Materials Science and Engineering Commons^™

Multidentate Surfactant-Dependent Synthesis Of Giant Iridium Superstructures, Ramjee Balasubramanian, Maeren E. Hill

Chemistry & Biochemistry Faculty Publications

Giant superstructures of iridium, comprised of smaller spherical and slightly larger anisotropic nanoparticles, were synthesized by reducing iridium chloride in the presence of resorcinarene, a class of tetrameric macrocyclic polyphenols, with sodium borohydride in ethanol in 30 min under mild conditions. These superstructures were characterized by a range of techniques including TEM, HRTEM, EDS and other spectroscopic methods. The impact of the macrocyclic surfactant, its features and reaction conditions in dictating the formation of giant iridium superstructures was evaluated. The packing density of nanoparticles in these giant iridium superstructures could be altered qualitatively by varying the duration of the reaction, …

Feasibility Of Upcycling Spent Lithium-Ion Battery To Carbon Dioxide Capture Adsorbent, Chimezie Frank Onwudinjo

Master’s Theses

This study investigates the feasibility of repurposing spent lithium-ion battery (SLIB) to lithium orthosilicate (Li₄SiO₄), a high temperature carbon dioxide sorbent. Two synthesis pathways including conventional acid-leaching method (Scenario 1) and a pyrolysis-based route (Scenario 2) were explored. Additionally, techno-economic analysis (TEA) and lifecycle assessment (LCA) of the two processes were also performed. Different analytical characterization techniques were performed to understand the material properties of Li₄SiO₄ including surface area, crystallinity, morphology and thermal stability. CO₂ capture performance of the synthesized Li₄SiO₄ was tested in a thermogravimetric analyzer (TGA) using …

Investigation Of Fine-Grain Cu And Cu Alloys For Low-Temperature Hybrid Bonding Applications, Sarabjot Singh

Electronic Theses & Dissertations (2024 - present)

Hybrid bonding has emerged as a key enabler for next-generation three-dimensional (3D) integration, offering fine-pitch interconnects and improved electrical performance. However, conventional Cu–Cu hybrid bonding typically requires elevated temperatures to achieve sufficient diffusion and interface quality, posing challenges for temperature-sensitive device integration and process compatibility. This work investigates materials engineering approaches to enable low-temperature Cu–Cu bonding through both microstructure design and alloying strategies.

This work begins by examining grain refinement in Cu as a pathway to enhance diffusion through increased grain boundary density, providing efficient atomic transport without introducing additional elements. Three Cu-based systems Cu–Co, Cu–Ag, and Cu–Al were systematically …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Utilizing Coal For Mesophase Pitch-Based Carbon Fiber Production: Precursors, Processes, And Progress, Christina M. Thompson

Theses and Dissertations--Chemistry

Graphitic materials possess unique properties due to the unique combination of layered crystalline structure and carbon’s low atomic weight. High performance carbon fiber is one such example, displaying exceptional strength-to-weight ratios, stiffness, and thermal and chemical resistance. These properties render high performance carbon fiber a critical structural reinforcement material in the manufacture of composites across various industries, such as for automotive and aerospace applications. However, balancing fiber performance with precursor and processing costs remains a challenge. As alternative carbonaceous feedstocks are explored, coal has gained interest for utilization in graphitic products as a relatively abundant and low-cost source of aromatic …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Improving Modeling Of Corrosion Products In The Primary Circuit Of Light Water Reactors Through The Experimental Determination Of Crud Characteristics, Sri Saravana Konganapuram Narasimma Bharathi

Electronic Theses & Dissertations (2024 - present)

High-temperature water flowing through the coolant circuits in pressurized water reactors (PWRs) creates a harsh environment, deteriorating these materials. This corrosion results in the formation of oxide layer(s) primarily composed of nickel ferrites, iron oxides, nickel oxides, and other nickel-iron-chrome spinel oxides. Being exposed to fluid with high flow rates and pressure, these oxide layers can be eroded, resulting in particulate fouling due to the release of corrosion products (Chalk River Unidentified Deposits, CRUD) into the coolant circuit. When CRUD subsequently deposits on fuel surfaces, it negatively affects the fuel performance (heat transfer and fuel failure); in addition, the particles …

Re-Crosslinkable Hyper-Branched Polymer Gels Based On A Transamidation Reaction, Tao Song, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the field of conformance control in oil fields, particularly to a re-crosslinkable preformed particle gel system, and composition thereof. The composition of the re-crosslinkable preformed particle gel system contains monomers, crosslinkers, a polymer matrix, and additives. Components in the composition for re-crosslinkable preformed particle gel in the present invention have excellent compatibility with each other, and the obtained gel has excellent long term high-temperature resistance property. Different from prior products, in the recrosslinkable preformed particle gel compositions according to embodiments of the present invention, the components that are used to re-crosslink the particle gels …

Engineering Electrospun Pvdf Nanofibers For Next-Generation Wearable Bioelectronics, Reshmi Banerjee, Gymama Slaughter

Center for Bioelectronics Publications

Electrospun poly(vinylidene fluoride) (PVDF) and P(VDF-TrFE) nanofibers offer a mechanically flexible, high-surface-area platform for wearable bioelectronics, including piezoelectric sensing and self-powered operation. This review establishes a process–structure–property–performance framework for engineering electrospun PVDF- and P(VDF-TrFE)-based wearable systems. Relationships amongst precursor composition, electrospinning parameters, fiber morphology and alignment, crystalline phase formation, dipole orientation, and device-level piezoelectric performance are examined. Electrospinning is compared with other established fabrication methods including solution casting, spin coating, melt processing, phase inversion, and printing in terms of electroactive β-phase fraction, flexibility, scalability, manufacturing complexity, cost, and wearable-device suitability. Device architectures and performance are evaluated across pressure and strain …

Computational Design Of Nanoporous Materials For The Adsorption Of Per- And Polyfluoroalkyl Substances, Daniel D. Mottern

Dissertations

Per- and polyfluoroalkyl substances (PFAS) are a large family of chemicals that have seen wide usage due to their fluorinated carbon backbone. The presence of strong C-F bonds in the backbone lends PFAS molecules high thermal and chemical stability, as well as strong hydrophobicity and lipophobicity. This combination of properties has led to heavy use of PFAS as surfactants, non-stick coatings, and aqueous foam forming films and flame retardants. However, these properties bring their own consequences. The high chemical and thermal stability of PFAS renders them persistent, with the C-F bonds resisting naturally occurring forms of degradation. Existing forms of …

Data-Driven Analysis And Atomistic Simulations Of Next-Generation Materials For Energy Conversion And Storage, Yuliang Shi

Dissertations

Metal-organic frameworks (MOFs), with their modular architectures and tunable properties, represent an especially rich domain for accelerated material design and discovery for a range of diverse applications. Within this class of multifunctional materials, two-dimensional (2D) electrically conductive MOFs (EC MOFs) are of particular interest, as their 7r-stacked layered structures combine permanent porosity with electronic conductivity, enabling potential breakthroughs in energy storage, energy conversion, and quantum sensing. But the discovery and design of new EC MOFs based on expensive experimental screening is increasingly impractical due to the infinite chemical space. Furthermore, the practical implementation of EC MOFs for specific tasks depends …

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Two Members Of The Editorial Board Of Journal Electrochemistry, Kai Wu Elected As An Academician Of The Chinese Academy Of Engineering And Yi Cui A Foreign Academician Of The Chinese Academy Of Sciences, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electrochemical Characterization And Modulation Of Biological Processes, Yue-Qi Li, Wei-Hua Huang, De-Chen Jiang, Bao-Hong Liu, Bin Su, Yang Tian, Jing-Juan Xu, Ping Yu, Feng Zhao, Huang-Xian Ju, Jing-Hong Li

Journal of Electrochemistry

Electrochemical processes lie at the core of biological function, governing energy transduction, metabolic flux, and molecular signaling. Recent advances in electrochemical science now allow these processes to be probed and controlled with unprecedented spatial, temporal, and chemical resolution. In this review, we present an integrated framework that progresses from fundamental mechanisms to analytical technologies and functional modulation. We begin by outlining electron transfer pathways in mitochondrial respiration, microbial extracellular electron transfer, and DNA- and protein-based charge conduction, followed by the principles of photon-electron conversion in photosynthesis and the central role of redox equilibrium in coordinating cellular responses. We then highlight …

A Novel Electrolyte Pyridine Additive For Enhancing Cycle Life Of Lithium-Ion Batteries, Peng-Cheng Wang, Ding-Chang Li, Jun-Tao Li, Guang-Bo Lu, Shi-Wen Wang

Journal of Electrochemistry

Lithium-ion (Li-ion) battery using a graphite (Gr.) anode and a lithium iron phosphate (LiFePO₄, LFP) cathode (Gr.||LFP) has been widespread in energy storage. To match the warranty period of energy storage systems, the lifespan of this kind of Li-ion battery, not only under room temperature but also under relatively high temperature, is critical. Exploration of functional electrolyte additive provides an efficient approach to address this issue. This study reports the usage of pyridine (Py) as a new electrolyte functional additive for Gr.||LFP. In the first cycle, it was found that Py can be reduced before ethylene carbonate and …

Journal Of Electrochemistry Officially Indexed By Leading Oa Databases Oarl And Coaj, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Feature Column Of Journal Of Electrochemistry Nominated For 2025 Top 10 Famous Columns Of Fujian Provincial Newspapers And Periodicals, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Upcycling Commodity Polymers To Advanced Materials For Energy And Environmental Sustainability, Anthony Griffin-Espinoza

Dissertations

Synthetic polymers play an essential role in nearly every aspect of our lives. Extending beyond single-use packaging, polymeric material design has progressed to attain tailorable architectures granting exceptional performance across advanced applications, including carbon-fiber reinforced polymer composites for aerospace, conductive materials for soft electronics, and drug carriers for biomedicine. While highly promising, intricately designed polymers needed to achieve excellent performance often have limited processability, complex synthetic methods, and expensive precursors. Furthermore, due to a lack of recyclability, commodity polymer waste streams result in both environmental impacts and a substantial loss of economic value. This dissertation focuses on developing robust strategies …

Automation And Upgrading Of Custom Cold Wall Uhv-Cvd Reactor For Group Iv Material Development, Alexander Golden

Graduate Theses and Dissertations

Group IV alloys have shown promising results for infrared optoelectronic applications where III-V materials are currently dominant. The III-V material system has vacancies that Group IV materials can fill, most importantly complementary metal oxide semiconductor (CMOS) process compatibility making quality devices much cheaper and widely available compared to the current state of the art. Silicon, being an indirect band gap Group IV material, has poor performance in optoelectronic applications but is the dominant material for most of the electronic industry. However, when silicon is alloyed or substituted with other group IV materials, these optoelectronic properties can be enhanced and, in …

Development Of A Digestion Procedure Using Fe2+ Ions For Electrochemical Detection Of Mno2 Particles In Drinking Water, Kayla Elliott, Sarah Jane Payne, Zhe She

Journal of Electrochemistry

Developing methods for detection contaminants in drinking water is essential to ensuring that safe and acceptable quality drinking water is delivered to consumers. While manganese (Mn) was previously known only as a mere aesthetic issue, recent epidemiological data has shown to have negative neurological effects on humans, especially on children, prompting new health-based guidelines by Health Canada and the World Health Organization. In drinking water, Mn exists predominantly as Mn(II) and Mn(IV), and is regulated based on total Mn levels. Interestingly, measurement of Mn particulate using electroanalytical methods has not yet been reported in the literature. Herein, a digestion procedure …

Regulating Lithium Metal Nucleation And Growth For Dendrite Suppression: From Liquid-Electrolyte To Solid-State Batteries, Ao Du, Juan Zhang, Pan Xu, Ya-Jie Li, Kang-Yu Yi, Zhen-Zhen Shen, Hui-Lin Ge, Guang-Wen Zhang, Chao-Hui Zhang, Yu-Hao Wang, Chen-Zi Zhao, Meng-Yang Xu, Yu-Lin Jie, Rui Wen, Shu-Hong Jiao, Si-Qi Shi, Qiang Zhang, Chun-Peng Yang, Yu-Guo Guo

Journal of Electrochemistry

Lithium metal anodes, with a theoretical capacity of up to 3860 mAh·g⁻¹, are regarded as the cornerstone for developing next-generation high-energy-density batteries. However, several key challenges hinder their practical applications, including dendrite formation, unstable solid electrolyte interphase (SEI), side reactions with electrolytes, and associated safety risks. This review systematically explores the mechanisms of lithium nucleation, growth, and stripping in both liquid and solid-state battery systems, analyzing critical theoretical concepts like heterogeneous nucleation thermodynamics, surface diffusion kinetics, space charge effects, and SEI-induced nucleation, which are crucial for understanding the genesis of dendrite growth. Additionally, the review discusses the electrochemical-mechanical …

Biocompatible And Antibacterial Pcl-Tio2@Ag/Γ-Cd Mof Nanocomposite Coating For Corrosion Resistance Of Magnesium Alloy In Simulated Body Fluid, Sara Dehghan-Chenar, Hamid R. Zare, Zahra Mohammadpour, Maryam Sadat Mirbagheri-Firoozabad

Journal of Electrochemistry

Magnesium alloys are promising candidates for bio-implant applications due to their biodegradability and biocompatibility. However, their rapid corrosion remains a critical limitation. This study presents the development of a multifunctional nanocomposite coating designed to enhance the corrosion resistance and antibacterial properties of magnesium alloy implants. The coating comprised γ-cyclodextrin metal-organic frameworks (γ-CD MOFs) decorated with TiO₂@Ag core-shell nanoparticles, embedded in a polycaprolactone (PCL) matrix. Immersion tests in a simulated body fluid (SBF) revealed an initially higher corrosion rate for the PCL-TiO₂@Ag/γ-CD MOF coating compared to the coating without TiO₂@Ag nanoparticles; however, it demonstrated significant …

Elucidating The Effects Of Water Activity On The Hydration Kinetics And Thermodynamics Of Ye’Elimite–Calcium Sulfate Hydrate Systems, Godwin I. Ogbuehi, Rupack R. Halder, Aditya Kumar, Gaurav Sant, Monday U. Okoronkwo

Materials Science and Engineering Faculty Research & Creative Works

Relative humidity and water activity (aH) reductions have been known to suppress the hydration of anhydrous cement clinker phases. However, the relationship between ye'elimite (C4A3$) hydration kinetics and water activity remain unclear. This study employs experimental and thermodynamic modeling approaches to investigate the influence of water activity on ye'elimite hydration in the "C4A3$ + water", and "C4A3$ + gypsum + water" systems. Experimental findings indicate that as water activity decreases, C4A3$ hydration diminishes until the reaction is brought to a halt at a threshold aH. The critical aHand corresponding solubility constant of C4A3$ (KC4A3S¯) estimated from thermodynamic analysis are 0.46 …