Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2341 - 2370 of 2632

Full-Text Articles in Materials Science and Engineering

Investigation Of Solution Chemistry In Crevice Of Carbon Steel And Its Anodic Polarization Behavior, Zhuo Chen, Cui-Wei Du, Bei Cao, Yin-Shun Wu, Hai Yang, Zheng-Rong Zhang May 1999

Investigation Of Solution Chemistry In Crevice Of Carbon Steel And Its Anodic Polarization Behavior, Zhuo Chen, Cui-Wei Du, Bei Cao, Yin-Shun Wu, Hai Yang, Zheng-Rong Zhang

Journal of Electrochemistry

A self-made wedge-shaped simulated crevice apparatus was designed to investigate the solution chemistry in crevice of carbon steel and its anodic polarization behavior. For carbon steel with 3.5%(wt) NaCl, the change and the distribution of electrode potential, concentration of Cl- and pH value of solution in the crevice, and the current density of metal in the crevice were measured respectively under various conditions of anodic polarization. The results showed that without polarization the metal about 2 cm away from the opening of the crevice was attacked preferentially because of its lowest free corrosion potential. The anodic polarization promoted the …

Go to article

The Behaviors Of Capacity Loss Of Limn2O4 Cathodeat Elevated Temperatures, Xiao-Hong Hu, Han-Xi Yang, Xin-Ping Ai, Sheng-Xian Li, Xin-Lin Hong May 1999

The Behaviors Of Capacity Loss Of Limn2O4 Cathodeat Elevated Temperatures, Xiao-Hong Hu, Han-Xi Yang, Xin-Ping Ai, Sheng-Xian Li, Xin-Lin Hong

Journal of Electrochemistry

The capacity loss of spinel LiMn2O4 cathode at elevated temperatures was evaluated by constant current charge-discharge methods and it was found that serious capacity loss and cycleability decrease occured at above 50, especially for the charged cells. The mechanisms for this phenomena were examined by atomic emission and infrared spectrometry of the electrolyte, XRD measurment of the cycled elecrode and microelectrode voltammetry of LiMn2O4 at room and elevated temperatures. The results showed that with increasing temperature, Mn and Li ions tended to redistribute partly in the spinel framework due to the disproportion of Mn …

Go to article

Effect Of Inhibitor On Electrochemical Behavior Of 1cr18 Stainless Steel In Acidic Solution Under Friction, Jin-Ping Xiong May 1999

Effect Of Inhibitor On Electrochemical Behavior Of 1cr18 Stainless Steel In Acidic Solution Under Friction, Jin-Ping Xiong

Journal of Electrochemistry

The electrochemical behavior of 1Cr18 stainless steel had been studied using a reciprocating triboelectrochemical equipment under friction in 0.2 mol/L H2SO4 solution with and without addition of thiourea, the frictionized surface of 1Cr18 stainless steel had been examined by the SEM, XPS and IR. The results showed that the loss rate of 1Cr18 stainless steel in the solution could be reduced by addition of thiourea. The adsorption of thiourea on the surface of 1Cr18 stainless steel prohibited the oxidization of Cr3+ to form Cr(Ⅵ) and formation of passive film consisting of CrO42- or/and Cr(Ⅵ), …

Go to article

Electrochemical Behavior Of Riboflavin On Glassy Carbon Electrode, Hong Li, Lin-Cai Jiang, Liang-Nian Ji May 1999

Electrochemical Behavior Of Riboflavin On Glassy Carbon Electrode, Hong Li, Lin-Cai Jiang, Liang-Nian Ji

Journal of Electrochemistry

The electrochemical behavior of riboflavin(RF) on glassy carbon has been investigated by using potential sweep, rotating ring-disc electrode and the measurement of differential capacitance. It is shown that a single well-behaved oxidation-reduction wave corresponding to a reversible two-electrons reaction apears in medium of pH<6, and the adsorption of RFH2 formed by electro-reduction is weak and hence its solubility is good. In medium of pH>6, there are two separating but overlapping partly oxidation-reduction waves corresponding to two-step one-electron reaction. The adsorptions of RFH and RFH2 produced by reduction reactions in medium of 6

Go to article

Study On The Microband Array Electrode-Based Glucose Microsensor, Neng-Qin Jia, Chui-Jue Sun, Lin Gao, Zong-Rang Zhang, Jian-Zhong Zhu, Guo-Xiong Zhang May 1999

Study On The Microband Array Electrode-Based Glucose Microsensor, Neng-Qin Jia, Chui-Jue Sun, Lin Gao, Zong-Rang Zhang, Jian-Zhong Zhu, Guo-Xiong Zhang

Journal of Electrochemistry

The microband array electrode (MAE) consisting of 11 Pt microband of 5 m in wide, 2000 m long and 85 m gap was fabricated with a thin film techology. The MAE was characterized by means of cyclic voltammetry in a solution of K3Fe(CN)6 and H2O2. The results showed higher current density on MAE than on conventional Pt eletrode due to the strong edge effect of the former. A glucose microsensor was constructed with the substrate electrode of microband array. Microband array electrode was modified by Nafion followed by the immobilization of ferrocene onto …

Go to article

Oxidation And Adsorption Of Deoxyribonucleic Acid At Highly Ordered Pyrolytic Graphite And Glass Carbon Electrode, Jian-Zhang Zhou, Ling-Ling Wu, Jin Luo, Zhong-Hua Lin May 1999

Oxidation And Adsorption Of Deoxyribonucleic Acid At Highly Ordered Pyrolytic Graphite And Glass Carbon Electrode, Jian-Zhang Zhou, Ling-Ling Wu, Jin Luo, Zhong-Hua Lin

Journal of Electrochemistry

It is shown that calf thymus DNA (CT DNA) can be adsorbed at highly ordered pyrolytic graphite (HOPG) electrode and detected by differential pulse voltammetry (DPV) and electrochemical atomic force microscopy (ECAFM). It is found that controlled potential pre-polarization influences largely the adsorption of dsDNA while it has little influence on ssDNA. It is demonstrated that ECAFM is useful to exploit adsorption of DNA at HOPGE. The pattern of adsorption of DNA at HOPG electrode that fits best with the experimental data is proposed. The results aslo shows that UV/Vis reflection spectroscopy, which has not been used in studying electrochemical …

Go to article

Study On The Hydrogen Permeation Through Zinc Electrodeposit, Jiang-Li Cao, Ji-Xun Wu, Yan-Ping Lu, Jie Shi May 1999

Study On The Hydrogen Permeation Through Zinc Electrodeposit, Jiang-Li Cao, Ji-Xun Wu, Yan-Ping Lu, Jie Shi

Journal of Electrochemistry

The electrochemical hydrogen-permeation technique was used to study hydrogen permeation through zinc electrodeposit with bilayer specimens of Fe substrate/zinc electrodeposit. The effect of coating thickness on hydrogen diffusion coefficient and hydrogen steady-state flux was studied. The results showed that hydrogen diffusion coefficient was approximately in the range of 10-11 cm2·s-1 rank and zinc coating could retard hydrogen permeation. Accordingly, hydrogen steady-state flux and effective diffusion coefficient declined while the coating thickness increased.

Go to article

In Situ Ftir Spectroelectrochemical Study Of Palladium Hexacyanoferrate Thin Film Deposited On Glassy Carbon Electrode, Ai-Li Bo, Xiang-Qin Lin May 1999

In Situ Ftir Spectroelectrochemical Study Of Palladium Hexacyanoferrate Thin Film Deposited On Glassy Carbon Electrode, Ai-Li Bo, Xiang-Qin Lin

Journal of Electrochemistry

The electrochemically deposited Palladium hexacyanoferrate thin film on Glassy Carbon electrode (PdHCF|GC) has been studied in HCl, KCl and NaCl solutions by in-situ external reflection FTIR spectroelectrochemical technique. It is found that the behavior of the electroactive PdHCF film can be understood in terms of two states: Pd2Fe(II)(CN)6 formed in the inner layer and (M+)2Fe(II)(CN)6 (M+: electrolyte cation) formed in the outer layer. The inner layer is oxidized at Em=0.87 V in 1 mol/L KCl, while for the outer layer Em=0.77 V(vs. Ag/AgCl). In 1 mol/L NaCl or HCl solutions, …

Go to article

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao May 1999

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao

Journal of Electrochemistry

With cycling voltammetry curve(C-V), TEM and SEM photographs, the influence of PTFE and Nafion on the platinum utilization in catalyst layer of PEMFC was investigated. The results show that in gas diffusion electrode, the blocking effect of PTFE in the platinum utilization is not pronunced. In the thin-film catalyst layer, the electron conduct of the catalyst was blocked by the nafion solid and this caused the decrease of platinum utilization. With the increase of the nafion content in the catalyst layer, both platinum utilization and the electron conductivity decreased in the catalyst layer. Because the molecule size of nafion is …

Go to article

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu May 1999

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu

Journal of Electrochemistry

A novel method for preparation of gold-film composed of ultra-fine gold particles was reported in this paper. The gold-film was prepared by electrochemical method on the surface of the paste electrode modified with the strain Bacillus sp. D01 which has strong ability to absorb and reduce Au3+. In addition, this paper reported an experimental method of determining trace amount of Cu2+ in water solution using cathodic stripping analysis to estimate the performances of the obtained gold-film. The experimental results indicated that this new method for preparation of gold-film is simple. The obtained gold-film electrode is stable and …

Go to article

Magnetic And Mössbauer Spectral Study Of Mixed Valent La₀.₂Sr₀.₈Cu₀.₂Fe₀.₈O2.68 And Related Perovskites, Gary J. Long, Dimitri Hautot, Amitabh Mohan, Ingeborg Kaus, Harlan U. Anderson, Fernande Grandjean Apr 1999

Magnetic And Mössbauer Spectral Study Of Mixed Valent La₀.₂Sr₀.₈Cu₀.₂Fe₀.₈O2.68 And Related Perovskites, Gary J. Long, Dimitri Hautot, Amitabh Mohan, Ingeborg Kaus, Harlan U. Anderson, Fernande Grandjean

Chemistry Faculty Research & Creative Works

The La0.2Sr0.8Cu1-xFexO 3-δ perovskites are important because they are mixed electron and oxygen anion conductors and thus are able to serve as dense oxygen separation membranes. In order to better understand the mechanism for this separation a Mössbauer spectral study has been carried out to determine the ratio of iron(III) to iron(IV) in these mixed valent compounds. The Mössbauer spectra of La0.2Sr0.8Cu0.2Fe0.8O 3-δ obtained between 4.2 and 78 K reveal that its Néel temperature is ~75 K and the two well-resolved magnetic sextets observed …

Go to article

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi Feb 1999

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi

Journal of Electrochemistry

Separating the functions of current collection and gas flow distribution and then to design two separate elements to achieve the desired performance characteristics, a nonconventional cell structure for proton exchange membrane fuel cells bave been developed. The current collector is achieved using a thin stain steel sheet, the gas flow distribution is achieved using a carbon paper that has the desired chemical durabiliy when in contact with the proton exchange membrane. Combining these two separate elements into a single divice yields a bifunctional device that performs as a bipolar separator plate. The advantages of this alternative appproach to making biplar …

Go to article

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Feb 1999

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A reaction kinetic study for electrochemical oxidation of benzene was performed on a PbO2 rotating disk electrode in 1 mol/L H2SO4 aqueous solution. The reaction orders, the activation energies and transfer coefficient were measured, and the kinetic expression was obtained.

Go to article

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang Feb 1999

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

There exist two oxidation current peaks on the anodic polarization curve between -0.7 V and 0 V (SCE) in Na-hypophosphite solution. Peak Ⅰ (-0.55 V, SCE) , which represents the oxidation process from H2PO2- to H2PO3-, has been studied previously. Peak Ⅱ, which is located at the potential about -0.4 V (SCE), is investigated emphatically in this paper. The results show that, peak Ⅰ and Ⅱ are corresponding to two successive steps in oxidation process of H2PO2-, i.e. peak Ⅱ corresponds to the oxidation process of …

Go to article

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji Feb 1999

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji

Journal of Electrochemistry

A new polymer E-T was synthesized and used as a corrosion inhibitor for reinforced concrete. The inhibitive behavior and mechanism were studied with linear polarization, Tafel polarization, EIS and XPS method in simulated pore solution system with concrete samples. The result showed that the polymer was a mixing type inhibitor. A 1% dosage was sufficient to imhibit the corrosion of steel in simulated pore solution system. The salt endurance was enhanced from 0.02 mol/L to 0.10 mol/L. The result also showed the good synergetic effect of NaNO2, especially in low NaNO2 concentration. The EIS showed that E-T …

Go to article

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song Feb 1999

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song

Journal of Electrochemistry

The surface of the spherical nickel hydroxide particles used as an active material in pasted nickel electrodes is surface-deposited with cobalt. This paper investigated the effects of the amount of cobalt deposit on the characteristics of nickel hydroxide electrode. The performances of the electrode, such as discharge capacity, utilization of active material and reversibility of Ni(OH)2/NiOOH redox reaction, were studied by comparing the charging/discharging curves and cyclic voltammograms. The mechanism of action of cobalt deposits has been described in terms of the electrochemical impedance spectroscopy of nickel hydroxide electrode.

Go to article

Electrohydrodimerization Of Fumarodinitrile On Liquid Gallium Electrode, He Wei, Huang Ying, Sheng-Tao Zhang Feb 1999

Electrohydrodimerization Of Fumarodinitrile On Liquid Gallium Electrode, He Wei, Huang Ying, Sheng-Tao Zhang

Journal of Electrochemistry

Electrohydrodimerization (EHD) of fumarodinitrile on liquid gallium electrode can take place not only in hydrotropic solution of tetraethylammonium p-toluenesulphonate (TEA-PTS), but also in aqueous solution containing low concentration of strong surfactants, such as TritonX-100. In solution without organic surfactant, FDN yields a single two-electron reduction wave corresponding to the formation of a saturated monomer called as butanedinitrile. If some TEA-PTS or TritonX-100 is added into the solution, the original two-electron wave is splitted into two continuous single-electron reduction wave and corresponding EHD of fumarodinitrile is obtained.

Go to article

Study Of Localized Corrosion Of Metals By Using The Electrochemical Techniques With Spatial Resolution, Chang-Jian Lin, Xiang-Dong Zhuo, Zu-De Feng, Rong-Gui Du, Zhao-Wu Tian Feb 1999

Study Of Localized Corrosion Of Metals By Using The Electrochemical Techniques With Spatial Resolution, Chang-Jian Lin, Xiang-Dong Zhuo, Zu-De Feng, Rong-Gui Du, Zhao-Wu Tian

Journal of Electrochemistry

The electrochemical inhomogeneities at interface of metal/solution play an important and often controlling role in localized corrosion of metals. The traditional electrochemical techniques involving potential, current density or ac impedance measurements over bulk specimens can only provide average and general information of the interface. Thus, the development of in situ imaging techniques is essential for further characterizing electrochemical inhomogeneities at the metal/solution interface of localized corrosion system. The electrochemical techniques with spatial resolution,including scanning single micro electrode, scanning double micro electrodse and scanning micro chemical probes are reviewed. The effects of electrochemical inhomogeneities on the corrosion behavior, and the mechanism …

Go to article

Electrochemical Surface Characterization Of Titanium Alloy(Ti-6al-4v), Jian-Zhong Chen, Qing-Liang Gao, Zhong-Yi Wang, Wen-Jing Xue Feb 1999

Electrochemical Surface Characterization Of Titanium Alloy(Ti-6al-4v), Jian-Zhong Chen, Qing-Liang Gao, Zhong-Yi Wang, Wen-Jing Xue

Journal of Electrochemistry

With its low density and high strength ratio, titanium alloy(Ti6Al4V) has become one of the most important materials both in the fields of aerospace and biomedical assays. Recently, titanium alloy was used as the implantation materials in human body because of its biocompatibility. The elecrochemical impedance techniques were then used to investigate the corrosion behavior of this material in hydrochloride and sulfuric acid solutions. A comparison between impedance spectra and anodic polarization over the correlated range of applied voltage confirms that AC impedance data can be used as a powerful tool for surface characterization of titanium …

Go to article

Study On The Mechanism Of Ni/Zro2 Composite Electrodeposition, Qun-Jia Peng, Dao-Bin Mu, Ju-Sheng Ma, Xiang-Yun Tang Feb 1999

Study On The Mechanism Of Ni/Zro2 Composite Electrodeposition, Qun-Jia Peng, Dao-Bin Mu, Ju-Sheng Ma, Xiang-Yun Tang

Journal of Electrochemistry

The effects of cathodic current density and amount of particle dispersion in solution on the codeposition of Ni/ZrO2 composite in Watts bath were studied, and the machanism of the composite electrodeposition was investigated. The study shows that the composite electrodeposition is controlled by the transfer of particles to the cathode when the dispersion amount is small, causing the decrease of the codeposition with the increase of current density. With large amount dispersion, the composite electrodeposition is first controlled by the strong adsorption of particles on the cathode at low current density, resulting in the increase of the codeposition with …

Go to article

Electrodeposition Of Neodymium-Iron Group Alloy Films In (P-Ch3C6H4So3)3Nd System, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang, Yan-Sheng Yang Feb 1999

Electrodeposition Of Neodymium-Iron Group Alloy Films In (P-Ch3C6H4So3)3Nd System, Peng Liu, Ye-Xiang Tong, Qi-Qin Yang, Yan-Sheng Yang

Journal of Electrochemistry

Neodymium p-toluenesulfonate was prepared and applied to the electrodepositon of neodymium-iron group alloy films. This salt has high solubility in DMF and can be dehydrated easily. Cyclic voltammograms of Pt electrode in (p-CH3C6H4SO3) 3Nd + MCl2(M=Fe,Co,Ni) + DMF indicated that the neodymiun-iron group alloys can be elcetrodeposited from this medium, the Nd-Fe, Nd-Co and Nd-Ni films were obtained by electrolysis at constant potential. The Nd-Fe, Nd-Co and Nd-Ni films are amorphous in which the rare earth contents are in the range of 15 at%～60 at% as analyzed by XRD and …

Go to article

Pitting Corrosion Of Ni-Based Alloy In Thiosulfate-Ion Containing Chloride Solutions, Yung-Fa Lee, Ting-Yu Wang, Wen-Ta Tsai Feb 1999

Pitting Corrosion Of Ni-Based Alloy In Thiosulfate-Ion Containing Chloride Solutions, Yung-Fa Lee, Ting-Yu Wang, Wen-Ta Tsai

Journal of Electrochemistry

The effect of thiosulfate ion on the pitting corrosion behavior of Ni-Based Alloy 690 in chloride solution was investigated. In plain sodium thiosulfate solution, Alloy 690 was immune to pitting corrosion. However, the addition of low concentration of sodium thiosulfate can enhance the initiation of pitting corrosion of Alloy 690. Nevertheless, inhibition of pitting corrosion was observed at high concentration of addition.

Go to article

Effect Of Stress On Electrochemical Behaviour Of Various Thermal History Zones And Different Phase Structures On The Weldment For Low Alloy Steel, Yin-Shun Wu, De-Yu Liu, Bei Cao, Feng-Li Wang, Zhi Fang, Lin Zhang, Zheng-Rong Zhang, Hai Yang Feb 1999

Effect Of Stress On Electrochemical Behaviour Of Various Thermal History Zones And Different Phase Structures On The Weldment For Low Alloy Steel, Yin-Shun Wu, De-Yu Liu, Bei Cao, Feng-Li Wang, Zhi Fang, Lin Zhang, Zheng-Rong Zhang, Hai Yang

Journal of Electrochemistry

The electrochemical behaviour of various thermal history zones on the weldment for steel 16Mn and also of the ferrite, pearlite in various zones was measured by use of a self-developed measuring technique for investigating the electrochemicl behaviour of single and mixed phase structures in metal materials. Especially the effect of stress on this electrochemical behaviour was investigated. The results showed that by comparison with non-stress condition, the free corrosion potential of the various thermal history zones and of the ferrite, pearlite under stress condition was shifted in negative direction, correspondingly their free corrosion current density was increased, the free corrosion …

Go to article

Study On Steel Corrosion In Simulated Biofilm Environment In Seawater, Qing-Fei Wang, Jing Sui, Run-Xi Su, De-Ying Kong, Shi-Zhe Song Feb 1999

Study On Steel Corrosion In Simulated Biofilm Environment In Seawater, Qing-Fei Wang, Jing Sui, Run-Xi Su, De-Ying Kong, Shi-Zhe Song

Journal of Electrochemistry

Biofilm is one of the main factors that influence metal corrosion in seawater environment. According to the structure and property of biofilm, a natural biopolymeric gel, calcium alginate(an extracellular biopolymer containing carboxylate functional groups) can deposite on metal surfaces to form films. Corrosion behavior of alloyed steel E2, 10CrMoAl and 18-8 stainless steel were studied in simulated biofilm environment by various electrochemical methods ,including measurements of the corrosion potential, polarization curves,galvanic current and electrochemical impedance. The results show that such an approach is informative to reveal “how” and “to what extent” biofilm can influence the metal corrosion process.

Go to article

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin Feb 1999

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

XRD, TEM, ICP, low scan-rate CV and charge/discharge tests were carried out for the studies on the structural and electrochemical behavior of a prepared 3 V manganese oxide cathode for rechargeable lithium ion batteries.XRD analysis revealed that the cathode sample is mainly composed of tunneled Todorokite and layered Vernadite. TEM investigation confirmed that the morphology of the sample is a laminated construction with approximate 10nm layer space. The reversibility of Li+ removal/intercalation and structural stability of this sample framework to lithium insertion are good in CV and charge/discharge tests. The discharge capacities were found to be about 129mAh/g obtained …

Go to article

Preparation Of Phase Homogeneous Mn-Zn Ferrite Powder By Spray Pyrolysis, Xinyu Zhao, Baicun Zheng, Hongchen Gu, Chunzhong Li, Shi C. Zhang, P. D. Ownby Jan 1999

Preparation Of Phase Homogeneous Mn-Zn Ferrite Powder By Spray Pyrolysis, Xinyu Zhao, Baicun Zheng, Hongchen Gu, Chunzhong Li, Shi C. Zhang, P. D. Ownby

Materials Science and Engineering Faculty Research & Creative Works

Two kinds of aqueous precursor solutions are used to synthesize Mn-Zn ferrite powders: (i) nitrate (NO) precursor-derived from solutions of Mn(NO3)2, Zn(NO3)2, and Fe(NO3)3; and (ii) acetate (AC) precursor-derived from solutions of Mn(CH3COOO)2, Zn(CHCH3COOO)2, and Fe(NO3)3. The composition of the powders synthesized from the precursor AC is very uniform, whereas powders derived from the precursor NO have Mn and Zn segregated on the particle surfaces. In addition, the powders synthesized from precursor AC are solid spherical …

Go to article

X-Ray Absorption, Neutron Diffraction, And Mössbauer Effect Studies Of Mnzn-Ferrite Processed Through High-Energy Ball Milling, D. J. Fatemi, V. G. Harris, Mingxing Chen, Satish K. Malik, William B. Yelon, Gary J. Long, Amitabh Mohan Jan 1999

X-Ray Absorption, Neutron Diffraction, And Mössbauer Effect Studies Of Mnzn-Ferrite Processed Through High-Energy Ball Milling, D. J. Fatemi, V. G. Harris, Mingxing Chen, Satish K. Malik, William B. Yelon, Gary J. Long, Amitabh Mohan

Physics Faculty Research & Creative Works

MnZn-ferrite has been prepared via high-energy ball milling of elemental oxides MnO, ZnO, and α-Fe2O3. Neutron diffraction measurements suggest a high density of vacancies in a spinel structure. The spinel phase appears to comprise 99.8 wt % of the material in the sample milled for 40 h, with the remainder attributable to unreacted α-Fe2O3. The x-ray absorption near-edge structure was analyzed to provide an understanding of the charge state of the constituent Fe ions. This analysis reveals about 2/3 of Fe cations to be trivalent, increasing to about 3/4 after a 5 …

Go to article

Thermal Characterization Of Pmma Thin Films On Silica Using Modulated Differential Scanning Calorimetry, Crystal E. Porter, Frank D. Blum Jan 1999

Thermal Characterization Of Pmma Thin Films On Silica Using Modulated Differential Scanning Calorimetry, Crystal E. Porter, Frank D. Blum

Chemistry Faculty Research & Creative Works

The number of studies of thin polymer films has increased over recent years as technological processes incorporate the use of nanomaterials. An enhanced understanding of these films would enable us to predict bound-polymer behavior and thus improve the efficiency of processes and the quality of products. This is especially true as the thickness of the films approach molecular dimensions. The glass transition temperature of a polymer is one of the most important properties for characterization because it indicates how the polymer might perform macroscopically. when a polymer is confined, such as one the surface of a substrate, its behavior is …

Go to article

Dynamics Of Acrylic Coupling Agents At Interfaces Of Composites, Hyoryoon Jo, Frank D. Blum Jan 1999

Dynamics Of Acrylic Coupling Agents At Interfaces Of Composites, Hyoryoon Jo, Frank D. Blum

Chemistry Faculty Research & Creative Works

Most applications of polymers involve composites, wherein a polymer is used in conjunction with another material, typically a solid fiber or filler. A coupling agent can enhance the adhesion between a polymer matrix and an inorganic filler. Organofunctional silanes, RSiX are often used as coupling agents. The methoxy or ethoxy group, X, can typically be hydrolyzed with water and an acid or a base catalyst in a protic solvent. The silanol groups of a hydrolyzed coupling agent can condense with other silanol groups from a glass surface, while the alkyl group, R, blends physically or bonds chemically to the polymer …

Go to article

The Effect Of Suspended Particles On The Corrosion Resistance Of Electrodeposited Zinc Powders, Qing-Wen Li, Qing Yang, Xi Xia Nov 1998

The Effect Of Suspended Particles On The Corrosion Resistance Of Electrodeposited Zinc Powders, Qing-Wen Li, Qing Yang, Xi Xia

Journal of Electrochemistry

Zinc powders were electrodeposited from ZnCl2 baths with containing suspension of unsoluble particles such as graphite, PbO2, SnO2, TiO2, SiO2 etc.. The structure, morphology and corrosion behavior of zinc powder were analyzed. SEM results showed that the dendritic growth of zinc can be inhibited by applying the suspension method. Suspension of PbO2, SnO2, TiO2, SiO2 and In2O3 could greatly improve the corrosion protection of zinc powder in 5 mol/L KOH. In addition, fractal theory is employed to further explain the results

Go to article

First Prev Next Last