Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

2026

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 91 - 120 of 189

Full-Text Articles in Engineering Science and Materials

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak Mar 2026

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak

Journal of Sustainable Construction Materials and Technologies

This study investigates the physical, mechanical and thermal properties of hemp-based composites produced with traditional binders such as lime, cement, gypsum, clay, and water-based glue. Hemp fractions of different sizes (splinter, shiv, fiber and powder) were combined with these binders to manufacture cube and plate specimens, which were tested for physical, mechanical, thermal, and temperature resistance properties. The study aims to compare the mechanical, physical, thermal, and fire behaviour of these composites to assess their suitability for sustainable construction applications. The hemp-based composites were tested for unit weight, water absorption, compressive strength and thermal conductivity. Most specimens are lightweight (<1000 kg/m3), and exhibit good thermal insulation performance and high compressive deformability, making them suitable for seismic-prone regions. The glue-based composite had the lowest unit weight, measured as 330 kg/m3. Thermal conductivity ranged from 0.051 to 0.243 W/m· K, with several mixtures performing better than natural pumice. While cement-based composites showed the highest compressive strength, ranging from 5.5 to 24.8 kg/cm2, natural hydraulic lime is the lowest. Water absorption was high, and moisture release occurred slowly across all hemp fractions. Combustion tests indicated that hemp-based materials have moderate temperature resistance, with charring temperatures ranging from 238–265°C for raw hemp and 300–385°C when mixed with binders. Overall, hemp-based composites are lightweight, eco-friendly, and suitable for non-load-bearing construction and insulation applications. However, improvements in moisture resistance and long-term durability are necessary to enhance their practical applicability.

Go to article

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar Mar 2026

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar

Journal of Sustainable Construction Materials and Technologies

This study explores the development, characterization, and performance of sustainable cow dung bricks using locally sourced organic (cow dung) and mineral (clay, quartz sand, feldspar, lime) constituents for non-load-bearing masonry in India. Three blends with varying cow dung content (70%, 75%, 80%) were mixed, molded, air dried, and cured without kiln firing to reduce environmental impact. The bricks' mechanical properties—compressive strength, water absorption, bulk density, flexural strength, shore hardness, and modulus of elasticity—were systematically evaluated with complete statistical documentation (n = 6 replicates per formulation per test age). Microstructural features were investigated using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray …

Go to article

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim Mar 2026

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim

Journal of Sustainable Construction Materials and Technologies

New building materials that required and produced less energy are need of today's infrastructure development. The ability of such building materials to promote sustainable development always puts its demand in active mode. With huge consumption of naturally occurring materials in building construction, the problem related to environment degradation is now common for world. Along with this, world is also facing the problem of reuse, recover and scientifically approved disposal of non-biodegradable wastes. Blast furnace slag (BFS) is one of those steel industry wastes that are abundantly available and their disposal arises as prime challenge for industries. This research work makes …

Go to article

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg Mar 2026

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg

LSU Master's Theses

Autonomous Underwater Vehicles (AUVs) are untethered robotic platforms used for tasks such as seafloor mapping, infrastructure inspection, and environmental monitoring. Recent technological advances have produced smaller, more affordable platforms, broadening access to research teams and small companies alike. This miniaturization comes at the cost of them handling drawbacks associated with a more compact machine such as reduced battery capacity as well as limited processing and sensing capabilities. These constraints make small-sized marine vehicle’s reliability critical as they can cause malfunctions, making the loss of a vehicle more likely. Actuator faults are particularly consequential as unintended and unstable control in an …

Go to article

Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih Mar 2026

Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih

Journal of Sustainable Construction Materials and Technologies

The global construction sector is increasingly challenged to balance environmental sustainability with the growing demand for durable, high-performance materials. As cement production continues to be a major source of anthropogenic CO2 emissions, the incorporation of alternative, low-impact binders has become a key strategy for reducing the environmental footprint of concrete. In this context, glass powder (GP)—a finely ground industrial by-product rich in amorphous silica—has emerged as a promising partial replacement for Portland cement. Its pozzolanic reactivity contributes to improved hydration and matrix densification, while its use also supports circular economy principles by diverting waste glass from landfills. At the same …

Go to article

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas Mar 2026

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Go to article

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu Feb 2026

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO2+/VO2+ and V2+/V3+ couples. One of the major challenges for VRFBs is the slow charge transfer in VO2+/VO2+ and V2+/V3+ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …

Go to article

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii Feb 2026

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii

Journal of Electrochemistry

Anodic aluminium oxide (AAO) porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light, and high thermal stability up to 1500 °C. These porous films are prepared by aluminium anodizing at high voltages in weak acids, leading to a slow kinetics of initial stages of porous structure formation. Here, we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid. Aluminium foils, pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer, were …

Go to article

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun Feb 2026

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun

Journal of Electrochemistry

Redistribution Layer (RDL), composed of layered dielectrics and electroplated copper materials, is a basic structure to rearrange numerous I/O pads on the chip surface in wafer-level advanced packaging. As the key chemicals in electrolyte baths, electroplating additives have undergone continuous development to meet the industrial needs for high-speed and fine-line/fine-pitch applications. Meanwhile, the intricate relationships between additive chemical structures and electroplated copper properties are yet to be well understood. In this work, a pair of triphenylmethane-based dye molecules, i.e., gentian violet (GV) and methyl green (MG), was comparatively investigated as levelers for high-speed RDL copper electroplating. Compared to GV, significantly …

Go to article

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour Feb 2026

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour

Journal of Sustainable Construction Materials and Technologies

Thermal insulation materials play a significant role in balancing buildings' total carbon emissions. Balancing involves applying the optimized amount of insulation materials to avoid excessive emissions in either the operational or embodied phases. Due to the wide range of insulation materials and variations of their specifications, it is vital to analyse them individually. The focus of this study is to optimize the amount of insulation materials in the facades of Residential Buildings (RB) to balance the amount of Operational Carbon Emissions (OCE) and Embodied Carbon Emissions (ECE) by applying the Building Information Modelling-Life Cycle Assessment (BIM-LCA) integration method. The Life …

Go to article

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib Feb 2026

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib

Journal of Sustainable Construction Materials and Technologies

Integrating sustainable material procurement with construction waste management is essential to reduce construction and demolition waste in Libya, where current practices remain largely reactive and disposal-oriented. This narrative review aims to develop a conceptual framework linking procurement decisions to waste-generation pathways in Libyan construction projects, clarifying how proactive, sustainability-driven purchasing can serve as a primary driver of waste prevention. Using a PRISMA-guided systematic search of Web of Science, Scopus, and IEEE Xplore for 2001–2026, and a bibliometric analysis via VOSviewer, 956 high-quality studies were synthesized to map global knowledge and to expose the paucity of integrated SMP–CWM studies in developing …

Go to article

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan Feb 2026

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan

Journal of Sustainable Construction Materials and Technologies

This study investigates the potential of limestone calcined clay cement (LC3) as a sustainable binder for developing a single-layer composite material incorporating barite and rubber aggregates, hypothesized to achieve enhanced sound insulation performance compared to conventional multi-layered wall systems. Mortars were prepared using LC3 with 55% clinker, 30% metakaolin, 15% limestone, substituting 45% of cement clinker. Hybrid mixtures of barite and rubber aggregates (barite-to-rubber volume ratios of 2:1 and 1:2) were tested at aggregate-to-binder ratios of 2.0, 2.75, and 3.5 to evaluate their combined mass and damping effects on acoustic performance. Experiments were conducted to determine physical, mechanical, and acoustic …

Go to article

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh Feb 2026

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh

Journal of Sustainable Construction Materials and Technologies

Soil stabilization remains a critical challenge in geotechnical engineering, particularly for weak and expansive soils that compromise the safety and serviceability of infrastructure. Traditional stabilizers such as lime and cement have been widely applied; however, their limitations in terms of long-term durability, carbon footprint, and performance under aggressive environmental conditions necessitate alternative approaches. In recent years, geopolymer-based stabilizers derived from industrial by-products such as fly ash (FA), slag, and bottom ash (BA) have emerged as promising substitutes. This review critically examines the comparative performance of lime and geopolymer stabilization with respect to strength development, durability, compressibility, environmental impact, and economic …

Go to article

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P Feb 2026

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P

Journal of Sustainable Construction Materials and Technologies

This study addresses the unresolved gap in quantifying how recycled fine aggregates (RFA) and metakaolin (MK) interact synergistically in self-compacting concrete (SCC), a relationship that previous works have studied only in isolation or without mechanistic justification. Twenty-five SCC mixtures containing MK (0–25%) and RFA (0–100%) were evaluated to generate a unified understanding of fresh behaviour, strength development, pore refinement, interfacial transition zone (ITZ) characteristics, and sustainability indicators. Results show that RFA alone increases water demand and reduces strength, while MK compensates for these losses by densifying the matrix and improving ITZ bonding, as confirmed through SEM analysis. An optimum synergy …

Go to article

Mae Enewsbrief Oct-Dec 2025, Department Of Mechanical And Aerospace Engineering, Michigan Technological University Feb 2026

Mae Enewsbrief Oct-Dec 2025, Department Of Mechanical And Aerospace Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Go to article

Green Roofs For Grey Water Treatment – Comparative Study Of Economic And Environmental Impacts, Shaden S. Attia Feb 2026

Green Roofs For Grey Water Treatment – Comparative Study Of Economic And Environmental Impacts, Shaden S. Attia

Theses and Dissertations

Cities are under more pressure than ever to use sustainable methods for managing water and other resources because of urbanization, climate change, and a lack of water. Standard greywater treatment systems (SGTSs) work well, but they use a lot of resources and don't provide a lot of ecosystem services. Greywater-treating green roofs (GTGRs) have emerged as a promising Nature-Based Solution (NBS), combining wastewater recycling with benefits like regulating temperature, reducing greenhouse gas (GHG) emissions, and reducing the urban heat island (UHI) effect. Even with this potential, there is still not enough real-world research on how GTGRs affect both the economy …

Go to article

Sustainable Construction Materials In The Middle East: Model Development For Materials Selection, Taha Ahmed Omar Madu Feb 2026

Sustainable Construction Materials In The Middle East: Model Development For Materials Selection, Taha Ahmed Omar Madu

Theses and Dissertations

The construction industry, a major driver of economic development in the Middle East, is simultaneously a leading contributor to carbon emissions, resource depletion, and environmental degradation. Amid rapid urbanization in countries such as Egypt, Saudi Arabia, and the United Arab Emirates, the adoption of sustainable construction materials has emerged as a critical strategy for mitigating environmental and societal impacts while advancing regional development objectives. This thesis is organized along two interrelated directions: first, it delivers a comprehensive assessment of the current adoption, challenges, and opportunities associated with the use of sustainable construction materials across the three target countries; second, it …

Go to article

Mycelium-Based Composites Using Minimally Processed Industrial Hemp Biomass: Impact Of Species And Feedstock Ratio On Mechanical Performance Compared To Polystyrene Packaging, Radika Bhaskar, Tanisha Rutledge, Kevin Trangone, Oneal Latimore Feb 2026

Mycelium-Based Composites Using Minimally Processed Industrial Hemp Biomass: Impact Of Species And Feedstock Ratio On Mechanical Performance Compared To Polystyrene Packaging, Radika Bhaskar, Tanisha Rutledge, Kevin Trangone, Oneal Latimore

School of Design and Engineering Papers

Mycelium-based composites (MBCs\) are formed from lignocellulosic substrates and biopolymer matrices derived from fungal mycelium. Due to their low fossil energy demand and biodegradability, MBCs represent a versatile and sustainable material suitable for a range of applications, with increasing interest focused on packaging. Hemp fibers are an example of natural fibers with great promise as a substrate to improve the mechanical properties of MBCs. However, the separation of bast and hurd fiber requires processing and commercial-scale facilities that are logistically challenging and may be cost-prohibitive. Here, the potential for minimally processed hemp, with no separation of fibers, is evaluated for …

Go to article

Mechanical Characterization And Modeling Of Rat Myocardia Under The Influence Of Epirubicin, Abdallah Mahmoud Alkhaiyat Jan 2026

Mechanical Characterization And Modeling Of Rat Myocardia Under The Influence Of Epirubicin, Abdallah Mahmoud Alkhaiyat

Theses and Dissertations

Cancer remains a predominant health challenge that is responsible for a significant portion of global morbidity and mortality. Epirubicin (EPI), a chemotherapeutic anti-cancer drug, has shown remarkable efficacy in combating various malignancies. However, it is known to have undesirable side effects on the heart, collectively referred to as cardiotoxicity. This research investigates the adverse effects of chemotherapy on cardiac contractility through an in vitro examination of the mechanics of healthy and infarcted animal heart tissues. Electrically stimulated slices of rat ventricular tissue were tested using an isometric force measurement tissue bath. The tissue slices were subjected to uniaxial stretching, allowing …

Go to article

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar Jan 2026

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Go to article

Iron-Involved Orr Electrocatalysts Under The Lens Of In-Situ/Operando Mössbauer Spectroscopy, Sumbal Farid, Jun-Hu Wang Jan 2026

Iron-Involved Orr Electrocatalysts Under The Lens Of In-Situ/Operando Mössbauer Spectroscopy, Sumbal Farid, Jun-Hu Wang

Journal of Electrochemistry

Exploring cost-effective and efficient catalysts for oxygen reduction reaction (ORR) poses a significant challenge, especially in the pursuit of alternatives to precious metals like platinum. Significant advancements have driven electrochemists to develop efficient ORR catalysts using abundant materials, particularly iron (Fe)-based, known for their exceptional performance in ORR. While the crucial function of Fe in boosting ORR catalytic activity is recognized, the connection between material attributes and catalytic performance remains enigmatic. Understanding the dynamic processes involved in oxygen electrocatalysis is paramount for designing precious-metals-free ORR electrocatalysts. Mössbauer spectroscopy stands out as a powerful technique for deciphering the structural characteristics of …

Go to article

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao Jan 2026

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao

Journal of Electrochemistry

Aqueous sodium-ion batteries (ASIBs) have attracted great attention in aqueous batteries due to their merit of high safety. However, the constrained work potential and insufficient chemical stability of anode materials in aqueous electrolytes hinder the large-scale application of ASIBs. Sodium titanium phosphate, NaTi2(PO4)3 (NTP), is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure. Recently, great achievements have been made in the development of NTP, however, a comprehensive review of existing studies is still lacking. This article firstly introduces the basic properties of NTP and …

Go to article

Development Status And Existing Problems Of Ion-Solvation Membranes For Electrolysis Of Water, Zheng-Yuan Zhou, Yu-Tao Sun, Zheng-Bang Liu, Chuan-Zheng Wang, Yong-Nan Zhou, Xi Luo, Tian-Chi Zhou, Jin-Li Qiao Jan 2026

Development Status And Existing Problems Of Ion-Solvation Membranes For Electrolysis Of Water, Zheng-Yuan Zhou, Yu-Tao Sun, Zheng-Bang Liu, Chuan-Zheng Wang, Yong-Nan Zhou, Xi Luo, Tian-Chi Zhou, Jin-Li Qiao

Journal of Electrochemistry

Ion-solvaing membranes (ISMs) have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices. This article provides an overview of structural composition, performance advantages, research progress, ion conduction mechanism and existing issues of ISMs, primarily classifying them according to the matrix structure. A detailed analysis of performance enhancement methods, key performance indicators of ISMs and performance influencing factors is also presented. The article contributes to further optimizing the design and application of ion-solvation membranes, providing theoretical support for the development of fields such as hydrogen production through electrolysis of water and electrochemical energy …

Go to article

Carbon Supported Octahedral Ptni Nanoparticles (Oct-Ptni/C) As A Cathode Catalyst For Proton Exchange Membrane Fuel Cells (Pemfcs) With Improved Activity And Durability, Zi-Wei Feng, Hai-Zhong Chen, Xiao Duan, Ling Tang, Yun-Kun Zhao, Long Huang Jan 2026

Carbon Supported Octahedral Ptni Nanoparticles (Oct-Ptni/C) As A Cathode Catalyst For Proton Exchange Membrane Fuel Cells (Pemfcs) With Improved Activity And Durability, Zi-Wei Feng, Hai-Zhong Chen, Xiao Duan, Ling Tang, Yun-Kun Zhao, Long Huang

Journal of Electrochemistry

Proton exchange membrane fuel cells (PEMFCs) are considered as a promising renewable power source. However, the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction (ORR) kinetics even on state-of-the-art Pt catalyst. Octahedral PtNi nanoparticles (oct-PtNi NPs) with excellent ORR activity in a half-cell have been widely studied, while their performance in membrane electrode assembly (MEA) has much less reported. Herein, we investigated the MEA performance using the carbon supported oct-PtNi NPs (oct-PtNi/C) as the cathode catalyst. Under the mild acid washing condition, the surface …

Go to article

Assessing The Influence Of Land Use Land Cover Alterations On Climate Variability In Thimphu & Chhukha, Sonam Zangpo, Karma Choki, Tashi Tobgay, Phurpa Rinchen, Tandin Tshewang Jan 2026

Assessing The Influence Of Land Use Land Cover Alterations On Climate Variability In Thimphu & Chhukha, Sonam Zangpo, Karma Choki, Tashi Tobgay, Phurpa Rinchen, Tandin Tshewang

ASEAN Journal on Science and Technology for Development

This study examines the spatiotemporal dynamics of land use and land cover (LULC) changes and their influence on local climate variability in Bhutan using an integrated geospatial and machine learning framework. LULC changes during the period 2004 to 2022 were analyzed to understand their relationship with localized climate responses. Despite increasing urbanization pressures, comprehensive assessments linking LULC dynamics with climate variability in Bhutan remain limited. Geographic Information System (GIS) techniques and Random Forest classification were used to map LULC changes, while non-parametric trend analyses (Mann–Kendall test and Sen’s slope estimator) were applied to evaluate trends in key meteorological variables, including …

Go to article

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts Jan 2026

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study investigates the effect of vibration-induced loose connections on signal reflection (S11) for loose connection identification in aerospace coaxial cables using distributed sensing approach, which is effective in filtering the noise and identifying minor discontinuities. In this approach, a sliding gated window is applied to S11 signal, a fast Fourier transform is performed over the gated windows, cross-correlation is computed between the baseline and vibration-affected signals, and the standard deviation is mapped along the cable length. Sinewave signals from 9 kHz to 5 GHz were swept through cables with vibrating connectors under three conditions: fully tightened, loosened by 180°, …

Go to article

Development Of Stronger, More Extrudable 6xxx Series Alloys For Automotive Applications, Eli A. Harma Jan 2026

Development Of Stronger, More Extrudable 6xxx Series Alloys For Automotive Applications, Eli A. Harma

Dissertations, Master's Theses and Master's Reports

6xxx alloys are widely used in automotive extrusion structures for their high specific strength and formability. Advanced designs require greater formability and strength, creating an opportunity for high-strength, formable alloys. The 6xxx series forms β”-Mg5Si6 precipitates during age hardening and develops a fibrous microstructure during extrusion, both strengthening the alloy. Increasing Mg and Si to form more β” decreases formability. Thus, modifying texture can increase strength without reducing formability. Current alloys like 6005A add Mn and Cr to form dispersoids that inhibit recrystallization and promote strengthening textures; however, high Mn and Cr concentrations reduce formability. Replacing Mn …

Go to article

Effects Of Gum Additives On Nickel Electroplating For Enhancing Steel Corrosion Resistance, Supitcha Supansomboon, Manatsawee Maneekan, Chanyanut Saenthaweesuk, Duangta Sitthichokcharoen, Natthapong Phinichka Jan 2026

Effects Of Gum Additives On Nickel Electroplating For Enhancing Steel Corrosion Resistance, Supitcha Supansomboon, Manatsawee Maneekan, Chanyanut Saenthaweesuk, Duangta Sitthichokcharoen, Natthapong Phinichka

Journal of Metals, Materials and Minerals

Low-carbon steels are widely used across various industries but have limited corrosion resistance, leading to safety hazards and a shortened service life. Nickel plating is a common method for enhancing steel corrosion resistance. The plating bath solution can be modified by adding additives to improve the properties of the coating. In this research, gum arabic, guar gum and gelatin were used as additives in a nickel electroplating bath. SS400 low-carbon steel, as a substrate, was plated with nickel from these different baths at 5 V for 25 min. Nickel coated with green additives showed higher hardness compared to those without …

Go to article

Synergy Of Ground Granulated Blast-Furnace Slag And Limestone Powder In Ternary Cement: Effects On Heat Of Hydration And Strength Development, Pailyn Thongsanitgarn, Watcharapong Wongkeo, Thanongsak Nochaiya, Arnon Chaipanich Jan 2026

Synergy Of Ground Granulated Blast-Furnace Slag And Limestone Powder In Ternary Cement: Effects On Heat Of Hydration And Strength Development, Pailyn Thongsanitgarn, Watcharapong Wongkeo, Thanongsak Nochaiya, Arnon Chaipanich

Journal of Metals, Materials and Minerals

This study explores the synergistic effect of ground granulated blast-furnace slag (GGBS) and limestone powder (LS) on the hydration behavior and mechanical performance of ternary cement systems. Calorimetry revealed that 30GGBS mix showed a significantly lower peak of about 2.3 mW∙g‒1 and a delayed response. In contrast, the incorporation of LS enhanced early hydration, with the 30LS mix reaching a peak of approximately 2.8 mW∙g‒1 around 6 h. Among ternary blends, 15GGBS–15LS exhibited the highest and earliest heat flow peak (about 2.55 mW∙g‒1 around 7.5 h), while 25GGBS–5LS showed a slower response (about 2.45 mW∙g‒1 around 9.5 h). Despite differences …

Go to article

Degradation Of Wastewater By Advanced Oxidation Processes Using Green Synthesised Cuo Nanoparticles, Srinivasan Vishal, Anand Sarvesvaron, Muralidharan Keerthana, Hemanth Sanjay Reddy, A Babu Ponnusami Jan 2026

Degradation Of Wastewater By Advanced Oxidation Processes Using Green Synthesised Cuo Nanoparticles, Srinivasan Vishal, Anand Sarvesvaron, Muralidharan Keerthana, Hemanth Sanjay Reddy, A Babu Ponnusami

Journal of Metals, Materials and Minerals

This study highlights the green synthesis of CuO nanoparticles using coconut coir extract and evaluates their photocatalytic performance in the degradation of the Brown G dye. The CuO nano-particles were synthesised through sol-gel method, and the biomolecules like polyphenols, tannins and flavonoids acted as reducing agents to stabilise the nanoparticles. The characterisation of these nanoparticles was carried out through XRD, FTIR and FESEM methods. The nanoparticles were used to degrade the dye Brown G under UV irradiation.  Response surface methodology was used to optimise the operating parameter with Box-Behnken design, which is the most suitable for varying 3 or more …

Go to article

First Prev Next Last