Materials Science and Engineering Commons^™

In-Situ Stabilization For Hydraulic Control At Ccr Sites, Paul R. Lear

World of Coal Ash Proceedings

No abstract provided.

Study To Evaluate Future Ash Beneficial Use, Corina Maria Aldea, Gil M. Haines, Matt Bishop

World of Coal Ash Proceedings

No abstract provided.

Coal Quality & Combustion Impacts On Ash Chemistry, Rod Hatt

World of Coal Ash Proceedings

No abstract provided.

Real Time Pore Pressure Monitoring Of Ash And Construction-Induced Responses: The State Of The Practice, Paul C. Schmall, Chris Hardin, Kenneth Campbell, Ryan Smith

World of Coal Ash Proceedings

No abstract provided.

Field And Laboratory Methods To Demonstrate Monitored Natural Attenuation For Coal Combustion Product Constituents In Groundwater, Jim Redwine, Masa Kanematsu, Kristi Mitchell, Dimitri Vlassopoulos

World of Coal Ash Proceedings

No abstract provided.

Addressing Public Fear With Facts—Tva Coal Ash Fact Sheets, Melissa Hedgecoth, Lisa Jn Bradley, Rock Vitale, Neil Carriker

World of Coal Ash Proceedings

No abstract provided.

Developing Single Use Deposits Of Coal Derived Fly Ash As A National Resource, Nigel Cooke

World of Coal Ash Proceedings

No abstract provided.

Six Years Of Service, Supply, And Success: Processing Harvested Ccr From Impoundments, William Fedorka, P.E.

World of Coal Ash Proceedings

No abstract provided.

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem

Theses and Dissertations

Designing highly active, durable, and nonprecious electrodes for overall water splitting is of urgent scientific importance to realize sustainable hydrogen production. Accordingly, the need to search efficient energy production systems is of crucial necessity. In this thesis, two various systems for sustainable hydrogen production have been reported using electrochemical and photoelectrochemical pathways. In the first part of the thesis, electrochemical water splitting involving both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been established. To this end, an innovative approach is demonstrated to synthesize flower-like 3D homogenous trimetallic Mn, Ni, Co phosphide catalysts directly on nickel foam via …

Calcite Depression In Bastnaesite-Calcite Flotation System Using Organic Acids, Emmy Muhoza

Graduate Theses, Dissertations, and Problem Reports (ETD)

Bastnaesite is the primary source of light REEs, namely cerium (Ce), lanthanum (La), praseodymium (Pr), neodymium (Nd), to name a few. Bastnaesite is typically concentrated using the froth flotation beneficiation method. Flotation of bastnaesite suffers from high reagent consumption due to the similar surface characteristics of bastnaesite and associated gangue minerals, including calcite. Additionally, complex stages of high-temperature conditioning are often required to suppress the detrimental impact of dissolved calcium ions on the flotation of bastnaesite. This research seeks to investigate the capabilities of organic acids in the bastnaesite-calcite flotation systems to selectively depress calcite minerals and effectively chelate calcium …

Broadband Dielectric Spectroscopic Detection Of Ethanol: A Side-By-Side Comparison Of Zno And Hkust-1 Mofs As Sensing Media, Papa K. Amoah, Zeinab Mohammed Hassan, Pengtao Lin, Engelbert Redel, Helmut Baumgart, Yaw S. Obeng

Electrical & Computer Engineering Faculty Publications

The most common gas sensors are based on chemically induced changes in electrical resistivity and necessarily involve making imperfect electrical contacts to the sensing materials, which introduce errors into the measurements. We leverage thermal- and chemical-induced changes in microwave propagation characteristics (i.e., S-parameters) to compare ZnO and surface-anchored metal-organic-framework (HKUST-1 MOF) thin films as sensing materials for detecting ethanol vapor, a typical volatile organic compound (VOC), at low temperatures. We show that the microwave propagation technique can detect ethanol at relatively low temperatures (<100 >°C), and afford new mechanistic insights that are inaccessible with the traditional dc-resistance-based measurements. In addition, …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Copper Slag As A Potential Waste Filler For Polyethylene-Based Composites Manufacturing, Aleksander Hejna, Paulina Kosmela, Mateusz Barczewski, Olga Mysiukiewicz, Adam Piasecki

Tanzania Journal of Science

The present study aimed to analyze the application of waste material from copper production– copper slag (ŻŻL) as filler for composites based on the high-density polyethylene (HDPE). Copper slag filler was introduced in the amounts of 1–20 wt%, and its influence on the appearance (color analysis), chemical structure (Fourier-transform infrared (FTIR) spectroscopy), microstructure (optical microscopy), as well as static (tensile tests) and dynamic (dynamical mechanical analysis (DMA)) mechanical properties of composites were investigated. Proper dispersion of filler implicated that the incorporation of up to 5 wt% of filler caused only slight, 5% drop of tensile strength, with the simultaneous 16% …

A Foray Into Laboratory Scale Soil Incubations With Corn Stover And High Lignin Fermentation Byproduct, Michelle Wang

ENGS 88 Honors Thesis (AB Students)

As the production of biofuels increases to meet the demands of a growing low carbon economy, questions of sustainability surrounding its feedstock and waste streams have become increasingly relevant. In the biofuel production process, crop residues like corn stover are harvested from the field and converted to biofuels leaving generating a residue called high lignin fermentation byproduct (HLFB). From extensive process modelling in the literature, it is suggested that HLFB should be either combusted to fuel auxiliary conversion processes or returned to the soil in place of the crop residues that were harvested. Currently, there is little literature testing the …

Fabrication And Characterization Methods Of Self-Cleaning Coatings For Solar Panels Application, Mohammed Khaleel M Alhussain

USF Tampa Graduate Theses and Dissertations

Transparent self-cleaning coatings with superhydrophobic and superhydrophilic behavior are of great interest in a wide range of industrial applications such as automotive, solar panels, windows, and optical devices. Each has its uses, properties, and characteristics. For the use of these coatings on solar panels, certain features are important in maintaining the efficiency of the panels in different weather conditions and reducing the operation and maintenance cost, such as self-cleaning, high transparency, antifouling, anti-fogging, and anti-icing. Herein, we have investigated the fabrication of self-cleaning coatings using two simple methods and ways to improve their characteristics. In the first method, a hydrophobic …

Spent Tea Leaves As An Adsorbent For Micro Solid Phase Extraction Of Polycyclic Aromatic Hydrocarbons In Different Matrices, Nazzatul Atirah Mohd Nazir

Student Works (2020-2029)

Food and water may be contaminated by hazardous pollutants, one of is a polycyclic aromatic hydrocarbon (PAHs), where 16 of pollutant in this group listed as a priority pollutant by Environmental Protection Agency (EPA). Thus, analysis of food contaminations is crucial for consumer safety. Therefore, a simple, sensitive, and miniaturize sample preparations are needed. In this study, spent tea leaves (STL), a waste from brewed tea, Camellia sinensis was utilized as novel micro-solid phase extraction (μ-SPE) sorbent for the determination of polycyclic aromatic hydrocarbon (PAHs) for the first time. It was of interest that spent tea leaves (STL) might serve …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Cellulose-Based Polymer Electrolyte Derived From Waste Coconut Husk: Residual Lignin As A Natural Plasticiser, Chua Kai Ying

Student Works (2020-2029)

Polymer electrolyte (PE) finds many applications in the fabrication of electrochemical devices such as batteries, solar cells, supercapacitors, and electrochromic windows. The usage of cellulose from the waste of coconut husk is one alternative in using natural polymer as a green electrolyte. However, due to its high crystallinity, the usage of plasticiser is advantageous to reduce the crystallinity of cellulose. Lignin which co-exists with cellulose in the cell walls of the plants could act as a natural plasticiser in preparing a good polymer electrolyte. In this work, cellulose was isolated from waste coconut husk (Cocos nucifera), modified into water-soluble carboxymethylcellulose …

Observation Of New Particle Formation In The Northern Hemisphere At Altitude From 4 To 20 Km, Mohamed Saad

Electronic Theses and Dissertations

New particle formation (NPF) is investigated using measurements of aerosol size distributions and meteorological variables made in two continents, including USA and Europe. Despite the considerably different aerosol particle abundances among the sites, a common relationship was found between the characteristics of NPF events and the air mass convective and/or advective transport. CO and O3 act as tracers of tropospheric and stratospheric air, respectively, their statistical relationship can be used to quantify air mass characteristics and origins. The mixing ratio values of CO increased within the upper troposphere layer before/during NPF events, which may serve as an indicator of occurring …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Novel Design And Facile Synthesis Of Functional Nanostructures For Energy And Environmental Application, Zhuojun Wang

Wayne State University Theses

Environmental pollution and energy crisis are two of the major obstacles in the development of a more sustainable society. It is an interesting but technically challenging task to design novel methods for the facile and scalable synthesis of multifunctional materials for applications in both energy storage and environmental remediation. In this thesis, I tried to design and synthesize novel nanostructured materials for energy and environmental applications, achieved highly promising results. I developed a facile electrochemical approach to synthesize the zinc oxide with the zinc element for photocatalytic reactions. It demonstrated dramatically improved performances in degradation of organic pollutant in water, …

Optimisation Of Retrofit Wall Insulation: An Irish Case Study, Rakshit D. Muddu, D M. Gowda, Anthony James Robinson, Aimee Byrne

Articles

Ireland has one of the highest rates of emissions per capita in the world and its residential sector is responsible for approximately 10% of total national CO2 emissions. Therefore, reducing the CO2 emissions in this sector will play a decisive role in achieving EU targets of reducing emissions by 40% by 2030. To better inform decisions regarding retrofit of the existing building stock, this study proposes Optimum Insulation Thicknesses (OIT) for typical walls in 25 regions in Ireland. The calculation of OIT includes annual heat energy expenditure, CO2 emissions, and material payback period. The approach taken is based on Heating …

Recovery Of Phosphorus From Florida Phosphatic Waste Clay, Amir Eskanlou

Graduate Theses, Dissertations, and Problem Reports (ETD)

This MS thesis examines the recovery of phosphorus (P) from Florida waste clay (WC). A comprehensive literature review revealed that: (i)-The most important values being lost to WC are P and rare earth elements (REEs). For the recovery of these values from WC, two crucial attempts are the removal of extremely fine-sized clays, followed by the recovery of phosphate content, which can pave the path for the recovery of REEs; (ii)-Any scientific/ technological solution should, at the same time, be economically and environmentally attractive to the industry. As such, moving from mostly chemical separation processes to the primarily physical/ physicochemical …

Effect Of Citric Acid On Slump, Compressive Strength, And Setting Time Of Belitic Calcium Sulfoaluminate Concrete, Israel Aguilar Rosero

Graduate Theses and Dissertations

Belitic calcium sulfoaluminate (BCSA) cement has well established advantages related to fast setting time, fast strength gain, long-term strengths, shrinkage, and sustainability. Due to its fast setting and hardening, this type of cement has historically been used to repair concrete structures, highways, and runways. This work provides much needed guidance on establishing mix design criteria for BCSA cement. Guidance is also given on the effects of set retarders on strength, slump, and setting times. Citric acid and a phosphonic acid-based admixture were tested as retarders for different concrete mixtures. Three studies were performed. In the slump study five different water …

Environmental Investigation Of Bio-Modification Of Steel Slag Through Microbially Induced Carbonate Precipitation, Junke Zhang, Peidong Su, Yadong Li, Lin Li

Civil and Architectural Engineering Faculty Research

Steel slag (SS) is one of byproduct of steel manufacture industry. The environmental concerns of SS may limit their re-use in different applications. The goal of this study was to investigate the leaching behavior of metals from SS before and after treated by microbially induced carbonate precipitation (MICP). Toxicity characteristic leaching procedure, synthetic precipitation leaching procedure and water leaching tests were performed to evaluate the leaching behavior of major elements (Fe, Mg and Ca) and trace elements (Ba, Cu and Mn) in three scenarios. The concentrations of leaching metals increased with the content of SS. After it reached the peak …

Tailoring And Remotely Switching Performance Of Ultrafiltration Membranes By Magnetically Responsive Polymer Chains, Anh Vu, Arijit Sengupta, Emily Freeman, Xianghong Qian, Mathias Ulbricht, S. Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Magnetically responsive ultrafiltration membranes were prepared by grafting poly(2-hydroxyethyl methacrylate) chains from the outer surface of 100-kDa regenerated cellulose ultrafiltration membranes. Surface-initiated atom transfer radical polymerization was used to graft the polymer chains. Grafting from the internal pore surface was suppressed by using glycerol as a pore-filling solvent during initiator immobilization at varied densities. Glycerol suppresses the initiator attachment to the pore surface. Polymerization times of up to four hours were investigated. Superparamagnetic nanoparticles were covalently attached to the chain end. Membrane performance was determined using bovine serum albumin and dextran as model solutes. Increasing the grafted polymer chain density …

The Influence Of Surface Types Towards Run-Off Water In Urban Park, Febby Andini

International Programs

Pavements in Alun Kapuas Park constribute 63 of run off water over the capacity of the soil to infiltrate. This water will potentially causes the flooding and puddling issues.

Numerical And Analytical Methods To Predict Behavior Of Reinforced Ductile Concrete Composites, Mandeep Pokhrel

Dissertations

Structural components constructed with ductile concrete composites, such as high-performance fiber-reinforced cementitious composites (HPFRCC), are known to perform exceptionally well under extreme mechanical and environmental loading conditions compared to traditional concrete. HPFRCC flexural components exhibit enhanced performance in terms of displacement ductility, energy dissipation capacity, and damage tolerance capacity. However, recent research suggests that the flexural behavior of reinforced HPFRCCs in terms of crack progression, reinforcement plasticity, and failure mechanism is significantly different than conventional reinforced concrete. Specifically, the failure mode of flexural members is found to be predominantly through the fracture of longitudinal reinforcement rather than compression crushing of …