Materials Science and Engineering Commons^™

Josephson Junctions: Fabrication And Applications For The Axion Dark Matter Experiment, Jonah M. Sachs

Senior Honors Papers / Undergraduate Theses

The observation of axions could revolutionize the world of physics. Through microwave frequency cavity readout of the photons associated with these axions, the ADMX project at WashU utilizes multiple different forms of the Josephson junction (JJ), a superconductive circuit element. The physics behind the JJ are essential to understanding its operation for resonant cavity readout in addition to parametric amplification. Parametric amplifiers produced using JJs can approach the signal-to-noise ratio set by quantum mechanics, and prove essential for the amplification chain used by the ADMX experiment for axionic detection. The limits of these amplifiers are set by the noise tuning …

Recent Advances In Non-Enzymatic Electrochemical Sensors For Theophylline Detection, Gustria Ernis, Yulia M T A Putri, Muhammad Iqbal Syauqi, Prastika Krisma Jiwanti, Yeni Wahyuni Hartati, Takeshi Kondo, Qonita Kurnia Anjani, Jarnuzi Gunlazuardi

Journal of Electrochemistry

Detection of target analytes at low concentrations is significant in various fields, including pharmaceuticals, healthcare, and environmental protection. Theophylline (TP), a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma, bronchitis, and emphysema, has a narrow therapeutic window with a safe plasma concentration ranging from 55.5–111.0 μmol·L^–1 in adults. Accurate monitoring of TP levels is essential because too low or too high can cause serious side effects. In this regard, non-enzymatic electrochemical sensors offer a practical solution with rapidity, portability, and high sensitivity. This article aims to provide a comprehensive review of the recent developments …

Study On Dopamine Electrochemical Sensing Based On Au@Mos2, Ning An, Ni Su, Xin-Ran Li, Jian-Yu Liu, Qi-Yan Wang

Journal of Electrochemistry

Dopamine (DA) is a vital neurotransmitter, and accurate detection of its concentration is critical for both clinical diagnostics and neuroscience research. Due to its electrochemical activity, DA is commonly detected using electrochemical methods, which are favored for their simplicity, fast response time, and suitability for in vivo analysis. In this work, a highly sensitive DA electrochemical sensor was developed using an Au@MoS₂ composite, created by modifying molybdenum disulfide (MoS₂) nanosheets with gold nanoparticles through HAuCl₄ reduction, and it was aimed at enhancing DA adsorption and improving detection performance. Scanning Electron Microscopy (SEM), transmission electron microscopy (TEM), …

Investigating Spatial Mapping Of Lipid And Protein Alterations Within Cells And Tissues Using Raman Microspectroscopy, Elnaz Sheikh

LSU Doctoral Dissertations

The progression of various diseases is associated with alterations in the microenvironment of cells, consisting of a variety of metabolites like lipids and proteins. It is well known that lipids and proteins are potential biomarkers for indicating alterations within the cell microenvironment induced by disease, and various methods are frequently used for their examination. To understand the chemical composition and spatial distribution of constituents in tissues and cells, confocal Raman spectroscopy and microscopy, as non-destructive tools, have shown potential for monitoring abnormalities at the cellular level with high resolution and can facilitate detection through targeting multiple biomarkers. The application of …

Synthesis, Characterization And Electrical Properties Evaluation Of Zirconium Dioxide Capacitors, Thomas P. Chandy

USF Tampa Graduate Theses and Dissertations

This thesis focuses on the fabrication and comprehensive characterization of thin-film capacitors utilizing zirconium dioxide (ZrO2) as the dielectric material, placed between aluminum electrodes. The research primarily aims to examine the impact of varying ZrO2 film thickness and the effects of post-deposition annealing on the structural, morphological, and electrical properties of the capacitors. A controlled sputtering deposition technique was employed to ensure uniform film growth, maintaining consistency in thickness and material quality across all samples.

A comprehensive set of characterization techniques was employed to analyze the capacitors. Scanning electron microscope (SEM) was used to assess surface roughness, revealing fewer defects …

Synthesis, Characterization And Delamination Studies Of Metallic Thin Films Prepared Using Sputtering And Ebeam Evaporation Methods, Anoop Joseph

USF Tampa Graduate Theses and Dissertations

In many mechanical applications, including the manufacturing, automotive, and cutting tool sectors, metallic thin film coatings are crucial due to their tribological and protective properties. This research focuses on the development of metallic thin films of Aluminum (Al), Chromium (Cr) and Titanium (Ti) using deposition techniques like Sputtering and Electron Beam Evaporation. Metallic thin films were fabricated, with variations in thickness for each material, allowing for an in-depth study of the effects of Sputtering and Ebeam Evaporation deposition method on film characteristics. The thickness of these metallic thin films were evaluated using High-Resolution Scanning Electron Microscopy (HRSEM) and Profilometer while …

Analytical Electrochemistry Of Nickel, Platinum, And Platinum-Nickel Electrodepositions, Kyle James Troche

Nanoscience and Microsystems ETDs

Nickel and platinum electrodeposits have numerous applications in corrosion and wear-resistant coatings, electronic connectors, heat resistance, metal finishings, and catalysts. The addition of additives can vastly change the morphology of the deposition. Electrokinetic parameters can be calculated by conducting rotating disk electrode (RDE) experiments along with Koutecky-Levich analysis. Significant challenges need to be addressed to deposit uniform films of Pt-Ni alloys from a single co-deposition bath. The main challenge is platinum’s catalytic property to reduce the overpotential for the hydrogen generation reaction. An Investigation into methanol and carbon monoxide’s hydrogen generation reaction suppression was conducted. Electrodeposition of nickel, platinum, and …

Metal Nitrides As Cathode Hosts For Lithium-Sulfur Batteries, Hai-Ji Xiong, Cheng-Wei Zhu, Ding-Rong Deng, Qi-Hui Wu

Journal of Electrochemistry

Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density (2600 Wh·kg^–1) and specific capacity (1675 mAh·g^–1). Currently, various strategies have been proposed to overcome the technical barriers, e.g., “shuttle effect”, capacity decay and volumetric change, which impede the successful commercialization of lithium-sulfur batteries. This paper reviews the applications of metal nitrides as the cathode hosts for high-performance lithium-sulfur batteries, summarizes the design strategies of different host materials, and discusses the relationship between the properties of metal nitrides and their …

Sno2 Particles Embedded Into Carbon Coated Mesoporous SioX Rod As High Volumetric Capacity Anode For Lithium-Ion Batteries, Jia-Lin Guo, Ni-Ni Li, Peng Zheng

Journal of Electrochemistry

Due to the high capacity and moderate volume expansion of silicon protoxide SiO_x (160%) compared with that of Si (300%), reducing silicon dioxide SiO₂ into SiO_x while maintaining its special nano-morphology makes it attractive as an anode of Li-ion batteries. Herein, through a one-pot facile high-temperature annealing route, using SBA15 as the silicon source, and embedding tin dioxide SnO₂ particles into carbon coated SiO_x, the mesoporous SiO_x-SnO₂@C rod composite was prepared and tested as the anode material. The results revealed that the SnO₂ particles were distributed uniformly in the …

Enhancing Cycle Life Of Graphite ‖ Lifepo4 Batteries Via Copper Substituted Li2Ni1-XCuXO2 Cathode Prelithiation Additive, Jian-Ming Zheng, Jing-Wen Zhang, Tian-Peng Jiao

Journal of Electrochemistry

Lithium nickel oxide (Li₂NiO₂), as a sacrificial cathode prelithiation additive, has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries (LIBs). However, high-cost Li₂NiO₂ suffers from inferior delithiation kinetics during the first cycle. Herein, we investigate the effects of the cost-effective Cu substitution of Li₂Ni_1-xCu_xO₂ (x = 0, 0.2, 0.3, 0.5, 0.7) synthesized by high-temperature solid-phase method on the structure, morphology, electrochemical performance of graphite‖LiFePO₄ battery. The X-ray Diffraction (XRD) refinement result demonstrates that Cu substitution strategy is favorable …

Nanostructured Graphitic Carbon Nitride For Photocatalytic And Electrochemical Applications, Muhammad Abdul Qadeer, Iqra Fareed, Asif Hussaine, Muhammad Asim Farid, Sadia Nazir, Faheem K. Butt, Ji-Jun Zou, Muhammad Tahir, Shang-Feng Du

Journal of Electrochemistry

Graphitic carbon nitride (g-C₃N₄) exhibits great mechanical as well as thermal characteristics, making it a valuable material for use in photoelectric conversion devices, an accelerator for synthesis of organic compounds, an electrolyte for fuel cell applications or power sources, and a hydrogen storage substance and a fluorescence detector. It is fabricated using different methods, and there is a variety of morphologies and nanostructures such as zero to three dimensions that have been designed for different purposes. There are many reports about g-C₃N₄ in recent years, but a comprehensive review which covers nanostructure dimensions …

A Cnt Intercalated Co Porphyrin-Based Metal Organic Framework Catalyst For Oxygen Reduction Reaction, Pei-Pei He, Jin-Hua Shi, Xiao-Yu Li, Ming-Jie Liu, Zhou Fang, Jing He, Zhong-Jian Li, Xin-Sheng Peng, Qing-Gang He

Journal of Electrochemistry

The poor electronic conductivity of metal-organic framework (MOF) materials hinders their direct application in the field of electrocatalysis in fuel cells. Herein, we proposed a strategy of embedding carbon nanotubes (CNTs) during the growth process of MOF crystals, synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure. Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin. Simultaneously, the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency. X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT …

New Insights Into Controlling The Functional Properties Of Tin Oxide-Based Materials, Alexandra Kuriganova, Nina Smirnova

Journal of Electrochemistry

Development of methodologies for fabrications of nanostructured materials that provide control over their microstructural features and compositions represents a fundamental step in the advancement of technologies for productions of materials with well-defined functional properties. Pulse electrolysis, a top-down electrochemical approach, has been demonstrated to be a viable method for producing nanostructured materials with a particular efficacy in the synthesis of tin oxides. This method allows for significant control over the composition and shape of the resulting tin oxides particles by modifying the anionic composition of the aqueous electrolyte, obviating the need for additional capping agents in the synthesis process and …

Nanomaterial-Enabled Enhancements In Thylakoid-Based Biofuel Cells, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

Thylakoid-based photosynthetic biofuel cells (TBFCs) harness the inherent light-driven electron transfer pathways of photosynthesis to enable sustainable solar-to-electrical energy conversion. While TBFCs offer a unique route toward biohybrid energy systems, their practical deployment is hindered by sluggish electron transfer kinetics, unstable redox mediators, and inefficient interfacing between biological and electrode components. This review critically examines recent advances in TBFCs, with a focus on three key surface engineering strategies: (i) incorporation of nanostructured materials to enhance electrode conductivity and surface area; (ii) application of redox mediators to facilitate charge transfer between photosynthetic proteins and electrodes; and (iii) functional exploitation of individual …

Multifunctional Nanoscale Pigments: Emerging Risks And Circular Strategies For A Sustainable Future, Ajay Vikram Singh, Preeti Bhardwaj, Vimal Kishore, Sunil Choudhary, Akihiko Hirose, Neha Gupta, Madleen Busse, Swarn Lata Singh, Christopher J. Osgood

Biological Sciences Faculty Publications

The substantial penetration of nanoscale pigments into a range of sectors has changed the dynamics of industries such as medical, material science, and many more. Nonetheless, their persistence in the environment and probable adverse impacts on health require that an assessment of such risks be formulated considering the One Health perspective. This viewpoint considers the crossing of boundaries of progress in the nanotechnology of nanoscale pigments with environmental, animal, and human health and emphasizes the significance of collaborative activity. Traditional perspectives explain the distribution of pigment history, while the nanotechnology of today's accessibility poses problems regarding utilization, toxicities, and interactions …

A Comparison Of Microcrystal Electron Diffraction And X-Ray Powder Diffraction For The Structural Analysis Of Metal-Organic Frameworks, Erik Biehler, Silvana Pagola, Daniel Stam, Johannes Merkelbach, Christian Jandl, Tarek M. Abdel-Fattah

Chemistry & Biochemistry Faculty Publications

This study successfully implemented microcrystal electron diffraction (microED) and X-ray powder diffraction (XRPD) for the crystal structure determination of a new phase, TAF-CNU-1, Ni(C₈H₄O₄)·3H₂O, solved by microED from single microcrystals in the powder and refined at the kinematic and dynamic electron diffraction theory levels. This nickel metal–organic framework (MOF), together with its cobalt and manganese analogues with formula M (C₈H₄O₄)·2H₂O with M = Mn ^II or Co^II, were synthesized in aqueous media as one-pot preparations from the corresponding hydrated metal chlorides and sodium terephthalate, as a promising `green' synthetic route to moisture-stable MOFs. The crystal structures of the …

Fabricating Silver-Ceria Polymer Nanocomposite Scaffolds For Biomedical Therapeutic Applications, Shreya S. Pawar

Honors Undergraduate Theses

Improper healing of bone fractures and limited regeneration of bone following bone tumor resection remain a prevalent complication worldwide. Long-term effects of this include joint instability, limited movement, and arthritis. Bone infections (osteomyelitis), reactive oxygen species (ROS) generation via excessive inflammation, and underlying conditions such as osteoporosis can contribute to suboptimal bone tissue regeneration. ROS accumulation stimulates osteoblast apoptosis, while promoting osteoclast differentiation. These processes inhibit mineralization and osteogenesis. Conventional therapeutics involve the utilization of drugs and bone grafts. However, these approaches pose limitations and can result in subsequent complications. Microbial infections, ROS accumulation, and excessive inflammations are factors that …

Hafnium Oxide-Based Nanoheterostructures For Catalytic Radiosensitization And Enhanced X-Ray Radiotherapy, Marlen Dariela Calix Quezada

Theses and Dissertations

Orthovoltage X-ray beams are attractive for surface and intra-operative radiotherapy. Yet, their clinical utility is constrained by rapid attenuation and the limited dose that can be delivered without harming healthy tissue. High-Z hafnium oxide (HfO₂) nanoparticles can boost local energy deposition through the photoelectric effect, while catalytic surface defects accelerate water radiolysis. Harnessing both mechanisms in a single nano-heterostructure could enable potent radiosensitization at diagnostic-range energies.

This thesis develops and evaluates HfO₂-based nanoheterostructures, both bare and Au-decorated, as catalytic radiosensitizers.

Two types of HfO₂ were evaluated, one was synthesized following a specific route and the …

Epitaxial Quantum Dot Scintillators With Monolithic Photodetector Integration: Physics, Fabrication And Characterization Of Materials And Devices, Allan Oreave Minns

Electronic Theses & Dissertations (2024 - present)

This dissertation discloses the physics, fabrication, and characterization of high-performance scintillator detectors based on epitaxial InAs quantum dots (QDs) in GaAs. The detector crystals grown include monolithically integrated In_0.35GaAs photodetectors with Al_0.92-0.6In_0.03-0.35Ga_0.05As metamorphic buffer layers (MBL). A device fabrication process was developed for the lithographic patterning, chemical etching, contact metallization and readout integration of materials grown by means of molecular beam epitaxy (MBE) on 3-inch GaAs (001) wafers. Low capacitance integration with readout electronics was achieved through wire bonds to custom printed circuit boards (PCBs) with commercial components.

The relationship between device …

Combinatorial Thin Film Approach To Accelerate Materials Discovery: Development Of Nanoporous And Bulk Multi-Principal Element Alloys, Tibra Das Gupta

Theses and Dissertations--Chemical and Materials Engineering

Multi-principal element alloys (MPEAs) have garnered significant attention in materials science due to their potential for exhibiting a combination of desirable properties stemming from their unique configurational entropy. While early research focused on equiatomic compositions, recent studies have indicated that non-equiatomic MPEAs may offer superior mechanical performance. However, the identification of optimal non-equiatomic compositions remains challenging due to the vast compositional space and the reliance on time-consuming and computationally expensive methods. This dissertation presents a combinatorial thin film approach as a rapid and efficient strategy for discovering two types of materials: nanoporous and bulk MPEAs.

The first study explores the …

Material And Mechanical Characterization Of Sla 3d Printed Graphene Nanoplatelet-Based Nanocomposites Fabricated Within A Magnetic Field, Soka Suliman

Graduate Research Theses & Dissertations

The process of utilizing a static magnetic field to fabricate a nanomaterial-based composite via a stereolithography (SLA) 3D printing process is still a relatively new approach within the field of additive manufacturing. By using this magnetic field during the 3D printing process, both material and mechanical properties can be oriented and axially varied for enhanced characteristics. In this investigation, between 0% to 2% volume fractions of high aspect ratio, graphene nanoplatelets (GNP) are suspended within UV-curable resin during a SLA 3D printing process with a static magnetic field applied. The objective of this investigation is to determine the effect of …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Synthesis Of Activated Carbon From Coconut Shell And Recycled Styrofoam Nanofiber For Water Filtration, Rahma Dani, Ismet Ismet, Leni Marlina, Rona Alisya, Muhamad Abel Kirana Aldi, Anggi Ludiansyah, Lintang Auliya Kurdiati, Meutia Kamilatun Nuha Ap Idjan, Agung Mataram, Muhammad Rama Almafie, Ida Sriyanti

Makara Journal of Science

Water pollution affects life sustainability; hence, several efforts have been exerted to overcome this problem. For ex-ample, nanofiber membrane technology is introduced to retain solutes while allowing only water molecules to pass through the system. Therefore, this study aimed to maximize the technology for water filtration using the electrospin-ning method by combining Styrofoam waste-based polymer with activated carbon from coconut shell waste (ACCS). The nanofiber diameter produced ranged from 590 nm to 610 nm with porous characteristics and without beads. The carbon content varied from 68.04% to 69.84%, according to the energy dispersive X-ray measurement, demonstrating the composite’s effectiveness. The …

A Mechanistic Study Of Silicon Nanocrystal Formation Via Solid State Synthesis, Katherine Mccarthy Weinfurter

Dissertations and Theses

Silicon nanocrystals (SiNCs) show promising physiochemical properties that could be used in industrial applications. The production of SiNCs through solid-state synthesis is ideal due to relatively low cost of equipment and chemical reagents, as well as the ability to scale-up production. A widely known and commonly used precursor previously used in solid-state synthesis for SiNCs, hydrogen silsesquioxane (HSiO_1.5), was discontinued in chemical manufacturing, which has led to researching alternative precursors (or starting materials). We have identified that there is a gap of knowledge related to producing these precursors, as well as the mechanistic understanding of the chemical reactions …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Nanostructured Silicon Meta-Waveguides And Surfaces For Enhanced Light-Matter Interaction, Saddam Gafsi

All Dissertations

In this study, we tackle the challenge of light-matter interaction engineering and local field enhancement using various silicon photonic platforms based on three different approaches. (i) The first approach is based on boundary condition engineering where we present and show through simulation and experimental results, a silicon nanodisk “diabolo” configuration able to support significant local field enhancement levels in the range ~102 to 104 in the high index medium through proper structural modifications at the nanoscale. We show that the presented optical behavior is consistent with the anapole modes characterized by the observed near-field enhancement and coinciding with far-field suppression. …

Understanding Defect Dynamics In Black Phosphorene Under Noble Gas Ion Irradiation., Saransh Gupta

Electronic Theses and Dissertations

Controlled introduction of defects in phosphorene using high-energy ion beams offers a promising route to design novel high-performance materials for energy technologies. However, this potential remains underexplored due to a lack of fundamental understanding of the atomic-scale mechanisms governing the production, accumulation, and temporal evolution of defects during ion irradiation. Here, we employ a combination of classical and ab initio molecular dynamics simulations to elucidate the effects of ion energy, angle of incidence, noble gas ion size/mass, and fluence on (a) defect generation (i.e., point defects, topological imperfections, voids), (b) atomic-scale mechanisms of defect formation and re-arrangement, and (c) defect …