Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

2025

Discipline
Institution
Keyword
Publication
Publication Type

Articles 271 - 300 of 322

Full-Text Articles in Engineering Science and Materials

The Effects Of Graphene Nanoplatelets And Microcrystalline Cellulose On The Mechanical Properties Of Fiberglass And Carbon Fiber Composites, Duangjai Srisamut, Nathawat Poopakdee, Warut Thammawichai Jan 2025

The Effects Of Graphene Nanoplatelets And Microcrystalline Cellulose On The Mechanical Properties Of Fiberglass And Carbon Fiber Composites, Duangjai Srisamut, Nathawat Poopakdee, Warut Thammawichai

Journal of Metals, Materials and Minerals

This study investigated how graphene nanoplatelets (GNP) and microcrystalline cellulose (MCC) affect the mechanical properties of epoxy (EP), carbon fiber (CF), and fiberglass (FG) composites. The tensile and flexural properties of GNP-EP and MCC-EP of  varying reinforcement concentrations were examined. Results indicated significant improvements on tensile and flexural properties by GNP and MCC. At 0.1 wt% GNP, tensile and flexural strengths increased by 10% and 21%, while 2.0 wt% improved flexural modulus by 65%. Similarly, 2.0 wt% MCC improved tensile strength, modulus, and flexural modulus by 11%, 11%, and 46%, respectively, and a 26% increase in flexural strength at 1.0 …

Go to article

Synthesis Temperature-Driven Enhancements In Bioi Photocatalysis: A Hydrothermal Approach, Sorawit Thueanbangyang, Kittiyaporn Singsumphan, Varunya Atimayulerd, Chutima Nakmuk, Cheewita Suwanchawalit, Montri Aiempanakit Jan 2025

Synthesis Temperature-Driven Enhancements In Bioi Photocatalysis: A Hydrothermal Approach, Sorawit Thueanbangyang, Kittiyaporn Singsumphan, Varunya Atimayulerd, Chutima Nakmuk, Cheewita Suwanchawalit, Montri Aiempanakit

Journal of Metals, Materials and Minerals

Bismuth oxyiodide (BiOI) is a promising photocatalyst for visible-light-driven environmental remediation. However, its photocatalytic efficiency is highly dependent on synthesis conditions, particularly hydrothermal temperature, which governs its structural, optical, and electronic properties. In this study, BiOI was synthesized via a hydrothermal method at temperatures of 120℃, 150℃, 180℃, and 210℃ to investigate the effect of temperature on its photocatalytic performance systematically. Comprehensive characterizations, including X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, photoluminescence and photocatalytic degradation studies, were conducted to analyze crystallinity, morphology, band structure and charge transfer properties. The results …

Go to article

Bagasse Lignin For Single-Used Food Packaging Applications: Uv-Barrier, Antioxidant, Migration And Cytotoxicity, Pawarisa Wijaranakul, Bongkot Hararak, Wanwitoo Wanmoolee, Prapudsorn Wannid, Weerawan Laosiripojana Jan 2025

Bagasse Lignin For Single-Used Food Packaging Applications: Uv-Barrier, Antioxidant, Migration And Cytotoxicity, Pawarisa Wijaranakul, Bongkot Hararak, Wanwitoo Wanmoolee, Prapudsorn Wannid, Weerawan Laosiripojana

Journal of Metals, Materials and Minerals

This study examined PLA biocomposite films made from organosolv lignin extracted from Thai agro-waste, specifically sugarcane bagasse (BG), to assess their suitability for food packaging, focusing on their physical, thermal, optical, UV-shielding, antioxidant, and migration properties. Extracted BG-lignin exhibited free radical scavenging ability with an EC50 value of 400 µg/ml, reducing DPPH absorbance by 50%. PLA composite films with BG-lignin dosage from 0.1 to 1.0 wt.% were successfully fabricated via conventional blown film extrusion. Addition of BG-lignin at 0.5 wt.% and 1.0 wt.% to PLA films decreased UV transmittance from 90% to 30% and 12%, respectively, without compromising optical clarity. …

Go to article

Coating Of Zinc Substrates With Fluorosilane Molecules Using A Water-Treatment Technique As A Pre-Coating Procedure For The Creation Of Superhydrophobic Surfaces, Renz Ronald R. Prieto, Marvin U. Herrera Jan 2025

Coating Of Zinc Substrates With Fluorosilane Molecules Using A Water-Treatment Technique As A Pre-Coating Procedure For The Creation Of Superhydrophobic Surfaces, Renz Ronald R. Prieto, Marvin U. Herrera

Journal of Metals, Materials and Minerals

Superhydrophobic surfaces were successfully created when zinc substrates were coated with molecules with low surface energy through grafting of fluorosilane molecules. The zinc substrate underwent water-treatment technique as a pre-coating procedure to enhance the reaction sites for the grafting of fluorosilane molecules. The water contact angle of the samples went as high as 161.1° ± 0.8°. At lower fluorosilane-ethanol soaking times, water contact angles have lower values while at higher soaking time, it has higher water contact angle values. At 240 min fluorosilane-ethanol soaking time, optimum value of water contact angle was achieved. Fluorosilane molecules are widely distributed through the …

Go to article

Sulfur-Doped Carbon Dots Derived From Caffeine: A Highly Efficient Photocatalyst For Organic Dye Degradation, Ganyaporn Wongwaen, Koranut Dechsri, Praneet Opanasopit, Montri Aiempanakit, Cheewita Suwanchawalit Jan 2025

Sulfur-Doped Carbon Dots Derived From Caffeine: A Highly Efficient Photocatalyst For Organic Dye Degradation, Ganyaporn Wongwaen, Koranut Dechsri, Praneet Opanasopit, Montri Aiempanakit, Cheewita Suwanchawalit

Journal of Metals, Materials and Minerals

Sulfur-doped carbon dots (S-doped CDs) were synthesized via a solvothermal method using caffeine as a carbon precursor and sodium sulfide as a sulfur source. Characterization using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet -visible (UV-Vis) spectroscopy, and photoluminescence spectroscopy (PL) confirmed successful sulfur incorporation. TEM revealed a uniform size distribution and graphitic structures, while UV-Vis analysis showed a reduction in the bandgap from 3.29 eV to 3.10 eV, improving light absorption and charge carrier separation. The photocatalytic activity of S-doped CDs was evaluated for indigo carmine (IC) dye degradation under UV irradiation, where 2S-CDs …

Go to article

Impacts Of Calcination Temperature On The Crystallography, Granulometry And Impedance Of Licomno4, Chee Wayne Tan, Zul Hilmi Che Daud, Zainab Asus, Mohd Hasbullah Idris, Izhari Izmi Mazali, Mohd Kameil Abdul Hamid Jan 2025

Impacts Of Calcination Temperature On The Crystallography, Granulometry And Impedance Of Licomno4, Chee Wayne Tan, Zul Hilmi Che Daud, Zainab Asus, Mohd Hasbullah Idris, Izhari Izmi Mazali, Mohd Kameil Abdul Hamid

Journal of Metals, Materials and Minerals

Spinel structured lithium cobalt manganese oxide (LiCoMnO4) which exhibit reduction potential surpassing 5.0 V (vs. Li0 | Li+) was identified to be one of the prospective cathode candidates for next generation lithium-ion electrochemical systems. This article highlights the significance of calcination temperature on the crystallography of the resultant electroceramic compound as well as the corresponding response on the granulometry and impedance of LiCoMnO4. LiCoMnO4 compounds synthesised via sol-gel reaction in the first instance were converted into xerogel and subsequently subjected to facile one-step calcination protocol. Crystallography of the post-calcinated compounds were characterised via powder x-ray diffraction (XRD) technique. Temperature ranging …

Go to article

Effect Of Lanthanum Doping On Phase Transition, Piezoelectric And Energy Storage Properties Of Lead-Free 0.93(Bi0.5na0.5)Tio3‒0.07batio3 Ceramics, Pathit Premwichit, Songphop Jaila, Sasiporn Prasertpalichat Jan 2025

Effect Of Lanthanum Doping On Phase Transition, Piezoelectric And Energy Storage Properties Of Lead-Free 0.93(Bi0.5na0.5)Tio3‒0.07batio3 Ceramics, Pathit Premwichit, Songphop Jaila, Sasiporn Prasertpalichat

Journal of Metals, Materials and Minerals

In this study, lead-free (Bi0.465Na0.465Ba0.07)(1–x)LaxTiO3 (x=0.0‒0.04) ceramics were synthesized using a conventional solid-state reaction method. All samples showed a single-phase perovskite structure with pseudocubic symmetry. The dense microstructure revealed a decrease in average grain size as x increased. La3+ addition stabilized polar nanoregions (PNRs), shifting the ferroelectric to relaxor phase transition temperature (TF₋R=104℃ for x=0.0) to below room temperatures as La3+ content increased. This resulted in a transition from a rectangular to a relaxor-like thin P–E loop (x≥0.01), indicating a shift from ferro-electric (FE) to relaxor ferroelectric (RFE), which …

Go to article

Aluminium Oxide Particles-Containing Organogels For Cleaning Of Optical Glass Surfaces, Galina Vladimirovna Lyamina, Oksana Valerievna Dubinina, Alfa Edison I Lela Jan 2025

Aluminium Oxide Particles-Containing Organogels For Cleaning Of Optical Glass Surfaces, Galina Vladimirovna Lyamina, Oksana Valerievna Dubinina, Alfa Edison I Lela

Journal of Metals, Materials and Minerals

Hypothesis:  Some types of cleaning methods are not very effective and can actually increase damage to the optical parts being cleaned. As an alternative to these methods, we propose the use of gel-like substances to remove contaminants from optical surfaces. We have developed a method for cleaning optical glass surfaces that uses organogels, which are based on copolymers of methyl methacrylate and methacrylic acid. These organogels are loaded with polyethylene glycol, and aluminum oxide particles (Al2O3), which help to effectively remove contaminants without causing damage to the surface.   Experiments:  Al2O3 nanoparticles prepared by a Nano Spray Dryer were added to …

Go to article

Realization Of Water Tidal Datum Levels From Observed Sea Level Data In Damietta Harbor, Egypt, Mohamed M. Helmy, Amr N. Shokry, Mohamed M. Youssef, Ahmed M. Khedr Jan 2025

Realization Of Water Tidal Datum Levels From Observed Sea Level Data In Damietta Harbor, Egypt, Mohamed M. Helmy, Amr N. Shokry, Mohamed M. Youssef, Ahmed M. Khedr

Mansoura Engineering Journal

Sea level is an essential oceanographic parameter in hydrographic surveying that is always necessary for the realization of Chart Datum (CD). The International Hydrographic Organization (IHO) defines sea levels as those expected to occur under typical meteorological conditions, regardless of any possible combination of astronomical conditions. The current research focuses on analysing the observed sea level in Damietta Harbor, using two sets of sea-level records obtained from two sensors: a pressure sensor and a radar sensor. These records were collected from a tide gauge station located at Damietta Harbor from July 1, 2019, to March 2, 2020. Furthermore, harmonic analysis …

Go to article

Durability Of Precast Prestressed Concrete Pile In Exposure Severe Environment, Nantawat Khomwan, Pinai Mungsantisuk Jan 2025

Durability Of Precast Prestressed Concrete Pile In Exposure Severe Environment, Nantawat Khomwan, Pinai Mungsantisuk

Journal of Metals, Materials and Minerals

This research project focuses on studying the corrosion resistance of precast prestressed concrete (PC) piles under severe conditions. All PC and non-PC samples were cast using Portland cement type III. The samples included 1 m and 6 m length specimens. To evaluate the effectiveness of corrosion prevention, Sacrificial Anode Cathodic Protection (SACP) was installed in the specimens. Various durability properties of concrete were tested, including chloride permeability, concrete resistivity, and half-cell potential. For short-term effects, an electrical accelerated condition was conducted for the 1 m specimens, which were submerged in a 5% sodium chloride solution by weight. Experimental studies were …

Go to article

Investigation Of Photocathodic Corrosion Protection Of Zno/Zns Thin Film For Aisi 304 Stainless Steel In 3.5 Wt% Nacl Solution, Soravid Veerapong, Naw Blessing Oo, Boossayamas Dachbumroong, Parichart Chaum, Thanate Na Wichean, Oratai Jongprateep, Naray Pewnim, Gasidit Panomsuwan, Ratchatee Techapiesancharoenkij Jan 2025

Investigation Of Photocathodic Corrosion Protection Of Zno/Zns Thin Film For Aisi 304 Stainless Steel In 3.5 Wt% Nacl Solution, Soravid Veerapong, Naw Blessing Oo, Boossayamas Dachbumroong, Parichart Chaum, Thanate Na Wichean, Oratai Jongprateep, Naray Pewnim, Gasidit Panomsuwan, Ratchatee Techapiesancharoenkij

Journal of Metals, Materials and Minerals

Photocathodic protection is an alternative cathodic protection technique to protect metals by photo-generated electrons from a coupled semiconductor film under solar light. In this report, ZnO nanorods and heterostructure ZnO/ZnS nanorod films  on FTO substrates were studied for their photocathodic protection for 304 stainless steels (304 SS) in a 3.5 wt% NaCl solution.  The ZnO and ZnO/ZnS nanorods were fabricated on FTO substrates by spray pyrolysis and hydrothermal processes. The photocathodic performances of the ZnO and ZnO/ZnS photoanodes coupled with 304 SS samples were examined by Open-Circuit Potential (OCP), polarization curve analysis, and electrochemical impedance spectra (EIS). The ZnO/ZnS photoanodes …

Go to article

Investigation Into Parameters Affecting The Synthesis Of Hybrid Gold Nanoparticle/ Nitrogen-Doped Carbon Dot Colloids, Thammika Srisaman, Anyarat Watthanaphanit Jan 2025

Investigation Into Parameters Affecting The Synthesis Of Hybrid Gold Nanoparticle/ Nitrogen-Doped Carbon Dot Colloids, Thammika Srisaman, Anyarat Watthanaphanit

Journal of Metals, Materials and Minerals

This study reports a two-step synthesis method for producing hybrid nanoparticles composed of gold nanoparticles (AuNPs) and nitrogen-doped carbon dots (CDs). Initially, we employed hydrothermal synthesis to fabricate CDs derived from mangosteen peel extract, which exhibits green light emission. Subsequently, the hybrid AuNPs/CDs were synthesized by inducing plasma in a solution containing CDs and a gold precursor, namely gold(III) chloride trihydrate. Our primary aim was to investigate the key parameters influencing the synthesis process. We assessed the colloidal properties of the AuNPs/ CDs by introducing a stabilizer, specifically sodium alginate, and examined how factors such as the presence of sodium …

Go to article

Arginine-Modified Surface Coffee Grounds Activated Carbon For Pb2+ Adsorption: Kinetic, Isotherm And Thermodynamic Studies, Jarawee Chupirom, Sirikorn Khaophong, Nopporn Hemyakorn, Sonchai Intachai, Panita Kongsune Jan 2025

Arginine-Modified Surface Coffee Grounds Activated Carbon For Pb2+ Adsorption: Kinetic, Isotherm And Thermodynamic Studies, Jarawee Chupirom, Sirikorn Khaophong, Nopporn Hemyakorn, Sonchai Intachai, Panita Kongsune

Journal of Metals, Materials and Minerals

This research focuses on enhancing the value of coffee waste by converting it into activated carbon for removing Pb²⁺ ions from contaminated water. Coffee grounds were activated with KOH and carbonized at 600°C for 4 h to produce activated carbon (CGAC), then modified with arginine via hydrothermal treatment at 120°C for 48 h to create Arg-CGAC. The adsorbents' chemical and physical properties were analyzed using SEM, FT-IR, BET, and pHpzc methods. Batch experiments revealed that Arg-CGAC exhibited superior Pb2+ adsorption (223.10 mg∙g‒1) compared to CGAC (119.23 mg∙g‒1) under optimal conditions. Isotherm analysis showed stronger adsorbate-adsorbent interactions and a more endothermic …

Go to article

Enhancement Of Cell Viability Of The (Ba,Ca)(Zr,Ti)O And Hydroxyapatite Composites For Bone-Repair Applications, Jirapa Tangsritrakul, Manita Boonchoo, Piyanan Boonphayak, Paweena Uppanan, Pakkanun Kaewkong Jan 2025

Enhancement Of Cell Viability Of The (Ba,Ca)(Zr,Ti)O And Hydroxyapatite Composites For Bone-Repair Applications, Jirapa Tangsritrakul, Manita Boonchoo, Piyanan Boonphayak, Paweena Uppanan, Pakkanun Kaewkong

Journal of Metals, Materials and Minerals

In this work, the influence of hydroxyapatite (HA) addition to the calcium/zirconium-doped barium titanate (BCZT) piezoceramic was investigated to evaluate its potential for bone-repair applications. The relationship between the physical, electrical, and biological properties of the (100-x)BCZT-(x)HA composite was observed via various techniques. The HA powder was synthesized via precipitation method, whereas the BCZT powder was produced by solid-state reaction to prepare the (100-x)BCZT-(x)HA composites, where x = 0 wt% to 50 wt%. The results showed that the dielectric, ferroelectric, and piezoelectric properties of the (100-x)BCZT-(x)HA composites decreased dramatically as introducing HA into BCZT due to the occurrence of secondary …

Go to article

Structural And Dynamic Analysis Of Tapered Mast Bladeless Wind Turbines Using Fea And Cfd For Renewable Energy Generation, A. Pradeep, Raman Kumar, P. S. Satheesh Kumar, Nagaraj Patil, Vijayakumar Sivasundar, P. Vijaya Kumar, Selvaraj Manickam, Debasish Shit Jan 2025

Structural And Dynamic Analysis Of Tapered Mast Bladeless Wind Turbines Using Fea And Cfd For Renewable Energy Generation, A. Pradeep, Raman Kumar, P. S. Satheesh Kumar, Nagaraj Patil, Vijayakumar Sivasundar, P. Vijaya Kumar, Selvaraj Manickam, Debasish Shit

Journal of Metals, Materials and Minerals

The present analysis investigates the possibility of using a tapered mast profile for bladeless wind turbines (BWTs) to enhance the function of extracting wind energy through the phenomenon of vortex-induced vibrations. Conventional HAWTs which remain the most efficient are however, costly in maintenance, mechanically complicated and rather unfavourable to the environment. To overcome these challenges a prototype BWT with a 0.6 m tapered mast was developed for the currents using mild steel and hollow square steel sections. Wind tunnels were also used to compare stress distribution, structural deformation and vane vortex shedding for the building at different wind speeds. The …

Go to article

Analyse The Mechanical Property Optimization For Fdm/3d-Printed Polycarbonate Using Taguchi And Topsis Techniques, N. Srinivasa Rao, Raman Kumar, N. Kavitha, Ramachandran T., Hari Prasadarao Pydi, Aman Shankhyan, Ram Subbiah, Vikasdeep Singh Mann Jan 2025

Analyse The Mechanical Property Optimization For Fdm/3d-Printed Polycarbonate Using Taguchi And Topsis Techniques, N. Srinivasa Rao, Raman Kumar, N. Kavitha, Ramachandran T., Hari Prasadarao Pydi, Aman Shankhyan, Ram Subbiah, Vikasdeep Singh Mann

Journal of Metals, Materials and Minerals

Fused Deposition Modeling is 3D printing techniques which chiefly appreciated for prototypes. This manufacturing process works by extrusion of thermoplastic materials to make the three-dimensional objects. In this work, we pursued to identify the FDM parameters to increase mechanical properties, specifically ultimate tensile strength (UTS) and compressive strength (CMS). Polycarbonate was chosen to create the test samples because of the best thermal and mechanical properties, which was the increasing manufacturing applications of 3D printing. Nine experiments were conducted to verify the interaction of the considered parameters, namely infill rate (IR), printing speed (PS), and film height (FH). The combined use …

Go to article

Low-Cost High Performance Sustainable Triboelectric Nanogenerator Based On Laboratory Waste, Archana Panda, Kunal Kumar Das, Kushal Ruthvik Kaja, Venkataramana Gandi, Sunit Gourav Mohanty, Basanta Kumar Panigrahi Jan 2025

Low-Cost High Performance Sustainable Triboelectric Nanogenerator Based On Laboratory Waste, Archana Panda, Kunal Kumar Das, Kushal Ruthvik Kaja, Venkataramana Gandi, Sunit Gourav Mohanty, Basanta Kumar Panigrahi

Journal of Metals, Materials and Minerals

The production of waste materials in laboratories is an unavoidable consequence of diverse experiments and activities. These materials can range from chemicals, solvents, and biological samples to electronic components, glassware, and plastics. Typically, this waste is classified into hazardous and non-hazardous categories, requiring careful disposal to avoid environmental and health risks. These can be repurposed for energy harvesting methods, such as using polymers in triboelectric nanogenerators (TENGs) or recycling metallic waste for electrodes. This approach reduces waste while advancing sustainable energy solutions. This technique demonstrates remarkable efficiency in utilizing diverse waste materials to transform various forms of mechanical energy into …

Go to article

Efficacy Of Bifeo3 And Bi4ti3o12 Towards Photocatalytic Degradation Of Mg And Mb Dyes: A Comparative Study Under Solar Irradiation, Rasmirekha -, Rishabh Kamal, Debapriya -, Suresh Kumar Dash Jan 2025

Efficacy Of Bifeo3 And Bi4ti3o12 Towards Photocatalytic Degradation Of Mg And Mb Dyes: A Comparative Study Under Solar Irradiation, Rasmirekha -, Rishabh Kamal, Debapriya -, Suresh Kumar Dash

Journal of Metals, Materials and Minerals

Bismuth-based perovskite material has been used as promising photocatalysts for photo catalytic degradation of toxic dyes with tailored crystallites and fine-tuned band gap for superior activity. BiFeO3 and Bi4Ti3O12 were synthesized by a simple sol-gel method and their crystal structure, morphology, and optical property were characterized by XRD, SEM, TEM, FTIR, EDS and UV–DRS. The XRD pattern exhibits the formation of rhombohedral and orthorhombic phase of bismuth ferrite and bismuth titanate. The study confirms the formation of non-uniform BiFeO3 and Bi4Ti3O12 nanoparticles with uniform particle distribution, with band gap energy (Eg) of 2.2 eV and 2.9 eV, respectively, from UV-DRS …

Go to article

Synergistic Effects Of Ti3c2tx Mxene On The Structural And Dielectric Properties Of Blend-Based Dielectrics, Nitesh Kumar Nath, Rajanikanta Parida, Bichitra Nanda Parida, Nimai C. Nayak Jan 2025

Synergistic Effects Of Ti3c2tx Mxene On The Structural And Dielectric Properties Of Blend-Based Dielectrics, Nitesh Kumar Nath, Rajanikanta Parida, Bichitra Nanda Parida, Nimai C. Nayak

Journal of Metals, Materials and Minerals

The PVDF/PMMA-Ti₃C₂Tx MXene composite (PMC) films are processed via the solution casting method. The various phases (α, β) of PVDF have been identified through analysis using an X-ray diffractometer and Fourier transform infrared spectroscopy instruments. The maximum percentage β phase (%) obtained was 73.15%, which corresponds to a 10.0 wt% composite film. The structural analysis revealed that the Ti3C2Tx nanoparticles are immiscibly distributed throughout the blend matrix, allowing the electrical conductivity and dielectric constant values to noticeably increase at constant frequency. The highest dielectric loss of 0.077 and the highest dielectric constant (εr) of 191.5 …

Go to article

The Effect Of Fe-Nimnmo High Entropy Alloy Electrode On Enhancing The Weldability And Mechanical Properties Of Railway Steel 900a, Sarawut Chaowakarnkool, Kanokwan Uttarasak, Sittipong Jaipayuk, Narin Jantaping, Man Tuiprae Jan 2025

The Effect Of Fe-Nimnmo High Entropy Alloy Electrode On Enhancing The Weldability And Mechanical Properties Of Railway Steel 900a, Sarawut Chaowakarnkool, Kanokwan Uttarasak, Sittipong Jaipayuk, Narin Jantaping, Man Tuiprae

Journal of Metals, Materials and Minerals

The rail transport system is essential for moving passengers and heavy goods over long distances, with steel 900A being a common material used for rail tracks in Thailand. Prolonged exposure to heavy loads and variable environmental conditions can lead to rail track damage known as "engine burn”, which results from friction between the train’s wheels and the rail. The flux-cored arc welding (FCAW) process is employed to repair these burns due to its use of readily available electrode wires and the efficiency of the repair. However, welding high-carbon steel like rail steel 900A poses challenges, such as a tendency to …

Go to article

Review On Surface Engineering Of Nmc For High Performance Of Lithium-Ion Batteries, Pongsakorn Kantichaimongkol, Thanyalux Wanotayan, Jiaqian Qin Jan 2025

Review On Surface Engineering Of Nmc For High Performance Of Lithium-Ion Batteries, Pongsakorn Kantichaimongkol, Thanyalux Wanotayan, Jiaqian Qin

Journal of Metals, Materials and Minerals

The lithium-ion battery stands as a highly promising energy storage system. Among its key components, the cathode material—particularly lithium nickel manganese cobalt oxide (LiNiMnCoO₂), or NMC—is of great importance due to its high specific capacity and cost-effectiveness. Despite its advantages, NMC faces certain challenges, with limited cycle performance being one of the most critical issues. To address this issue, extensive research has been dedicated to surface modification strategies for NMC materials. Studies have identified two primary approaches, doping and coating, both of which have proven effective in enhancing the material's long-term stability. This work systematically examines, categorizes, and compares recent …

Go to article

The Influence Of Aluminium Dross Residue And Coal Fly Ash On The Properties Of Geopolymers, Haswanee Phungpha, Pitak Laoratanakul, Benya Cherdhirunkorn Jan 2025

The Influence Of Aluminium Dross Residue And Coal Fly Ash On The Properties Of Geopolymers, Haswanee Phungpha, Pitak Laoratanakul, Benya Cherdhirunkorn

Journal of Metals, Materials and Minerals

In this research, aluminium dross residue (AD) and coal fly ash (FA) were used for the production of geopolymers. The illegal dumping of AD and the high cost for AD waste disposal have been problems for long time in Thailand. Therefore, the feasibility of using AD (0 wt% to 100 wt%) in the geopolymer production had been carried out to find the alternative way to resolve these problems. The alkaline solution of NaOH 7 M and Na2SiO3 with the ratio of 1:3 was used for the geopolymerization reaction. It was found that the addition of AD caused the ammonia gas …

Go to article

Tin Oxide Nanoparticle Extraction From Waste Solder Dross Via Low-Temperature Hydrometallurgical Process, Tanongsak Yingnakorn, Sirunya Somla, Thanapon Chandakhiaw, Ethan Cheung, Sakhob Khumkoa Jan 2025

Tin Oxide Nanoparticle Extraction From Waste Solder Dross Via Low-Temperature Hydrometallurgical Process, Tanongsak Yingnakorn, Sirunya Somla, Thanapon Chandakhiaw, Ethan Cheung, Sakhob Khumkoa

Journal of Metals, Materials and Minerals

This study proposes a hydrometallurgical approach to valorising industrial waste by producing SnO2 nanoparticles (NPs) from waste solder dross obtained by skimming off of tin solder baths from electronic dipping processes. The process involves leaching the dross with aqueous hydrochloric acid solution and hydrogen peroxide, followed by precipitation with ammonium hydroxide and purification with aqueous nitric acid solution. The optimised leaching conditions were determined to be 4 mol∙ L‒1 HCl, 11% v/v H2O2, 25℃, and a leaching time of 15 min. SnO2 NPs were successfully precipitated at pH 4 using 25% v/v NH4OH and purified with 1 mol∙ L‒1 HNO3. …

Go to article

Investigation Of Pressure And Temperature Distributions In Aerofoils Using Cfd Simulation, Ramesh Krishnan L., Jasgurpreet Singh Chohan, S. Vijayakumar, N. Beemkumar, Sriram Desikan, V. Nagabhushana Rao, M.Naga Swapna Sri, Mayank Kundlas Jan 2025

Investigation Of Pressure And Temperature Distributions In Aerofoils Using Cfd Simulation, Ramesh Krishnan L., Jasgurpreet Singh Chohan, S. Vijayakumar, N. Beemkumar, Sriram Desikan, V. Nagabhushana Rao, M.Naga Swapna Sri, Mayank Kundlas

Journal of Metals, Materials and Minerals

Most aircraft derive the design of their wings, fins, and horizontal stabilizers from this construction approach, incorporating curved surfaces to enhance the lift-to-drag ratio during flight. Over the past decade, Computational Fluid Dynamics (CFD) has become the leading tool for designing components and processes involving fluid or gas movement across industries such as aviation, automotive, and manufacturing. This study examines the aerodynamic characteristics—including pressure, density, and temperature distribution, as well as lift and drag forces—of two different angles of attack based on the M13 and Eppler 1233 airfoils. The analysis considers an airfoil with varying chord thickness while maintaining a …

Go to article

Photocatalytic Behaviour Of (Biybo3)0.5-(Batio3)0.5, Yasaswi Priyadarshini Samal, Subhalaxmi Patra, Tapan Das, Minakshi Padhy Jan 2025

Photocatalytic Behaviour Of (Biybo3)0.5-(Batio3)0.5, Yasaswi Priyadarshini Samal, Subhalaxmi Patra, Tapan Das, Minakshi Padhy

Journal of Metals, Materials and Minerals

Different organic compounds like dyes and pharmaceutical contaminants pollute a large amount of water which can increase the chemical oxygen demand in water bodies. The photodegradation of dyes has been widely studied using TiO2-based nanomaterials, which are typical photocatalysts. TiO2 is highly effective in reducing pollutants when exposed to UV light and does not cause secondary pollution. However, TiO2 is only functional when exposed to UV light, which is not ideal for real-world use. This drawback of TiO2 pulls the research towards modified photocatalysts for better yield. In this study, the (BiYbO3)0.5 - (BaTiO3)0.5 material was formulated by solid state …

Go to article

Synergistic Effects Of Co-Ni Nanoalloys On Sio2@Tio2: A Novel Approach To Photocatalytic Tetracycline Degradation, Pratyush Kumar Sahu, Alaka Rath, Aslisha Champati, Ashish Madual, Pravat Manjari Mishra, Abanti Pradhan, Brundabana Naik Jan 2025

Synergistic Effects Of Co-Ni Nanoalloys On Sio2@Tio2: A Novel Approach To Photocatalytic Tetracycline Degradation, Pratyush Kumar Sahu, Alaka Rath, Aslisha Champati, Ashish Madual, Pravat Manjari Mishra, Abanti Pradhan, Brundabana Naik

Journal of Metals, Materials and Minerals

To develop a cost-effective alternative to noble metal catalysts for photocatalysis, we synthesized a series of bimetallic Co-Ni nanoalloys on core-shelled SiO2@TiO2 nanostructures via a chemical reduction approach. The research demonstrates the photocatalytic behaviour of the Co-Ni alloy-enhanced SiO2@TiO2 (ST-Co, Ni) hybrid nanocatalyst, focusing on its crystalline structures, morphological shapes, chemical conditions, and optical properties, utilizing techniques such as X-ray diffraction, field emission scanning electron microscopy, UV-visible diffuse reflectance spectroscopy, photoluminescence spectroscopy, transmission electron microscope, and electrochemical analysis. The catalyst was evaluated for its effectiveness in degrading tetracycline, an overused antibiotic that persists in aquatic environments and is known for …

Go to article

Studies Of Structural, Microstructural, Dielectric, And Electrical Characterization Of Binaznmoo6 Double Perovskite, Swati Panda, Supriya Barik, Ritu Purna Sahu, Adwit Prasad Sahu, S. Mishra, S. K. Parida Jan 2025

Studies Of Structural, Microstructural, Dielectric, And Electrical Characterization Of Binaznmoo6 Double Perovskite, Swati Panda, Supriya Barik, Ritu Purna Sahu, Adwit Prasad Sahu, S. Mishra, S. K. Parida

Journal of Metals, Materials and Minerals

This study investigates the structural, microstructural, dielectric, and electrical properties of BiNaZnMoO₆ (BNZM) ceramic synthesized using a conventional solid-state reaction method. Preliminary structural analysis using X-ray diffraction (XRD) suggests orthorhombic crystal symmetry. Scanning electron microscopy (SEM) micrographs reveal a uniform distribution of well-grown grains with well-defined grain boundaries, which may contribute to the enhanced dielectric properties. Energy dispersive X-ray spectroscopy (EDX) analysis confirms the presence of all constituent elements Bi, Na, Zn, Mo, and O in the studied sample. Dielectric spectra analysis as a function of frequency and temperature indicates the formation of high-quality dielectric materials, evidenced by a high …

Go to article

Graphitic Carbon Nitride Loaded Bi4o5i2 For Elevated Photocatalytic Tetracycline Degradation, Subhasish Mishra, Barsha Marandi, Kali Sanjay, Rashmi Acharya Jan 2025

Graphitic Carbon Nitride Loaded Bi4o5i2 For Elevated Photocatalytic Tetracycline Degradation, Subhasish Mishra, Barsha Marandi, Kali Sanjay, Rashmi Acharya

Journal of Metals, Materials and Minerals

As a robust photocatalyst, Bi4O5I2 have has attracted significant scientific interest owing to its narrow bandgap energy, escalated electronic properties and high stability. Nonetheless, the unfavourable band structure and higher recombination of excitons have restricted its diversified photocatalytic applications. In this context, binary heterojunction construction using Bi4O5I2 could be considered an effective strategy for spatial charge carrier separation across the hetero-interface, leading to an enhanced activity. In this study, we have prepared Bi4O5I2/g-C3N4 Z-scheme hetero-structures via a wet impregnation strategy that preserves the spherical structure of Bi4O5I2. The phase purity, chemical bonding, morphology and microstructure of the composite were confirmed …

Go to article

Oxidation Of Sn-1 Wt.% Bi In Air And In Oxygen Deprived Environment, Pakawat Polmanee, Benjie Fernandez, Patama Visuttipitukul, Ittipon Cheowanish, Tachai Luangvaranunt Jan 2025

Oxidation Of Sn-1 Wt.% Bi In Air And In Oxygen Deprived Environment, Pakawat Polmanee, Benjie Fernandez, Patama Visuttipitukul, Ittipon Cheowanish, Tachai Luangvaranunt

Journal of Metals, Materials and Minerals

Oxidation of Sn-1wt% Bi in air and in oxygen deprived environment is studied in this research. Electrochemical process with SERA technique was used to determine oxide film thickness and rate of oxidation of tin alloy. The thickness of oxide film at 72 hours of the specimens that is tested in air, in vacuum, in argon environment, and wrapped with plastic film are 16, 10, 18, and 13 Å respectively. XPS was used to determine the type of oxides in the oxide layer. Result after signals deconvolution shows that SnO and SnO2 compounds were formed on the Sn-1wt% Bi surface.

Go to article

Solar Radiation Assisted Photocatalytic Degradation Of Congo Red Using Ce Doped Lacoo3, Rishabh Kamal, Rasmirekha Pattanaik, Debapriya Pradhan, Suresh Kumar Dash Jan 2025

Solar Radiation Assisted Photocatalytic Degradation Of Congo Red Using Ce Doped Lacoo3, Rishabh Kamal, Rasmirekha Pattanaik, Debapriya Pradhan, Suresh Kumar Dash

Journal of Metals, Materials and Minerals

A viable sol-gel synthesis technique was used to synthesize LaCoO3 and Ce doped LaCoO3 for degradation of congo red dye taking a renewable source of light i.e solar radiation. The crystalline structure, morphology, and optical properties of the synthesized catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) analysis of Ce-doped LaCoO₃ confirmed the presence of La (3d), Ce (3d), Co (2p), C (1s), and O (1s) and their valence states in the perovskite matrix, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and ultraviolet diffuse reflectance spectroscopy (UV-DRS). The XRD analysis with a prominent diffraction peak detected …

Go to article

First Prev Next Last