Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 931 - 960 of 3176

Full-Text Articles in Engineering Science and Materials

Research Progress Of Novel Zirconium Alloys With High Strength And Toughness, Na Zhang, Chaoqun Xia, Jiaqian Qin, Qiang Li, Xinyu Zhang, Riping Liu Jan 2022

Research Progress Of Novel Zirconium Alloys With High Strength And Toughness, Na Zhang, Chaoqun Xia, Jiaqian Qin, Qiang Li, Xinyu Zhang, Riping Liu

Journal of Metals, Materials and Minerals

Atoms of zirconium (Zr) are often known as "first metals of the atomic age". Because of its low cross section for thermal neutron absorption, excellent corrosion resistance, and good mechanical and processing properties, it is extensively used in the nuclear industry. As the properties requirements of materials in chemical, medical and aerospace fields turn out to be higher, the application of Zr alloys in these non-nuclear fields has become more and more widespread due to their excellent properties. In addition to having a high melting point, Zr alloys also have a high specific strength and low thermal expansion coefficient. Therefore, …

Go to article

Rice Husk Ash Utilization, Composition And Properties: A Brief Review, Vignesh Nayak Ullal, Shivaramu H. T., Aveen K. P. Jan 2022

Rice Husk Ash Utilization, Composition And Properties: A Brief Review, Vignesh Nayak Ullal, Shivaramu H. T., Aveen K. P.

Journal of Metals, Materials and Minerals

Asian countries rely massively on rice to feed and sustain its massive population. For long the staple food has provided nourishment to the masses and the classes. Rice is grown in large quantities in Asian countries. A by-product of its cultivation is its husk. The husk of the rice grain is mainly utilized as a fuel for the boilers in the rice mills. The uncontrolled burnt rice husk referred to as rice husk ash consists majorly of silica. silica is used in a wide variety of commercial and industrial applications. Use of rice husk ash in various products serves to …

Go to article

Extraction Of Lutein Dye From Tagetes Erecta Garland Waste For Green Dyeing Of Hemp Fabric Using Response Surface Methodology, Pisutsaran Chitichotpanya, Nattaya Vuthiganond, Thitirat Inprasit, Benjamas Klaykruayat, Seranee Srisuk Jan 2022

Extraction Of Lutein Dye From Tagetes Erecta Garland Waste For Green Dyeing Of Hemp Fabric Using Response Surface Methodology, Pisutsaran Chitichotpanya, Nattaya Vuthiganond, Thitirat Inprasit, Benjamas Klaykruayat, Seranee Srisuk

Journal of Metals, Materials and Minerals

Large quantities of discarded flowers from religious observances are left at temples and other places of worship, causing global disposal and environmental issues. Recycling and transforming such organic waste into value-added products is one of the most effective and beneficial solutions to the problem. The main goal of this study is to convert the most abundant temple wastes of marigold (Tagetes erecta) flowers into an eco-friendly dyestuff for the textile industry. Our study assessed the suitability of dye extract from garland waste for dyeing hemp fabric and valuated indicators including color strength (K/S) and fastness properties using tannic …

Go to article

Development Of Fexoy Particle Onto Bacterial Cellulose Network By Forced Hydrolysis And Its Electrical Conductivity, Prompong Khamwongsa, Poramed Wongjom, Andi Magattang Gafur Muchlisc, Chun Che Lin, Seranee Srisuk, Sarute Ummartyotin Jan 2022

Development Of Fexoy Particle Onto Bacterial Cellulose Network By Forced Hydrolysis And Its Electrical Conductivity, Prompong Khamwongsa, Poramed Wongjom, Andi Magattang Gafur Muchlisc, Chun Che Lin, Seranee Srisuk, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

FexOy particle and bacterial cellulose composite sheet was successfully prepared by forced hydrolysis. The presence of Fe3+ ions in bacterial cellulose suspension significantly provided the positive charge due to electrostatic force as reported by Zeta potential. With the pH of 12 of bacterial cellulose suspension, particle was nucleated between bacterial cellulose networks. Fourier transform infrared exhibited Fe-O stretching. X-ray diffraction reported that the mixture of Fe2O3 and Fe3O4 was existed onto bacterial cellulose composite. Scanning electron microscope reported that FexOy particle was randomly distributed in bacterial cellulose network. Intensity of Fe was qualitatively observed by energy dispersive analysis. With the …

Go to article

Morphology And Electrochromic Property Of Chemical Bath Deposited Nio Films At Different Niso4 Concentration, Watcharaporn Thongjoon, Kamon Aiempanakit, Itsarapong Chuasontia, Chantana Aiempanakit Jan 2022

Morphology And Electrochromic Property Of Chemical Bath Deposited Nio Films At Different Niso4 Concentration, Watcharaporn Thongjoon, Kamon Aiempanakit, Itsarapong Chuasontia, Chantana Aiempanakit

Journal of Metals, Materials and Minerals

In this study, nickel oxide (NiO) films were prepared on indium tin oxide (ITO) glass by a chemical bath deposition (CBD) at different nickel sulfate (NiSO4) concentrations. The NiO films were verified for their structural properties with field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) while the optical properties were investigated using a spectrophotometer. Moreover, the NiO films were studied to assess their electrochemical properties by cyclic voltammetry in potassium hydroxide (KOH) electrolyte. The results showed that annealed NiO films exhibited the dominant crystal structure of the (111) plane. Meanwhile, the NiSO4 concentration controlled morphological structure between dense …

Go to article

Optimized Parameter Of Dissimilar Joining Between Al6061-T6 And Height-Strength Steel With Friction Stir Spot Welding Process (Fssw), Anusak Silachai, Suriya Prasomthong Jan 2022

Optimized Parameter Of Dissimilar Joining Between Al6061-T6 And Height-Strength Steel With Friction Stir Spot Welding Process (Fssw), Anusak Silachai, Suriya Prasomthong

Journal of Metals, Materials and Minerals

High-strength steel and aluminum alloys are used to manufacture modern vehicles. The objective was to reduce the weight and fuel consumption of the vehicles. In this study the optimum parameters for the friction stir spot welding (FSSW) process between Al6061-T6 aluminum alloy and HSS590 high-strength steel were determined. Response surface methodology based on central composite design (CCD) with three parameters, five levels, and 19 runs was used to conduct experiments and develop mathematical regression models. The three joint parameters were tool speed, welding feed, and dwell time. Analysis of variance was then performed to examine the adequacy of the developed …

Go to article

Synthesis And Characterization Of Hybrid Shell Microcapsules For Anti-Corrosion Ni-Co Coating, Hamed Sadabadi, Saeed Reza Allahkaram, Omid Ghader, Pradeep K. Rohatgi Jan 2022

Synthesis And Characterization Of Hybrid Shell Microcapsules For Anti-Corrosion Ni-Co Coating, Hamed Sadabadi, Saeed Reza Allahkaram, Omid Ghader, Pradeep K. Rohatgi

Journal of Metals, Materials and Minerals

This paper presents the results of the study of microcapsules synthesized using a novel hybrid shell of polyureaformaldehyde/SiO2 (PUF/SiO2) and a core of linseed oil. The synthesis was accomplished by facial polymerization combined with sol-gel of TEOS, and urea-formaldehyde resin to form the hybrid shell under optimal process parameters. The microcapsules were embedded in a metal coating using the electrodeposition method. Microcapsules were characterized by scanning electron microscope (SEM, FE-SEM), energy-dispersive spectroscopy (EDS), particle size analyzer (PSA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The experimental results indicated that the average size of capsules synthesized umder the optimum processing …

Go to article

Dyeing Of Curcumin And Durable Press Finishing With Citric Acid On Cotton Fabric Using One Step Process, Supannee Boonroeng, Piyaporn Kampeerapappun Jan 2022

Dyeing Of Curcumin And Durable Press Finishing With Citric Acid On Cotton Fabric Using One Step Process, Supannee Boonroeng, Piyaporn Kampeerapappun

Journal of Metals, Materials and Minerals

Cotton is an affordable and durable option for clothing. However, cotton garments tend to wrinkle easily. Therefore, cotton fabrics were studied to improve their wrinkle resistance properties. In this work, curcumin was mixed in an aqueous solution of citric acid and its catalyst and applied to cotton fabric using pad-dry-cure process for both the dyeing and finishing properties. Aloe vera extract and chitosan were used to compare for the reaction of their functional groups with carboxyl groups of citric acid on cotton fabrics. The mixture of curcumin and citric acid solution showed anti-wrinkle properties on the treated cotton. There were …

Go to article

Mineralogical Studies And Optimization Of Tabling Parameters Of Low Grade Chromite Ore By Box Behnken Design Of Experiments, Amit Kumar Bhandary, Siddhartha Mukherjee, Rajib Dey, Mahua Ghosh Chaudhuri Jan 2022

Mineralogical Studies And Optimization Of Tabling Parameters Of Low Grade Chromite Ore By Box Behnken Design Of Experiments, Amit Kumar Bhandary, Siddhartha Mukherjee, Rajib Dey, Mahua Ghosh Chaudhuri

Journal of Metals, Materials and Minerals

Chromite ore is geologically associated with gangue materials which have lower density compared to pure chromite (FeO.Cr2O3). Gravity separation techniques are very suitable for beneficiation of low grade chromite ore. In the present study mineralogical analysis of the sample has been carried out by using Wavelength dispersive x-ray fluorescence (WDXRF), X-ray powder diffraction (XRD), Scanning electron microscopy (SEM) and Energy dispersive X-ray (EDX). The beneficiation of low grade (Cr2O3% 26.88) chromite ore has been investigated using wilfley table. Optimization has been carried out using box-behnken statistical design (BBD). The experimental parameters selected are: tilt angle, water flow rate and pre-heat …

Go to article

Magnetic Nanoparticles Coated With Zwitterionic Copolymer As An Advanced Material For Rapid And Instrument-Free Biomolecular Detection In Human Serum, Supannika Boonjamnian, Varunee Sadsri, Voravee P. Hoven, Piyaporn Na Nongkhai Jan 2022

Magnetic Nanoparticles Coated With Zwitterionic Copolymer As An Advanced Material For Rapid And Instrument-Free Biomolecular Detection In Human Serum, Supannika Boonjamnian, Varunee Sadsri, Voravee P. Hoven, Piyaporn Na Nongkhai

Journal of Metals, Materials and Minerals

The traditional agglutination assays especially those based on polystyrene beads have been recognized as convenient tools for disease diagnosis despite their limited detection range and low sensitivity. Unlike other particles namely polystyrene beads, SiO2 and gold nanoparticles having insignificant magnetic properties, magnetic nanoparticles (MNPs) offer unique advantages as their magnetic properties for agglutination methods. In the presence of magnet, not only can they be used to enrich the samples, but also their aggregation can also be induced, providing sensitive and rapid measurements. This work aims to develop MNPs for aggregation-based biomolecular detection. The MNPs were surface-modified with PMAMPC via an …

Go to article

Mechanical Property Evaluation Of Additively Manufactured Materials Across A Wide Temperature Range, Sanket Vinayak Hirve Jan 2022

Mechanical Property Evaluation Of Additively Manufactured Materials Across A Wide Temperature Range, Sanket Vinayak Hirve

Electronic Theses and Dissertations

Additive manufacturing (also called 3d printing) has transitioned from a prototyping-only technology to a technology that is able to create usable parts with complex geometries. 3D printed parts are beginning to be used across all areas of engineering, such as biomedical, aerospace, automobile and many more. Typically, the term “3D printing” refers to layer by layer deposition of polymer materials, while the term “additive manufacturing” refers to layer by layer metal deposition. Conventional manufacturing, or substrative manufacturing, has several main problems that additive manufacturing can help overcome, such as high cost for low volume production, inability to create very complex …

Go to article

Cyclic Voltammetric Simulations On Batteries With Porous Electrodes, Xue-Fan Cai, Sheng Sun Dec 2021

Cyclic Voltammetric Simulations On Batteries With Porous Electrodes, Xue-Fan Cai, Sheng Sun

Journal of Electrochemistry

Lithium-ion batteries (LIBs) are among the most widely used energy storage devices. Whole-cell modeling and simulations of LIBs can optimize the design of batteries with lower costs and higher speeds. The Pseudo-Two-Dimensional (P2D) electrochemical model is among the most famous whole-cell models and widely applied in LIB simulations. P2D model consists of a series of kinetic equations to model Li+/Li diffusion in working/counter electrodes and electrolytes, which are filled in the porous electrodes and separator, and reactions at the interface of electrolyte and active particles. The traditional applications of P2D model, however, are limited to the cases where …

Go to article

Effect Of Aluminum Alloy Surface Modification On Adhesion Of The Modified Polyurethane Coating And Its Corrosion Protective Performance, Xian-Yin Kuang, Shao-Qiang Jin, Yan-Hui Cao, Yan-Mei Zhang, Shi-Gang Dong, Long-Hui Zhu, Li-Wen Lin, Chang-Jian Lin Dec 2021

Effect Of Aluminum Alloy Surface Modification On Adhesion Of The Modified Polyurethane Coating And Its Corrosion Protective Performance, Xian-Yin Kuang, Shao-Qiang Jin, Yan-Hui Cao, Yan-Mei Zhang, Shi-Gang Dong, Long-Hui Zhu, Li-Wen Lin, Chang-Jian Lin

Journal of Electrochemistry

The ordinary organic coatings on aluminum alloy usually encounter a problem of low adhesion to the substrate, which results in destruction and failure of the long-term protective performance of the anticorrosion systems. The surface modification of aluminum alloy is able to enhance the adhesion of organic coating on aluminum alloys, and to improve their protective performance. In this work, a combined surface modification of anodic oxidation and mussel adhesion protein/CeO2/3-aminopropyltriethoxysilane composite film (MCA) was developed on the aluminum alloy. The adhesion of modified polyurethane coated on the treated aluminum alloy and its corrosion protective performance were evaluated comprehensively …

Go to article

Functional Sulfate Electrolytes Enable The Enhanced Cycling Stability Of Nati2(Po4)3/C Anode Material For Aqueous Sodium-Ion Batteries, Shu-Jin Li, Zhi-Kang Cao, Wen-Kai Wang, Xiao-Han Zhang, Xing-De Xiang Dec 2021

Functional Sulfate Electrolytes Enable The Enhanced Cycling Stability Of Nati2(Po4)3/C Anode Material For Aqueous Sodium-Ion Batteries, Shu-Jin Li, Zhi-Kang Cao, Wen-Kai Wang, Xiao-Han Zhang, Xing-De Xiang

Journal of Electrochemistry

Aqueous sodium-ion batteries show promising application in fields of large-scale storage of intermittent renewable energies owing to the earth-abundant sodium resources and incombustible aqueous electrolytes. Primary factors determining whether they can be commercially utilized are low cost and long lifetime. Among current electrode materials, NASICON-type NaTi2(PO4)3 arouses wide interests as an anode material for aqueous sodium-ion batteries as it offers a high specific capacity, fast Na-transport ability and reasonable working potential, however, suffering from insufficient cycling performance caused by severe dissolution of active materials in traditional aqueous electrolytes. In this work, a functional sulfate electrolyte …

Go to article

Influence Of Heat Treatment Time On Cathode Material Cr8O21 For Lithium Battery, Jiu-Kang Teng, Qing-Jie Wang, Liang Zhang, Hong-Mei Zhang, Xiao-Tao Chen, Peng Zhang, Jin-Bao Zhao Dec 2021

Influence Of Heat Treatment Time On Cathode Material Cr8O21 For Lithium Battery, Jiu-Kang Teng, Qing-Jie Wang, Liang Zhang, Hong-Mei Zhang, Xiao-Tao Chen, Peng Zhang, Jin-Bao Zhao

Journal of Electrochemistry

Chromium oxide (Cr8O21) cathode material for lithium batteries was synthesized by thermal decomposition of chromium trioxide (CrO3) at high temperature. The electrochemical properties of chromium oxide depended on the time and temperature during the heat treatment. Pure phase chromium oxide was prepared, and the effects of heat treatment time on the structures and electrochemical properties of Cr8O21 were systematically studied. The first discharge mechanism of chromium oxide in lithium batteries was explored, and the results were similar to that in lithium-sulfur batteries. The crystal phases and electrochemical properties of the prepared …

Go to article

Effect Of Glycol Based Coolant Pollution On Pem Fuel Cells Stack And Recovery Measures, Cong-Yi Zhu, Xiao-Hui Li, Quan-Quan Gan Dec 2021

Effect Of Glycol Based Coolant Pollution On Pem Fuel Cells Stack And Recovery Measures, Cong-Yi Zhu, Xiao-Hui Li, Quan-Quan Gan

Journal of Electrochemistry

As the heat conduction medium of fuel cell cooling system, coolant is very important for the thermal management of fuel cell stack. In practical application, coolant leakage into the stack often occurs. Due to the randomness of fault location of components, the location of coolant leakage is uncertain, which may occur on the cathode side or anode side of some or all single cells. The main effects of coolant pollution on fuel cell stack are as follows: the output of open circuit voltage decreases sharply, the consistency of single cells voltage decreases and so on, which seriously affects the normal …

Go to article

Formation And Morphological Evolution Of Nanoporous Anodized Iron Oxide Films, Jin-Wei Cao, Nan Gao, Zhao-Qing Gao, Chen Wang, Sheng-Yan Shang, Yun-Peng Wang, Hai-Tao Ma Dec 2021

Formation And Morphological Evolution Of Nanoporous Anodized Iron Oxide Films, Jin-Wei Cao, Nan Gao, Zhao-Qing Gao, Chen Wang, Sheng-Yan Shang, Yun-Peng Wang, Hai-Tao Ma

Journal of Electrochemistry

The preparation of iron oxide films with nanoporous structure by anodization has attracted much attention for its potential applications. However, the formation mechanism of porous structure during anodization is still unclear. In this paper, the composition of anodic current during the formation of nanoporous anodized iron oxide film was analyzed in combination with the current density-potential response (I-V curve) and the derivation of Faraday’s law. The results showed that the anodic current consisted of an ionic current (leading to the migration of ions to form oxide) and an electronic current (leading to the oxygen evolution), and the …

Go to article

Copper Nanoparticles In-Situ Anchored On Nitrogen-Doped Carbon For High-Efficiency Oxygen Reduction Reaction Electrocatalyst, Hui-Fang Yuan, Yue Zhang, Xing-Wu Zhai, Li-Bing Hu, Gui-Xian Ge, Gang Wang, Feng Yu, Bin Dai Dec 2021

Copper Nanoparticles In-Situ Anchored On Nitrogen-Doped Carbon For High-Efficiency Oxygen Reduction Reaction Electrocatalyst, Hui-Fang Yuan, Yue Zhang, Xing-Wu Zhai, Li-Bing Hu, Gui-Xian Ge, Gang Wang, Feng Yu, Bin Dai

Journal of Electrochemistry

Compared with noble metal platinum (Pt)-based catalysts, inexpensive non-noble metal electrocatalysts have attracted extensive attention for oxygen reduction reaction (ORR). Herein, chitosan as a kind of biomass resource rich in nitrogen and carbon was used to prepare nitrogen-doped carbon (N-C) and N-C in-situ anchored by copper nanoparticles (Cu/N-C). The as-obtained N-C and Cu/N-C nanoparticles were successfully used as non-noble eletrocatalysts tested for ORR. Compared with the N-C, the Cu/N-C showed the high surface area of 607.3 m 2·g-1 with the mean pore size of 2.5 nm and the pore volume of 0.40 cm3·g-1 …

Go to article

Nitrogen-Sulfur Co-Doped Porous Carbon Preparation And Its Application In Lithium-Sulfur Batteries, Gui-Xiang Zhao, Wail Hafiz Zaki Ahmed, Fu-Liang Zhu Dec 2021

Nitrogen-Sulfur Co-Doped Porous Carbon Preparation And Its Application In Lithium-Sulfur Batteries, Gui-Xiang Zhao, Wail Hafiz Zaki Ahmed, Fu-Liang Zhu

Journal of Electrochemistry

In recent years, lithium-sulfur (Li-S) batteries have been considered as a promising candidate for the next generation of energy storage system due to their ultrahigh theoretical capacity (1675 mAh·g-1) and energy density (2600 Wh·kg-1). However, the practical application of Li-S batteries is seriously limited by their insulating nature of sulfur, the shuttle effect of polysulfides (LiPSs), and volume expansion during charging and discharging. To overcome those disadvantages, one of the commonly methods is to infiltrate sulfur into porous conductive carbon framework, such as porous carbon, hollow carbon spheres, graphene, carbon nanotubes and some composites of the …

Go to article

Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection, Wen-Xia Dong, Guang-Ming Wen, Bin Liu, Zhong-Ping Li Dec 2021

Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection, Wen-Xia Dong, Guang-Ming Wen, Bin Liu, Zhong-Ping Li

Journal of Electrochemistry

Due to the independent form of the light source and detection system, photoelectrochemical (PEC) sensor has the advantages of low background, high sensitivity and simple operation. So far, PEC systems have been widely used in the fields including the actual detection of metal ions, biological antibodies or antigens in environmental pollutants. When the photosensitive material is irradiated by a light source with an energy being equal to or greater than its band gap, electrons (e-) transition occurs from the valence band to the conduction band, leaving a hole (h+), at the same time, the generated electron-hole …

Go to article

Structure Analysis Of Pemfc Cathode Catalyst Layer, Rui-Qing Wang, Sheng Sui Dec 2021

Structure Analysis Of Pemfc Cathode Catalyst Layer, Rui-Qing Wang, Sheng Sui

Journal of Electrochemistry

The sluggish oxygen reduction reaction (ORR) on the cathode of the proton exchange membrane fuel cell (PEMFC) has always been one of the key factors limiting its commercialization. The optimization of the cathode catalytic layer structure plays an important role in improving fuel cell performance and reducing production costs. In this paper, two different catalysts (platinum nanoparticles (Pt-NPs) and platinum nanowires (Pt-NWs)) were prepared by using catalyst coated substrate (CCS) method. By constructing a double-layer catalytic layer structure, we analyzed the effect of different catalytic layer structures by performing a single cell test. The results showed that the dense platinum …

Go to article

Polyvinyl Chloride Gels: Theoretical Modeling Of Their Actuation Mechanism And Characterization Of Their Properties, Zachary Frank Dec 2021

Polyvinyl Chloride Gels: Theoretical Modeling Of Their Actuation Mechanism And Characterization Of Their Properties, Zachary Frank

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyvinyl chloride (PVC) gels are an electroactive polymer smart material which has been considered in a variety of actuator applications. Their large deformation, fast response rates, optical transparency, and soft nature has made them a key area of interest in fields ranging from soft robotics to optics. PVC gels are made from PVC mixed with large quantities of plasticizer, such as dibutyl adipate (DBA). When a voltage is applied, the gel experiences an “anodophilic” deformation (in which it moves preferentially towards the anode). This unique characteristic is the result of a charge buildup near the anode surface, which creates electromechanical …

Go to article

Wear Property Of Machined Ultra High Molecular Weight Polyethylene (Uhmwpe) Acetabular Liner Product With Cnc Milling, W D. Lestari, A T. Danaryanto, A Nugroho, R Ismail, J Jamari, A P. Bayuseno Nov 2021

Wear Property Of Machined Ultra High Molecular Weight Polyethylene (Uhmwpe) Acetabular Liner Product With Cnc Milling, W D. Lestari, A T. Danaryanto, A Nugroho, R Ismail, J Jamari, A P. Bayuseno

Journal of Mechanical Engineering Science and Technology (JMEST)

UHMWPE has been used as a cushion in artificial hip joint for the last decades. The reliability of the components of a hip joint implant can be achieved by understanding their wear behavior. This study observed the tribological performance of the UHMWPE acetabular liner manufactured with a CNC milling machine on the femoral head made of SS 316L. Materials commonly used for tribo pairs in hip joint replacement. The wear tests were performed on a hip joint simulator in dry condition. The wear test is carried out by applying a constant load of 800N. Before and after the wear test, …

Go to article

Characterization Of Bacterial Nanocellulose - Graphite Nanoplatelets Composite Films, Bili Darnanto Susilo, Heru Suryanto, Aminnudin Aminnudin Nov 2021

Characterization Of Bacterial Nanocellulose - Graphite Nanoplatelets Composite Films, Bili Darnanto Susilo, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) was synthesized from pineapple peel extract media with addition of fermentation agent bacteria Acetobacter xylinum. BC was disintegrated from the pellicle into bacterial nanocellulose (BNC) by using a high-pressure homogenizer (hph) machine, which has a three-dimensional woven nanofibrous network. The synthesis of composite films started when BNC, graphite nanoplatelets, and cetyltrimethylammonium bromide (CTAB) were homogenized using an ultrasonic homogenizer then baked on a glass mold at a temperature of 80 degrees Celcius for 14h. A scanning electron microscope (SEM) was used to analyze its morphology. X-Ray diffraction spectra were used to analyze the composite films structure. The …

Go to article

Design Of Shielded Metal Arc Welding Parameters For Optimum Tensile Strength Using Taguchi Method, Moh. Dedy Setiawan, Yanuar Rohmat A. P. Pradana, Suprayitno Suprayitno Nov 2021

Design Of Shielded Metal Arc Welding Parameters For Optimum Tensile Strength Using Taguchi Method, Moh. Dedy Setiawan, Yanuar Rohmat A. P. Pradana, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Shielded Metal Arc Welding (SMAW), an arc welding process, is widely used in applications. In practice, SMAW is widely applied to the welding process on hollow square pipe. Performance expected from this welding is the tensile strength of weld joint. The tensile strength is influenced by parameters process which have possibility for an optimization process to become ‘robust’. Robust is a design which less sensitive to the effect of uncertain quantities or noise factors. Taguchi method is the most efficient optimization method which accommodates the noise factors effect and requires less experiment. This study is focusing on optimizing the welding …

Go to article

Comparative Studies On Combustion Characteristics Of Blended Crude Jatropha Oil With Magnetic Liquid Catalyst And Dex Under Normal Gravity Condition, Hendry Y. Nanlohy Nov 2021

Comparative Studies On Combustion Characteristics Of Blended Crude Jatropha Oil With Magnetic Liquid Catalyst And Dex Under Normal Gravity Condition, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

A comparative study on the combustion characteristics of a single droplet fueled by DEX, crude jatropha oil (CJO), and a mixture of CJO with a magnetic liquid catalyst of rhodium trisulfate has been carried out under normal gravity conditions. The high viscosity of crude jatropha oil makes it difficult to burn under normal conditions (room temperature and atmospheric pressure), therefore the addition of a magnetic liquid catalyst rhodium trisulfate is needed to improve the properties of crude jatropha oil. As a catalyst, rhodium trisulfate has the potential to improve combustion performance while improving the physical properties of crude jatropha oil …

Go to article

Effect Of Variations In Pyrolysis Reactor With Glass Wool Equipped And Without Glass Wool On The Weight Of The Oil Produced, I Gusti Ngurah Nitya Santhiarsa Nov 2021

Effect Of Variations In Pyrolysis Reactor With Glass Wool Equipped And Without Glass Wool On The Weight Of The Oil Produced, I Gusti Ngurah Nitya Santhiarsa

Journal of Mechanical Engineering Science and Technology (JMEST)

Currently, plastic waste is a very serious threat because plastic waste pollution can harm all living things around and also harm the environment. The increasing volume of plastic waste is due to the lack of processing technology, so that the volume of plastic waste is increasing day by day. Plastic is a material that is difficult to decompose because it is non-biodegradable. One application of plastic waste processing technology offered in this study is to use the pyrolysis principle. Pyrolysis is a method of converting plastic into fuel oil through a thermal decomposition process without the use of oxygen. The …

Go to article

Implementation Of Internet Of Things (Iot) In A Plastic Blow Moulding Machine And Its Performance Measurement, Muhammad F. Faqih, Mahros Darsin, Aris Z. Muttaqin, Danang Yudistiro Nov 2021

Implementation Of Internet Of Things (Iot) In A Plastic Blow Moulding Machine And Its Performance Measurement, Muhammad F. Faqih, Mahros Darsin, Aris Z. Muttaqin, Danang Yudistiro

Journal of Mechanical Engineering Science and Technology (JMEST)

Efficiency and effectiveness are indispensable things in the production process. Accurate use of existing resources and the shorter cycle time of production are of particular concern to optimize the production process. This research aims to implement automation to a conventional blow molding. An advanced attempt was carried out to use the Internet of Things (IoT) to increase its efficiency while maintaining the quality of the products. The use of the nodeMCU microcontroller and the blynk application allows the operator to operate the machine without having to come into or having direct contact with the machine. The performance of automation and …

Go to article

Study Of Methanol And Ethanol Absorption On Vacuum Temperature Of Adsorption Cooling Machine Adsorption Cycle, Jhon Sufriadi Purba, Jandri Fan Ht. Saragi Nov 2021

Study Of Methanol And Ethanol Absorption On Vacuum Temperature Of Adsorption Cooling Machine Adsorption Cycle, Jhon Sufriadi Purba, Jandri Fan Ht. Saragi

Journal of Mechanical Engineering Science and Technology (JMEST)

Cooling machines are currently being used more and more in accordance with technological advances and increasing living standards. Common uses are for preserving food, air conditioning, cooling beverages, for making ice cubes, and others. The need for cooling systems in remote areas for various needs such as preservation or storage of food ingredients is felt to be increasing, while the existing conventional cooling systems cannot necessarily be used because not all remote areas have electricity networks, so a simple adsorption cooling system is an alternative for solving problems. A cooling system needs in remote areas like this. The purpose of …

Go to article

Spray Characteristics At Preheating Temperatur Of Diesel-Biodiesel-Gasoline Fuel Blend, Moch. Miftahul Arifin, Nasrul Ilminnafik, Agus Triono Nov 2021

Spray Characteristics At Preheating Temperatur Of Diesel-Biodiesel-Gasoline Fuel Blend, Moch. Miftahul Arifin, Nasrul Ilminnafik, Agus Triono

Journal of Mechanical Engineering Science and Technology (JMEST)

Technological developments in diesel engines require improvements to the fuel injection system to meet the criteria for economical, high-power and efficient combustion and meet environmental regulatory standards. One method that has a lot of interest is changing the characteristics of the fuel, with the aim of producing optimal combustion. Spray characteristics have a big role in determining the quality of combustion in diesel engines. A good spray can improve the quality of fuel atomization and the homogeneity of the air-fuel mixture in the combustion chamber so that it can produce good engine performance and low emissions. This study aims to …

Go to article

First Prev Next Last