Engineering Science and Materials Commons^™

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

A Methodology For Determining Optimal Milling Parameters For Low-Taper Microtensile Sample Production, Zachary Wayne Barker

Open Access Theses & Dissertations

Femtosecond lasers are beginning to see an increase in interest for industrial and high throughput microsample milling applications. Despite this, much of the literature regarding removal rate studies for ultrashort pulse laser milling continues to focus on single-pulse or similar experiments that have a very small time on target. The material volume removal rates of femtosecond milling can vary wildly depending on parameters like laser scan speed, hatch spacing, z-axis step size, and pulses on the material. Currently, there is no established methodology for determining the optimal values of these parameters for micromilling applications. This methodology was developed in this …

Effect Of The Microstructure On The Corrosion Behavior Of Alcunimn And Alcunimnsi High Entropy Alloys In A 3.5wt% Nacl Solution, Celine Chiong

Open Access Theses & Dissertations

In this study, the AlCuNiMn and AlCuNiMnSi high entropy alloys (HEAs) are investigated to characterize the effect of Si addition and subsequent annealing treatments on the corrosion behavior in a 3.5wt% NaCl solution at room temperature. The microstructure evolution from the as-received condition and after annealing at 600°C, 800°C, and 1000°C for 24 hours in air is examined. The microstructural transformation of HEAs is extensively reported in the literature. However, its impact on the corrosion resistance of HEAs has not received the same attention. In this study, an increase in the annealing temperature of the base AlCuNiMn alloy improved the …

Laser Powder Directed Energy Deposition (Lp-Ded) Inconel 718: Laser Power And Heat Treatment Effect On Microstructure And Mechanical Properties, Dana Victoria Godinez

Open Access Theses & Dissertations

This study examines the microstructure and mechanical properties (tensile, hardness, and fatigue endurance) of laser powder-directed energy deposition (LP-DED) printed specimens with varying deposition parameters. Five samples with power inputs ranging from 350 to 2620W, all of similar thicknesses, were evaluated to enable a direct comparison. The varying specimens were heat treated, including stress relief, hot isostatic pressing, solution, and two-step aging. The resulting microstructures and their corresponding hardness values were compared at each heat treatment stage. The fully heat-treated specimens' tensile properties and fatigue life were also examined and compared. Key findings of this study indicate that complete heat …

Feasibility Study For The Detection Of Damage To Composite Overwrapped Pressure Vessels With Phase Array Ultrasonic Testing, Jordan Scott Hitter

Open Access Theses & Dissertations

When discussing the field of Nondestructive Examination, there are various techniques and instrumentation that can be utilized for analysis of components. However, with newer technology and the development of newer forms of technique, it is critical to explore exactly how these can be applied. This work will aim to explore one newer technique, Phased Array Ultrasonic Testing, and determine the viability of its use for examining Composite Overwrapped Pressure Vessels (COPVs). Currently, the types of vessels have been used in a variety of ways such as in transportation vehicles. More notably, these vessels are used in aerospace applications hence the …

Microstructural Characterization And Oxidation Behavior Of Al-Cu-Ni-Mn And Al-Cu-Ni-Mn-Si Non-Body Centered Cubic High Entropy Alloys, Mckenna Mae Lin Hitter

Open Access Theses & Dissertations

High entropy alloys (HEA) differ from traditional alloying systems because five elements are mixed in equi-atomic proportions, as opposed to having one main principal element. As a result of exploring this new method of alloying, it was found that high entropy alloys demonstrate exceptional mechanical properties, an example being oxidation resistance, and are capable of enduring elevated temperatures. Seeing the potential that this new area of interest contains, studies involving a combination of elements to form various HEA have been performed. Most refractory metals are body-centered cubic and possess extremely high melting temperatures, so they are regularly considered when designing …

Analysis Of Drying Behavior Of Robocasted Barium Titanate, Abigail Ortega

Open Access Theses & Dissertations

Finding an adequate ceramic formulation for material extrusion is a time-consuming process. The necessary equipment may be unavailable to perform the desired test. This study demonstrated an alternative to observe a material after extrusion to understand its drying process. This study focused on 55 solid loading volume percent and a 39 solid loading volume percent, each with two different binder treatments focusing on fresh same day made binder, a 30 day old, aged binder and lastly an artificial binder obtained by a fuming process. Firstly, a formulation was created and loaded onto a pressure-based syringe to be extruded with a …

A Manufacturing-To-Response Pathway For Manufacturing Optimization Of Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Dissertations

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …

Design And Application Of Smart Systems To Address Analytical Problems, Lucas B. Ayres

All Dissertations

This dissertation is a multidisciplinary effort that integrates low-cost analytical instrumentation, redox chemistry, and artificial intelligence to overcome existing limitations in the fields of wearable sensing technology, Deep Eutectic Solvents (DES), and antioxidant chemistry. The overall goal behind each implemented strategy is to enhance the accuracy, efficiency, and accessibility of analytical processes and technologies. A general overview of the thesis, along with the research outcomes is included in Chapter One. The theoretical framework of this dissertation is presented in Chapter Two. Chapter Three describes the development of a wearable platform (sensor and instrumentation) to rapidly detect (~20 minutes) S. aureus …

Boron-Doped Diamond As A Resilient Electrode Material In Molten Salts, Hannah Katherine Patenaude

UNLV Theses, Dissertations, Professional Papers, and Capstones

Molten salt chemistry has a range of applications within nuclear technology, including for the Molten Salt Reactors (MSRs) and pyroprocessing to recover valuable actinides for energy and national security needs. However, the high-temperature, corrosive nature of molten salts makes them particularly challenging to deploy on an industrial scale and study in benchtop measurements. Material accountability and corrosion monitoring of MSR fuels are essential components to the successful deployment of MSRs, and electroanalytical techniques like cyclic voltammetry (CV) and spectroelectrochemistry (SEC) can provide a wealth of information to describe salt systems in situ. To perform such measurements, it is imperative to …

Improving Static Cold Storage Life Of The Human Heart Before Transplant, Juan Sebastian Rodriguez Paez

Theses and Dissertations

Organ storage and transportation are critical steps for the success of organ transplantation. Static cold storage (SCS) of hearts for heart transplantation (HTx) remains the standard approach. However, SCS may involve damage to the tissue resulting from extended hypothermic preservation, potentially affecting organ viability. More over, the temperature distribution on and within the heart is unknown during heart transplantation. Therefore, there is an interest to study different stages of the heart transplantation process towards determining the 3D temperature distribution on and within the heart. There could be a possibility of having a hypothermic injury in different parts of the heart …

Enhanced Post Deposition Annealing Conditions On The Fabrication Of High Quality Thermochromic Vanadium Dioxide Films, Nuru R. Mlyuka

Tanzania Journal of Engineering and Technology (TJET)

Sputter deposition of thermochromic VO2 thin films for smart window applications has been faced with several challenges including the need for high deposition temperature, extremely precise and narrow range of oxygen/argon flow ratio and target poisoning during sputtering. Deposition of VO2 at room temperature without oxygen followed by post-deposition annealing has been cited as one of the potential mitigations to the challenge. In this study, the effects of post-deposition annealing conditions on the structural, electrical and optical properties of VO2 thin films are reported. The films were prepared on soda lime glass substrates using DC magnetron sputtering of metallic vanadium …

General Hydrogeochemical Characterization Of Groundwater In Coastal Aquifers Of Kilwa Kisiwani Oceanic Island, South East Tanzania, Simon R Melchioly

Tanzania Journal of Engineering and Technology (TJET)

The main objective of this study was to determine the hydrogeochemical processes controlling the groundwater chemistry on the Island and assess its suitability for human consumption and irrigation. The methodology used in the study include hydrogeological assessment of the study area and laboratory analysis for general physico-chemical parameters of groundwater. Other parameters such as Soluble sodium percentage (SSP) or % Na+, Sodium Adsorption Ratio (SAR), Magnesium adsorption ratio (MAR), Residual sodium carbonate (RSC), hydrochemical facies classification, and Water Quality Index (WQI) were calculated using empirical formulae. The effects of salinization of groundwater were classified using the chloride-Bicarbonate (Cl/HCO3) and the …

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

As a way of accelerating the deployment of affordable and clean renewable energy generation technologies, applying a pump working as a turbine coupled to a self-excited induction generator is gaining popularity in various areas including energy recovery and micro hydro systems. However, it is currently challenging to predict the performance of the PAT-SEIG system and there is no agreed-upon rule on the selection of the appropriate system to be installed at a particular site. This paper has presented multi-objective optimization to select the best operating point of the PAT-SEIG system. The results show that the peak efficiencies for the PAT …

Production Of Biofertilizer From Fruit And Garden Waste, Neema Msuya

Tanzania Journal of Engineering and Technology (TJET)

The project focused on the production of bio-fertilizer from fruit and garden waste, with a specific emphasis on utilizing pineapple tops in the composting process. The objective was to produce and assess the properties of the bio fertilizer obtained from this process and evaluate its potential application in agriculture. In this study, the composting process was done in a 0.7 m long, 0.85 wide and 1.1 m high vessel, and 0.238 m3 pineapple top wastes, resulting in 0.35 m3 of biofertilizer. The bio fertilizer produced exhibited favorable characteristics, including a moisture content of 36%, pH of 7.1, and a total …

Assessment Of Risk Factors Related To Body Pain Complaints In Tanzania Construction Industry, Fatma K. Mohamed

Tanzania Journal of Engineering and Technology (TJET)

The construction industry is associated with risks that can result in musculoskeletal diseases. Although young male workers who are presumed to be healthy dominate the industry in Tanzania, body pain complaints have been widely reported. The aim of this study is to assess the prevalence and causes of body pains in workers. A cross-sectional study involving 396 workers was conducted. A chi square test was used for testing association of independent categorical variables and binary logistic regression analysis was used to determine predictors for body pain complaints. The results show that all study participants complained of at least one form …

Comparison Of Meteorological Drought Indices In Tanzania Using The Meteorological Drought Monitoring Software Package, Paul Ts Limbu

Tanzania Journal of Engineering and Technology (TJET)

Low precipitation, substantial evaporation, and an unequal distribution of precipitation throughout the area are the characteristics of drought, a climatic abnormality. This study used the Meteorological Drought Monitoring (MDM) software and monthly rainfall data from the Tanzania Meteorological Authority (TMA) to examine and compare the Deciles Index (DI), Standardised Precipitation Index (SPI), Percent of Normal Index (PNI), Rainfall Anomaly Index (RAI), Z-Score Index (ZSI), China-Z Index (CZI), and Modified China-Z Index (MCZI) for drought monitoring in Tanzania from 1988 to 2017. It was found that ZSI represented the dry years better than other indices, followed by DI, RAI, PNI, SPI, …

Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett

Tanzania Journal of Engineering and Technology (TJET)

Despite the introduction of the perimeter blasting technique at the Tulawaka Gold Mine, the mine continued to suffer from an overbreak of mine development headings, with an average overbreak of 24% every 22 m, which is approximately twice the acceptable 10% overbreak. The causes of this problem include ineffective drilling practices and uneven and excessive charging of explosives, resulting in a slightly high powder factor of 3.94 kg/m3 instead of 3.8 kg/m3, as per the design. The problem of overbreak resulted in ore dilution, a longer mine development cycle time and additional costs of approximately US$ 45 per cut, especially …

Electrochemical Syntheses Of Aryl-Substituted Benzothiophenes And Phenanthrenes Using Benzenediazonium Salts As The Aryl Radical Precursors, Li-Yuan Lan, Yang-Ye Jiang, Raymond Daniel Little, Cheng-Chu Zeng

Journal of Electrochemistry

Aryl-substituted benzothiophene and phenanthrene are important structural units in medicinal chemistry and materials science. Although extensive effort has been devoted to prepare these compounds and a variety of approaches have been developed to construct the 2-substituted benzothiophene core structure, environmental-friendly and efficient synthetic means are still desired. Based on our previous electrochemical Minisci-type arylation reaction with aryl diazonium salt as the aryl precursor, as well as the work from König’s group, herein, we described the use of paired electrolysis to achieve 2-aryl benzothiophenes and 9-aryl phenanthrenes employing benzenediazonium salts as the aryl radical precursors. Initially, 2-methylthiobenzendiazonium salt 1a and 4-methylbenzene …

Electrochemical Advanced Treatment Of Desulfurization Wastewater From Coal-Fired Power Plants, Ju-Cai Wei, Juan Yi, Xu Wu

Journal of Electrochemistry

Zero-emission of desulfurization wastewater is one of the main demands for coal-fired power plants. As typical high salinity wastewater, it is hard to purify the desulfurization wastewater from coal-fired power plants through traditional physicochemical treatment or biochemical treatment, e.g., COD and Cl^–. A high concentration of Cl^– ion in desulfurization wastewater restricts wastewater reuse and zero-emission. Electrochemical technology is an attractive method for high salinity wastewater zero-emission, which provides a versatile, efficient, cost-effective, easily automatable, and clean industrial process. For advanced treatment of effluent after triple box process treatment in power plants, this paper reports an electrochemical …

Electrocatalytic Cyclopropanation Of Active Methylene Compounds, Liang-Hua Jie, Hai-Chao Xu

Journal of Electrochemistry

The development of novel strategies to access cyclopropanes has become increasingly important due to the vital role of these three-membered ring structures in synthetic intermediates, natural products, and pharmaceuticals. Herein, we present an electrocatalytic method for the synthesis of cyclopropanes through intermolecular dehydrogenative annulation of active methylene compounds and arylalkenes. This electrochemical process requires no chemical oxidants, allowing for a speedy access to various functionalized cyclopropanes from inexpensive and readily available materials.

Thermal Performance Investigation Of Thermoelectric Cooling System With Various Hot-Side Cooling Methods, Bowo Y. Prasetyo, Parisya P. Rosulindo, Fujen Wang

Makara Journal of Technology

Thermoelectric devices have been widely used in various applications, including cooling and power generation. The potential application of thermoelectric cooling systems has been studied. However, these systems still face challenges in achieving optimal performance compared with other cooling systems. Several factors, including the hot-side cooling method, influence the performance of thermoelectric systems. This study aimed to investigate the effects of different hot-side cooling methods on the thermoelectric performance and thermal behavior of thermoelectric cooling systems. The testing methods involved the combination of the thermoelectric module with five hot-side heat exchangers, including a square heatsink, a round heatsink, a two-pipe heat …

Towards A Study Protocol: A Data-Driven Workflow To Identify Error Sources In Direct Ink Write Mechatronics, Hein Htet Aung, Quynh D. Tran, Pawan K. Tripathi, Roger H. French, Laura S. Bruckman

Faculty Scholarship

Using Direct Ink Write (DIW) technology in a rapid and large-scale production requires reliable quality control for printed parts. Data streams generated during printing, such as print mechatronics, are massive and diverse which impedes extracting insights. In our study protocol approach, we developed a data-driven workflow to understand the behavior of sensor-measured X- and Y-axes positional errors with process parameters, such as print velocity and velocity control. We uncovered patterns showing that instantaneous changes in the velocity, when the build platform accelerates and decelerates, largely influence the positional errors, especially in the X-axis due to the hardware architecture. Since DIW …

Injectable And Rapidly Expandable Thrombin-Decorated Cryogels Achieve Rapid Hemostasis And High Survival Rates In A Swine Model Of Lethal Junctional Hemorrhage, Syed Muntazir Andrabi, S.M. Shatil Shahriar, Al-Murtadha Al-Gahmi, Benjamin L. Wilczewski, Mark A. Carlson, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Effective therapies are urgently needed to stabilize patients with marginally compressible junctional hemorrhage long enough to get them to the hospital alive. Herein, we report injectable and rapidly expandable cryogels consisting of polyacrylamide and thrombin (AT cryogels) created by cryo-polymerization for the efficient management of lethal junctional hemorrhage in swine. The produced cryogels have small pore sizes and highly interconnected porous architecture with robust mechanical strength. The cryogels exhibit rapid shape memory properties and prove to be resilient against fatigue. These cryogels also show high water/blood absorption capacity, fast blood clotting effect, and enhanced adhesion of red blood cells and …

A Feasibility Study Of Drilling Fluid Slippage For Wellbore Displacement, John Johnson

LSU Master's Theses

In the ideal plug-flow mode viscoplastic drilling fluids display uniform frontal velocity due to wall slippage (at very low flowrate limited by the fluid’s yield strength). The flow rate could be increased by raising the yield strength that would make the fluid best candidate for frontal displacement. Based on this concept the study qualifies wall slippage effect for wellbore displacement. Using a conceptual model of fluid motion between two parallel plates defines maximum velocity as a function of shearing rate and yield stress. Conversion to coaxial geometry gives practical formulas for fluid testing with rotational viscometer. A new analysis of …

Numerical Analysis Of Flow Fields For The Different Models Of The Shrouded Savonius Rotor, Alsaied Khalil Mahmoud, Mohamed Mahgoub Bassuoni, Mohamed Fawzy Obiaa, Ahmed Mostafa Khaira

Journal of Engineering Research

In this study, the effect of three different lengths (short, medium, and long) of flanged shrouded Savonius wind turbines is investigated three-dimensional (3-D) numerically by ANSYS-FLUENT. The 3-D numerical model of a simple rotor is validated by comparing the results with previous published experimental ones at the same operating conditions and geometry. The numerical and experimental results indicate a good agreement with each other when using the SST K-ω model with a time step size of 0.0025 s.The analysis of the numerical results of the three flanged shrouded models shows an enhancement of the torque coefficient at tip speed ratio …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Technology Assessment For Cybersecurity Organizational Readiness: Case Of Airlines Sector And Electronic Payment, Sultan Ayed Alghamdi, Tugrul Daim, Saeed Mohammed Alzahrani

Engineering and Technology Management Faculty Publications and Presentations

Payment processing systems have advanced significantly in the airline business. Because e-payments are easy, they have captured the attention of many companies in the aviation industry and are quickly becoming the dominant means of payment. However, as technology advances, fraud grows at a comparable rate. Over the years, there has been a surge in payment fraud incidents in the airline sector, reducing the platform's trustworthiness. Despite attempts to eliminate epayment fraud, decision-makers lack the technical expertise required to use the finest fraud detection and prevention assessments. This research recognizes the lack of an established decision model as a hurdle and …

A General Materials Data Science Framework For Quantitative 2d Analysis Of Particle Growth From Image Sequences, Sameera Nalin Venkat, Thomas G. Ciardi, Mingjian Lu, Preston C. Deleo, Jube Augustino, Adam Goodman, Jayvic Cristian Jimenez, Anirban Mondal, Frank Ernst, Yinghui Wu, Roger H. French, Laura S. Bruckman

Faculty Scholarship

Phase transformations are a challenging problem in materials science, which lead to changes in properties and may impact performance of material systems in various applications. We introduce a general framework for the analysis of particle growth kinetics by utilizing concepts from machine learning and graph theory. As a model system, we use image sequences of atomic force microscopy showing the crystallization of an amorphous fluoroelastomer film. To identify crystalline particles in an amorphous matrix and track the temporal evolution of the particle dispersion, we have developed quantitative methods of 2D analysis. 700 image sequences were analyzed using a neural network …

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang

Journal of Electrochemistry

In recent years, joint time-frequency analysis has once again become a research hotspot. Supercapacitors have high power density and long service life, however, in order to balance between power density and energy density, two key factors need to be considered: (i) the specific surface area of the porous matrix; (ii) the electrolyte accessibility to the intra-pore space of porous carbon matrix. Electrochemical impedance spectra are extensively used to investigate charge penetration ratio and charge storage mechanism in the porous electrode for capacitance energy storage. Furthermore, similar results could be obtained by different methods such as stable-state analysis in the frequency …