Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4471 - 4500 of 5380

Full-Text Articles in Materials Science and Engineering

Catalytic Effect Of Cl- On Electrodeposition Of Binary Zinc Alloys With Iron Group Metals, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao, A.Za Karia, Rong-Ming Zhou Feb 2001

Catalytic Effect Of Cl- On Electrodeposition Of Binary Zinc Alloys With Iron Group Metals, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao, A.Za Karia, Rong-Ming Zhou

Journal of Electrochemistry

Zinc iron group metal alloys were deposited under coulostatic (10C⋅cm-2) at 40 ℃ chloride baths. The deposited alloys were quantitatively analyzed by Atomic Absorption Spectrometry. The current efficiency, percent content and partial polarization curves were obtained by the results. The morphology of the deposits was observed by means of Scanning Electron Microscopy(SEM). We observe that the electrodeposition of zinc iron group metal alloys is one of the best known examples of anomalous codeposition. We found the catalytic effect of Cl- on the electrodeposition behavior of iron group metal. Overpotential of iron group metal droped abruptly at high …

Go to article

Infared Spectroscopy And Electrical Conductivity Of Copper(Ii) Cinnamate And Iodine-Doped Copper(Ii) Cinnamate, Kumar Krishnan Jan 2001

Infared Spectroscopy And Electrical Conductivity Of Copper(Ii) Cinnamate And Iodine-Doped Copper(Ii) Cinnamate, Kumar Krishnan

Student Works (2000-2009)

Copper(II) cinnamate (CC) was prepared from copper(II) acetate monohydrate and cinnamic acid. It was a light-blue powder. The Fourier Transform Infrared (FTIR) spectrum of CC, recorded as potasium bromide (K.Br) disc, indicated the presence of all bonds and functional groups expected of it and showed that it exist as an equal mixture of cis- and trans- isomers. The conductivity of CC at room temperature was 5.22 x 10⁻¹¹Scm⁻¹. It showed metallic behaviour in the temperature range 78-300 K, and its conduction mechanism obeyed Mott's variable range hopping (VRH) model in the same temperature range. The density of states at Fermi …

Go to article

Preparation And Characterization Of Lithiated Cathode Materials For Lithium Batteries, Shanti Navaratnam Jan 2001

Preparation And Characterization Of Lithiated Cathode Materials For Lithium Batteries, Shanti Navaratnam

Student Works (2000-2009)

Four different cathode materials, LiNiO₂, LiCoO₂, LiCo₀.₂ Ni₀.₈O₂ and LiCo₀.₄, Ni₀.₆O₂ were synthesized by sol - gel technique. The prepared materials were characterized X-ray diffraction pattern, FT-IR and cyclic voltammetry. X-ray diffraction pattern shows crystallinity of materials, increases with higher calcination temperature. From FT- IR studies, it was shown, that the purity of sample also increased with prolong heating at higher temperatures. It was possible to obtain pure and highly crystalline LiNiO₂ after heating for fourteen hours at 800°c. Cyclic voltammetry shows the four prepared materials are suitable for fabrication of cathode, as lithium ions can intercalate and de-intercalate. LiNiO₂ …

Go to article

The Effect Of Aluminium Oxide And Cerium Oxide As Dispersoids In Chitosan-Lithium Acetate Complexes, Hoi Mien Leow Jan 2001

The Effect Of Aluminium Oxide And Cerium Oxide As Dispersoids In Chitosan-Lithium Acetate Complexes, Hoi Mien Leow

Student Works (2000-2009)

In this study, chitosan with 85% deacetylation was used with Ni(OAc)₂·2H₂O as doping salt and Al₂O₃, or CeO₂ as dispersoid. They were mixed in certain weight percentages and dissolved in 100ml of 0.5% acetic acid solution. These solutions were poured into petri dishes and left at room temperature for film formation. Infrared Spectroscopy has shown that there is interaction between chitosan and LiOAc with and without dispersoid. The peaks are shifted. broadened. split and differs in intensity. The electrical conductivity of all samples was calculated using the bulk resistance value obtained from the complex admittance plot. The highest electrical conductivity …

Go to article

Sulphide Based Materials As Potential Anodes In Lithium Ion Cells, Azlin Sanusi Jan 2001

Sulphide Based Materials As Potential Anodes In Lithium Ion Cells, Azlin Sanusi

Student Works (2000-2009)

Sulphides based compounds PbS and SnS have been studied as possible anode material in lithium ion cell. PbS was prepared by the chemical bath deposition technique and SnS by the double decomposition method. Both samples were characterized by the powder X-ray diffraction technique and energy dispersive analysis of X-rays (EDAX). The room temperature electrical conductivity of PbS is 2.6 x 10⁻⁴ S cm⁻¹ and SnS is 5.3 x 10⁻⁷ S cm⁻¹ while at 90°C the electrical conductivity of PbS is 3.3 x 10⁻⁴ S cm⁻¹ and SnS is 2.90 x 10⁻⁶ S cm⁻¹ Cyclic voltammetry determined the potential anode ability …

Go to article

Synthesis And Characterization Of Lithiated Mixed Metal Oxides For Lithium Ion Rechargeable Batteries, Seng Gee Tan Jan 2001

Synthesis And Characterization Of Lithiated Mixed Metal Oxides For Lithium Ion Rechargeable Batteries, Seng Gee Tan

Student Works (2000-2009)

Lilhiated mixed metal oxides for lithium ion rechargeable batteries were prepared by the sol gel technique. Samples consisting of lithium acetate, nickel nitrate, cobalt nitrate, manganese acetate and aluminium fluoride were characterised using X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIRS). Energy Dispersive Analysis of X-rays (EDAX) w1d Cyclic Voltammetry (CV). Thermal characterization shows that the acetates, nitrates and fluorides of precursors material deform at temperature between 50° to 100°C and the products begin to form at a temperature between 264°C to 271°C. FTIR studies show that the materials must be heated for a longer time …

Go to article

Effect Of Electron-Attracting Groups On The Thermal Stability Of Subtituted Copper (Ii) Benzoate, Fauziah Kamaruddin Jan 2001

Effect Of Electron-Attracting Groups On The Thermal Stability Of Subtituted Copper (Ii) Benzoate, Fauziah Kamaruddin

Student Works (2000-2009)

Copper(II) benzoate, copper(II) 4-fluorobenzoate, copper(II) 4-chlorobenzoate, copper(II) 4-bromobenzoate, copper(II) 4-iodobenzoate, copper(II) pentafluoro benzoate, copper(II) 4-nitrobenzoate and copper(II) 3,5-dinitrobenzoate are potential low dimensional thermally stable molecular electronics. The them1al properties of these samples are investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA reveals that copper(II) benzoate (CB) slowly decomposed at 243.5°C, losing 67.7% of its weight at 515°C. The DSC shows two endotherms separated by an exotherm. The first endotherm at 224°C may due to the breaking of bridging bond to give benzoyloxy radicals. The exotherm at 231°C may due to the formation of volatiles from the decomposition …

Go to article

Characterization Of Lithium Intercalation Oxides Based On Manganese And Copper, Vengidason Seguprakash Jan 2001

Characterization Of Lithium Intercalation Oxides Based On Manganese And Copper, Vengidason Seguprakash

Student Works (2000-2009)

In this study, several lithium intercalation compounds have been synthesized and characterized. Lithium manganese copper oxide cathode materials were prepared by sol gel method using tartaric acid as the gelating agent. Five types of cathode materials were synthesized. The sol gel technique has permitted the synthesis of manganese oxides that are capable of reversibly intercalating large amounts of lithium ions. To see the effect of adding copper to lithium manganese oxide several experiments were carried out. These include X-Ray diffraction to see whether the LiMn₂O₄ lattice has widened or collapsed. It was seen that LiMn₂O₄ and LiCu₂O₂ XRD patterns were …

Go to article

Effects Of Argon Dilution Of Silane On The Optical Properties And Surface Morphology Of Hydrogenated Amorphous Silicon, Choon Kheam Lim Jan 2001

Effects Of Argon Dilution Of Silane On The Optical Properties And Surface Morphology Of Hydrogenated Amorphous Silicon, Choon Kheam Lim

Student Works (2000-2009)

Hydrogenated amorphous silicon (a.Si:H) was prepared using the d.c plasma grow discharge system. Two sets of samples were prepared and studied. The first set of samples referred to as the high argon dilution films were prepared from the discharge of pure silane at flow-rate of 5sccm and silane at the same flow-rate diluted in argon at flow-rates of 5, 10 and 15sccm. Similarly, the second set of sample referred to as the low argon dilution films were prepared from the discharge of pure silane at flow-rate of20sccm and silane at the same flow-rate diluted in argon at the flow-rates mentioned …

Go to article

Evidence Of Nanostructure In Multilayer Cdse Thin Films, Suganthi Devadason Jan 2001

Evidence Of Nanostructure In Multilayer Cdse Thin Films, Suganthi Devadason

Student Works (2000-2009)

Cadmium Selenide multilayer thin films have been prepared using physical vapour deposition method. Alternate layers of Cadmium and Selenium are deposited on unheated glass substrates. Morphological study of the samples has been done using SEM micrographs with a magnification of 5000. The EDX analysis gives the quantitative atomic percentage content of elements present in the samples. It is found that the high Cadmium content in the samples increased the crystallinity. From XRD measurements, it is evident that many films are polycrystalline in nature with a peak corresponding to < 111 > plane orientation of the zinc blende structure. The lattice constant of the …

Go to article

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry Jan 2001

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a coolant and a target material. There have been studies of LBE, especially by the Russians, but a fundamental understanding and verification of its role in the corrosion of steels is still very 2 incomplete. Post-experiment testing and analysis will be performed on steel samples that have been in intimate contact with LBE. Chemical alterations and resulting chemical species will be measured at the steel surface. Techniques to be …

Go to article

Dynamics Of Polyacrylates In Concentrated Chloroform Solutions, Frank D. Blum, Raj B. Durairaj Jan 2001

Dynamics Of Polyacrylates In Concentrated Chloroform Solutions, Frank D. Blum, Raj B. Durairaj

Chemistry Faculty Research & Creative Works

The dynamics of polymers in polymer solutions have not been probed in great enough detail to provide a coherent picture of the behavior of these polymers, especially in more concentrated solutions. To help understand this behavior further, we have prepared a series of backbone-labeled polymers including poly(n-butyl acrylate)-d1 (PNBA). These provide a basis for comparison of the behavior among a group of related polymers. The dynamics have been probed by using deuterium relaxation times. Since the relaxation times are relatively fast and the quadrupolar relaxation mechanism is well understood, data from this technique provide a convenient means for comparison of …

Go to article

Thermal Analysis Of Ultrathin Ps-R-Pmma Copolymer Films On Silica, Bing Zhang, Frank D. Blum Jan 2001

Thermal Analysis Of Ultrathin Ps-R-Pmma Copolymer Films On Silica, Bing Zhang, Frank D. Blum

Chemistry Faculty Research & Creative Works

Composite materials represent a major part of man-made materials that are used in many applications. The interaction of polymers with surfaces plays a crucial role in the final properties of these materials and, by understanding the surface processes and adsorption mechanisms, better systems can be designed. Therefore, the behavior of polymer molecules at interfaces has been the topic of many studies in recent years and a rough picture has been obtained. Keddie et al. Obtained experimental results showing the dependence of the glass transition temperature (Tg) on the thickness of supported polystyrene films using ellipsometry. Later, they also investigated supported …

Go to article

Dynamics Of Poly(Vinyl Acetate)-D₃ On Silica, Robert D. O'Connor, Frank D. Blum, Gu Xu Jan 2001

Dynamics Of Poly(Vinyl Acetate)-D₃ On Silica, Robert D. O'Connor, Frank D. Blum, Gu Xu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Poly(vinyl acetate) (PVAc) is an important polymer in applications because of both its bulk and surface characteristics. Its chain architecture gives it a low Tg and, generally, good qualities for processing and applications, which include paints, adhesives, thin films and surface coatings. In this study, we investigate the surface dynamics of PVAc absorbed onto silica with deuterium nuclear magnetic resonance (2H NMR). For dynamics studies, 2H NMR is an excellent technique because it uses an innocuous probe that can report on correlation times (τc) from approximately 10-8 s to 10 s. We report the use of two-dimensional exchange NMR (2D-X) …

Go to article

Glass Transition Behavior Of Pmma Thin Films, Moses T. Kabomo, Frank D. Blum Jan 2001

Glass Transition Behavior Of Pmma Thin Films, Moses T. Kabomo, Frank D. Blum

Chemistry Faculty Research & Creative Works

In the last decade there has been an increased interest in the study of the properties of supported thin polymer films. This has been prompted by the incorporation of thin films into device applications and many other technologies. Although not without controversy, a large body of experimental work indicates departures from bulk behavior by thin films. Strong evidence from both theoretical and experimental work shows that the interaction of polymer with a substrate alters the polymer conformation and mobility. A variety of techniques has been employed to probe the mobility of thin supported polymer films. Some of these techniques indirectly …

Go to article

Graduated Segmental Mobility In Polymer Layers On Silica, Frank D. Blum, Crystal E. Porter, Wuu-Yung Lin Jan 2001

Graduated Segmental Mobility In Polymer Layers On Silica, Frank D. Blum, Crystal E. Porter, Wuu-Yung Lin

Chemistry Faculty Research & Creative Works

The behavior of thin polymer layers on oxide substrates has gotten a great deal of attention as the size of materials, and hence polymer films, has gotten smaller. Indeed, the properties of adsorbed polymers are such that they can be different from those of bulk polymers, especially when the films are very thin. A wide variety of studies have been made on adsorbed polymers and sometimes the results seem contradictory. One of the properties often measured in thin films is the apparent glasstransition temperature, Tg. In principle, many techniques are sensitive to phenomenological changes occurring around Tg and, therefore, can …

Go to article

Electrochemical Hydrogen Storage Properties Of Carbon Nanotubes, Xue Qin, Xue-Ping Gao, Feng Wu, Hong Liu, Ying Lan, Hua-Tang Yuan, De-Ying Song, Pan-Wen Shen Nov 2000

Electrochemical Hydrogen Storage Properties Of Carbon Nanotubes, Xue Qin, Xue-Ping Gao, Feng Wu, Hong Liu, Ying Lan, Hua-Tang Yuan, De-Ying Song, Pan-Wen Shen

Journal of Electrochemistry

The electrochemical properties of carbon nanotubes (CNTs) electrode have been investigated in this paper. The high discharge capacity of 200 mAh·g-1 was measured for the CNTs Ni electrode at a discharge density of 200 mAh·g-1 . CNTs-Ni electrode, the high electrochemical activity and the long cycle life were observed. The electrochemical mechanism of hydrogen adsorption and oxidation at the CNTs Ni electrode was studied by cyclic voltammertry method.

Go to article

The Study Of Pretreatment For The Determination Of The Conventional Anion In Sea Water By Ic——The Method Of Electrolysing Argentine Electrode, Lei Guo, Wei Yang, Rong-Zong Hu Nov 2000

The Study Of Pretreatment For The Determination Of The Conventional Anion In Sea Water By Ic——The Method Of Electrolysing Argentine Electrode, Lei Guo, Wei Yang, Rong-Zong Hu

Journal of Electrochemistry

The method of pretreatment to determine trace amounts of Br-, NO3- and SO42- in sea water by ion chromatography was proposed, by which the electrolysing argentine electrode was used to minimize the disturbance of Cl-. The results indicate that the method is simple, convenient, quick and efficient with recovery rates over 95 percent.

Go to article

Effect Of High Concentration Lithium Bromide Solution On Electrochemical Behavior Of Low Alloy Steel At High Temperature, Jian-Wei Guo, Cheng-Hao Liang Nov 2000

Effect Of High Concentration Lithium Bromide Solution On Electrochemical Behavior Of Low Alloy Steel At High Temperature, Jian-Wei Guo, Cheng-Hao Liang

Journal of Electrochemistry

By electrochemical measurements and weight loss experiments, the effect of MoO42- on low alloy steel's electrochemical behaviors was investigated at high temperature in 55%LiBr+0.07 mol/L LiOH solution. The results showed that MoO42-, as an anodic inhibitor, formed passive film rapidly and impeded both anodic and cathodic procedures. Moreover, Na2MoO4 prevented corrosion effectively in 55%LiBr+0.07 mol/L LiOH solution when its concentration is more than 200 mg/L. The pitting potential increased accompanying to the arising of Na2MoO4 concentration. Some elements of alloy strengthened resistance to corrosion, shch as chromium and nickel, …

Go to article

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou Nov 2000

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou

Journal of Electrochemistry

The electro-oxidation of ethanol on nm-Pt/GC electrode in alkaline solutions containing 0.02 mol·L-1 NaOH+0.1 mol·L-1 CH3CH2OH was investigated by using cyclic voltammetry and in-situ FTIR spectroscopy. The experimental results demonstrated that the main product of ethanol oxidation is CH3COO-, only very small amount of CH 3CHO has been determined simultaneously. In contrast with the dual path reaction mechanism for the oxidation of ethanol in acid media, the oxidation of ethanol in alkaline media didn't pass through the dissociative adsorption, and no adsorbed species could be determined even using a …

Go to article

Template Synthesis Of Nano-Structured Electrode Materials And Its Electrochemical Performance, Jian Zhao, Quan-Yong Gao, Yong Yang, Zu-Geng Lin Nov 2000

Template Synthesis Of Nano-Structured Electrode Materials And Its Electrochemical Performance, Jian Zhao, Quan-Yong Gao, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

In this letter, various nano structured materials such as spinel LiMn2O4 nanotubes/nanowires and carbon nanotubes have been prepared by using porous alumina template. The prepared template and materials have been characterized by AFM and TEM techniques. It is shown that size of the nanotubes can be conveniently controlled by using template method. Some preliminary results of cyclic voltammetry about nano structured LiMn2O4 are also reported.

Go to article

A Study Of Monitoring Corrosion Of Metal Via An Optic Waveguide Sensing Method, Xue-Ming Li, Wei-Ming Chen, Shang-Lian Huang, Na Zhang, Zong-Qing Huang Nov 2000

A Study Of Monitoring Corrosion Of Metal Via An Optic Waveguide Sensing Method, Xue-Ming Li, Wei-Ming Chen, Shang-Lian Huang, Na Zhang, Zong-Qing Huang

Journal of Electrochemistry

An optical wave guide sensing method was proposed for monitoring corrosion of metal in outdoors steel structures. Replacing the cladding of wave-guide with metal film in a particular location, the method takes the metal film as the corrosion sensitive film. The experiment of waveguide sensor was carried out on a 721 colorimetric vessel, with which the soution is held in itself and the light is propagated in its sidewall. A Fe-C alloy film was electroplated onto the inner sied of vessel to form the corrosion sensitive film. The structure of the Fe-C alloy film was studied by XRD, EDX and …

Go to article

A Study Of The Adsorption Behaviors On The Surface Of Gold Electrode By In-Situ Electrochemical Raman Spectroscopy, Xia-Qin Wu, Xiao-Wei Cao, Zhe-Su Wang, Xiao-Yun Meng, Zong-Rang Zhang Nov 2000

A Study Of The Adsorption Behaviors On The Surface Of Gold Electrode By In-Situ Electrochemical Raman Spectroscopy, Xia-Qin Wu, Xiao-Wei Cao, Zhe-Su Wang, Xiao-Yun Meng, Zong-Rang Zhang

Journal of Electrochemistry

The results of in-situ measurements with Raman spectroelectrochemical thchnique on bare gold electrode and adenine modified gold electrode were reported. The adsorption behaviors of adenine and superoxide dismutase (SOD) and their interactions with gold electrode were analyed. The mechanism of promoted electron transfer process of SOD in the presence of adenine at gold electrode surface is discussed.

Go to article

Study On Electrodeposition Of Ingaas Thin Film, Yu-Chun Li, Xi-Lian Wang, Jing-Ke Han, Ai-Zhen Han, Yuan-Kai Gao, Zhi-Wei Yang Nov 2000

Study On Electrodeposition Of Ingaas Thin Film, Yu-Chun Li, Xi-Lian Wang, Jing-Ke Han, Ai-Zhen Han, Yuan-Kai Gao, Zhi-Wei Yang

Journal of Electrochemistry

The principle and the experimental method of the electrodeposition are discribed in detail in this paper. InGaAs thin film was prepared by using optimized electrodeposited conditions. The radiative wave length of the film was between 1.3～1.5 μm, the composition of the film was analyzed by energy spectrometer and the transmission spectrum of the film was measured by spectrophotometer and monochromator. The V-I chractristic of the conductive type and the topography of the InxGa1-xAs film were also studied.

Go to article

The Memory Effect Of Mh-Ni Battery, De-Ming Xie, Jian-Ming Wang, Jian-Qing Zhang, Chu-Nan Cao Nov 2000

The Memory Effect Of Mh-Ni Battery, De-Ming Xie, Jian-Ming Wang, Jian-Qing Zhang, Chu-Nan Cao

Journal of Electrochemistry

The memory effect of MH-Ni battery was investigated. The depth of discharge, discharge rate and cycle number influence the memory effect greatly. A few completely full charge/discharge cycles could eliminate it. The existence of the memory effect had nothing to do with zinc element. During the course of life cycling at low DOD (degree of discharge), the smaller the discharge current was, the lower was the maximum charge voltage. In addition, discharge voltage and discharge capacity drop fast at the beginning, gradually leveled off at about a value. If the discharge current was increased, the discharge capacity was obviously less …

Go to article

The Development Of Carbon Monoxide Tolerant Catalysts For Proton-Exchange Membrane Fuel Cell, Zhong-Jun Hou, Hong-Mei Yu, Bao-Lian Yi, Ming Han Nov 2000

The Development Of Carbon Monoxide Tolerant Catalysts For Proton-Exchange Membrane Fuel Cell, Zhong-Jun Hou, Hong-Mei Yu, Bao-Lian Yi, Ming Han

Journal of Electrochemistry

High over-potential of proton exchange membrane fuel cell (PEMFC) anode caused by carbon monnoxide poisoning when reformate or methanol is used as fuel is main obstacle to the high performance of PEMFCs. Using carbon monoxide tolerant catalysts is the most hopeful way to solve the CO problem. The CO poisoning problem is reviewed briefly in this paper, and the development of CO tolerant catalysts is introduced in details, including electrocatalysts activity, preparation method and mechanism of tolerance to CO.Mo and W can improve catalysts' CO tolerance. Multi-component catalysts are expected to be more tolerant to CO.

Go to article

Electrochemical Polymerization Of Biphenyl And P-Terphenyl In Organic Solvent, Sheng-Yun Cui Nov 2000

Electrochemical Polymerization Of Biphenyl And P-Terphenyl In Organic Solvent, Sheng-Yun Cui

Journal of Electrochemistry

The electro-oxidation of ethanol on nm-Pt/GC electrode in alkaline solutions containing 0.02 mol·L-1 NaOH+0.1 mol·L-1 CH3CH2OH was investigated by using cyclic voltammetry and in-situ FTIR spectroscopy. The experimental results demonstrated that the main product of ethanol oxidation is CH3COO-, only very small amount of CH 3CHO has been determined simultaneously. In contrast with the dual path reaction mechanism for the oxidation of ethanol in acid media, the oxidation of ethanol in alkaline media didn't pass through the dissociative adsorption, and no adsorbed species could be determined even using a …

Go to article

Investigation Of A Complex Lithium Cobalt Nickel Oxide As Lithium Ion Battery Cathode Materials Prepared By A New Citrate Sol-Gel Method, Jing-Li Han, Qing-Guo Liu Nov 2000

Investigation Of A Complex Lithium Cobalt Nickel Oxide As Lithium Ion Battery Cathode Materials Prepared By A New Citrate Sol-Gel Method, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

The synthesis and electrochemical characteristics of lithium cobalt nickel oxide as cathode materials for rechargeable lithium batteries were investigated. It was clarified from these investigations that lithium cobalt nickel oxide has been produced from basic cobalt carbonate,basic nickel carbonate, lithium carbonate, and citrate. LiNi0.8Co 0.2O2 prepared under the stream of oxygen gas showed a higher cycling capacity of (～190 mAh·g-1).

Go to article

Application Of Tree-Structured Regression For Regional Precipitation Prediction Using General Circulation Model Output, Xiangshang Li, David J. Sailor Nov 2000

Application Of Tree-Structured Regression For Regional Precipitation Prediction Using General Circulation Model Output, Xiangshang Li, David J. Sailor

Mechanical and Materials Engineering Faculty Publications and Presentations

This study presents a tree-structured regression (TSR) method to relate daily precipitation with a variety of free-atmosphere variables. Historical data were used to identify distinct weather patterns associated with differing types of precipitation events. Models were developed using 67% of the data for training and the remaining data for model validation. Seasonal models were built for each of 2 US sites: San Francisco, California, and San Antonio, Texas. The average correlation between observed and simulated daily precipitation data series is 0.75 for the training set and 0.68 for the validation set. Relative humidity was found to be the dominant variable …

Go to article

The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou Aug 2000

The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou

Journal of Electrochemistry

The cyclic voltammograms for Pb - 0.5 at% Ca - 1.5 at% Sn and Pb - 0.5 at% Ca - 1.5 at% Sn containing a certain amount of cerium in 4.5 mol·dm-3 H2SO4 at 20℃ were measured between 0.6 V and 1.4 V(vs. Hg/Hg2SO4). The growth rate of the anodic Pb(Ⅱ) films formed on the mentioned alloy electrodes at 0.9 V in the same sulfuric acid medium was investigated using the Linear Sweep Voltammetry. The variation with electrode potential of the real part of the impedence (Z’) for the anodic Pb(Ⅱ) films …

Go to article

First Prev Next Last