Engineering Science and Materials Commons^™

Synthesis And Electrochemical Properties Of Nickel-Rich Cathode Material Lini0.6Co0.2Mn0.2O2 With High Initial Coulombic Efficiency, Xiao-Yun Guan, Chao-Yu Hong, Jian-Ping Zhu, Wei-Li Wang, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

Nickel-rich cathode materials LiNi_0.6Co_0.2Mn_0.2O₂(NCM622)were synthesized by a co-precipitation-solid state sintering method at different temperatures. The structure, morphology and electrochemical performance of the as-prepared materials were investigated by X-ray powder diffraction (XRD) /Rietveld refinement, scanning electron microscope (SEM) and electrochemical experiments. It is found that NCM622 calcined at 800 ℃ showed the lowest degree of cation disorder (~1.97%) with a high initial Coulombic effiency of 92.2% and the capacity retention of 81.4% after 100 cycles.

Electrodeposition Of Cigs Thin Film With Special Structure Using Laser Etching Template, Jin-Zhi Yu, Ye Lian, Jin-Qiu Zhang, Pei-Xia Yang, Mao-Zhong An

Journal of Electrochemistry

Copper indium gallium selenide (Cu_1.00In_xGa_1-xSe_2.00, CIGS) thin film solar cells have a wide application in semiconductor thin film batteries. The CIGS absorbing layer is the key of the thin film solar cell material. Therefore, it is of theoretical and practical significance to carry out researches in CIGS thin films. In this work, the CIGS thin films with special structures were prepared by using laser etching template. The copper thin film was firstly electrodeposited in aqueous solution with Laser etching template. The influences of temperature, current and concentration of copper sulfate on morphology …

Superhydrophobic Surface On Aluminum Alloy By Hydrothermal Method And Its Electrochemical Performance, Xiao-Hang Chen, Mo-Jing Chen, Yu-Lin Min, Qun-Jie Xu

Journal of Electrochemistry

Superhydrophobic film formed on a metal surface is an effective way for corrosion protection. In this paper, the superhydrophobic film was prepared on the surfaces of aluminum alloy by hydrothermally treating with a solution containing CeCl₃·7H₂O and CO(NH₂)₂ , and a self-assemble process. The electrochemical measurements and surface morphology results confirmed that the best superhydrophobicity and electrochemical performance could be achieved with the contact angle of 155.5^o after six hours of hydrothermal reaction. Furthermore, the inhibition efficiency of 99.6% was obtained in 3.5 wt% NaCl aqueous solution, indicating the excellent corrosion resistance …

Intrinsic Kinetic Properties Of Ternary Material For Lithium Ion Batteries Assessed By Single Particle Microelectrode, Yi-Min Wei

Journal of Electrochemistry

Electrochemical performances such as capacity, rate, cycle and thermal stability of the nickel (Ni), cobalt (Co) and manganese (Mn) ternary cathode material, LiNi_xCo_yMn_zO₂ (x + y + z = 1), are significantly influenced by the proportion of Ni, Co, and Mn elements. To obtain higher specific capacity, LiNi_0.6Co_0.2Mn _0.2O₂ (NCM622) and LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) with high amounts of Ni element were employed for the lithium ion batteries. By now, many studies have been focusing on the thermal and cycling stabilities of …

Preparation And Electrocatalytic Activity Of Nitrogen-Doping Tungsten Carbide Catalyst, Pian-Pian Yang, Li-Zhen Huang, Ying-Ying Li, Mei-Qin Shi, Chun-An Ma

Journal of Electrochemistry

Tungsten carbide (WC) is a promising electrocatalyst, however, its electrocatalytic activity is far inferior to Pt and Pt-group metal. In this work, nitrogen-doping tungsten carbide (WN|WC) catalysts with a nanoplate morphology were prepared via the tungsten nitride (WN) as the precursor and sodium tungstate as the tungsten source. The SEM and TEM results indicated that carbon atoms entered into the WN lattice to form the hexagonal close packed WC phase. In this way, an atomic scale heterostructure involving the closely linked interfaces between WN and WC was created . The XRD data confirmed that the cubic crystal structure of WN …

Deposition Mechanism And Coating Characterization For The Trivalent Chromium Electrodeposition In Sulphate Electrolyte, Hui Yan, Shuai-Shuai Huang, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

Linear sweep voltammetry (LSV) and cyclic voltammetry (CV) were used to study the electrodeposition mechanism of trivalent chromium on a copper electrode in the novel sulphate electrolyte for thick trivalent chromium plating. The thickness, morphology, composition, microhardness, and structure, as well as the corrosion resistance in 3.5wt% NaCl solution of the trivalent chromium coatings were investigated by X-ray fluorescence gage, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), microhardness tester, X-ray diffraction (XRD) and Tafel curve measurements. The results showed that the electrodeposition of trivalent chromium involved two consecutive one electron reduction steps. The first step, Cr³⁺ + e …

Applications Of Electrospinning In Lithium-Air Batteries, Yue Fu, Jin Wang, Hai-Yang Yu, Jing-Hua Tian, Rui-Zhi Yang

Journal of Electrochemistry

Lithium-air batteries have received increasing attention as the “ultimate batteries” due to their extremely high theoretical capacity and environment friendly. However, there are still many obstacles hindering the wide applications of the lithium-air batteries owing to the limitations of large charge-discharge over-potentials, poor Columbic efficiency and cycling performance. Exploring of high-efficiency, low-cost and eco-friendly catalysts is one of the vital issues for lithium-air batteries. Meanwhile, electrospinning techniques have been under substantial developments due to its simple fabrication process, high efficiency and production. This paper reviews the recent progresses in fabrications of various novel catalysts for lithium-air batteries with electrospinning techniques, …

An Electrochemical Investigation In The Anticorrosive Properties Of Silver Nanoparticles For The Acidic Corrosion Of Aluminium, H. A. Fetouh, B. A. Abd-El-Nabey, Y. M. Goher, M. S. Karam

Journal of Electrochemistry

The mass loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were used for the determinations of the corrosion rates for aluminium in 1.0 mol·L^-1 hydrochloric acid (HCl) solutions both in the absence and presence of silver nanoparticles (SNPs) at 30 ℃. The protection efficiency was evaluated to be 96.4% for 0.014 g·L^-1 of the SNPs. It has been found that the capacity of the electrical double layer at the aluminium/solution interface was decreased with increasing the concentration of the SNPs, indicating that the SNPs were adsorbed at the aluminium surface. The Langmuir adsorption isotherm and the kinetic-thermodynamic …

Manufacturing A Composite Wheel Prototype Using 3d Printed Molds, Steven Thuening

All Graduate Theses, Dissertations, and Other Capstone Projects

Throughout the evolution of high performance racing, a large emphasis has been on reducing the weight of the vehicle in order to improve its performance. Over the years, new designs and materials have been introduced reducing weight in a variety of different locations. Comparing weight reduced in different areas has shown that some areas are more valuable to reduce than others are. Perhaps one of the most beneficial locations are the wheels. This is because the mass of the wheel is considered unsprung and rotational. Because of this, large improvements towards the reduction of wheel mass have been developed in …

Thermal-Fatigue And Thermo-Mechanical Equivalence For Transverse Cracking Evolution In Laminated Composites, Javier Cabrera Barbero

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon fiber reinforced plastics (CFRP) are potential materials for many aerospace and aeronautical applications due to their high specif strength/weight and a low coeffcient of thermal expansion (CTE) resulting in a high long-term stability. Among candidate structures, the re-entry reusable launch vehicles (RLV), the fuel oxidant storage and transportation at cryogenic temperature, space satellites, and aircraft structure (frame, wings, etc...) can be highlighted. However, CFRP are prone to internal damage as a result of high residual stresses and thermal fatigue loading. In this study, micro-cracking damage evolution in laminated composites subjected to monotonic cooling and thermal cyclic loads is developed …

Characterization Of 3d Printed Polylactic Acid/ Polycaprolactone/Titanium Dioxide Composites For Bone Replacement And Grafting, Sandra Elena Najera Beltran

Open Access Theses & Dissertations

A material that mimics the properties of bones was developed by optimizing the ratio of polymer composites of polylactic acid (PLA) and poly-ε-caprolactone (PCL), containing small amounts of titanium oxide (TiO2). Although titanium-based alloys have commonly been used for bone replacement procedures due to their biocompatibility with the human body and their mechanical properties, stress shielding continues to be a problem. The structure of a bone has a porosity which permits the flow of nutrients, blood, oxygen and minerals, and is an issue at the time of creating bone replacements using conventional methods. PLA and PCL have been used in …

Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study, Hasan Rejoanur Rahman

Open Access Theses & Dissertations

Asphaltenes are a group of planar molecules found in crude oil and are prone to aggregation which often causes blockage of pipes along the oil production stream resulting a huge economic downside. In an effort to understand the hierarchical organization of asphaltene in different solvents and concentrations, the solution structure of various asphaltene solutions were studied using small-angle x-ray scattering (SAXS). Solvents were chosen based on miscibility maps. Such maps are generated on the critical value of the solubility parameter difference between asphaltenes or asphaltene components, and a range of solvents. The critical factors that affect asphaltene and asphaltene component …

Design And Analysis Of A 3d-Printed, Thermoplastic Elastomer (Tpe) Spring Element For Use In Corrective Hand Orthotics, Kevin Thomas Richardson

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis proposes an algorithm that determine the geometry of 3D-printed, custom-designed spring element bands made of thermoplastic elastomer (TPE) for use in a wearable orthotic device to aid in the physical therapy of a human hand exhibiting spasticity after stroke. Each finger of the hand is modeled as a mechanical system consisting of a triple-rod pendulum with nonlinear stiffness at each joint and forces applied at the attachment point of each flexor muscle. The system is assumed quasi-static, which leads to a torque balance between the flexor tendons in the hand, joint stiffness and the design force applied to …

Effects Of Air And Other Gases In The Stabilization Process Of The Superprotonic Phase Of Cesium Dihydrogen Phosphate Within A Hermetically Sealed Chamber, Israel Martinez

Open Access Theses & Dissertations

The solid acid CsH2PO4 (CDP), exhibits a sudden increase in its proton conductivity as it’s heated above a certain temperature (around T~235oC), which makes it a very attractive candidate to be used as an electrolyte in intermediate temperature fuel cells. Unfortunately, at these temperatures the sample is not stable, as starts to dehydrate; which causes a dramatic drop in the proton conductivity over a short period of time (less than one hour). In order to inhibit, or at least delay, the dehydration process, the solid acid it’s put under a saturated water vapor atmosphere. Another method to stabilize the highly …

Implementation Of Magnesium Alloy Az91d On Wire And Arc Additive Manufacturing, David Adrian Martinez Holguin

Open Access Theses & Dissertations

As progress on Additive Manufacturing (AM) techniques focusing on ceramics and polymers evolve, metals continue to be a challenging material to manipulate when fabricating products. Current methods, such as Selective Laser Sintering (SLS) and Electron Beam Melting (EBM) face many intrinsic limitations due to the nature of their processes. Material selection, elevated cost and low deposition rates are some of the barriers to consider when one of these methods is to be used for the fabrication of engineering products. The research here presented demonstrates the use of a Wire and Arc Additive Manufacturing (WAAM) system for the creation of metallic …

Magnetic And Catalytic Properties Of Transition Metal Doped Mos2 Nanocrystals, Luis Martinez

Open Access Theses & Dissertations

Magnetism and catalytic activity of nanoscale layered two-dimensional (2D) transition metal dichalcogenides (TMDs) have gained an increasing research interest in the recent past. To broaden the current knowledge and understanding on this subject, in this work, together with my collaborators, I study the magnetic and electrocatalytic properties of hydrothermally grown pristine and transition metal doped (10% of Co, Ni, Fe and Mn) 2H-MoS2 nanosheets/nanocrystals (NCs), with the particle size of 25-30 nm. A broad range of experimental measurements such as x-ray diffraction, transmission electron microscopy, x-ray photo absorption spectroscopy, Raman spectroscopy, magnetic, catalytic and electron spin resonance have been employed …

Tribological Characterization Of Ti-Based Alloys For Biomedical Applications In Simulated Body Fluid, Edgar Reyes

Open Access Theses & Dissertations

Tribology is a terminology introduced in the 1960's and it is a study that relates to the investigation of the damage of materials. Titanium, as a material used for a wide range of application, it has been brought to the attention of researchers some characteristics such as its much lower density if compared to steel, its capability as an alloying agent with an amount of metals to enhance physical and mechanical properties, to name just a few characteristics. This paper will discuss the performance on tribology behavior in two different Titanium alloys. These Titanium alloys are Ti-6Al-4V (Ti64), and Ti-24Nb-4Zr-8Sn …

Development And Characterization Of Novel Materials For The Advancement Of Additive Manufacturing By Material Extrusion 3d Printing, Jose Gilberto Siqueiros

Open Access Theses & Dissertations

The development of additive manufacturing technologies has been under the spotlight from the past decade due to its enormous potential to disrupt current manufacturing processes. Material extrusion 3D printing (ME3DP) is the most common type of additive manufacturing technology as it experienced an exponential growth after the expiration of the fused deposition modeling patent filed in 1989 by Scott Crump. The large interest behind this technology is generated from the capacity to create complex shapes, rapid prototyping, relatively ease of use, low cost, and high accessibility. The gradual evolution of material extrusion 3D printing calls to become a technology ordinarily …

Tungsten Doping Induced Superior Mechanical Properties Of Hafnium Oxide For Energy Applications, Ann Marie Uribe

Open Access Theses & Dissertations

Hafnium oxide, or hafnia, is a high temperature refractory material with good electrical, chemical, optical, and thermodynamic properties. The effects of dopants have been widely studied, especially after the discovery of ferroelectricity induced in hafnia thin films. While attractive and used in the opto-electronic, memory devices, and semiconductor industries, there is a lack in the literature on enhancing the mechanical properties of hafnium oxide, specifically through doping it with tungsten, another material of interest particularly for future high temperature device applications. Thus, this work aimed to grow hafnia thin films doped with varying amounts of tungsten. The samples were grown …

Heterogeneous Integration Of Metallic, Semiconducting And Dielectric Two-Dimensional Layered Material Inks For Electronics And Sensing Device Platforms, Jay Amrish Desai

Open Access Theses & Dissertations

In monolayers of two-dimensional (2-D) layered materials, the motion of electrons is confined to a 2-D plane yielding a "zero" effective thickness with regard to the electrons. These monolayers are commonly obtained by exfoliating membranes from the bulk crystal to overcome the weak interplanar Van der Waals bonding using the so-called top-down approach. The bottom-up approach is another avenue to realize these materials, where atoms and molecules coalesce together into increasingly larger assemblies for the realization of the bulk three-dimensional (3-D) crystal. The unique properties of many of these 2-D materials make them highly sought out candidates for advancing conventional …

A New Approach To Multiplanar, Real-Time Simulation Of Physiological Knee Loads And Synthetic Knee Components Augmented By Local Composition Control In Fused Filament Fabrication, Joshua Taylor Green

Open Access Theses & Dissertations

Despite numerous advances in biomedical engineering, few developments in surgical simulation have been made outside of computational models. Cadavers remain the primary media on which surgical research and simulation is conducted. Most attempts to quantify the effects of orthopedic surgical methods fail to achieve statistical significance due to limited quantities of cadaver specimen, large variations among the cadaver population, and a lack of repeatability among measurement techniques. The general purpose of the research covered in this dissertation is to develop repeatable simulation of physiological loads and develop techniques to fabricate a synthetic-based replacement of cadaver specimens. Future work applying this …

Structural And Optical Investigations Of Rbxcs1-Xh2po4, Alex D. Price

Open Access Theses & Dissertations

Proton conductor solid acid electrolytes RbxCs1-xH2PO4 (0≤x≤1) have been investigated using second harmonic generation and powder x-ray diffraction. Second harmonic generation is an optical technique which can be used to study the structural properties of materials. Microscopes of this nature have the ability to image objects with a variable penetration depth in a non-destructive manner, allowing for great potential to be used for in situ observations of the electrolyte’s structure when in a fuel cell under operating conditions.

X-ray powder diffraction was carried out on the series of samples and found for values of 0≤x≤0.5 the structure of the material …

Titanium Incorporated Gallium Oxide (Ga-Ti-O): Structure Property Relationship And Performance Evaluation For Extreme Environment Applications, Sandeep Manandhar

Open Access Theses & Dissertations

The existing power generation systems, which utilize fossil fuels, are in dire need of efficient, reliable chemical sensors that can operate safely at higher temperatures. These sensors control the combustion environment and the emissions during combustion. Several sensing materials such as SnO2, ZnO, TiO2, WO3, and Ga2O3 exhibit high sensitivity to certain type of chemical molecules and in a certain range of temperatures. Among these candidate materials, β-Ga2O3 is stable at very high temperatures and has shown functionality for oxygen sensing at higher temperatures (>700°C). However, the response time and sensitivity must be significantly improved in order to derive …

Streamlining Alloy Design And Thermo-Mechanical Processing Parameters For High Strength Line Pipe Steels And Hot Rolled Microalloyed Steels: Process - Structure - Property Paradigm, Venkata Vignesh Natarajan

Open Access Theses & Dissertations

The process parameters related to thermo-mechanical controlled processing (TMCP) of steels play a vital role in affecting the ultimate mechanical properties. We illustrate here the impact of coiling temperature, the impact of finish cooling temperature on interrupted cooling and compare with continuous cooling, and the impact of carbon and niobium on the microstructure and precipitation behavior and corresponding changes in mechanical properties, in an ultrahigh strength titanium-niobium microalloyed steel. The microstructural advancement was contemplated via transmission electron microscopy and electron backscattered diffraction (EBSD). The goal was to underscore the impact of coiling temperature on the nature and distribution of microstructural …

Evaluation Of Large Area Additively Manufactured Fiber Reinforced Acrylonitrile Butadiene Styrene (Abs), Kevin Schnittker

Open Access Theses & Dissertations

To enable the advancement of large-scale additive manufacturing processes, it is necessary to establish and standardize methodologies to characterize the mechanical properties of printed test coupons. Due to the large size of the print beads, conventional test standards are inadequate. The focus of this study was to determine the feasibility of using Digital image correlation (DIC) technology as a key enabler for robust data collection of strain measurements of large 3D printed parts. To incorporate the DIC measurements, a novel method was developed to prepare large 20 wt.% glass filled ABS test coupons for adequate contrast. Through this technique, Poisson's …

Galvanic And Pitting Corrosion Of A Fastener Assembly, Julie Shallman

Williams Honors College, Honors Research Projects

This research focuses on coupled galvanic/pitting corrosion of AA7075 when combined with stainless steel in a fastener assembly. A one-dimensional mathematical model of a well-mixed thin film electrolyte is developed to predict the damage profile of the AA7075 surface when its protective coating is damaged. The damage exposes the galvanic couple. A time dependent system of partial differential equations for potential, chloride concentration, aluminum ion concentration, and damage is developed and solved numerically. Two approaches to calculate the current density within aluminum pits are discussed. The first is a current balance between the cathodic, anodic and passive portions of the …

Consuming Digital Debris In The Plasticene, Stephen R. Parks

Theses and Dissertations

Claims of customization and control by socio-technical industries are altering the role of consumer and producer. These narratives are often misleading attempts to engage consumers with new forms of technology. By addressing capitalist intent, material, and the reproduction limits of 3-D printed objects’, I observe the aspirational promise of becoming a producer of my own belongings through new networks of production. I am interested in gaining a better understanding of the data consumed that perpetuates hyper-consumptive tendencies for new technological apparatuses. My role as a designer focuses on the resolution of not only the surface of the object through 3-D …

Preparation Of Nis2 Nanosheet And Its Application In Asymmetric Supercapacitor, Yuan-You Wang, Ya-Nan Liu, Dang-Qin Jin

Journal of Electrochemistry

In this work, the NiS₂ nanosheets have been synthesized using Ni(OH)₂  as a precursor through a sacrificial template method. The microstructure and chemical composition of as-prepared NiS₂ were characterized by XRD, EDS, BET, SEM and TEM techniques. The results showed that both Ni(OH)₂  and NiS₂  were composed of nanoplates. The electrochemical tests revealed that NiS₂ exhibited the high specific capacitance of 1067.3 F•g^-1 at a current density of 1 A•g^-1 and excellent rate performance. Furthermore, in order to evaluate the practical application of NiS₂, an asymmetric supercapacitor, NiS₂ as …

Electroactivities Of Pd/Fe3O4-C Catalysts For Electro-Oxidation Of Methanol, Ethanol And Propanol, Tao Zou, Qing-Feng Yi, Yuan-Yuan Zhang, Xiao-Ping Liu, Guo-Rong Xu, Hui-Dong Nie, Xiu-Lin Zhou

Journal of Electrochemistry

Development of palladium (Pd) catalysts with high electroactivity for alcohol oxidation is significant for alcohol fuel cells. In this work, Pd nanoparticles were formed by sodium borohydride (NaBH₄) reduction method and subsequently deposited on the surface of carbon supported ferriferrous oxide (Fe₃O₄/C) composites to obtain the Pd/Fe₃O₄-C catalysts with different Fe₃O₄ loadings. Their transmission electron microscopic (TEM) images show that the Pd nanoparticles were uniformly dispersed on the Fe₃O₄/C. Electroactivities of the prepared Pd/Fe₃O₄-C catalysts toward oxidations of C1-C3 …

Kinetics And Mechanism Toward Electrochemical Reductions Of Sodium Bromide And Methanol Over Iron Electrodes, Qun Liao, Shu-Feng Zhang, Wen-Hua Leng

Journal of Electrochemistry

It is of technological value and scientific interest to the electro-synthesis of ferrocene, conversion of carbon dioxide (CO₂) and organic electro-synthesis in non-aqueous solutions by investigating the kinetics and mechanism toward electrochemical reductions of sodium bromide (NaBr) and methanol over iron electrodes. However, few reports in the related researches are available. In this article, the kinetics and mechanism toward electrochemical reductions of NaBr and methanol over iron electrodes were examined in detail by carrying out the polarization curve and electrochemical impedance spectroscopic measurements. The results showed that methanol was the reactant, while Na⁺ ions were functioned only …