Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1 - 30 of 2925

Full-Text Articles in Materials Science and Engineering

Effects Of Ball Milling Duration And Sintering Temperature On Mechanical Alloying Fe3si, Varistha Chobpattana, Chakansin Phoomkong, Peerawat Nutnual, Kritsada Thaengthong, Wanchai Pijitrojana Jan 2054

Effects Of Ball Milling Duration And Sintering Temperature On Mechanical Alloying Fe3si, Varistha Chobpattana, Chakansin Phoomkong, Peerawat Nutnual, Kritsada Thaengthong, Wanchai Pijitrojana

Journal of Metals, Materials and Minerals

Fe3Si is under interest as a ferromagnetic electrode of magnetic tunneling junctions (MTJs). Its crystalline structure is important for achieving high device efficiency. This work focuses on mechanical alloying of 3:1 ratio of 99% pure Fe and Si powder mixtures by ball milling and sintering. The mixtures were ball-milled for various durations up to 20 h. Then, they were sintered from 400°C  to 800°C for 4 h in Ar.  SEM images and particle size analysis show significant reduction in average particle size of the mixtures after ball milling for 20 h. The longer duration of ball milling process promotes powder …

Go to article

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono Sep 2026

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono

Journal of Mechanical Engineering Science and Technology (JMEST)

Water-powered funicular railways are an environmentally friendly mode of transport whose efficiency heavily depends on the principle of gravity. However, their operation is vulnerable to natural wind disturbances that can hinder speed or cause a risk of overturning on steep, curved tracks. This study aims to analyse the influence of funicular car model design on the rolling moment exerted on the rails as the car turns to enter a track branch. The research methodology involves aerodynamic simulations using SolidWorks flow simulation, comparing three body models: WAHYUDI, FUNAERO, and AEROFUN. Simulations were conducted with variations in turn angles (10° to 30°) …

Go to article

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid Sep 2026

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid

Journal of Sustainable Construction Materials and Technologies

The use of precast concrete structures with grouted sleeve (GS) connections has gained significant traction in the acceleration of bridge construction. The plastic hinge length (Lp) is a critical parameter for assessing the seismic performance and deformation capacity of such structural members. The previous study has proposed empirical equations for Lp in monolithic columns; however, a comprehensive understanding of the influential parameters on Lp in precast concrete columns with GS connections remains limited. This study presents a detailed parametric investigation to evaluate the effects of key design parameters on the plastic hinge length of a precast concrete columns with GS …

Go to article

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto Sep 2026

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Renewable energy from lignocellulosic biomass is a promising alternative to fossil fuels. Coconut shell (CS) waste is a favorable precursor for porous carbon due to its high carbon content, abundance, and non-food nature. However, conventional biochar often has limited surface area and catalytic active sites, hindering its effectiveness as a catalyst. While Fe-based modifications are promising, the use of ferric nitrate-assisted activation of coconut-shell-derived porous carbon remains underexplored. This research focused on developing an Fe-doped porous carbon catalyst from CS via ultrasound-assisted impregnation, followed by activation in a tube furnace. CS biochar was produced through pyrolysis at 550 °C and …

Go to article

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao Aug 2026

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao

Journal of Electrochemistry

Seawater electrolyte-based metal-air batteries exhibit great promise for marine energy supply systems. However, conventional statistical analysis methods, though applicable to seawater metal-air battery lifetime prediction, have inherent limitations of insufficient prediction accuracy and large error. Herein, a deep time-series regression framework based on InceptionTime and incorporating prior-biased attention pooling is proposed to construct a nonlinear mapping between electrochemical performance sequences and the discharge termination time of catalysts. Specifically, chronoamperometric profiles are employed to extract long-term stability features, while prior knowledge derived from linear sweep voltammetry is introduced to strengthen the attention weighting over critical potential regions. Under a nested leave-one-catalyst-out …

Go to article

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li Aug 2026

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li

Journal of Electrochemistry

Electrocatalytic nitrate reduction to ammonia (NitRR) represents a sustainable pathway that integrates environmental remediation with the production of high-value ammonia. However, the activity and selectivity of this process are limited by the generation, consumption, and dynamic equilibrium of the key transient intermediate—active hydrogen (*H). Precise modulation of *H necessitates a comprehensive understanding of its behavior, which relies fundamentally on advanced in situ electrochemical characterization techniques. However, a systematic review dedicated to the rational selection and application of in situ electrochemical techniques for the specific characterization of *H in NitRR, with clear definitions of each technique's "detectable targets, quantitative accuracy, and …

Go to article

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang Aug 2026

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang

Journal of Electrochemistry

Developing cost-efficient and durable multifunctional electrocatalysts of hydrogen evolution reaction, oxygen reduction reaction and oxygen evolution reaction is crucial for improving energy conversion efficiency in electrolytic water splitting electrolyzer and advancing rechargeable zinc-air batteries. Polyhedral shaped nanocrystals with well-defined crystal facets represent a type of model catalysts that enables the exploration of structure-activity relationships. However, it is still very challenging to prepare alloy nanocrystals with multiple metal components due to their complicated redox potentials and mixing enthalpy. Herein, we report a rapid microwave-assisted polyol reduction method for syntheses of core-shell Pd@PdPtCu, Pd@PdPtCuNi, Pd@PdPtCuCo and Pd@PdPtCuZn octahedral nanocrystals, and recessed truncated-octahedral …

Go to article

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto Aug 2026

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Go to article

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo Aug 2026

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Go to article

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya Aug 2026

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya

Tanzania Journal of Science

Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive to tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nanostructurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt.%, cured for 7 and 28 days, were evaluated. Notably, the compressive strength increased by 16 % and the flexural strength by 13 % at 0.1 wt.% NOCNF compared to plain concrete …

Go to article

Additive Manufacturing Of Metals: Mechanical Properties And Their Implications, Sean Chih Aug 2026

Additive Manufacturing Of Metals: Mechanical Properties And Their Implications, Sean Chih

Discovery Day - Daytona Beach

Additive manufacturing of metals is a relatively new and groundbreaking approach to manufacturing high-performance components. However, variability in mechanical properties from the process creates a barrier before this manufacturing technique can be widely applied. Understanding when and where to use this manufacturing is also important to create components with efficiency and without harmful defects. The objective of this research is to evaluate the effects of build orientation, printing parameters, internal defects, thermal history, and residual stresses, post-processing heat treatments, and fatigue behavior on additively manufactured components. Literature-based research is conducted on commonly used metals for additive manufacturing, such as stainless …

Go to article

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser Jul 2026

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser

Journal of Mechanical Engineering Science and Technology (JMEST)

Sugarcane is one of the important commodities in the industry where bagasse fiber as waste is abundantly available.   Sugarcane bagasse fiber has high cellulose, a key element in the utilization of bagasse. Chemical pretreatment is important to prepare the natural fiber before used as composite reinforcement. The purpose of the study is to analyze the thermal degradation of bagasse fiber after being treated using NaOH and TEMPO solution. The manufacturing method was carried out by a series of washing bagasse with distilled water and NaOH solution, subsequently soaking it in 6% NaOH and 2,2,6,6-tetramethylpiperidine-l-oxyl (TEMPO) solution, and conducted oven-dried. Thermogravimetric …

Go to article

In-Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu Jul 2026

In-Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu

Journal of Electrochemistry

Para-aminothiophenol (PATP) is not only a widely-used probe molecule in the field of surface-enhanced Raman spectroscopy (SERS), but also an important model molecule for interfacial reactions, exhibiting distinct photo- and electro-oxidation pathways, so that PATP is selectively activated under different external fields. The evolution of products and intermediates during electrochemical oxidative coupling remains unknown. In this study, we have investigated the dynamic electrochemical oxidation process of PATP on the Au(111) surface using cyclic voltammetry, electrochemical (EC)-SERS, and in situ electrochemical scanning tunneling microscopy (EC-STM). The results showed that PATP forms an unsaturated adsorption coverage on Au(111) in an acidic solution. …

Go to article

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu Jul 2026

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu

Journal of Electrochemistry

Green hydrogen production via alkaline seawater electrolysis offers an environmentally sustainable and potentially cost-effective route to address both energy and climate challenges. Achieving long-term anode stability under complex ionic environments and industrial current densities remains a central bottleneck. Specifically, Ni-based anodes exhibit intense surface reconstruction during the oxygen evolution reaction, necessitating dynamic anti-corrosion strategies. This mini review systematically summarizes reconstruction engineering approaches to develop anti-corrosion Ni-based anodes of alkaline seawater electrolysis across increasingly complex ionic environments from simulated seawater to real seawater: (i) Cl– dominated; (ii) Cl– with co-existing oxyanions, and (iii) Cl–  with co-existing Br– …

Go to article

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang Jul 2026

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang

Journal of Electrochemistry

Mullite-structured oxides exhibit excellent oxygen reduction reaction activity, possess a low thermal expansion coefficient due to their unique crystal structure, and can eliminate the need for a barrier layer and simplify the preparation process as they contain no alkaline earth elements. Thus, they hold great promise as novel cathode materials for solid oxide fuel cells. In this work, a mullite-spinel-structured SmMn2O5-NiMn2O4 (SMO-NMO) composite cathode was one-step synthesized via a solid-liquid composite route, and its in-situ self-assembly enabled good compatibility with the electrolyte without any barrier layer. Characterization results showed that the SMO:NMO = …

Go to article

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli Jul 2026

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of ethanol-blended fuel in a standard vehicle can reduce combustion quality, which has an impact on decreasing vehicle performance. At the above 20% blend level, it affects vehicle performance and requires adjustments to engine settings or the Electronic Control Unit (ECU) before use on conventional engines. This study investigates the effect of aftermarket ECU settings on the performance of a 150 cc motorcycle operating on a gasoline-ethanol blend. Four fuel variations were tested: Pertalite (P100), revvo 90 (R100), and 30% ethanol blends (PE30 and RE30). This study analyzes the effects of optimizing injection duration and ignition timing settings …

Go to article

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika Jul 2026

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika

Journal of Mechanical Engineering Science and Technology (JMEST)

The processes of moulding and reinforcing chemical elements have a big impact on the balance of chemical composition in copper-based bearing alloys. This has a direct impact on how well the material works. This study examines Cu–Sn alloys produced via sand casting and Cu–Zn alloys fabricated through permanent mould casting, with the incorporation of nickel, which remains uncommon. The objective was to examine the variations in the equilibrium of the chemical composition and the performance potential of the bearing alloy metal when subjected to different casting techniques and nickel concentrations ranging from 0% to 4%. Some of the methods used …

Go to article

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah Jul 2026

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO2-Al2O3 hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO2-Al2O3 mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Go to article

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly Jul 2026

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Go to article

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa Jul 2026

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Go to article

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch Jul 2026

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Go to article

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek Jul 2026

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Go to article

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono - Jul 2026

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono -

Journal of Mechanical Engineering Science and Technology (JMEST)

The objective of this study is to model variations in pump geometry to obtain optimal performance under the effects of cavitation. The resulting geometric variation models were then simulated using ANSYS Fluent software. The first geometric variation model used a standard 5-blade impeller with suction pipe diameter variations of 2, 2 ½, 2 ¾, 3, 3 ¼, 3 ½, and 4 inches. The second geometric variation model for simulation used a standard 3-inch suction pipe with impeller blade variations of 3, 4, 5, 6, 7, 8, and 9. The simulation results indicated that the number of blades without changes in …

Go to article

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj Jul 2026

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fiber reinforced composites are increasingly being developed due to their environmentally friendly nature, low production costs, and safety for human health. However, the presence of lignin and hemicellulose reduces adhesion properties between fiber and composite matrix. Alkalization treatment is an effective way to remove lignin and hemicellulose attached to cellulose. This study aims to determine the optimum concentration of NaOH used during alkalization process of pineapple stem fiber. The methods included the retting process of fibers from pineapple stems. The obtained fibers were soaked in variations of 2%, 4%, 6%, and 8% NaOH for 4 hours,  then dried and …

Go to article

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju Jul 2026

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Go to article

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf Jul 2026

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Go to article

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett Jul 2026

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The martensitic and magnetic transformations, as well as the mechanical properties, of Ni₂MnAl alloys in as-cast (AC) and heat-treated (HT) conditions were investigated. Magnetic-field-induced strain was evaluated via magnetostriction, with reversible strains of 0.14% and 0.2% achieved in the martensitic phase at 2 K for the AC and HT alloys, respectively. Transformation temperatures and Curie temperatures were determined under constant applied magnetic field, revealing that γ-phase inclusions in the AC microstructure suppress antiferromagnetic domain response, yielding a lower magnetization (∼8.4 emu g⁻¹) compared to the HT alloy (∼13.4 emu g⁻¹). Both alloys exhibited hysteretic behavior in the martensitic state and …

Go to article

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang Jun 2026

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li+↔Na+ cationic exchange was used to simultaneously induce Li+ and Na+ cations into the NASICON-type framework of Li3–xNaxZr2Si2PO12 (0 < x < 3). We show that the interpenetration of NaO6 and NaO8 coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Go to article

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang Jun 2026

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)2Cl2, and evaluated their performance in CO2 reduction reaction (CO2RR). The planar CoHAM exhibited dramatically superior CO2RR performance compared to the non-planar Co(phen)2Cl2. Through a series of combined analyses using in-situ …

Go to article

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen Jun 2026

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li+/Na+/K+) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li+ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li+ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na+/K+ ions preferentially enrich at the graphite/binder interface, forming …

Go to article

Next Last