superalloys, Silvia Squillaci, Janessa Cabrera

Materials Engineering

Samples belonging to four different designs of afterburner flaps, available in the as-cast, solutionized and aged conditions, underwent 4-point bend testing to fracture to investigate straightening. The average maximum load values of the second design samples in the as-cast, solutionized and aged conditions were respectively 33 kN, 29 kN and 27 kN. Regarding the fourth design samples, the average maximum load for the as-cast, solutionized and aged conditions were respectively 23 kN, 28 kN, and 25 kN. The other parameter measured during testing was the maximum extension at fracture. All as-cast samples belonging to the second design fractured at values …

Mechanical Testing Protocol For Characterizing Composite Lamina Pre-Pregs, Kenneth Blain Ainslie, Joshua Gustav Brinkmann

Materials Engineering

Zodiac Aerospace currently employs finite element analysis (FEA) computer models to predict the material behavior of its composite products. The objective of this project was to develop a testing protocol for obtaining detailed material property data to use in these FEA models. With accurate material data, FEA models can reduce the need for expensive physical testing and achieve timely troubleshooting when testing complex components. The specific material characterized in this project was an 8-satin weave fiberglass phenolic pre-preg used as the facesheet material in many of Zodiac’s sandwich panel composites. The developed testing protocol involved mechanical testing of lamina and …

Effect Of Composition And Build Direction On Additively Manufactured Hastelloy X Alloys, Justin A. Spitzer, Jeffrey T. Schloetter, Sarah Zerga

Materials Engineering

Microcracking has caused premature failure and reduction in properties in additively manufactured (AM) Hastelloy X. The purpose of this research is to meet or exceed the mechanical properties of wrought Hastelloy X by modifying the composition and build direction of Hastelloy X manufactured using Direct Metal Deposition (DMD). Tensile testing, scanning electron microscopy (SEM), and metallography were performed on the samples. ANOVA was used to analyze the dependence that the properties had on build direction and composition. The nominal composition wrought samples had a yield strength of 310.1 MPa and a 60.79% Elongation. Alloy P60-X18 in a horizontal build had …

Comparison Of Intrusive And Non-Intrusive Methods For Corrosion Monitoring Of Fuel Processing Systems, Armando Jacob Espinoza, Thomas Conner Field

Materials Engineering

This presentation contains an assessment of the best overall corrosion monitoring device, intrusive or non-intrusive, for use in the petrochemical industry. Corrosion in the petrochemical industry is a large issue because it causes a deterioration of pipe integrity in fuel processing systems. A reduction of pipe wall integrity due to corrosion could result in a leak or an explosion of fuel processing lines since those systems function at high pressures. The use of corrosion monitoring systems in the petrochemical industry helps to detect early signs of corrosion prior to failure so that proper maintenance can be performed to prevent catastrophe. …

Investigation Of A Method To Determine Mechanical Properties Of Integral Composite Hinges For Application In Foldable Skis, Jada Evers, Kathryn Johnson

Materials Engineering

No abstract provided.

Predicting Service Life Of 347 Stainless Steel Pipes By Carburization Rate Measurement, Tyler L. Sura

Materials Engineering

Chevron Corporation and other refiners face challenges predicting the service life of piping in coker furnaces. This is largely due to a build up coke on a single surface of the piping. This coke build up results in carbon penetration into the surface of the 347 stainless steel used for the pipes. Carbon penetration can lead to degradation of the surface and ultimately, the failure of the pipe. Current modeling software has difficulty predicting the influence of sulfur on the carbon penetration rate. This study aims to provide a baseline for further study into the subject. The carbon penetration rate …

Development Of Low Cost Braze Alloys For Aerospace Applications, Alyssa M. Elliott, Sandy Babich, Blake Whitmee

Materials Engineering

Non-precious metal braze alloys can help lower the cost of brazing, which is a commonly-used joining process in the aerospace industry. A-286, a stainless steel superalloy, and Inconel© 718, a nickel-based superalloy, are both commonly used alloys at Aerojet Rocketdyne. Both alloys were brazed into butt joints using nickel-based braze alloys: AMS 4776, 4777, and 4778. The brazed samples were machined into a modified version of the ASTM E8 subsize specimen samples and tensile tested to compare the strength and calculated elongation of the brazed samples to the base metals’ properties. All of the brazed samples fractured at the joint, …

Bear Minimum: Ultralight Composite Bear Canister, Rama B. Adajian, Adam C. Eisenbarth

Mechanical Engineering

The ultralight backpacking community needs a strong, easy to use, safe bear canister that is lighter than current market products for trekking in the backcountry. A full design of the lid for the bear canister is to be completed. This includes the locking mechanism to ensure it is bear proof, the interface between the lid and the canister, and the structure of the lid so it passes the strength and weight specifications. The lid, along with the already designed canister body, is to be manufactured with formal documentation. The lid will initially be tested separately and then with the canister …

Mitigation Of Corrosion Under Insulation (Cui) Of Carbon Steel Of Different Insulating Materials: A Literature Review And Testing Analysis, Michael Alexander Lowes

Materials Engineering

Equipment often found in refineries may be enveloped in insulation and weathering jackets to maintain internal processing temperatures. In many cases moisture from the environment will penetrate the weathering jacket and infiltrate the insulation, leaching corrosive ions to the surface of metal equipment, effectively creating a corrosion cell. The goal of this project is to investigate different insulating materials for their ability to inhibit corrosion under insulation (CUI). The inhibiting mechanism utilizes water ingress that leaches ions from the insulator to bond with the surface metal and create a passive layer, inhibiting any further corrosion. This study will follow ASTM …

Preliminary Investigations Into Selective Laser Melting, David Takeo Otsu

Master's Theses

Selective laser melting is a promising metallic additive manufacturing process with many potential applications in a variety of industries. Through a gracious donation made by Lawrence Livermore National Laboratory, California Polytechnic State University received and installed an SLM 125 HL selective laser melting machine in February 2017. As part of the initial setup effort, a preliminary machine verification study was conducted to evaluate the general print quality of the machine with default parameter settings. Coincidentally, the as-printed microstructure of SLM components was evaluated through nil strength fracture surface examination, an alternative to conventional polish-and-etch metallography. A diverse set of components …

Kinked Tensile Behavior Of Cold Worked Nitinol, Grant R. Caraway, Samuel J. Canovas

Materials Engineering

To characterize the decrease in ductility caused by an induced stress concentration as a function of various levels of cold work and heat treatment, Nitinol medical guide wires with a .004″ diameter were tested using both a standard, straight tensile test and a modified, bent tensile test. The ratio of the two break loads (bent:straight) for identically processed samples was used as a proxy for measuring the ductility of the guide wires: the higher the ratio, the more ductile the sample. The average break load ratio as a function of increased cold work, decreased from 1.27 to 0.91 for the …