Materials Science and Engineering Commons^™

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Quarterly Progress Report 11/16/01- 2/15/02, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the AAA proposed application.

Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with very limited density. The transport of oxygen and corrosion products, their interaction and variation of corrosion/precipitation along the flow are not well understood.

The first subtask of this project involves using a …

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 11/16/01- 2/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible.

This process works well for the fabrication of metal fuel pins traditionally composed of alloys of uranium and plutonium, but does not work well when highly volatile actinides are included in the melt. The problem occurs both during the extended time period required to superheat the alloy melt as well as when the chamber must be evacuated. …

Hydrogen-Induced Embrittlement Of Candidate Target Materials For Applications In Spallation-Neutron-Target Systems, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the effect of hydrogen on cracking of candidate target materials for applications in spallation-neutron-target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The test materials will undergo appropriate thermal treatments prior to being hydrogen-charged by potentiostatic cathodic polarization technique in a simulated aqueous environment at different temperatures of interest. The specimens, upon completion of testing, will be metallographically examined. Further, the scanning electron microscopy (SEM) will be used to determine the extent and nature of cracking in the specimens tested. The thrust of the proposed …

Effect Of Ga Content On Defect States In Cuin1-XGaXSe2 Photovoltaic Devices, Jennifer T. Heath, J. David Cohen, William N. Shafarman, Dongxiang Liao, Angus Rockett

Faculty Publications

Defects in the band gap of CuIn_1-xGa_xSe₂ have been characterized using transient photocapacitance spectroscopy. The measured spectra clearly show response from a band of defects centered around 0.8 eV from the valence band edge as well as an exponential distribution of band tail states. Despite Ga contents ranging from Ga/(In+Ga)=0.0 to 0.8, the defect bandwidth and its position relative to the valence band remain constant. This defect band may act as an important recombination center, contributing to the decrease in device efficiency with increasing Ga content.

Formation Of Copper Dots In Copper Decoration Technique, Swee Yong Pung

Student Works (2000-2009)

Copper ions are dissolved from highly pure copper plate into the methanol during copper decoration process. As a result, copper concentration in methanol is increased with time. The copper concentration in methanol measured by ICP-OES is correlated well with the calculated value based on the magnitude of current and time during the process. Consequently, higher magnitude of current can be applied to build up copper concentration in methanol in shorter period. When copper ions are ejected in methanol, they are positively charged. They experience force from electric field and migrate towards oxide surface. Eventually, these copper ions will be discharged …

Analysis Of Plastics In The Tyre Industry Using Fourier Transform Infrared Techniques, Differential Scanning Calorimetry And Softening Point Apparatus, Ching Ching Loh

Student Works (2000-2009)

The plastics in a tyre factory were investigated. The plastics were analysed by FTlR-transmission, FTI.R-ATR, softening point apparatus as well as a Differential Scanning Calorimeter. All the plastics were detected to be polyethene based with melting point range of 107 to 125°C. It was also observed that The FTIR transmission spectrum can be different from the FTIR-ATR spectrum. The FTIR-ATR spectrum gives a higher band intensity at longer wavelengths compared to the FTIR-Transmission spectrum. Interference fringes can be present in the FTlR transmission spectrum. In addition to the above, it was also found that the melting point of plastics obtained …

Oxidation-Induced Stacking Fault In (100) And (111) Silicon Wafers, Mei Keat Liang

Student Works (2000-2009)

Oxidation-induced stacking fault (OISF) dimension and density change on (100) and (111) wafers, as a result of repeated preferential etching were studied using AFM. optical microscope and angular polishing techniques. Density on (100) and (111) wafers is independent of surface removal up to 3.0µm. This indicates the single layer nature of OISF formed from the sand blasted wafer. Besides having higher density, OISFs from (100) wafer were longer than OISF from (111) wafer. OISF width increases linearly with surface removal however the length does not change significantly with surface removal. ln the OISF normal depth studies using angular polishing technique, …

The Effect Of Weak Acids Hydrolysis On The Sol-Gel Fabrication Of Silica Thin Film, Abdul Hamid

Student Works (2000-2009)

-

Selective Separation Of Lead (Ii) And Cadmium (Ii) From Simulated Wastewater Solutions By Electrodeposition On Carbon Based Electrodes, Pek Yew Liew

Student Works (2000-2009)

The efficiency of electrodepositing Pb and Cd onto two carbon based electrodes glossy carbon electrode (GCE) and activated carbon paste electrode (CPE) and the selectivity of separating these metals from mixtures were investigated by cyclic voltammetry and square wave voltammetry. Good efficiency was observed in depositing Pb onto these electrodes but for Cd deposition. the efficiency was limited by the hydrogen evolution reaction at pH 3 and the dissociation of water al pH S. However, chis efficiency was improved when some amount of Pb was preplated onto the electrodes. When excess malonic acid was present in the system. the deposition …

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a spallation target and as a blanket coolant. There have been previous studies of LBE, especially by the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. However, a fundamental understanding and verification of its role in the corrosion of steels is still very incomplete. We have begun a program of post-experiment testing and analysis on steel samples that have been in intimate …

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

This research program will analyze various steel samples that have been exposed to LBE as part of the national program to develop LBE and transmutation technologies. This information will be paramount in developing engineering efforts to control, avoid, and/or minimize the effect of corrosion of steels by LBE in transmuter and LBE systems. Additionally, this program provides UNLV researchers with hands-on experience that will be crucial in developing the UNLV LBE program, supporting the University’s mission with the ISTC target complex, and the future development of additional facilities to examine LBE systems.

The research group plans to test the hypothesis …

Corrosion Of Steel By Lead Bismuth Eutectic: Year 1 Annual Report, John Farley

Transmutation Sciences Materials (TRP)

The goal is to investigate the corrosion of stainless steel by lead-bismuth eutectic (LBE), which has been proposed for use as a blanket coolant and a spallation target in the transmuter.

Hydrogen-Induced Embrittlement Of Candidate Target Materials For Applications In Spallation-Neutron-Target Systems, Ajit K. Roy, Brendan O'Toole, Zhiyong Wang, David W. Hatchett

Transmutation Sciences Materials (TRP)

Spallation-neutron-sources, such as those under investigation for use in accelerator-driven transmutation systems, generate neutrons through the collision of high-energy protons, or charged hydrogen atoms, with heavy metal targets such as lead. As a result, these systems also tend to deposit a significant amount of hydrogen in the materials of the transmuter target and superstructure. This can result in accelerated corrosion and changes in the properties of the exposed materials. Of particular importance is a phenomenon called hydrogen embrittlement, in which materials lose their ductility (ability to deform under stress) and become brittle (more susceptible to fracture) after reacting with hydrogen. …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Task V 4th Quarterly Report, Samir Moujaes

Transmutation Sciences Materials (TRP)

The project is moving on target with the newly realigned objective set for the Phase I. Through close communications with Dr. Li and Dr. Jinsuo Zhang from LANL a realignment of the simulation work has been recommended. The reason for that is the vendor of STAR-CD/CHEMKIN had not perfected yet the final coupling of the post processing of output for any potential surface chemistry reaction taking place on the inside pipe surface of the LBE loop. This is because the coupling of CHEMKIN and STAR-CD has been done fairly recently.

Our final effort has been to generate using an innovative …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

Many of the international efforts to develop transmutation technology, including the U.S., Russian, and European scientific communities, have determined that lead bismuth eutectic (LBE) is a potential material for use as a both a spallation target and a coolant. To exploit this potential, a more thorough understanding of the effect and rates of corrosion on steels, particularly non-Russian alloys, inside the LBE systems is required. Properly controlling the oxygen content in LBE systems has been observed to drastically reduce the corrosion of structural steels in LBE. However, the transport of oxygen and formation of corrosion products is not well understood; …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

Alloy EP-823 has been developed as a structural material for Lead Bismuth Eutectic (LBE) systems, such as those under development for nuclear transmutation systems, as well as other applications. However, very little data regarding the mechanical properties of this alloy exists in the open literature, particularly in the temperature regime of interest for transmutation systems. To address this need, the UNLV research team, in collaboration with researchers from Los Alamos National Laboratory, has developed a research program to evaluate tensile properties of Alloy EP-823 stainless steel at elevated temperatures, which is not being performed at any other facility to date. …

Thermoelectric Properties Of Bi2sr2co2o9 Whiskers Under Hydrostatic Pressure, F Chen, Kevin L. Stokes, Ryozi Funahashi

Physics Faculty Publications

We report the temperature dependence of thermopower (S) in the ab plane of Bi2Sr2Co2O9 {BC-222} single crystalline whiskers under high pressure up to 1.2 GPa. Special modifications were made to our high-pressure transport measurement system to improve the measurement accuracy of S for whiskers with high resistance. Pressure improved the contact resistance dramatically. We observed a slight decrease of  S and four-wire electrical conductivity (sigma) under high pressure. As a result, the power factor (S2sigma) was decreased less than 20% by pressure. From the temperature dependence of sigma, the band gap of BC-222 whiskers increase very slightly …

Compostability Of Degradable Plastics And Its Use In Solid Waste Disposal / Putri Nadzrul Faizura Bt Megat Khamaruddin., Putri Nadzrul Faizura Megat Khamaruddin

Student Works (2000-2009)

Plastic waste generation and quantity generated is a growing concern in many countries including Malaysia. Plastic waste contributes the third highest waste volume in Malaysian municipal solid waste (MSW) next to putrescible waste and paper. ln the year 2000, plastic waste in MSW of Kuala Lumpur was 24.4% by weight from the MSW and most of the plastic waste was dumped into landfills. Landfills in Malaysia are reducing in its useful life as the amount of waste generated is growing every year by 2% and they have become an undesirable option of getting rid of plastic waste because of the …

Atomic Hydrogen Cleaning Of Inp(100): Electron Yield And Surface Morphology Of Negative Electron Affinity Activated Surfaces, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Atomic hydrogen cleaning of the InP(100) surface has been investigated using quantitative reflection high-energy electron diffraction. The quantum efficiency of the surface when activated to negative electron affinity was correlated with surface morphology. The electron diffraction patterns showed that hydrogen cleaning is effective in removing surface contaminants, leaving a clean, ordered, and (2×4)-reconstructed surface. After activation to negative electron affinity, a quantum efficiency of ∼6% was produced in response to photoactivation at 632 nm. Secondary electron emission from the hydrogen-cleaned InP(100)-(2×4) surface was measured and correlated to the quantum efficiency. The morphology of the vicinal InP(100) surface was investigated using …

High-Efficiency Solar Cells Based On Cu(Inal)Se[Sub 2] Thin Films, S. Marsillac, P. D. Paulson, M. W. Haimbodi, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

A Cu(InAl)Se₂solar cell with 16.9% efficiency is demonstrated using a Cu(InAl)Se₂thin film deposited by four-source elemental evaporation and a device structure of glass/Mo/Cu(InAl)Se₂/CdS/ZnO/indium tin oxide/(Ni/Algrid)/MgF₂. A key to high efficiency is improved adhesion between the Cu(InAl)Se₂ and the Mo back contact layer, provided by a 5-nm-thick Ga interlayer, which enabled the Cu(InAl)Se₂ to be deposited at a 530 °C substrate temperature. Film and device properties are compared to Cu(InGa)Se₂ with the same band gap of 1.16 eV. The solar cells have similar behavior, with performance limited by recombination through …

Effect Of Cr3+ And So42- On The Structure Of Rust Layer Formed On Steels By Atmospheric Corrosion, Masato Yamashita, Hitoshi Uchida,, Desmond C. Cook .

Physics Faculty Publications

The effect of chromium ion (Cr³⁺) and sulfate ion (SO₄^2-) on the structure of the rust layer formed by thin electrolyte-film corrosion of low-alloy steels has been examined. By using X-ray diffraction spectroscopy, it was found that coexistence of Cr³⁺ and SO₄^2- in the electrolyte film covering the steel surface quickly forms the Cr-goethite (α-(Fe _1-X, Cr_X)OOH) layer which has been known as the final protective rust layer. Scanning vibrating electrode measurements showed that the rust layer formed under the electrolyte film containing Cr³⁺ and SO₄^{2- …}

Effect Of Oxygen Vacancies On The Magnetic Structure Of The La₀.₆Sr₀.₄Feo3-Δ Perovskite: A Neutron Diffraction Study, Zili Chu, William B. Yelon, Jinbo Yang, William Joseph James, Harlan U. Anderson, Yixiang Xie, Satish K. Malik

Physics Faculty Research & Creative Works

Magnetic interactions in perovskite compounds of the type La_1-xSr_xMO_3-δ (M=3d transition such as Mn and Fe) are presumed to arise through a super exchange between 3d electrons of the magnetic ions via oxygen orbitals. The magnetic structure of La_0.6Sr_0.4FeO_3-δ has been studied with neutron diffraction. Oxygen vacancies were created by annealing samples under various gases including N₂, air and mixtures of CO/CO₂. All La_0.6Sr_0.4FeO_3-δ compounds maintain the rhombohedral structure (space group R3̄c). The air- or oxygen-annealed samples have almost no oxygen …

Thermogravimetric Studies Of Pmma On Silica, Bing Zhang, Frank D. Blum

Chemistry Faculty Research & Creative Works

The thermal degradation of poly(methyl methacrylate) (PMMA) has been studied extensively. It is well accepted that the degradation process is a radical chain reaction involving initiation, depropagation, transfer, and termination reactions. In the degradation process, the factors having observable effects on the decomposition behavior include molecular mass, polydispersity, tacticity, and sample dimensions. The effects of tacticity on the degradation behavior of PMMA were investigated by Kashiwagi et al., Jellinek et al. And Chiamtore et al. The results indicated that both isotactic and syndiotactic PMMA have similar decomposition pathways and activation energies. Isotactic PMMA will decompose at a slightly lower temperature …

Effect Of Polymer-Surface Mobility On Adhesion In Poly(Methyl Methacrylate)-Tape System, Bhavesh C. Gandhi, Frank D. Blum, Lokeswarappa R. Dharani

Chemistry Faculty Research & Creative Works

The interaction between two polymer layers, especially adhesion between them, plays an important role in polymer processing and other applications. Detailed knowledge of the molecular structure and dynamics of polymer interfaces, and how they relate to macroscopic mechanical properties, should help designers construct more functional systems. Unfortunately, there have been few studies where both molecular and macroscopic studies have been performed on similar systems. In previous studies from our group, we have probed the dynamics of poly(methyl acrylate) (PMA) and thermal behavior of poly(methyl methacrylate) (PMMA) on silica. These studies helped us paint a picture for strongly bound molecules on …

Corrosion Of Steel In Sea-Bottom Mud Of Nothern China Sea Area, Gong-Yu Guo, Jing-Lei Zhang, Bao-Rong Hou, Fang-Ying Yang

Journal of Electrochemistry

Corrosion experiments of A₃, 16Mn, 20^# as well as ZCE36-225 steel were carriedout in southern Bohai sea and Qingdao sea areas. The sea-bottom mud in southern Bohai sea areais the sandy mud and that in Qingdao sea area is pure beach sand. In this experiment, the compareing test of two modes with electric connected and non-electric connected modes was carriedout. The experiment results showed that: 1) The corrosion rate of steel in sea-bottom mud has astrong relation with mud types. The corrosion rates of steels in pure beach sand are much higherthan those in sandy mud. 2) …

Electrosynthesis Of A New Electroactive Poly(2,2'-Diaminophenyloxydisulfide), Yu-Zhi Su, Yan-Wen Rao, Ye Yang, Mei-Bing Chen, Yin-Ling Qiu, Yong-Hua Zhang, Ke-Cheng Gong

Journal of Electrochemistry

A new electroactive poly (2,2' diaminophenyloxydisulfide) (PDAPD) was successfully synthesized from acetonitrile(AN)/tetrahydrofuran (THF) solutions containing the supporting electrolyte (LiClO₄) and the various kinds of acids (HCl, CF₃COOH, CCl₃COOH) on Pt electrode by consecutive cyclic voltammiry. The effects of the concentrations of supporting electrolyte (LiClO₄) and acid (HCl, CF₃COOH, CCl₃COOH) on electrodepositon of PDAPD film were investigated. The best experimental conditions for electrosynthesis of a highly electroactive conducting polymer film are that the concentrations are 0.1 mol/L and between 0.05 mol/L～0.5 mol/L,respectively for LiClO₄ and HCl.

Studies On The Anti-Corrosion Behavior Of Corrosion Inhibitor To The Ship Building Steel In Moist Air, Yong-Tao Zhao, Jian-Hua Wu, Jia Wang

Journal of Electrochemistry

The anti corrosion behavior of 907A steel, which were covered with thin inibitor layers in moist air, were simulated, The electrochemical measurements, including EIS method and the coulostatic method, were used to atmospheric corrosion monitor (ACM) under thin inhibitor layers to study the mechanism of rust preventiion. the results shown that the mechanism of inhibiting corrosion was different from the steel immersed in inhibitor solutin, the anodic reaction process under thin inhibitor layers had the advantage over that of cathodic for blocking the speed of corrosion. At the later stage of soaking, the blend feature due to the electrochemical process …

The Investigation Of Prepare Condition For Micropores Membranes From Poly(Vinylidene Fluoride), Xu-Mei Ren, Feng Wu, Ying Bai, Hang-Jun Li, Xue-Jie Huang

Journal of Electrochemistry

The micropores membranes from Poly (vinylidene fluoride) were prepared by the phase inversion process. The effects of the casting solution composition, exposure time prior to coagulation and temperature of the coagulation bath on properties of prepared membranes were investigated. For all prepared membranes an asymmetric structure, sometimes without a dense skin layer, was observed.

An Investigation Of Structural Properties Of Li-Al-Mixed Doped Spinels Materials Li 1+XAlYMn Z-YO4, Zi-Shan Zheng, Zi-Long Tang, Zhong-Tai Zhang, Wan-Ci Sheng

Journal of Electrochemistry

Al and Li elements were co-doped into host spinel lithium manganese oxide by a simple and economical preparation technology. There was an investigation of the influence of doped Al contents on the initial capacity and cycling performance of the materials. The investigation of the XRD patterns, the analysis of the SEM micrographs and the determination of IR spectroscopy showed that the particles of dopant materials are fine, narrowly distributed and well crystallized, and the bonds Mn-O are stronger than these of undoped materials. The resulted materials have a high initial capacity of 119 mAh/g and good cycling characterization. The capacity …

Studies On The Properties Of The Anodic Films Formed On Lead- Lanthanum And Lead-Samarium Alloys In Sulfuric Acid Solution, Hou-Tian Liu, Chun-Xuao Yang, Hai-Heng Liang, Jiong Yang, Wei-Fang Zhou

Journal of Electrochemistry

AC voltammetry, linear sweep voltammetry, and cyclic voltammetry were applied to study the anodic corrosion of Pb, Pb-1.0 at% La and Pb-1.0 at% Sm electrodes in 4.5 mol·dm^-3 H₂SO₄ solution (25 ℃). The experiment results show that samarium can inhibit the anodic corrosion of lead and decrease the impedance of anodic Pb(Ⅱ) film. Lanthanum can also decrease the impedance of the anodic Pb(Ⅱ)film, but the effect is smaller.