Materials Science and Engineering Commons^™

Analysis Of Traffic Congestion Patterns In Continuous Bottleneck Construction Zones Of Highways Under Mixed Traffic Of Passenger And Freight Vehicles, Han Hailong, Song Tailong, Ma Tianyong, Fan Zhaodong, Chen Zhexin, Chen Liang

Journal of China & Foreign Highway

To investigate the traffic congestion pattern changes in continuous bottleneck sections of highway construction zones under mixed passenger and freight traffic conditions, the spatio-temporal evolution laws of vehicle speed and lane-changing trajectory distribution in construction sections with successive lane-narrowing bottlenecks were studied. Based on measured highway data, traffic flow simulation parameters were calibrated using a genetic algorithm. By taking traffic volume and the proportion of passenger and freight vehicles as entry points, a traffic simulation experiment for continuous bottleneck construction zones under multi-factor coupling effects was constructed, and the spatio-temporal variation characteristics of speed and lane-changing trajectory distribution in the …

Analysis Of Temperature Field Of Steel Box Girders During Steam Curing Construction Process Of Steel-Uhpc Composite Bridge Decks, Wu Shang, Zhang Yongjian

Journal of China & Foreign Highway

To clarify the influence of high-temperature steam curing of steel-ultra-high performance concrete (UHPC) lightweight composite bridge deck paving on the temperature field of the steel box girder, taking a certain bridge in Hunan Province as an example, finite element numerical simulation and actual bridge testing were conducted on the temperature field of the steel box girder during the high-temperature steam curing process of the bridge deck paving. The numerical calculations were generally consistent with the test results. The analysis results indicate that under the superimposed effect of solar radiation heating and high-temperature steam curing heating, the maximum temperature of the …

Summary And Prospect Of Typical Diseases In Energy Transport Channels In Winter Cold Regions Over Past 20 Years, Jia Qinlong, Hou Zhongfei, Yin Yanping

Journal of China & Foreign Highway

To investigate the typical disease characteristics of energy transport channels in winter cold regions and guide the design for extending road service life, the causes of diseases such as pavement reflective cracks, continuous potholes on bridge decks, and failures of bridge drainage systems were analyzed based on the 20-year operation data of a 531 km in-service expressway in the coal energy region of northern Shaanxi. The research results indicate that when the asphalt pavement thickness reaches 22 cm, the reflective crack spacing of the expressway operated for 15 years can be controlled to over 50 m. Basically, no base layer …

Road Design Methods For Brt Projects Based On French Standard System : A Case Study Of A Project In West Africa, Wang Meng, Wu Cheng

Journal of China & Foreign Highway

With the continuous advancement of China ’s “Belt and Road Initiative”, Chinese enterprises have become increasingly involved in international engineering markets, undertaking numerous transportation infrastructure projects, particularly in Africa and Southeast Asia. However, international engineering projects commonly face the challenge of inconsistent design standard systems across different countries, posing significant difficulties for Chinese enterprises during project implementation. To address this issue, the differences in BRT road design under Chinese and French standards were focused on in this study, and their respective design philosophies and methods were analyzed. Taking a BRT project in a West African country as an example, field …

Transforming Dredged Sediment Into Reactive Clay: Critical Review Of Calcination, Reactivity, And Sustainable Valorization As Supplementary Cementitious Material, Seongho Han, Sanghwon Wi, Koochul Ji, Keun Hyeok Yang, Farshad Rajabipour, Kamal H. Khayat, Jinyoung Yoon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Dredged sediment (DS) is generated worldwide in large volumes through routine port and waterway maintenance, yet its disposal presents environmental and economic challenges. Recently, calcined dredged sediment (CDS) has emerged as a supplementary cementitious material (SCM), offering a viable alternative to traditional SCMs, such as fly ash and slag cement. This review synthesizes current knowledge on the physical, chemical, and mineralogical characteristics of raw DS and pretreatment strategies aimed at dewatering, organic matter removal, and contaminant stabilization. The effects of calcination on the production of reactive amorphous aluminosilicates are also discussed. Emphasis is placed on physicochemical changes revealed by experimental …

Low-Carbon Concrete For Sustainable Construction: A Comprehensive Review Of Performance Characteristics, Implementation Challenges, And Decarbonization Pathways, Fazel Azarhomayun, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing the carbon footprint of concrete has become a central objective in sustainable construction. Low-carbon concrete (LCC), developed primarily through clinker reduction, supplementary cementitious materials, and alternative binder strategies, offers a promising route for lowering embodied emissions while maintaining the performance requirements of structural concrete. This comprehensive review consolidates the current state of knowledge on LCC, identifies critical research and implementation gaps, and examines its material composition, mixture-design methodologies, performance characteristics, structural applications, implementation challenges, and decarbonization pathways. Single-SCM systems have been reported at clinker-replacement levels approaching 50%, although durability at these replacement levels, particularly carbonation resistance, remains system- and …

Recent Advances In The Rheological Properties Of Ultra-High-Performance Concrete: A Critical Review, Le Teng, Kamal H. Khayat, Jiaping Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) with adapted rheology continues to attract interest considering the requirement for novel processing techniques such as self-consolidating, pumping, spraying, and three-dimensional (3D) printing. The rheology of UHPC is complex due to its high solid volume fraction, low water content, and wide range of constituent materials that affect its flow properties. This work provides guidance for tailoring the mixture proportioning of UHPC to secure proper rheological properties and performance of UHPC for various applications. In the first part of this work, key physical, physicochemical, and chemical factors that can affect the rheological properties of UHPC are discussed. Rheological …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Computer Vision And Machine Learning Approaches For Defect Detection In 3d-Printed Cementitious Materials: A Systematic Review, Muhammad Ali Musarat, Ruben Paul Borg, Jingjie Wei, Carl James Debono, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D printing is evolving at a fast pace in both the manufacturing and construction sectors. These advancements can greatly benefit these industries. However, the 3D printing of concrete structures presents some challenges due to defects in the 3D concrete printed elements. Hence, this study systematically reviews Artificial Intelligence (AI)-driven techniques, such as Computer Vision and Machine Learning, to identify surface defects that can occur in 3D-printed cementitious material structures. The adopted methodology was the PRISMA statement with the aim of reporting the systematic review and meta-analysis. Two well-known databases, Web of Science and Scopus, were utilised for data extraction of …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Toward Sustainable 3d Printable Cementitious Materials: Low-Carbon Design With Fiber Reinforcement, Nima Mahmoudzadeh Vaziri

Miners Solving for Tomorrow Research Conference

3D printing of cementitious materials, as an emerging construction technology, faces challenges in both mechanical performance and sustainability. Conventional mixture designs rely on high cement contents, leading to increased CO2 emissions, while printed elements often exhibit brittle behavior with limited crack resistance and reduced post-cracking performance. This study investigates the development of low-carbon 3D printed cementitious composites using environmentally friendly supplementary cementitious materials (SCMs) and fillers, combined with fiber reinforcement to enhance mechanical performance. Locally available SCMs and fillers were incorporated to significantly reduce cement content (>40%) and improve sustainability. Fiber reinforcement was introduced to mitigate brittleness and enhance …

New Insights Into Dynamic Evolution Of Colloidal Network Structure During Early-Age Hardening Of Cementitious Materials, Hengrui Liu, Kaiyin Zhao, Shipeng Zhang, Hanghua Zhang, Shuangshuang Liu, Lucen Hao, Hongyan Ma, Kamal Khayat, Chi Sun Poon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The evolution of microstructure in cementitious materials during their transition from fluid to solid state plays a critical role in determining their ultimate mechanical strength and overall performance. This hydration stage primarily involves a dynamic densification process occurring within the colloidal network. However, the field of cement-based materials currently lacks a comprehensive theoretical framework and associated parameters capable of effectively characterizing the specific structural regions within this network. In this study, we propose an Improved Particle Linkage (IPL) theory for describing the strength, types, and quantities of particle linkages within colloidal network. The IPL theory classifies the internal network structure …

Advances And Challenges In Nano-Modified Cementitious Composites: Mechanisms, Dispersion Strategies, And Impact On Mechanical Properties, Fatemeh Mohammadi Ghahsareh, Pengwei Guo, Nusrath Jaha, Yi Bao, Kamal H. Khayat, Weina Meng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Nanomaterials are increasingly utilized to enhance the mechanical properties, durability, and functionality of concrete materials but face challenges such as agglomeration and uneven dispersion in cementitious systems, which can offset the intended improvements. This paper reviews the advances and challenges associated with nano-modified cementitious composites, elucidating fundamental mechanisms and highlighting strategies for overcoming the challenges through experimental and computing techniques. The reviewed contents include (1) the classification of nanomaterials commonly used in cementitious systems and the mechanisms through which they enhance the mechanical properties of cementitious composites; (2) challenges of nanomaterials such as agglomeration in water, re-agglomeration in cementitious systems, …

Numerical Simulation Analysis On Support Performance Of Inclined-Vertical Combined Double-Row Interlocked Steel Pipe Piles, Zhou Yi, Zhang Ning, Wang Yanhua, Zhou Dequan

Journal of China & Foreign Highway

To select appropriate support structures in foundation pit engineering of underground tunnels for the Hong Kong International Airport (HKIA ),this paper proposed the use of inclined-vertical combined interlocked steel pipe piles,which are beneficial for support,water isolation,and recovery.Numerical simulations were conducted using finite element software Midas GTS NX to analyze the effect of different combination types and inclination angles on the engineering response of the inner-row piles of inclined-vertical combined double-row interlocked steel pipe piles.The results show that the inclined-vertical combined double-row piles reduce the horizontal displacement at the top of the inner-row piles by approximately 50% and decrease the peak …

Influence Mechanism Of Static And Dynamic Loading On Adsorbed Bound Water And Deformation In High Liquid Limit Soils, Fang Zhongwang, Zhou Shiji E, Xiao Yupeng, Peng Xin, Zhang Rui

Journal of China & Foreign Highway

In order to reveal the evolution law of adsorbed bound water and the deformation characteristics of high liquid limit soil under static and dynamic loading,Hainan high liquid limit soil and Hunan clayey sand were selected as comparative samples.Through consolidation,consolidation-creep,and dynamic triaxial tests,the deformation patterns of high liquid limit soil under different loading conditions were obtained.By combining nuclear magnetic resonance tests,the variation pattern of adsorbed bound water content in specimens before and after the consolidation and dynamic triaxial tests was studied.The results show that under static loading,the compression coefficient of high liquid limit soil meets the requirements of the Specifications for …

Utilization Technology And Compaction Quality Control Of Hardened Layer In Beam Yard Of Rock-Filled Roadbed, Cheng Xiaoliang, Tian Wendi, Gao Mengke, Zhou Xujia

Journal of China & Foreign Highway

To investigate the utilization technology and compaction quality control of hardened layers in the beam yard of rock-filled roadbed,the optimization design and construction control methods for rock-filled roadbed under different conditions were proposed based on a highway project in Guangdong Province.When the elevation of the hardened layer was lower than the top surface elevation of the roadbed and the top surface bending and settlement value of the hardened layer was less than that of the rock-filled roadbed,the gravel material could be filled directly on the hardened layer to the top surface elevation of the roadbed,and acceptance and pavement design could …

Shaking Table Test And Numerical Simulation Of Seismic Response Characteristics Of Rock Slope With Muddy Interlayer, Duan Chenggang, Fang Yanlin, Tian Yeqing, Zhou Zhijun

Journal of China & Foreign Highway

In order to study the seismic macroscopic failure process and dynamic response characteristics of rock slope with muddy interlayer and reveal the influence of muddy interlayer on slope stability,a similar slope model with concave and convex slope types was designed,and shaking table test was carried out;finite element analysis was used for numerical modeling analysis,and the results obtained by the two models were compared.The results show that:① The macroscopic deformation and failure process of the model slope is divided into three stages.Muddy interlayer dislocates,and cracks occur;mud interlayer slips,and cracks expand;slope collapses;② The seismic load has a decisive influence on the stability …

Study On Creep Mechanical Properties And Constitutive Models Of Silty Clay With Different Compaction Degrees, Li Mingchao, Wu Gangrong

Journal of China & Foreign Highway

In order to ensure the smooth construction and long-term stable operation of silty clay sections in the Zhoukou –Pingdingshan highway project,this paper conducted one-dimensional creep tests on silty clay samples with different compaction degrees under different stress levels and studied the effect law of compaction degree on its long-term creep mechanical properties.By establishing the corresponding creep constitutive models,a theoretical basis was provided for the prevention and control of creep failure in silty clay subgrades in engineering practice.Research results show that:① Under the same stress level,with the increase of compaction degree,the instantaneous strain,creep strain,and total strain of the samples all decrease …

Reflection Cracking Resistance And Fatigue Performance Of Super-Flexible Fma Mixture, Lan Yong, Deng Xinghe, Zhang Zida, Wu Kuanghuai, Ding Weizhe, Guan Xuebing, Peng Tiekun

Journal of China & Foreign Highway

To investigate the fatigue performance and reflection cracking resistance of super-flexible fluid mastic asphalt (FMA ) mixtures,this study designed a super-flexible FMA- 13 mixture by the mastic flow for filling (MaFF ) method.The effects of temperature and maximum horizontal tensile displacement on the cracking resistance of both FMA- 13 and GAC- 13 (as the control ) mixtures were explored via the Overlay Tester.Additionally,small-scale accelerated pavement loading tests were conducted to analyze the effect of load cycles on the rebound modulus of the FMA- 13 mixture.A nonlinear fatigue damage model was employed to predict the fatigue life of both mixtures.The results …

Research On Pavement Roughness Evaluation Method Based On Smartphones, Siriguleng Bai, Yili Guoqi, A Rong, Guo Guoying, Wang Jing

Journal of China & Foreign Highway

To address the low efficiency and high cost of current detection methods,as well as the insufficient accumulation of pavement damage data on rural low-grade roads,this study developed a vehicle vibration data acquisition application based on smartphones and proposed a conversion method for calculating an index equivalent to the international roughness index (IIRI).Vertical acceleration signals collected during vehicle travel were proposed through high-pass filtering and denoising to calculate the vertical displacement,from which a converted I'IRI was derived.Experimental results show that although the data collected by smartphones has slightly lower accuracy than that collected by professional detection equipment,the proposed I'IRI exhibits a …

Study On Thermal Corrosion Resistance Of Asphalt Modified By Phase Change Materials, Li Ping, Wang Zhijian, Zheng Zhipeng, Yi Chengxi, Zhou Dexiang

Journal of China & Foreign Highway

In order to address the degradation issues faced by asphalt mixtures in airport runways and highway pavement,particularly focusing on thermal stability and thermal corrosion under high-temperature conditions,this paper investigated the impact of phase change materials (PCMs ) on the thermal corrosion resistance of asphalt.Three types of PCMs were utilized to jointly modify SBS-modified asphalt,and a series of tests were conducted to systematically analyze the performance of the modified asphalt,including thermogravimetric-differential scanning calorimetry (TG-DSC ) analysis,heat storage and release performance evaluation,laboratory thermal corrosion simulation of asphalt,three-index testing,and dynamic shear rheometer (DSR ) testing.The results indicate that PCMs can effectively regulate asphalt …

Sound Attenuation Characteristics In Relation To Compaction Degree In Sandy Soil, Liu Junbin, Long Shiguo

Journal of China & Foreign Highway

In order to investigate the effect of water content and compaction degree on the attenuation characteristics of sound waves in sandy soil,this paper first determined the particle gradation of the soil through a sieving test and identified its optimal water content through a compaction test.Then,six sets of ring knife specimens of sandy soil with different water contents and nine sets with varying compaction degrees were prepared.Ultrasonic testing was carried out using the acoustic transmission method,and the received acoustic signals were subjected to time-frequency analysis to extract acoustic characteristic parameters indicative of the compaction degree.Finite element simulation was employed to explore …

Road Performance And Water-Softening Characteristics Of Stabilized Soil Under Cyclic Loading, Hu Hong, Li Zongheng, Feng Yong, Cao Zhigang, Liu Yaoxing

Journal of China & Foreign Highway

To effectively deal with waste soil and reduce environmental pollution,this paper took a road engineering project in Shaoxing as the research object and conducted a cyclic triaxial incremental loading test on the undisturbed lime soil under undrained conditions to study the effects of confining pressure,cyclic stress ratio,and water immersion on its performance.The results show that when the cyclic stress ratio increases from 1 to 4,the cumulative strain and resilient strain increase rapidly in the initial loading stage,showing a trend of “stepwise” increase.The cumulative strain produced at a cyclic stress ratio of 2 is about twice that at the cyclic stress …

Study On Mechanical Properties Of Improved High Liquid Limit Soil Based On Solid Waste, Zhang Yafei, Qin Yalan, Wu Jiacheng, Zhang Rui, Gao Yingli, Zhu Zhanghuang, Li Lu

Journal of China & Foreign Highway

To improve the application of the solid waste polymer-modified high liquid limit soil as filler in the upper embankment or road bed work area,this study prepared colloidal polymer and improved materials of traditional cement by using industrial solid waste (fly ash,steel slag,etc.) and compared them with the improved high liquid limit soil to investigate its mechanical properties and economic benefits.The mechanical properties of high liquid limit soil improved by the colloidal polymer of solid waste,as well as its stability and durability when immersed in water were studied through a liquid-plastic limit test,a laboratory compaction test,a shrinkage test,a California bearing ratio …

Workability And Compressive Strength Of Steel Slag Powder-Cement-Based Self-Compacting Iron Tailings Mortar, Yang Zaiqing, Jin Shengji, Zhang Xiaogang, Sheng Guohua

Journal of China & Foreign Highway

Steel slag and iron tailings are typical industrial solid waste.Their large-scale stockpiling occupies a significant amount of land and has a negative impact on the environment.To respond to the Guiding Opinions on the Comprehensive Utilization of Bulk Solid Waste in the 14th Five Year Plan and expand the use of steel slag powder and iron tailings sand as concrete admixtures and aggregates,this study prepared steel slag powder-cement-based self-compacting iron tailings mortar.The workability index of mortar was determined through two tests:the flow expansion test and the V-shaped funnel test.Additionally,the compressive strength of the mortar was measured using a servo press.The results …

Effect Of Lithium Slag Dosage On Strength And Dry Shrinkage Properties Of Cement Stabilized Recycled Macadam, Zhao Ziyu, Gan Xianyong

Journal of China & Foreign Highway

To improve the mechanical properties and dry shrinkage properties of cement stabilized bases formed by cold in-place recycling of cement concrete pavements,lithium slag was mixed into the recycled mixture in mass ratios of 0%,6%,9%,and 12%.The effects of lithium slag dosage on the mechanical,dry shrinkage,and water stability properties of the recycled base were analyzed through the unconfined compressive strength,splitting,dry shrinkage,and water stability tests,and the mechanism underlying the improving effect of lithium slag on the cement stabilized base formed by cold in-place recycling of the cement concrete pavement was analyzed by X-ray diffraction (XRD ) and scanning electron microscopy (SEM ).The results …

Mechanical Properties Of Transition Section Of Cable-Stayed Bridge With Kilometer-Scale Steel-Uhpc Composite Girders, Li Qiu, Zhi Haitao, Peng Yanqing, Peng Jianxin, Yuan Qin, Wu Xuewei

Journal of China & Foreign Highway

To study the mechanical properties of the steel-concrete composite section between steel box girders and steel-ultra-high performance concrete (UHPC ) composite girders,the Guanyinsi Yangtze River Bridge with a main span of 1 160 m was used as the background.Through refined finite element modeling,the stress characteristics under the most unfavorable load conditions and transmission mechanism of the steel-concrete composite section were analyzed,and the main factors affecting the stress of the composite section were discussed.The results indicate that under the most unfavorable load conditions,the stress of each component in the steel-concrete composite section is within 160.4 MPa,which is lower than the material …

Wind Tunnel Test Study On Wind-Resistant Performance Of Shuangliu Yangtze River Bridge, Li Xiukun, Wu Xuewei, Yang Can, Peng Xiaobin, Huang Zhiwen

Journal of China & Foreign Highway

The main bridge of Shuangliu Yangtze River Bridge on the Xingang Expressway in Wuhan City is a single-span suspension bridge with a main span of 1 430 m and a bridge tower of 272.75 m.The stiffening girder is in the form of a closed flat steel box girder with a width of 50.5 m.In order to study the wind-resistant performance of the bridge during operation,the performance of vortex-induced vibration of the girder was tested through wind tunnel tests of section model with two different geometric scales of 1∶60 and 1∶30,respectively.The sensitivity of the vortex-induced vibration response to the structural damping …

Comparison Of Calculation Methods For Local Scour In Bridge Pier Foundation Of Piles-Cushion Cap, Liu Hui, Jiang Yanhua, Yan Jiechao

Journal of China & Foreign Highway

In order to analyze the calculation methods for local scour in bridge pier foundation of piles-cushion cap,this paper listed the six common Chinese and foreign calculation methods,described their calculation process and selection of calculation parameters,and analyzed the difference of the calculation methods according to typical engineering examples.The results show that there are differences in the selection of parameters in the calculation methods for local scour in bridge pier foundation of piles-cushion cap in Code for Survey and Design on Hydrology of Railway Engineering (TB 10017—2021 ) and Hydrological Specifications for Survey and Design of Highway Engineering (JTG C 30—2015 ),and …

Application Of Forward-Ba Ck Ana Lysis And Difference Iteration Method For Solving Initial Cable Tension Of Arch Bridge, Xu Yufeng, Li Zihui, Zhang Zhantao

Journal of China & Foreign Highway

This article presented a method that c ombined the forward-back analysis method and the difference iteration method to solve the initial cable tension according to the state of a built bridge for an arch bridge.Given the known target state of the bridge,a reasonable set of initial cable tensions was determined as the initial value of iteration by the forward-back method.These initial tensions were then applied to the calculation model based on the actual construction process.Through the difference iteration method,the initial cable tensions were optimized.The results show that the method can effectively determine the final cable tension that meets engineering precision …