Materials Science and Engineering Commons^™

Single-Layer Oxygen Deficiency Δ-Mno2 For Electrochemical Co2 Reduction, Yue-Feng Zhang, Jian-Jun Liu, Zeng-Xi Wei, Xin-Xin Tian, Jian-Min Ma

Journal of Electrochemistry

Manganese dioxide (MnO₂) has been widely used in catalysis. In addition, since the defect engineering can change the electronic properties of the catalyst, here we have systematically studied electrocatalytic carbon dioxide reduction reaction (CO₂RR) on δ-MnO₂ with and without oxygen deficiency, denoted as Ov-MnO₂ and MnO₂, respectively. We calculate the electronic properties and the intermediate of free energy for MnO₂ and Ov-MnO₂ with the help of spin-polarized density functional theory. By analyzing this result, we can find that the introduction of defects change the δ-MnO₂ from semiconducting properties to …

Statuses, Challenges And Strategies In The Development Of Low-Temperature Carbon Dioxide Electroreduction Technology, Xu-Rui Zhang, Xiao-Lin Shao, Jin Yi, Yu-Yu Liu, Jiu-Jun Zhang

Journal of Electrochemistry

Low-temperature carbon dioxide (CO₂) electrochemical reduction technology is a hotspot for research and development in recent years as a way to reduce the negative impact of CO₂ on the environment and to generate energy storage through converting electricity to low-carbon fuels. Although basic research on catalyst activity, product selectivity, and reaction mechanism has been widely reported, the design and practicality of catalytic stability and corresponding electrochemical reactor systems have not been given sufficient attention and systematic development.  In this paper, two important factors affecting the development of CO₂ electrochemical reduction technology in low temperature aqueous solution …

Electrocatalytic Reduction Of Carbon Dioxide To Carbon Monoxide Using Cobalt Nitride, Chen Ma, Peng-Fei Hou, Peng Kang

Journal of Electrochemistry

Electrocatalytic reduction of carbon dioxide (CO₂) is a promising method to alleviate global warming issues, although it still faces many challenges. Herein, we report cobalt nitride for electrocatalytic reduction of CO₂ to carbon monoxide (CO) in an aqueous electrolyte. A comparison of catalysts with different preparation temperatures and atmospheres suggests that nitrogen doping is critical to improve catalytic activity. For the most active catalyst of 700-Co_5.47N/C, the CO current density reached 9.78 mA·cm^-2 at potential of -0.7 V vs. RHE. In addition, the CO/H₂ ratio could be adjusted from 1:3 to 3:2 by …

Electrocatalytic Nanomaterials For Reduction Of Hydrogen Peroxide As Potential Radioprotectors, Rui-Hong Jia, Jin-Xuan Zhang, Xiao-Dong Zhang, Mei-Xian Li

Journal of Electrochemistry

Nanomaterials have shown many potential application prospects in the biomedical field, such as medical imaging, drug delivery and biosensing due to their unique physical and chemical properties. In this review we focus on nanomaterials that have shown not only abilities of radiation protection, but also good electrocatalytic activities toward reduction reactions of hydrogen peroxide and oxygen. We discuss the abilities of radiation protection of these nanomaterials that are ascribed to their enzyme-like activities because their catalytic properties provide an effective pathway for scavenging free radicals in vivo via rapid reactions with reactive oxygen species. We also provide insights into electrocatalytic …

Correlated Optical Imaging And Electrochemical Recording For Studying Single Nanoparticle Collisions, Lin-Lin Sun, Wei Wang, Hong-Yuan Chen

Journal of Electrochemistry

With the development of nano-fabrications in recent years, a novel strategy based on random collisions of single electroactive nanoparticles (NPs) onto an inert ultramicroelectrode (UME) has been emerged in the field of nanoelectrochemistry, and named as single nanoparticles collisions (SNCs). The technique uses a chronoamperometric method to detect transient current generated by random collisions of single NPs onto an UME. By analyzing the current signal, one could study the properties of single NPs. Although this technique can detect electrochemical or electrocatalytic currents of a single NP, the traditional SNCs technology lacks necessary spatial resolution to identify and characterize a specific …

Defect Chemistry And Ion Intercalation During The Growth And Solid-State Transformation Of Metal Halide Nanocrystals, Bo Yin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Abstract of the Dissertation

Defect Chemistry and Ion Intercalation During the Growth and Solid-State Transformation of Metal Halide Nanocrystals

Semiconductor metal halides as light-sensitive materials have applications in multiple areas, such as photographic film, antibacterial agents and photocatalysts. One focus of this dissertation is to achieve novel morphologies of ternary silver bromoiodide (AgBr1-xIx, 0

For the silver halide system, we demonstrate that the anion composition of AgBr1-xIx nanocrystals determines their shape through the introduction of twin defects as the nanocrystals are made more iodide-rich. AgBr1-xIx nanocrystals grow as single-phase, solid solutions with the rock salt crystal structure for anions compositions …

Engineering Multifunctional And Morphologically Diverse Polymer Brush Surfaces, Cassandra M. Reese

Dissertations

The combination of surface-initiated polymerization (SIP) and post-polymerization (PPM) serves as a powerful approach to fabricate complex, multifunctional polymer films, which can be precisely tuned for desired surface engineering applications. Careful manipulation of PPM parameters such as reaction conditions, the tethered brush parameters, and the physical properties of the unbound post-modifier greatly influence the depth of penetration of the post-modifier and the polymer brush compositional heterogeneity. This dissertation focuses on engineering polymer brush surfaces with multifunctional chemistries and tunable morphologies by investigating the PPM parameters that dictate the distribution of post-modifiers on grafted polymer brush surfaces.

The first chapter of …

Recent Progress Of Electrochemiluminescence Sensors Based On Electrically Heated Electrode, Hui-Fang Zhang, Yi-Ting Chen, Fang Luo, Zhen-Yu Lin, Guo-Nan Chen

Journal of Electrochemistry

Electrochemiluminescence (ECL) has broad application in the fields of environmental monitoring and biological analysis due to its intrinsic advantages such as excellent versatility, good detection sensitivity, and high specificity. The intensity of ECL can be influenced by temperature variation in the ECL quantum efficiency and the rate of electrochemical reaction. However, traditional temperature control is commonly realized through bulk solutions heating, which is complicated and unfavorable for detection when the volatile and thermally unstable materials existed. In order to address these problems, electrically heated electrodes are used to adjust the temperature desired. The major character of this technique lies in …

Graphene-Like Secondary-Laser-Etched Polyimide Film Decorated With CuXO Nanocomposites: A Novel Electrode Substrate For Non-Enzymatic Glucose Sensors, Wan-Lin Dai, Zhi-Wei Lu, Jian-Shan Ye

Journal of Electrochemistry

In this work, a novel electrode substrate with graphene-like surface and Cu_xO nanocomposites derived from secondary-laser-etched polyimide (SLEPI) film was synthesized and applied in non-enzymatic glucose detection for the first time. Characterizations indicate that the as-prepared SLEPI/Cu_xO film electrode (SLEPI/Cu_xO-FE) possessed huge surface area, plentiful active sites and excellent electrocatalytic performance. The obtained sensor exhibited the high sensitivity and selectivity for glucose determination with a linear range of 0.05 mmol·L^-1 to 3 mmol·L^-1 and a detection limit of 1.72 μmol·L^-1 (S/N=3), which provides a simple, flexible and low-cost electrochemical sensor for …

Preparation And Capacitive Property Of Two-Dimensional Multilayer Ti3C2TX-Mxene/Ppy-Nw Composite Material, Lu Chen, Xuan Jian, Min He, Mi-Mi Zhang, Xiao-Die Chen, Lou-Jun Gao, Zhen-Hai Liang

Journal of Electrochemistry

In this paper, the two-dimensional multilayered Ti₃C₂T_x-MXene was obtained by hydrofluoric acid etching method on the bulk phase material MAX(Ti₃AlC₂) substrate. The two-dimensional multilayered Ti₃C₂T_x-MXene/PPy-NW composite electrode materials were successfully prepared by combining the one-dimensional polypyrrole nanowires (PPy-NW) with two-dimensional multilayered Ti₃C₂T_x-MXene. The morphologies and compositions of the synthetic materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Electrochemical tests showed that Ti₃C_{2 …}

In Situ/Operando Visualization Of Electrode Processes In Lithium-Sulfur Batteries: A Review, Shuang-Yan Lang, Xin-Cheng Hu, Rui Wen, Li-Jun Wan

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries have been regarded as one of the most promising candidates for the next-generation energy storage devices. Fundamental understanding of the structure and evolution processes at electrode-electrolyte interfaces is essential to the further development. In this review, we summarize recent advances in the interfacial observations by means of various in situ/operando visualization techniques, including scanning probe microscopy (SPM), electron microscopy (EM), X-ray microscopy (XRM) and optical microscopy (OM). The real-time investigation provides important evidence for the morphology and component changes including S/Li₂S transformation, polysulfide dissolution on cathodes and Li/solid electrolyte interphase (SEI) evolution on anodes, which …

Sensitive Photoelectrochemical Assay Of Nucleic Acids Based On Catalytic Hairpin Assembly And Ru(Nh3)63+, Ya-Min Fu, Xiao-Xia Yan, Xiao-Hua Zhang, Jin-Hua Chen

Journal of Electrochemistry

A simple “signal-on” photoelectrochemical (PEC) sensing platform for sensitive assay of nucleic acids was developed by coupling catalytic hairpin assembly (CHA) signal amplification strategy with Ru(NH₃)₆³⁺. Herein, cadmium sulfide (CdS) was deposited on the TiO₂/indium tin oxide (ITO) electrode by a method of successive ionic layer adsorption and reaction (SILAR), serving as one kind of photoelectric material to broaden absorption range of TiO₂ and to improve the photoelectric conversion efficiency. Thereafter, the capture DNA (C-DNA) was immobilized on the CdS/TiO₂/ITO electrode. Simultaneously, Au-hairpin DNA probe 1 (Au-HP1) and hairpin DNA …

A Facile Strategy For Two-Step Fabrication Of Gold Nanoelectrode For In Vivo Dopamine Detection, Li-Hao Guan, Chao Wang, Wang Zhang, Yu-Lu Cai, Kai Li, Yu-Qing Lin

Journal of Electrochemistry

In vivo monitoring neurochemicals with microelectrode is invasive and the damage to brain tissue may inevitably cause disturbance signals physiologically to the measurement. It is of great importance to reduce the electrode size and to decrease the damage. This study demonstrates a novel nanoelectrode preparation methodology for in vivo monitoring dopamine (DA) fluctuation in the living brain of rats with high dependability. The fabrication process of the gold nanoelectrode involving a few minutes consists of only two steps: 1) growing gold nanoseeds on surface of tip of glassy capillary by ion sputtering; 2) wet depositing a continuous conductive gold film …

Preparation And Electrocatalytic Oxygen Reduction Performance Of Self-Doped Sludge-Derived Carbon, Ya-Li Ye, Wei-Ming Feng, Ge Li, Zhen-Chao Lei, Chun-Hua Feng

Journal of Electrochemistry

The development of low-cost, high-performance cathode catalysts is critical for practical application of fuel cells. Here, the N, P-doped porous graphene-like carbon with outstanding oxygen reduction reaction (ORR) performance was synthesized by pyrolysis of surplus sludge, which functioned as a self-doped, self-activated, and self-templated precursor by acclimation with continuous feedings of phenol. The results show that the amounts of microorganisms were enriched after acclimation, with increasing contents of N, P, Fe, as well as C atoms. The increasing pyrolysis temperature resulted in the formation of an ordered graphitic structure, however, the excessively high temperature induced the drop in the amounts …

Current Status And Prospect Of Battery Configuration In Li-S System, Jia-Hang Chen, Hui-Jun Yang, Cheng Guo, Jiu-Lin Wang

Journal of Electrochemistry

Commercial lithium-ion batteries (LIBs) are incapable of satisfying the increasing demand for emerging electronic devices due to their limited energy density. Among the next-generation batteries, lithium-sulfur (Li-S) batteries are becoming a promising energy-storage system due to their high theoretical energy density and natural abundance of sulfur. However, the shuttle of soluble polysulfide intermediates between two electrodes, as well as the problem on Li metal anode,lower the utilization of active material and lead to the loss of specific capacity and rapid capacity fading. All the above challenges limit the further application of Li-S batteries. Recently, various novel battery configurations have been …

A Comparative Study Of Pre-Lithiated Hard Carbon And Soft Carbon As Anodes For Lithium-Ion Capacitors, Zhao Li, Xian-Zhong Sun, Wen-Jie Liu, Xiong Zhang, Kai Wang, Yan-Wei Ma

Journal of Electrochemistry

Lithium-ion capacitor (LIC) has emerged to be one of the most promising electrochemical energy storage devices. Presently, activated carbon (AC) is the mostly used cathode material for LIC. Nevertheless, various carbonaceous materials can be used as anode materials, such as hard carbon (HC) and soft carbon (SC). Therefore, HC and SC with different structural and electrochemical characteristics have been investigated as the anode materials of LICs in this work. Compared with the HC electrode, the SC electrode showed higher electronic conductivity and reversible capacity. The rate capabilities of the two carbonaceous materials as a function of coating thickness have been …

Cvd Preparation And Application Of 3d Graphene In Electrochemical Energy Storage, Yong-Kang Xia, Ming-Yuan Gu, Hong-Guan Yang, Xin-Zhi Yu, Bing-An Lu

Journal of Electrochemistry

Three-dimensional (3D) graphene combinations with the excellent intrinsic properties of graphene and the 3D micro/nano porous structures provide a graphene foam with high specific surface area, excellent mechanical strength and fast electron and mass transports. The 3D graphene foam and its composite nanomaterials are widely used in the fields of nano-electronics, energy storage, chemical and biological sensing. The 3D graphene foam prepared by chemical vapor deposition (CVD) method is of high purity and crystallinity.  In this review, a brief overview in the CVD preparations of 3D graphene and properties of CVD prepared 3D graphene based nanomaterials in electrochemical energy storage …

Applications Of Advanced Imaging Technologies For Critical Issues Of All-Solid-State Lithium Battery Studies, Yi-Bo Zhao, Hui-Hui Liu, Song-Liang Chen, Shou-Hang Bo

Journal of Electrochemistry

All-solid-state lithium batteries have attracted much attention for their high energy density and good safety. To increase their efficiency and prolong their service life, it is necessary to achieve high ion conductivity at the electrode/electrolyte interface and in the electrolyte, as well as to eliminate dendrites growth in the battery. Based on the critical requirements outlined above, this paper discusses the applications of advanced imaging technologies in relevant studies. Recent progresses in investigations of all-solid-state lithium batteries by imaging techniques including electron microscopy, scanning probe microscopy, X-ray tomography, magnetic resonance imaging and optical microscopy are summarized.

Ni/Mn3O4/Nimn2O4 Double-Shelled Hollow Spheres Embedded Into Reduced Graphene Oxide As Advanced Anodes For Sodium-Ion Batteries, Chong Yan, Hua-Ri Kou, Bo Yan, Xiao-Jing Liu, De-Jun Li, Xi-Fei Li

Journal of Electrochemistry

Delicately building the unique nanocomposite with the combination of hollow structure and reduced graphene oxide (rGO) is highly desirable and still remains a great challenge in the field of energy conversion and storage. In this work, Ni/Mn₃O₄/NiMn₂O₄ double-shelled hollow spheres coated by rGO (denoted as R-NMN) have been successfully synthetized via one-step rapid solvothermal treatment followed by subsequent annealing for the first time. Served as anodes for sodium ion batteries (SIBs), the R-NMN composite containing 25wt% rGO exhibits a high discharge capacity of 187.8 mAh·g^-1 after 100 cycles at 50 mA·g^{-1 …}

Preface On Special Issue Of Next-Generation Secondary Batteries, Zhen Zhou, Quan-Feng Dong

Journal of Electrochemistry

No abstract provided.

Recent Progress On Tio2-Based Anode Materials For Sodium-Ion Batteries, Si-Tian Lian, Jian-Shuai Lv, Qiang Yu, Guang-Wu Hu, Zhuo Chen, Liang Zhou, Li-Qiang Mai

Journal of Electrochemistry

Titanium dioxide (TiO₂) represents a stable, low-cost, and nontoxic anode material for sodium-ion batteries (SIBs). However, the low electrical conductivity limits its electrochemical activity (specific capacity) and rate capability, hindering its widespread applications. In this article, we show that different crystal forms of TiO₂ have different pore structures, resulting in the distinct sodium storage capacities. Accordingly, the article introduces how TiO₂ microstructures influence sodium storage. The nanoparticle structure can improve the rate performance of the material due to its short ion diffusion distance, and the internal cavity of the hollow structure is beneficial to cycle stability. …

Recent Progress In Vanadium-Based Electrode Materials, Meng-Lei Sun, Da-Qi Zhang, Jin-Kui Feng, Jiang-Feng Ni

Journal of Electrochemistry

It is an important solution to solve energy storage problems by developing inexpensive and safe lithium-ion and sodium-ion batteries with superior performance. Vanadium-based electrode materials are promising electrode materials because of diversified chemical valences, open structures and high theoretical capacities. In the past few years, vanadium-based electrode materials such as oxides, sulfides, and phosphates have achieved a considerable development in the battery field, It is,  therefore, necessary to summarize their recent research progress. In this review, we particularly highlight the key challenges that are facing in the application of vanadium materials, such as low ion diffusion coefficient and poor structural …

Recent Progress In Key Materials For Room-Temperature Sodium-Ion Batteries, Fan-Fan Wang, Xiao-Bin Liu, Long Chen, Cheng-Cheng Chen, Yong-Chang Liu, Li-Zhen Fan

Journal of Electrochemistry

Sodium-ion batteries (SIBs) have attracted tremendous attention in large-scale energy storage applications due to their resource advantages. However, Na+ is larger and heavier than Li+, which will limit its reversible reaction with the electrode materials and result in poor electrochemical performance. Thus, developing stable and high-efficiency electrode materials is the key to promoting the practical application of SIBs. Furthermore, the optimization of electrolyte is essential for the construction of high-safety and long-lifespan SIBs. In this review, we mainly summarize the recent advancements of electrode materials and electrolytes for room-temperature SIBs and discuss their challenges and possible resolution strategies. We hope …

Recent Developments In Surface/Interface Modulation And Structure-Performance Relationship Of Cathode Catalysts For Li-Air Batteries, Rui Gao, Jun-Kai Wang, Zhong-Bo Hu, Xiang-Feng Liu

Journal of Electrochemistry

Lithium-air battery has been considered to be one of the most promising secondary battery systems because of its high energy density. However, the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) on the cathode, and the high overpotential, poor cycle stability and low rate capacity have severely blocked the development and application of Li-air battery. One of the effective strategies to alleviate these issues is to develop cathode catalysts for Li-air batteries. The design and development of bifunctional cathode catalysts with high activity and efficiency on both ORR and OER is highly desired for Li-air …

Synthesis Of Flower-Like Vanadium Disulfide For Lithium Storage Application, Pan Li, Jian Liu, Wei-Yi Sun, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

In order to improve the electrochemical properties of vanadium disulfide (VS₂) as an electrode material in Li-ion battery, the flower-like VS₂ was prepared by a one-step hydrothermal method with the addition of polyethylene glycol 400. The phase and morphology of the product were characterized by using X-ray diffraction and field emission scanning electron microscopy. During the growth process, it was observed that the flower-like VS₂ was interspersed with several hexagonal vanadium disulfide nanosheets, which had a high specific surface area and excellent structural stability. The flower-like VS₂ was used for the cathode material test in …

Tools For Understanding Static Structure Factors And Their Application To Simulations Of Liquids, Travis Mackoy

Graduate Research Theses & Dissertations

Molecular dynamics (MD) simulations can be used to compute static structure factors (��(��)) and provide an interpretation of the underlying periodic atomic ordering. MD simulations complement experimentally measured ��(��) by allowing qualitative assignment of peaks to various ordering, such as cation-anion ordering in ionic liquids, via decomposition of ��(��) into partial ��(��). Here we present a method for classifying interatomic distances that allows for quantitative peak assignment and visualization of atoms that contribute most to each peak in calculated ��(��) for soft materials. The method is illustrated by investigating ��(��) for the ionic liquid 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide (C4C1pyrrTFSI), which shows two …

Synthesis Of Cadmium Arsenide Semiconductor Nanoparticles, Superatomic Silver Clusters, And Silver Coordination Polymers, Sarthak Jashubhai Patel

Legacy Theses & Dissertations (2009 - 2024)

Nanomaterials have chemical, electronic, optical, and other properties distinct from their bulk counterparts. However, the atom-precise synthesis of these materials remains a challenge, leaving open many scientific questions regarding the size regime between nanoparticulate (quantum confined) and bulk character. In this work, efforts toward the synthesis of nanoparticulate and atom-precise metal and semimetal materials are described. The synthesis of II-V semiconductor Cd3As2 having a near-zero bandgap is discussed. Analysis by UV-Vis absorption spectroscopy and powder X-ray diffraction indicate the formation of material with unexpected crystallinity and absorption properties The interaction between the molecular source of As and the solvent was …

Stabilization Strategies Of Pt Catalysts Forproton Exchange Membrane Fuel Cells, Da-Ping He, Shi-Chun Mu

Journal of Electrochemistry

The low service lifetime of proton exchange membrane fuel cells (PEMFCs) is the main bottleneck for their commercial applications. One of the main factors is that the expensive metal Pt catalyst is easy to degradation under the harsh working environment of PEMFC (such as variable voltage, strong acidity, gas-liquid two-phase flow), which leads to the inevitable decay of the catalytic performance, thus, seriously restricting the lifetime of PEMFC. Therefore, the electrochemical stability of Pt-based electrocatalysts has become an important and hot topic to improve the PEMFC lifetime. In this paper, we review the recent development in enhancing the stability of …

The Pilot Application Of Electrochemical Impedance Spectroscopy On Dynamic Proton Exchange Membrane Fuel Cell, Jian-Wei Guo, Jian-Long Wang

Journal of Electrochemistry

By analyzing Electrochemical Impedance Spectroscopy (EIS) in applications of dynamic proton exchange membrane fuel cell (PEMFC), bottlenecks which restrict EIS tool development have been pointed out in this paper. Though the high-frequency resistance in EIS is largely accepted as cell inner-resistance, this can only be applied for cell with low current. The low-frequency resistance is difficult to be realized due to its relation with mass transfer. Furthermore, the improved Randles equivalent circuits are built up preliminarily, thus, penetrating into studies for mass transfer reaction, cell operation/degeneration, and high temperature fuel cell. Inspiringly, EIS is becoming an analyzing tool for stack …

Research Progress In Hydrogen Evolution Low Noble/Non-Precious Metal Catalysts Of Water Electrolysis, Yang Li, Zhao-Yan Luo, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

Hydrogen energy technology with hydrogen as an energy carrier is gaining more and more attention due to its cleanliness and high energy density. Hydrogen fuel cell vehicles have been listed as one of the ultimate energy technologies in the 21st century. Among them, sustainable hydrogen production technology is a necessary prerequisite for the future development of hydrogen energy economy. Electrolyzed water technology driven by renewable resources represents an important way to support the sustainable development of hydrogen energy economy. The development and utilization of high activity, low cost hydrogen evolution catalysts is a key factor in improving the efficiency and …