Mechanics of Materials Commons^™

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Electrodeposition Of Gallium Nitride_Unraveling The Role Of Precursors, Deposition Conditions, And Substrate Effects For Semiconductor Applications, Mauricio Azier Leyva Aranzabal

Open Access Theses & Dissertations

Gallium nitride (GaN) is a wide-bandgap semiconductor noted for its remarkable optoelectronic and structural characteristics, rendering it a potential material for high-power, high-frequency, and optoelectronic device applications. This dissertation investigates the electrochemical synthesis of GaN thin films by potentiostatic and galvanostatic electrodeposition techniques using aqueous solutions of gallium nitrate (Ga(NO3)3), ammonium nitrate (NH4NO3), and auxiliary agents like potassium nitrate and urea. The main aim is to examine the essential elements affecting nitrogen incorporation and film shape while assessing electrochemical performance on various conductive substrates.A thorough investigation was performed to evaluate the impacts of electrodeposition duration, electrolyte pH, precursor molar concentrations, …

Modeling Degradation In Li-Ion Batteries: Analyzing Single-Cell Degradation And Applying It To Customized Pack-Level, Mohannad Y. Alkhalil

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The rapid expansion of lithium-ion (Li-ion) battery applications in areas such as electric vehicles (EVs), renewable energy storage, and portable electronics has drawn attention to the need for improving their performance, safety, and longevity. As Li-ion batteries become essential across technologies, understanding degradation mechanisms is critical for optimizing design and ensuring reliable operation. This work provides a detailed overview of modeling degradation in Li-ion batteries, focusing on single-cell behavior and its implications for pack-level performance.

The PyBaMM (Python Battery Mathematical Modeling) package, an open-source battery simulation tool written in Python, is used for single-cell simulations. Liionpack, another Python-based library, is …

Development Of Porous Separators For Lithium-Ion Batteries Via 3d Printing And Thermally Induced Phase Separation, Abraham Enchinton

Open Access Theses & Dissertations

Additive manufacturing processes allow the development of custom-shape rechargeable batteries, but research in custom filaments for fused deposition modeling (FDM) of battery separators has remained limited until now. This study discusses the development and optimization of a composite thermoplastic filament feedstock to 3D print separator membranes. A number of post-processing steps - leveraging the thermally induced phase separation (TIPS) of the composite filament - are introduced in tandem with FDM to promote microporosity formation through the removal of the sacrificial diluent phase within 3D printed samples. Three distinct compositions of varying polymer/diluent ratios were developed and thoroughly investigated through thermogravimetric …

Analysis Of Additively Manufactured Inconel 718 Combustion Behavior In Promoted Oxygen Environments, Dominic George Dieguez

Open Access Theses & Dissertations

Promoted combustion testing is a vital tool for engineers to establish the combustion and flammability characteristics of materials (metallic or otherwise) in oxygen enriched environments. Historically, much of the established data for metallic promoted combustion has been with regards to materials in their cast and wrought forms. However, with the emergence of additive manufacturing as a preferred method of fabrication, the need exists to evaluate how metals in that form behave. Recent testing has demonstrated that even if a metal or alloy is nominally the same with regards to chemistry, flammability between samples in the wrought form can differ significantly …

Earth Abundant Catalyst For Evironmental Sustainability Applications, Javier Hernandez

Open Access Theses & Dissertations

The development of experimental methodologies for synthesizing a diverse range of metallic and metal oxide nanoparticles tailored for sustainable water treatment applications was investigated. These nanoparticles are prepared using environmentally friendly and scalable synthesis methods, underscoring their potential for large-scale production. Synthesized nanoparticles are harnessed for various processes, including catalysis and electrocatalysis, with a primary objective of degrading and removing organic pollutants from water. Key to this research is the encapsulation of nanoparticles within solid supports. Multiple methodologies are explored to engineer supports that ensure nanoparticle stabilization, monodispersion, and prevent unintended release into the environment. Two alternative approaches were evaluated …

Niobate Nanosheet Catalysts For Cationic Dye Intercalation And Solar-Driven Water Photolysis, Cassandra Idona Monárrez-Grendahl

Open Access Theses & Dissertations

With the goal of creating efficient visible light photocatalysts for water photolysis, in this work we are exploring the synthesis of new porous oxide materials derived from potassium triniobate (KNb3O8) and titanium niobium oxide (KTiNbO5), which are layered wide band gap semiconductors. Generating hydrogen via direct water photolysis holds promise as a way to lower the cost of hydrogen gas production so it can be used as a renewable and clean alternative fuel. My group has demonstrated that layered semiconductor materials have the potential to enable the synthesis of new types of photocatalyst composites with customizable characteristics. In this work, …

Upcyclying Of Polyethylene Terephtalate By Addition Of Thermoplastic Elastomer, Diego Francisco Bermudez

Open Access Theses & Dissertations

Continual overconsumption of single-use plastics has generated challenges of solid waste management across the United States. Common plastic waste management solutions, such as landfill, have caused the migration of contaminants into the environment consequently affecting not only the health of wildlife, but also that of human beings. Alternative strategies for the handling of single-use plastic such as polyethylene terephthalate (PET), used in the food packaging industry, can ultimately help mitigate the noxious consequences of single-use plastics affecting entire ecosystems. This study demonstrates a potential avenue of materials upcycling by studying the effects of coupling PET with the thermoplastic elastomer styrene-ethylene-butylene-styrene …

Electrochemical Approaches To Life-Support Resources In Space Missions And Nuclear Technologies: Hydrogen Peroxide And Uranium Films, Armando Manuel Pena-Duarte

Open Access Theses & Dissertations

Space race has developed several technological advances that have achieved and continue to achieve the success of space missions in the aerospace timeline. Currently, the number of space technical and scientific innovations is still growing––demanding new materials and developments for extreme performing applications of fuel cells, batteries, supercapacitors, and systems of nuclear energy. Space missions require life-support solutions, auto-sustainable closed-loop living environments, cleaning and sanitizing solutions against pathogens, and safe nuclear-based resources of energy––with fissile materials with well-controlled dimensions within the core fuel elements. Likewise, to guarantee safety conditions, reduce costs, and facilitate operational logistics, space missions must reduce their …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Enhancing Compatibility And Mechanical Properties Of Natural Rubber Composites, Krisma Yessi Sianturi, Adam Febriyanto Nugraha, Belle Kristaura, Mochamad Chalid

Journal of Materials Exploration and Findings

Pure natural rubber (NR) exhibits low mechanical properties, necessitating the incorporation of additives like vulcanizing agents and fillers. Carbon black and silica, conventional fillers, are relatively expensive and not environmentally friendly. This study explores using Oil Palm Empty Fruit Bunch (OPEFB) fiber as an affordable, abundant, and biodegradable alternative filler for NR. However, compatibility issues arise between the nonpolar NR and the polar OPEFB fiber. A latex-starch hybrid coupling agent (CA (NR-St)) was added to the composite formulation to address this. NR, OPEFB fiber, and the coupling agent were mixed using an open roll mill with a 10 phr OPEFB …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Nano-Engineered Soft Magnets: Potential Application In Water Treatment, Hyperthermia And Molecular (Organic) Magnets, Yohannes Weldemariam Getahun

Open Access Theses & Dissertations

Scrutinizing the remarkable and tunable properties of magnetic materials at a nanoscale size "There's Plenty of Room at the Bottom..." Richard Feynman, this study attempts to find sustainable solutions to some of the deteriorating environmental, health, and energy problems the world is encountering. Due to their simple preparation, surface adaptability, and tunable magnetic and optical properties, magnetic nanoparticles have been extensively investigated in water treatment, cancer therapy, data storage, and more. However, relying on non-reusable and chemical-based treatment agents in water, complex and costly cancer treatment procedures and molecular magnets that operate far below room temperature limited those attempts from …

Design Of Multi-Principal Element Materials Using A Combination Of First-Principles Calculations And Machine Learning, Zhaohan Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Multiple-principal element materials, including alloys (MPEAs), oxides and other compounds combine several elements on a sub-lattice, which increases the configurational entropy and contributes to their thermodynamic stability. The vast combinatorial design space of multi-principal element materials gives rise to diverse microstructures and unprecedent combination of properties. It also poses a challenge—how to rapidly screen MPEAs with stability and properties for targeted applications. Furthermore, fundamental composition-structure-property relationships in MPEAs are currently missing. In this dissertation, I have used MPEAs as a representative system and investigated the role of chemical composition on their phase-stability and mechanical properties. With a combination of first-principles …

Rational Design Of Composite Nanomaterials For Water Treatment Applications, Mariana Marcos-Hernandez

Open Access Theses & Dissertations

Water quantity and quality have been affected in communities all around the world due to population growth, pollution, changes in land use, and climate change. In order to cope with existing and anticipated water demands and shortages, the use of treated or reclaimed water is an ongoing alternative that has helped communities all over the world address this problem. The adaptation of nanotechnology to traditional water and wastewater treatment processes offers new opportunities in technological developments. Unique size-dependent properties such as: high surface to mass ratio, high reactivity, high sorption capacities, fast dissolution, superparamagnetism, among others, provide high-tech efficient materials …

Rational Design Of Multifunctional Nanocatalysts For Environmental Remediation And Energy Conversion Technologies, Md Ariful Ahsan

Open Access Theses & Dissertations

The discovery of efficient and sustainable carbon-based nanotechnologies to solve both the scarcity of drinking water and global energy crisis has become a paramount task in the last decades. Owed to the fast population growth and industrialization of the modern society, access to potable water and clean energy technologies is becoming very hard around the globe. Water pollutants have become a serious threat to the environment and ecology because of their toxic nature. Parallelly, the current hydrocarbon-based fuel industries are generating high levels of contamination across the planet, making imperative the development of cleaner energy technologies. In this regard, the …

Synthesis, Characterization, And Direct-Ink-Writing Of Syntactic Foams, Andrea Irigoyen

Open Access Theses & Dissertations

This project encompasses three different methods to fabricate syntactic foams using a PDMS matrix i.e., hollow spheres inclusion, pore generator leaching by solvent, and emulsion. The foam formation by using polysiloxane hollow spheres is done in a 3-step process. The first step is to create a core of polystyrene following a dispersion polymerization process. The goal for the size of the pore is to monodisperse and have an average diameter of 5-10 μm, so the polystyrene core must be as well within that range. After that, the cores are coated with a polysiloxane shell by following a polymerization by condensation …

Molecular Dynamics Simulations Of Self-Assemblies In Nature And Nanotechnology, Phu Khanh Tang

Dissertations, Theses, and Capstone Projects

Nature usually divides complex systems into smaller building blocks specializing in a few tasks since one entity cannot achieve everything. Therefore, self-assembly is a robust tool exploited by Nature to build hierarchical systems that accomplish unique functions. The cell membrane distinguishes itself as an example of Nature’s self-assembly, defining and protecting the cell. By mimicking Nature’s designs using synthetically designed self-assemblies, researchers with advanced nanotechnological comprehension can manipulate these synthetic self-assemblies to improve many aspects of modern medicine and materials science. Understanding the competing underlying molecular interactions in self-assembly is always of interest to the academic scientific community and industry. …

Magnesiothermic Combustion Synthesis Of Nanocrystalline Silicon And Oxidation Kinetics Of Magnesium Particles, Sergio Cordova

Open Access Theses & Dissertations

Magnesium (Mg) is a well-known reduction agent in metallurgy (more specifically, in metallothermy). Recently, magnesiothermic reduction of oxides has been used in self-propagating high-temperature synThesis (SHS) of advanced materials such as ultrahigh-temperature ceramics (UHTC). The magnesiothermic SHS has also been used for the conversion of silica (SiO2) to silicon-based materials for thermoelectric applications. However, since oxidation of Mg releases a lot of heat, the direct use of it as the reduction agent leads to excessively high temperatures and undesirable sintering of the products. We have proposed to use magnesium silicide (Mg2Si) instead of Mg in the SHS of nanostructured silicon. …

Phase-Field Modeling Of The Polymer Membrane Formation Process For Micro- And Ultra-Filtration, Michael Rosario Cervellere

Graduate Theses and Dissertations

Porous polymer membrane filters are widely used in separation and filtration process. Micro- and ultra-filtration membranes are commonly used in biopharmaceutical applications such as filtering viruses and separating proteins from a carrier solution. The formation of these membrane filters via phase inversion is a complex and interconnected process where varying casting conditions can have a wide variety of effects on the final membrane morphol- ogy. Tailoring membrane filters for specific performance characteristics is a tedious and time consuming process. The time and length scales of membrane formation make it extremely difficult to experimentally observe membrane formation. Modeling the membrane formation …

Electrochemical Deposition In Energy Storage Devices, Witness Atutala Martin

Graduate Theses and Dissertations

Metals, whether in a solid or soluble ion form, are a vital part of any electrochemical storage system. More so, Li metal is widely considered as the ideal anode because of its low density and low electrochemical potential (-3.04 V vs. the standard hydrogen electrode – SHE). However, just like most metals, it does not plate or strip evenly during cycling which can lead to cycling performance issues, short cycling lifespans, and even safety concerns brought about by dendrites that can cause internal short-circuiting within cells. This research focused on investigating the electroplating of metals in both aqueous and non-aqueous …

Aerosol Vapor Synthesis Of Organic Processable Pedot Particles And Measuring Electric Conductivity Using A 3d Printed Probe Station, Yang Lu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Conducting polymers are organic semiconductors characterized by conjugated backbones (alternating single-double bonds) that enable mixed ionic-electronic conductivity. Their polymeric nature, tunable band structure and reversible redox capability have demonstrated fundamental advances in the fields ranging from electrochemical energy storage, sensing, to electro/photo catalysis and neuromorphic engineering. Conjugated backbones, the origin of all the unique physical and chemical properties associated with conducting polymers, prevent their solubility due to high lattice energy which hinders processing. Current solution utilizes a long-chain polymer (PSS) as dopants to render conducting polymer water dispersible (PEDOT:PSS). Nonetheless, PSS is highly acidic and hydrophilic limiting applicability with acid-incompatible …

Synthesis And Characterization Of Functiona Materials For 3d Printed Composites, Elizabeth Irene Reza

Open Access Theses & Dissertations

The following body of work encompasses the synThesis, upscaling, additive manufacturing, and characterization of microspheres as functional fillers incorporated into polymer syntactic foams. Synthesizing microspheres permits control over morphology, dispersion of particles, and size while the use of direct write manufacturing allowed for the controllability of filler orientation. Two different syntactic foams were developed from similar methodologies: (1) a silicone syntactic foam (2) epoxy syntactic foam. The silicone epoxy foam showed an increasing in damping and elastic modulus. The epoxy syntactic foams showed an enhanced thermal and electrical properties.

Investigation Of Iron Doped Gallium Oxide (Ga-Fe-O) System: Structure Property Relationship And Performance Evaluation For Optical And Catalytic Applications, Swadipta Roy

Open Access Theses & Dissertations

From September 2012 to May 2015, a phenocam monitored the seaward edge of a protected mangrove forest. Calculated GCC revealed seasonal greening patterns of a mangrove species, Rhizophoa apiculata, and an overall increase in the GCC, suggesting mangrove expansion. In comparing temperature and precipitation effects, it was found that this particular mangrove species had a greening optima at temperatures between 28°C and 28.5°C, and greening and canopy development response lag time of 10 weeks in response to precipitation. Tree saplings were monitored and showed to grow by 50%, mostly during a three month period during the rainy season. The establishment …

Defect Chemistry And Ion Intercalation During The Growth And Solid-State Transformation Of Metal Halide Nanocrystals, Bo Yin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Abstract of the Dissertation

Defect Chemistry and Ion Intercalation During the Growth and Solid-State Transformation of Metal Halide Nanocrystals

Semiconductor metal halides as light-sensitive materials have applications in multiple areas, such as photographic film, antibacterial agents and photocatalysts. One focus of this dissertation is to achieve novel morphologies of ternary silver bromoiodide (AgBr1-xIx, 0

For the silver halide system, we demonstrate that the anion composition of AgBr1-xIx nanocrystals determines their shape through the introduction of twin defects as the nanocrystals are made more iodide-rich. AgBr1-xIx nanocrystals grow as single-phase, solid solutions with the rock salt crystal structure for anions compositions …

Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study, Hasan Rejoanur Rahman

Open Access Theses & Dissertations

Asphaltenes are a group of planar molecules found in crude oil and are prone to aggregation which often causes blockage of pipes along the oil production stream resulting a huge economic downside. In an effort to understand the hierarchical organization of asphaltene in different solvents and concentrations, the solution structure of various asphaltene solutions were studied using small-angle x-ray scattering (SAXS). Solvents were chosen based on miscibility maps. Such maps are generated on the critical value of the solubility parameter difference between asphaltenes or asphaltene components, and a range of solvents. The critical factors that affect asphaltene and asphaltene component …

Methods For Producing Graphene From Petroleum By-Products, Eva M. Deemer

Open Access Theses & Dissertations

N/A

Improving The Engineering Properties Of Pla For 3d Printing And Beyond, Carmen R. Rocha

Open Access Theses & Dissertations

Additive manufacturing (AM), now more commonly known as 3D printing, has been classified as efficient, fast, and practical in the prototyping sector of product development. In the work presented here, we will use one of the AM techniques known as Material extrusion 3D printing (ME3DP), which has all the advantages of AM. However, one of the biggest challenges facing ME3DP technologies is the limitation of the range of materials used by this technique. Acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) are currently the most common thermoplastics materials used in ME3DP because of their ability to melt and be reprocessed. …

Effect Of Surface Omniphobicity On Drying By Forced Convection, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Low energy surfaces can strongly repel both oil and water. Recently these surfaces have been fabricated on various substrates including fabric, aluminum, stainless steel and many other materials. In this experiment we explore the use of low energy surface deposition on aluminum alloy, stainless steel and silicon substrates, to enhance the drying rate of liquids removed from the surface by forced convection. We control surface roughness by substrate abrasion and by the growth of Al₂O₃ nanograss to enhance liquid repellence by use of a hierarchical texture. Liquid repellence of the substrates is measured by contact angles of …

Highly-Selective Chemiresistive Sensing And Analysis Of Vapors Using Functionalized Nanotubes, Deon Hines

Dissertations, Theses, and Capstone Projects

Specifically, the project involves the development of a diversified array of nanostructured gas-sensors comprised of selectively, novel surface-functionalized carbon nanotubes (for analyte selectivity by virtue of functionality). Harnessing carbon nanotubes with various electron withdrawing and donating groups help in determining their affinity toward certain prognostic gaseous markers thus increasing specificity of such created sensors. We have devised synthetic routes that have led to the facile production of covalently polyfunctionalized nanotubes in high yield. Seven carbon nanotube analogues were systematically considered and then chemically synthesized, from pristine single-walled nanotubes (SWNT's), for use as the main component of sensory units that was …