Materials Science and Engineering Commons^™

Alternative Cover Permitting And The Ccr Rule, Evan Andrews, Victor Damasceno

World of Coal Ash Proceedings

Federal rules (40 CFR Parts 9, 257 and 261) that regulate coal combustion residuals (CCR) created a significant demand associated with closure of coal ash management and storage facilities using liner systems. Timelines associated with these facility closures combined with substantial project scale and potential for future mining /reuse has driven the need for closure systems that perform beyond the prescriptive soil / geomembrane caps outlined in the federal regulations. As outlined in section 257.102 (d)(3)(i) of the CCR Rule, the standard cover system must include an infiltration layer of at least 18 inches of earthen material and an erosion …

Sustainability And Waste Diversion At Tva Shawnee "Project Phoenix", Bryan Jacob, Shane Harris

World of Coal Ash Proceedings

An engineered turf closure system can serve as an ideal foundation for a solar energy system to be installed atop coal combustion residual (CCR) impoundments. This approach not only enables productive power generation during the post-closure period, it also preserves opportunities for recovery and beneficial use of CCR material in the future. “Project Phoenix” at TVA’s Shawnee Fossil Plant offers an illustrative example. This paper will cover the sustainability benefits of the companion ClosureTurf® and PowerCap® systems installed at that site as well as waste diversion activities undertaken during construction to recycle as much as practical and minimize waste destined …

Demystifying Large Language Models: How Ai Is Transforming Data, Compliance, And Decision-Making In Coal Ash And Environmental Management, Scott Pfeiffer

World of Coal Ash Proceedings

The environmental and coal combustion residuals (CCR) industries generate vast amounts of information—from groundwater monitoring reports and RCRA documentation to closure plans and analytical data. Managing, interpreting, and communicating this information is a growing challenge for utilities, regulators, and consultants alike. Large Language Models (LLMs), such as OpenAI’s GPT architecture, represent a breakthrough in how organizations can interact with their technical data. These models use deep neural networks trained on billions of words to understand, summarize, and generate language with human-like accuracy. When securely adapted for enterprise use, LLMs can automate routine reporting, extract data from technical documents, generate regulatory …

Expert Perspectives On The U.S. Coal Combustion Products Market – Now, Then, And The Future, Mark Rokoff, David Cox, Walter Lemaire, John Ward

World of Coal Ash Proceedings

This panel discussion will explore the continued evolution of the U.S. coal combustion products market, with a focus on the impacts of dynamic regulatory and market forces. Invited expert panelists will share perspectives on developments over the past several years (building on discussions from WOCA 2022 and WOCA 2024), current conditions, and expected future trends—particularly those likely to shape the market between 2026 and 2030. The discussion will address the interrelated markets for engineering, construction, and beneficiation of ash from both operating and inactive plants. Panelists will offer perspectives relevant to the full coal ash industry, from owner/operator organizations to …

Subsurface Delineation Of Coal Combustion Residuals Using Multiple Geophysical Methods, Eric Hageman, Adam Rak, Thomas Jordan, Kate Mckinley

World of Coal Ash Proceedings

Geophysical techniques provide alternative methods of Coal Combustion Residual (CCR) delineation and characterization to supplement more invasive boring programs used for beneficial reuse planning. A demonstration project was designed to characterize the electromagnetic and seismic stratigraphy of CCR material and test the effectiveness of three geophysical techniques: Electrical Resistivity Imaging (ERI), Transient Electromagnetic (TEM) induction, and Multi-channel Analysis of Surface Wave (MASW). The demonstration project was completed at a dry-stack CCR unit containing a variety of CCR ash, gypsum, and thin layers of drainage aggregate (limestone). During a single-day deployment, several geophysical survey tests were conducted in specific areas of …

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Water-Driven Solid Electrolyte Interphase Governs Continuous-Flow Ammonia Electrosynthesis, Peng-Bo Liu, Sheng-Liang Zhai, Ji Huang, Zhong-Shuo Zhang, Jie Zeng, Shao-Feng Li

Journal of Electrochemistry

Flow-cell architectures have emerged as a powerful platform for continuous and stable lithium-mediated nitrogen reduction (Li-NRR), enabling ambient-condition electrochemical ammonia synthesis and offering a promising alternative to Haber-Bosch processes. However, Li-NRR is exceptionally sensitive to trace water, and even minor variations in water content can profoundly alter interfacial chemistry. Here, we systematically investigate how initial water concentration affects Li-NRR performance in a continuous-flow cell. Excess water drives the formation of a thick solid electrolyte interphase (SEI) layer, which may impede nitrogen access to metallic lithium and hinder lithium-ion transport. As a result, the ammonia Faradaic efficiency collapses from ~61% to …

Insertion Of Noble Metal Free Cathodic Catalyst Layer With Fe-N-C Catalyst For Boosted Performance Of Pemfc, Shi Zhou, Muhammad Tariq, Asif Nadeem Tabish, Muhammad Salman, Fan-Di Ning, Muhammad Rayyan Tayyab, Ran-Ran Peng, Meng-Geng Hao, Wen-Mu Li, Xiao-Chun Zhou

Journal of Electrochemistry

Economical Fe-N-C catalysts are considered as promising alternatives to platinum group metal catalysts for proton exchange membrane fuel cells (PEMFCs). Despite exhibiting robust activity on rotating disk electrodes, their performance within membrane electrode assemblies often experiences limitations, such as decreased O₂ diffusion, high H₂O₂ formation, low proton conduction, and a lower electron transfer number. In this study, key factors, including proton transport, electron conduction, and gas diffusion within air-breathing PEMFCs, have been investigated by adjusting cathode catalyst layer (CCL) compositions. From the experimental results, the optimal peak power density was obtained when the loading of Fe-N-C …

Molecular Catalysts For Electrochemical Nitrogen Activation Toward Sustainable Ammonia Synthesis, Jin-Xiu Han, Hao Xue, Xian-Biao Fu

Journal of Electrochemistry

Homogeneous electrocatalytic nitrogen reduction reaction (NRR) provides a powerful framework to interrogate molecular nitrogen-fixation pathways under mild conditions. By tuning the metal center, ligand architecture, and reaction medium, these systems enable capturing key intermediates and delivering mechanistic insight at the molecular-level resolution. Nevertheless, advances remain constrained by highly reduced operating potentials, intense competition from the hydrogen evolution reaction (HER), limited durability in turnover, and inadequate long-term stability.

In this review, we take electron delivery to the molecular active site as the guiding principle for organizing homogeneous electrochemical N₂ activation and transformation. We classify reported systems into direct electron transfer …

A Comparative Study Of Tin Electrorefining In Molten Licl–Kcl–Cacl₂: Experimental Two-Electrode Current Control And Theoretical Three-Electrode Potential Control, Bryant Johnson, George Ankrah, Ander Fuller, Devin Rappleye

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

Molten salt electrorefining is a mature technology for metal recovery, yet conventional current‑controlled, two‑electrode operation provides limited electrochemical selectivity and restricted insight into electrode‑specific behavior. In this work, a simplified model is developed to compare current‑controlled two‑electrode electrorefining data with a potential‑controlled three‑electrode electrorefining simulation using tin in molten LiCl–KCl–CaCl₂ as a surrogate for plutonium processing. The model examines anodic and cathodic limitations under fixed‑potential operation and evaluates implications for selectivity, efficiency, and runtime relative to experimentally demonstrated two‑electrode performance. Results indicate that independent potential control enables operation closer to thermodynamic selectivity limits, with the potential to suppress impurity oxidation …

Growing Large Single And Multi-Crystals From Alum Powder, Owen Paulson, Mayra G. Aguilar, Owen T. Maloney, Kole C. Koehler

Research & Creative Achievement Day

Crystal growth science is used to replicate the growth of crystals that form in nature. Channels of hot fluid with concentrations of minerals created the crystals found as gemstones. At low concentrations, no crystal grows. At high concentrations, a multitude of crystals grow. At the ideal concentration, a single, clear crystal grows. Four solution concentrations were used to create seed crystals. Those Alum seed crystals were attached to a string and suspended in various concentrations of Alum solution to find concentrations that create no crystal, a single crystal, and a multi-crystal.

Growing Alum Crystals, Todd Carroll, Daniela Gutierrez Rubio, Kevin Dang, Samuel J. Whempner

Research & Creative Achievement Day

One of the easiest crystal growth experiments uses Alum powder to dissolve in water. The dissolved material slowly forms with seed crystals to create larger crystals. As the dissolved material is depleted, more is added to continue the crystal growth. Four different concentrations were used for seed crystal growth. Those crystals were attached to a string and hung in a bath of Alum solution. Different strategies were used to grow crystals and in some cases dissolve crystals.

Growing Alum Crystals, Jackson A. Struhar, Alexis M. Freiboth, Ana N. Schneider

Research & Creative Achievement Day

Alum, also known as Potash, is used to can pickles. Alum powder was used to create seed crystals. The seed crystal was hung in a jar submerged in distilled water with alum powder dissolved to attempt to grow an Alum crystal over the Spring semester. Three different concentrations were used to determine changes associated with crystal growth and quality. Numerous strategies were employed throughout the semester as growth methods worked and did not work.

Growing Large Alum Crystals, Wyatt N. Laborde, Will Gunderson, Kyle R. Behrens

Research & Creative Achievement Day

Alum forms a colorless cubic crystal that can grow to the size of a small apple over the span of 2-3 months of growth in a concentrated solution. Many different seed crystal solutions were used to obtain large clear seed crystals. The best seed crystal was attached to a string and suspended in various concentrations of Alum solution to allow for the seed crystal to grow into a large crystal. By monitoring the weight of the crystal, the solution concentration was adjusted for optimum growth.

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Synthesis And Hydrothermal Evaluation Of Poly(Styrene Phosphonate) For Conformance Control In Geothermal Reservoirs, Sara Mccauley

Miners Solving for Tomorrow Research Conference

As atmospheric carbon dioxide levels continue to rise, geothermal energy has emerged as a promising energy alternative to fossil fuels. A barrier to widespread implementation and energy production efficiency is macro-heterogeneity of the rock matrix. Cracks, void spaces, and flow conduits divert fluid flow away from unswept portions of the geothermal reservoir and can cause cooling of the reservoir. Flow heterogeneity has been treated in oil reservoirs by injecting hydrogel particles that travel preferentially to ultra-high permeability zones and selectively block fluid flow in these regions. We are applying polymer hydrogels that withstand hydrothermal conditions of 225 up to 275°C …

Optimization Of Niobium Film For Particle Accelerators And Quantum Applications, Bektur Abdisatarov

Electrical & Computer Engineering Theses & Dissertations

Niobium (Nb) films play a central role in superconducting technologies used in particle accelerators and superconducting quantum circuits. Optimizing the physical properties of Nb films is therefore critical for improving both radiofrequency (RF) performance in superconducting radiofrequency (SRF) cavities and coherence in superconducting qubits. This thesis investigates the relationship between Nb film microstructure, impurity content, and electromagnetic response across these two application domains.

For particle accelerator applications, we studied Nb films deposited using high-power impulse magnetron sputtering (HiPIMS) with DC bias onto a 1.3 GHz elliptical SRF cavity. Nb film cavities exhibit a pronounced medium-field Q-slope, limiting their achievable accelerating …

Ultra-High Vacuum Outgassing Characterization Of Thermally Processed Low-Carbon Steel For Advanced Particle Accelerator And Gravitational Wave Detector Applications, Aiman H. Al-Allaq

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation investigated AISI 1020 low-carbon steel as an alternative vacuum chamber material to conventional stainless steel for ultra-high vacuum (UHV) and extreme-high vacuum (XHV) applications. After a 400 °C/48 h bake, AISI 1020 tube chambers achieved a hydrogen outgassing rate of 2.4 × 10⁻¹⁶ Torr·L·s⁻¹·cm⁻², approximately 2,300 times lower than the prebaked 316L stainless-steel comparator, among the lowest hydrogen outgassing rates ever reported for an uncoated metallic vacuum chamber. Bare and magnetite-coated AISI 1020 chambers were then compared using throughput and rate-of-rise methods. The magnetite coating yielded 5× lower water outgassing at room temperature, but this advantage disappeared after …

Antimicrobial Performance Of Amorphous Vs. Crystalline La1-Xsrxcoo3 Perovskites, S. M. Au Shohag, Fahmida Akhter, Ahmed Touhami, Swati Mohan, Md. Wasikur Rahman, Mohammed Jasim Uddin

Physics & Astronomy Faculty Publications

Perovskite materials, with their unique crystal structure and chemical properties, are emerging as promising antimicrobial agents for potential biomedical applications. In this research, different weight percentages of Sr2 + doped amorphous and crystalline Lanthanum Cobaltite (La1-xSrxCoO3 defined as LSCO) (x = 0, 0.025, 0.05, 0.1, and 0.15) perovskite was synthesized by using a simple combination of sol-gel and molten-salt processes and characterized by X-ray diffraction (XRD), and scanning electron microscopy (SEM) ensures the uniform morphology of the materials. During antimicrobial study using the Kirby Bauer method, amorphous LSCO showed much better activity than crystalline LSCO against Escherichia coli, Vibrio …

Axial Sulfur-Coordination Engineering Boosting Fe–N–C Catalysts For High-Performance Proton Exchange Membrane Fuel Cells, Lin Lin, Xiu-Xuan Hou, Zhe-Chen Fan, Yi-Xuan Yin, Wei-Yi Zhao, Kai Wei, Yu-Die Zhou, Li-Na Hou, Ying Wang, Hao Wan, Jun-Jie Ge

Journal of Electrochemistry

Fe-N-C catalysts have long suffered from kinetically sluggish oxygen reduction reaction (ORR) due to excessive adsorption strength toward oxygen intermediates and low site utilization. Heteroatom doping effectively accelerates ORR reaction kinetics through electronic structure modulation of metal sites for optimal intermediate adsorption, while chemical vapor deposition (CVD) enhances the turnover frequency (TOF) of active sites. Herein, we developed an FeSNC catalyst featuring abundant FeS₁N₄ sites via a dual-precursor CVD strategy. Experimental and theoretical analyses revealed that S incorporation disrupts the symmetric coordination of active sites, which optimizes OH* adsorption energies from 0.212 eV to 1.194 eV. Moreover, …

Deciphering The Role Of Binder Reaction Exothermicity In Thermal Runaway Of Lithium-Ion Cells, Wen Wen, Jing-Hong Zhou, Hao-Tian Lu, Xing-Gui Zhou

Journal of Electrochemistry

Thermal safety associated with lithium-ion cells as power sources remains a critical industry concern. A comprehensive understanding of how internal exothermic side reactions contribute to temperature rise is fundamental for accurately analyzing thermal runaway processes and predicting the thermal safety of lithium-ion cells. While various side-reactions, such as decomposition of solid electrolyte interphase layer, reaction between anode materials and electrolyte, reaction between cathode materials and electrolyte, and electrolyte decomposition, have been identified as heat generation sources in previous studies, the quantification of these reactions remains insufficiently standardized. Particularly, the impact of heat generation from binder decomposition (most commonly polyvinylidene difluoride) …

Entropy Of Metal/Solution Interfaces: Thermodynamic Framework, Theoretical Models, And Roles Of Interfacial Water, Zeng-Ming Zhang, Zi-Xi Liang, Jun Huang

Journal of Electrochemistry

Entropy is a basic thermodynamic property of the electrical double layer (EDL) at metal/solution interfaces, yet, its definition, measurement, and theoretical treatment are dispersed in the literature, and, in some cases, ambiguous. In this paper, we revisit the thermodynamic theory of EDL, from which two variants of entropy, excess entropy and formation entropy, are obtained and compared. In terms of the formation entropy, two calculation routes are validated in the context of a primitive EDL model, namely, the Gouy-Chapman (GC) model. After clarifying the concepts and calculation routes, we investigate interfacial water effects on the EDL entropy, using a refined …

Chemical Design Strategies For Hybrid Metal Halide Semiconductors With Enhanced Stability And Optoelectronic Properties, Ali Azmy

USF Tampa Graduate Theses and Dissertations

Metal halide semiconductors have rejuvenated the attention of the scientific community for the last two decades owing to their photophysical and electronic properties. However, these materials have some limitations that hinder their commercialization and widespread application. One major limitation of these materials is their instability under ambient and operating conditions of moisture, head, light and radiation exposure. Here, we report multiple chemical design strategies to address the stability issues of these materials while simultaneously maintaining their exceptional optoelectronic properties. Such design strategies allowed the acquisition of the first members of the family of porous metal halide semiconductors which exhibit record …

Co-Electrospinning Polyacrylonitrile (Pan) / Polymer Of Intrinsic Microporosity-1 (Pim-1) For Electrochemical-Based Sensor For Pyridine Detection And Absorption, Samar A. Salim

Nanotechnology Research Centre

The electrospinning of the polymer of intrinsic microporosity-1 (PIM-1) poses challenges due to its limited solubility and tendency to form bead-like structures at high concentrations. This work details the synthesis and analysis of electrospun composite fibers made from polyacrylonitrile (PAN) and PIM-1 for electrochemical applications. The data analysis confirmed the successful incorporation of PIM-1 into the PAN matrix. The fiber characteristics were significantly influenced by PIM-1 loading (1–10%), resulting in fiber diameters ranging from 0.8 to 1.7 μm. A 10% concentration of PIM-1 results in the formation of macropores with diameters ranging from 0.5 to 1.7 μm. Optical analysis using …

Microstructural Evolution Of Zirconium Diboride Irradiated With 5–10 Mev Au Ions At Room Temperature And 570 °C, Narrie Loftus, José Olivares, Miguel Crespillo, Esther Enríquez Pérez, Jeremy Watts, Eric W. Bohannan, Gregory Hilmas, William Fahrenholtz, Joseph Graham

Materials Science and Engineering Faculty Research & Creative Works

Zirconium diboride was irradiated with 5 MeV Au^2 + , 7 MeV Au⁴⁺ and 10 MeV Au³⁺ ions at room temperature and 570 °C to doses from 1 to 8 displacements per atom (dpa). Grazing incidence X-ray diffraction (GIXRD) analysis revealed no secondary phase formation. Rietveld analysis of the GIXRD data indicated an accumulation of microstrain at low dpa and room temperature. Dislocations observed in transmission electron microscopy (TEM) cross-sections are likely the main contributor to the microstrain. High dpa and high-temperature samples exhibit lower lattice distortion than lower dpa samples, suggesting the presence of enhanced defect …

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO²⁺/VO₂⁺ and V²⁺/V³⁺ couples. One of the major challenges for VRFBs is the slow charge transfer in VO²⁺/VO₂⁺ and V²⁺/V³⁺ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …