Materials Science and Engineering Commons^™

Direct Computations Of Spatially Resolved Viscoelastic Moduli Of Biomolecular Condensates, Liwen Gu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Biomolecular condensates are viscoelastic materials formed by liquid-liquid phase separations (LLPS) of biopolymers. In this study, we develop a modified graph Laplacian-based collective model to characterize viscoelastic heterogeneity within condensates based on results of lattice-based Metropolis Monte Carlo (MMC) simulations. By integrating random graph models and simulations of A1-LCD, a type of intrinsically disordered protein, we examine how network topology influences storage modulus, loss modulus, crossover frequency, and relaxation time spectra. Our results reveal a strong correlation between topological features and mechanical response, with the condensate interior exhibiting higher stiffness and faster relaxation than the interface. The relaxation spectra provide …

First-Principles Studies Of Electrical Polarization Effects In Ferroelectrics, Antiferroelectrics And Defects, Louis Alaerts

Dartmouth College Ph.D Dissertations

Over the last few decades, density functional theory (DFT) has emerged as a formidable tool in the field of computational material science. Not only has it become a complementary method approach to experiments by rationalizing the many complex properties of materials but its formidable predictive power can also be used to identify the most promising candidates for specific applications. Point defects in semiconductors have become an important platform for the development of quantum networks due to their ability to act as spin-photon interfaces. Spectral diffusion, the broadening of the optical emission line, can significantly impact the performance of these defect-based …

Low-Field Magnetoresistance In Nanocomposites Of La₀.₇Sr₀.₃Mno₃ And Metal Oxides, Nicholas K. Thiel-Hudson

University Scholar Projects

Pure La_0.7Sr_0.3MnO₃ (LSMO) exhibits colossal magnetoresistance (CMR) with large applied magnetic field over a narrow temperature range (intrinsic behavior), limiting its application to narrow temperature ranges. In contrast, the extrinsic CMR effect originates from inhomogeneities at larger length scales, such as grain boundaries and phase separation, where the structural features act as tunneling barriers, leading to a low-field magnetoresistance (LFMR) response, thereby expanding the application of LSMO into the low-field regime over a broader temperature range. In this work, the magnetotransport behavior of pure LSMO thin film is compared to the composite layered heterostructures of …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

The Evolution Of Nanoparticles In Nanoparticle Doped Optical Fibers, Mary Cahoon

All Dissertations

Optical fiber and fiber laser technologies based on silica glass are critical to many technologies today. One method to improve the optical performance of laser fibers is engineer the local environment around the active elements in the glass. To that end, this Dissertation focused on the fabrication and characterization of fibers made with nanoparticles incorporated into the glass to control the local composition. First, the nanoparticle composition and structure was analyzed as it evolved from from the initially-synthesized form to incorporation into the dense aluminum-silicate glass. The aluminum oxide in the glass was found to be important not only to …

Tailoring The Morphology Of Block Copolymers Via Solvent-Vapor Annealing, Bayleigh Madelin Loving

Honors Theses

Triblock polystyrene-polyisobutylene-polystyrene (PS-PIB-PS) copolymers have widespread applications from thermoplastic elastomers to protective coatings for ballistic applications. The incompatibility between the soft PIB and hard PS phases leads to phase separation and subsequent formation of morphological domains like lamellae and cylinders. The structures are stabilized by physical crosslinks, which can greatly improve the toughness of the triblock systems by preventing chain pullout during tensile deformation. We tailored the morphologies (achieving different morphologies with the same block copolymer) by changing the annealing conditions of the block copolymers. Solvent vapor annealing was used to selectively activate the mobility of a particular block, causing …

Signal Modeling Of High Purity Germanium Detectors, Brooke Parker Thibodeau

Honors Scholar Theses

Pulse shape analysis can be used to analyze radiation incident on a semiconductor diode detector. Finite element analysis (FEA) can be used to simulate high purity germanium detectors with user-specified geometry, impurity concentration, and bias voltage. Subsequent streamline calculation can be used to conduct pulse shape analysis for single and multiple site gamma-ray interactions within the detector volume. Cross sections of the detector can be visualized by contour plots of the electric field, drift velocity magnitude, and collection time, as well as t30 and t90 rise-time values.

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …

Additive Manufacturing Of Thermoplastic Composites, Matik Heskin, K. Chandrashekhara, Richard Billo, Ming-Chuan Leu, Thomas P. Schuman

Miners Solving for Tomorrow Research Conference

No abstract provided.

Polymerization Methods For Vinyl Phosphonate Monomers: Challenges And Perspectives, Sara Mccauley

Miners Solving for Tomorrow Research Conference

No abstract provided.

Preliminary Assessment Of Non-Volatile Particulate Matter And Gaseous Emissions From A Premixed Pre-Vaporized Combustor Designed For Civil Supersonic Transport, Ugochukwu Ewuzie, Godwin Ifeanyi Ogbuehi, Steven Achterberg, Monday Uchenna Okoronkwo, Philip D. Whitefield

Miners Solving for Tomorrow Research Conference

No abstract provided.

Computational Modeling Of Astrophysical Systems, Leleya Iris Stallard

Spring Showcase for Research and Creative Inquiry

This research project focuses on the computational modeling of astrophysical systems using Femap with NX Nastran. The goal was to simulate and analyze the vibrational behavior and structural deformation of celestial bodies under different material compositions and collision conditions. Materials such as iron, granite, titanium, and models for white dwarf stars were used to investigate how varying physical properties affect the systems' dynamic responses. Both isotropic and anisotropic models were created to represent realistic astrophysical materials. Through static and modal analyses, the study explored how internal structure and material stiffness influence the reaction of celestial objects to applied forces and …

Josephson Junctions: Fabrication And Applications For The Axion Dark Matter Experiment, Jonah M. Sachs

Senior Honors Papers / Undergraduate Theses

The observation of axions could revolutionize the world of physics. Through microwave frequency cavity readout of the photons associated with these axions, the ADMX project at WashU utilizes multiple different forms of the Josephson junction (JJ), a superconductive circuit element. The physics behind the JJ are essential to understanding its operation for resonant cavity readout in addition to parametric amplification. Parametric amplifiers produced using JJs can approach the signal-to-noise ratio set by quantum mechanics, and prove essential for the amplification chain used by the ADMX experiment for axionic detection. The limits of these amplifiers are set by the noise tuning …

Mechanochemical Reaction Kinetics—A Theoretical Modeling And Experimental Study, Maria Dolores Masso Ramirez

Mechanical & Aerospace Engineering Theses & Dissertations

Mechanochemical reactions represent a class of chemical processes triggered by mechanical energy, widely recognized for their efficiency, solvent-free nature, and environmental benefits. They are increasingly applied in synthetic chemistry, a branch of science focused on creating new chemical compounds through controlled laboratory reactions. However, the mechanisms underlying mechanical activation remain poorly understood, primarily due to the difficulty in quantifying energy transfer during milling, where solid reactants are ground together using a ball mill. This thesis aims to bridge the gap in understanding the relationship between mechanical parameters and reaction kinetics by developing and validating a theoretical framework based on dimensional …

Effects Of High Temperature Compaction On 3d Printed Carbon Fiber Reinforced Polymer Composites, John D. Barber

Mechanical & Aerospace Engineering Theses & Dissertations

The aim of this dissertation was to study the effects of hot temperature compaction (HTC) upon the polymorphism and the mechanical behavior of an additively manufactured (AM), carbon fiber reinforced polyamide (PA6). Different pressure and temperature levels during HTC were tested to determine the overall effect upon the mechanical behavior and the material crystalline composition. Treated, carbon fiber reinforced PA6 samples were analyzed using differential scanning calorimetry, x-ray diffraction, thermogravimetric analysis, scanning electron microscopy, double cantilever beam testing and three-point bending testing. When considered with respect to as-printed samples, an HTC temperature of 190°C combined with 80 psi pressure resulted …

Recent Advances In Non-Enzymatic Electrochemical Sensors For Theophylline Detection, Gustria Ernis, Yulia M T A Putri, Muhammad Iqbal Syauqi, Prastika Krisma Jiwanti, Yeni Wahyuni Hartati, Takeshi Kondo, Qonita Kurnia Anjani, Jarnuzi Gunlazuardi

Journal of Electrochemistry

Detection of target analytes at low concentrations is significant in various fields, including pharmaceuticals, healthcare, and environmental protection. Theophylline (TP), a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma, bronchitis, and emphysema, has a narrow therapeutic window with a safe plasma concentration ranging from 55.5–111.0 μmol·L^–1 in adults. Accurate monitoring of TP levels is essential because too low or too high can cause serious side effects. In this regard, non-enzymatic electrochemical sensors offer a practical solution with rapidity, portability, and high sensitivity. This article aims to provide a comprehensive review of the recent developments …

Exploring Corona Discharge In Electrostatic Printing For Electronics And In Other Application, Zijian Weng

USF Tampa Graduate Theses and Dissertations

The field of printed electronics (PEs) is expanding rapidly, driven by increasing market demand. According to reports, the global market for PEs is expected to reach $23 billion by 2026, with a compound annual growth rate of 18.3% from 2023 to 2028. This growth necessitates the development of innovative printing technologies that can meet these demands efficiently, delivering high-quality, high-resolution PEs suitable for applications in health, environmental monitoring, sports, aerospace, and more.

Currently, PEs manufacturing relies on two main groups of printing technologies. Contact printing methods offer high-speed production but struggle with precision, while non-contact methods provide high resolution but …

Study On Dopamine Electrochemical Sensing Based On Au@Mos2, Ning An, Ni Su, Xin-Ran Li, Jian-Yu Liu, Qi-Yan Wang

Journal of Electrochemistry

Dopamine (DA) is a vital neurotransmitter, and accurate detection of its concentration is critical for both clinical diagnostics and neuroscience research. Due to its electrochemical activity, DA is commonly detected using electrochemical methods, which are favored for their simplicity, fast response time, and suitability for in vivo analysis. In this work, a highly sensitive DA electrochemical sensor was developed using an Au@MoS₂ composite, created by modifying molybdenum disulfide (MoS₂) nanosheets with gold nanoparticles through HAuCl₄ reduction, and it was aimed at enhancing DA adsorption and improving detection performance. Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), …

Synergy In Materials: Leveraging Phosphosilicate Waste Forms For Electrochemical Salt Waste, Jonathan S. Evarts, Brian J. Riley, Charmayne E. Lonergan, Michaella S. Harris, Jincheng Bai, Eric W. Bohannan, Iheanyichukwu Ajoku, Saehwa Chong, John S. Mccloy

Materials Science and Engineering Faculty Research & Creative Works

Waste forms containing glassy and crystalline phosphate and silicate phases were produced to immobilize salt waste simulants from pyro processing and characterized by using Raman spectroscopy, Mössbauer spectroscopy, X-ray diffraction, scanning electron microscopy, heat capacity, and chemical durability measurements. In this work, a phosphosilicate waste form is presented to leverage the benefits of both borosilicate glasses and iron phosphate glasses. To improve waste loading, prior to immobilization, salt simulants were successfully dechlorinated using ammonium dihydrogen phosphate, mixed with a borosilicate frit (5–30 wt. %) and Fe2O3, and vitrified. Additions of 2.5–15 wt. % borosilicate glass (NBS3) improved normalized release rates …

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

Solid-State Crystallization Of Zeolites And Their Use In Plastic Upcycling Applications, Yixin Liao

Doctoral Dissertations

Plastics have been an irreplaceable component of modern technology as well as everyday life. They have brought much convenience to us with their characteristics of great malleability, durability, and stability. The versatile and low-cost nature of plastics also enables their wide engagement in many modern industries including automobile, medical, communication as well as aerospace. Polyethylene (“PE”), made from polymerization of ethylene, is one of the most widely used plastics in the world. Being cheap, flexible, and long-lasting, they are extensively used in the packaging industry, especially for plastic bags and other sorts of containers. However, the durability of plastics, on …

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Ben Varney, Hua Mei

SPARK Symposium Presentations

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. In place of the PFSA polymers, perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells with better stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. The previous …

Material Classification With Spectropolarimetric Lidar, Alexander J. Watson

Theses and Dissertations

A method for characterizing unknown targets using a hyperspectral polarimetric light detection and ranging (LiDAR) system is presented. Light reflected from manmade objects tends to be more polarized than light reflected from objects in the natural world. As such, polarization measurements can be used in remote sensing applications to differentiate artificial and natural objects. Previous works have attempted to characterize objects through passive polarimetric imagery. Methods developed by Cain and Lemaster and Cunningham facilitate reconstruction of the Stokes Vector from returning light. Martin used multispectral polarimetry to classify targets when the angle of incidence (AOI) is close to 0º. Here, …

Transfer Efficiencies Of Surface-To-Surface Transport Of Micron-Sized Actinide Surrogate Particles, Austin R. Powell

Theses and Dissertations

Particle effluent of varying sizes is released during routine activities within laboratory environments and these particles can come in contact with a wide range of surfaces. Particles of micron size or smaller can be especially pervasive and can transfer between multiple subsequent surfaces, leading to the progressive contamination of a laboratory. Understanding the transport dynamics of micron sized particles will help inform facility personnel of the possibility of contamination by these potentially hazardous materials of interest. In this research, the transfer efficiency of micron sized surrogate actinide particles (Europium-doped Gadolinium Oxysulfide (EGOS)) is measured for multiple materials, between two particle …

Metal Nitrides As Cathode Hosts For Lithium-Sulfur Batteries, Hai-Ji Xiong, Cheng-Wei Zhu, Ding-Rong Deng, Qi-Hui Wu

Journal of Electrochemistry

Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density (2600 Wh·kg^–1) and specific capacity (1675 mAh·g^–1). Currently, various strategies have been proposed to overcome the technical barriers, e.g., “shuttle effect”, capacity decay and volumetric change, which impede the successful commercialization of lithium-sulfur batteries. This paper reviews the applications of metal nitrides as the cathode hosts for high-performance lithium-sulfur batteries, summarizes the design strategies of different host materials, and discusses the relationship between the properties of metal nitrides and their …