Materials Science and Engineering Commons^™

Journal Of Electrochemistry Is Selected To Entering Ici Journals Master List, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Goodbye With Tears! Deep Condolences To Academician Zhao-Wu Tian!, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Adviser Of Journal Of Electrochemistry Professor Christian Amatore Received The Chinese Government Friendship Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Characterization Of Wood Plastic Composites Made Of Rice Straw And Recycled Low-Density Polyethylene, Waleed Mohamed Hassona Dr., Ahmed Elkassas, Nader Zaafarani

Journal of Engineering Research

In this work, the physical and mechanical properties of a fabricated wood-plastic composite (WPC) in accordance with the internationally recognized standard are investigated. The wood-plastic composite is made from recycled low-density polyethylene and mechanically processed rice straw fibers by using a specially designed extrusion machine. From the physical test, it was found that the newly developed WPC has low water absorption and thickness swelling compared to the standard limits. The mechanical tests revealed an improvement of the modulus of rupture and modulus of elasticity by the increase of fiber content to 65%. The highest recorded values of the modulus of …

Deep-Learning Based Microstructure Reconstruction And Generation, Cameron J. Maloney, Lucas Taliaferro

College of Engineering Summer Undergraduate Research Program

Characterizing the microstructural behavior of materials is crucial for understanding their properties and performance. Traditional imaging methods, such as optical microscopy and electron microscopy, are effective but costly and time-consuming. Computational approaches can reduce costs and time while expanding the accessibility of microstructural analysis through the generation of new microstructure images. Traditional computational approaches, namely descriptor-based approaches, are slow but effective in low-data scenarios. Modern approaches use machine learning (ML), which is faster but often requires a lot of data to approach the performance of descriptor-based methods. This research leverages a special data-efficient Generative Adversarial Network (GAN) architecture to artificially …

Intrinsic Manipulation Of Microstructure And Strength Of Ice-Templated Lithium Titanate, Rohan Parai

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation focuses on developing a fabrication landscape first time ever for directionally porous lithium titanate (LTO) materials using ice-templating technique. Ice-templating, a promising fabrication technique for porous ceramics, enables the formation of sintered structures with anisotropic pores that are aligned to improve mechanical stability of materials.

The work presented in this dissertation addresses advancements in tuning the porosity, strength, and microstructural characteristics of ice-templated LTO materials through adjustments of intrinsic variables, including sucrose as a water-soluble additive, variations in freezing front velocity, solute concentration, and solid loading. First, this study demonstrated that adding sucrose in LTO suspensions increased the …

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Electronic Communication Between Co And Ru Sites Decorated On Nitrogen-Doped Carbon Nanotubes Boost The Alkaline Hydrogen Evolution Reaction, Meng-Ting Gao, Ying Wei, Xue-Meng Hu, Wenj-Jie Zhu, Qing-Qing Liu, Jin-Yuan Qiang, Wan-Wan Liu, Ying Wang, Xu Li, Jian-Feng Huang, Yong-Qiang Feng

Journal of Electrochemistry

Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction (HER) remains a significant challenge. Here, a novel and efficient cobalt (Co), ruthenium (Ru) bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes (CoRu@N-CNTs), was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis. Benefiting from the electronic communication between Co and Ru sites, the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity. To deliver a current density of 10 mA·cm^–2, it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec …

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Experimental Study Of Drag Characteristics And Dust Removal Performance Of A Hybrid Wet-Filter Precipitator, Hang Yi, Zifeng Yang, Deqiang Chang, Xinjiao Tian, Jingxian Liu

Mechanical and Materials Engineering Faculty Publications

With their advantages of high dust removal efficiency and low drag characteristics, hybrid wet-filter precipitators have great potential for dust control in coal mines, but the underlying mechanisms are not well understood. In this study, to help fill this knowledge gap, a hybrid wet-filter precipitator consisting of a 40-layer metal filter and a defogger device is designed and a prototype is constructed. Experiments are conducted to investigate its drag characteristics under wind velocities from 0.85 to 5.68 m/s and its dust removal performance under wind velocities of 2 and 4 m/s. On the basis of results with the initial design, …

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Hollow Connecting Rod Thin Wall Austempered Ductile Iron (Twadi) For Manufacturing Light Weight Components, Ricardina Freitas Da Silva, Bambang Suharno, Rianti Dewi Sulamet-Ariobimo

Journal of Materials Exploration and Findings

Efforts made by the automotive industry to reduce energy consumption have encouraged researchers to carry out various studies. One way is to make components lighter by casting thin wall austempered ductile iron (TWADI). Reducing the weight of components such as connecting rods (conrod) will result in lower energy consumption, but provided that these components still meet standards in terms of mechanical properties and microstructure or even exceed them. In this research, design optimization was applied to conrod by making the area I-beam zero mm (hollow), with hope that it can replace conrod Vespa PX-150. While the manufacturing process is divided …

Analysis Of Ballistic Capability In Making Bulletproof Multilayers Using Woven Ramie Fiber, Hardfacing Metal With Epoxy Matrix For Bulletproof Vests, Rizal Wahyu Permana, Syamsul Hadi, Bima Cahya Maula Dana

Journal of Mechanical Engineering Science and Technology (JMEST)

Bulletproof material in level III bulletproof vests must be created using hard and soft materials to prevent bullet penetration. Kevlar and SiC + PE are imported materials used as armor in bulletproof vests. The use of Kevlar and SiC is very dependent on foreign sources with high prices. An innovation was carried out by making bulletproof material using cheaper multilayer methods involving metal from hardfacing welding as a hard layer and ramie fiber as a soft layer with an epoxy matrix. To see the level of penetration and surface morphology structure in the specimens, 9 variations were made: 3 layers …

Study Of A Remote Wind Resource Assessment System Integrated With Internet Of Things, Filian Arbiyani, Filbert Filbert, Anthony Nathanael Theo

Journal of Mechanical Engineering Science and Technology (JMEST)

Wind energy is an emerging and popular source of clean energy due to its non-polluting nature and low cost. The efficient use of wind energy requires accurate and precise wind parameter measurements, which is where wind resource assessment (WRA) comes into play. The IoT and cloud-based systems have been applied to remote monitoring systems and provide crucial solutions for data acquisition, storage, and analytics in wind energy technology. This study aims to build a remote WRA system integrated with the Internet of Things. This study utilizes an Arduino Uno microcontroller, RK100-01 wind speed sensor, BMP280 temperature and pressure sensor, and …

Metal Casting Furnace Design Development Using Computer Simulation, Ramadhan Wahyu Irianto, Yanuar R.A. Pradana, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Metal foundries still rely heavily on crucible furnaces. The current furnace design, which is currently being used by the partner industry, has been found to be not properly designed and will result in a reduction in efficiency. CFD simulation will be used to find the optimal melting furnace design. This research simulation consists of 3 stages: pre-processing, solving, and post-processing. There are two furnace geometries, cylindrical and hexagonal, while the burner location will be divided into 3 positions, namely P1, P2, and P3. The most optimal furnace design will be used as a basis for the verification testing process. The …

Evolution Of Residual Stress, Crystal Orientation, And Texture On Preheating Weld Treatment Of Low Carbon Steel Astm A572 Grade 42, Suratno Adi Saputro, Andoko Andoko, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Preheating is one type of heat treatment on the material prior to starting the welding process by increasing the temperature of the material. It is used to reduce the cooling rate during the welding processes to minimize the risk of residual stress and cracking during welding. Besides the benefits of welding, it also has a negative impact, especially on the integrity of the material, because the heating process at high temperatures will cause residual stress, which will affect the mechanical properties, chemical composition, and microstructure of the material, especially on Heat Affected Zone (HAZ). This study aims to analyze the …

Static And Modal Analysis Of A Box Structured Satellite Deployment Mechanism With Self-Actuated Torsion Joint, Dongping Sheng, Renzhe Ma, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

A brand-new satellite deployment mechanism with boxed structure and self-actuated torsion joints is proposed and an effective method to verify the feasibility of this mechanism is established in this paper. This mechanism has the characteristics of high base frequency, high ratio of deployed and folded space occupation ratio. In order to meet the design requirements, the related analysis and optimization need to be conducted, and several conclusions are obtained. Firstly, the modal analysis of deployment mechanism at folded and fully deployed state is analyzed, and the result showed that the proper wall thickness is the key parameter to satisfy the …

A Review Of Fault Detecting Devices For Belt Conveyor Idlers, Fahad Alharbi, Suhuai Luo

Journal of Mechanical Engineering Science and Technology (JMEST)

The shift towards automated inspection methods represents considerable progress in conveyor system maintenance, enhancing safety and efficiency while posing challenges in data analysis and implementation costs. This study critically analyses sensor technologies and inspection methods for detecting faults in conveyor belt idlers, highlighting their essential role in preserving the operational integrity of industrial conveyor systems. By synthesizing various research findings, the study assesses the effectiveness of different sensor devices in identifying defects, including built-in sensors, fixed sensor options like acoustic, ultrasonic sensors, cameras, accelerometers, and Distributed Optical Fibre Sensors (DOFS), as well as mobile sensor systems. Our findings emphasize the …

Simulation Of The Performance Of Kevlar Impregnated Shear Thickening Fluid Ballistic Test Results, Ridwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

This study explores the enhancement of Kevlar fabric’s ballistic performance through impregnation with Shear Thickening Fluid (STF) for potential application in soft body armor. The experimental approach often fails to elucidate mechanical phenomena critical for the development of lightweight and high-strength body armor designs. To address this limitation, the finite element method, specifically using ANSYS/LS-DYNA R.13, was employed for a comprehensive analysis. The simulation aimed to evaluate the impact of STF on Kevlar fabric by assessing projectile velocity, force exerted by the projectile onto the fabric, displacement, stress distribution, and fabric failure mechanisms. Kevlar yarn was modeled as a shell …

Analysis Of Avgas Fuel Spraying Schemes Using The Ansys Application Approach, Dimas Endrawan Putra, Nasrul Ilminnafik, M Fahrur Rozy Hentihu, Muh. Nurkoyim Kustanto, Danang Yudistiro, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

Avgas fuel consumption on Cessna trainer aircraft is very high. However, there has been little research regarding spray impacts in Cessna aircraft engines. The phenomenon of avgas spray colliding with the cylinder wall may occur during fuel injection, resulting in a changed spray radius and height, which will affect the mixing of fuel and air. In several aspects, this affects engine performance and exhaust emissions on Cessna aircraft. This research aims to determine and study the phenomenon of spray impact on avgasfueled aircraft engines. The fuel spray in the study occurred in the combustion chamber using pressure from a fuel …

Effect Of Addition Titanium Dioxide Nanoparticle On Properties Of Pineapple Leaf Fiber Mediated Tempo Oxidation, Rahmad Ikrom Ramadhan, Heru Suryanto, Ahmad Atif Fikri, Aminnudin Aminnudin, Jibril Maulana, Faqih Fadillah, Mohamed T. Mito, Kemal Masera

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is an agricultural country with the potential to grow many plants as natural fiber sources. In order to improve its properties, natural fiber needs to be treated by applying nanomaterial so that it can compete with the characteristics of synthetic fibers. The study aims to determine the influence of adding titanium dioxide (TiO2) nanoparticles on pineapple leaf fiber (PALF) characteristics. The PALF was collected from the Subang plantation (Indonesia). The chemical treatment was carried out with pre-treatment using an alkalization process for 3 hours, and the oxidation process was carried out with TEMPO. TiO2 nanoparticle grafting was carried out …